aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-05-13Merge branches 'cxgb3' and 'mlx4' into for-linusRoland Dreier
2009-05-07IB/mlx4: Don't overwrite fast registration page list when posting work requestJack Morgenstein
The low-level mlx4 driver modified the page-list addresses for fast register work requests post send to big-endian, and set a "present" bit. This caused problems later when the consumer attempted to unmap the pages using the page-list (using the list addresses which were assumed to be still in CPU-endian order). Fix the mlx4 driver to allocate two buffers and use a private buffer for the hardware-format bus addresses. This patch fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1571>, an NFS/RDMA server crash. The cause of the crash was found by Vu Pham of Mellanox. The fix is along the lines suggested by Steve Wise in comment #21 in bug 1571. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-29RDMA/cxgb3: Don't complete flushed send work requests twiceSteve Wise
When the SQ is flushed, mark the flushed entries as not signaled so the poll logic doesn't re-insert the CQ entry thinking its an out of order completion. The bug can cause the NFS/RDMA server to crash due to processing the same completed work request twice. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-28Merge branch 'drm-intel-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: fix up error path leak in i915_cmdbuffer drm/i915: fix unpaired i915 device mutex on entervt failure. drm/i915: add support for G41 chipset drm/i915: Enable ASLE if present drm/i915: Unregister ACPI video driver when exiting drm/i915: Register ACPI video even when not modesetting drm/i915: fix transition to I915_TILING_NONE drm/i915: Don't let an oops get triggered from irq_emit without dma init. drm/i915: allow tiled front buffers on 965+
2009-04-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (21 commits) RDMA/nes: Update iw_nes version RDMA/nes: Fix error path in nes_accept() RDMA/nes: Fix hang issues for large cluster dynamic connections RDMA/nes: Increase rexmit timeout interval RDMA/nes: Check for sequence number wrap-around RDMA/nes: Do not set apbvt entry for loopback RDMA/nes: Fix unused variable compile warning when INFINIBAND_NES_DEBUG=n RDMA/nes: Fix fw_ver in /sys RDMA/nes: Set trace length to 1 inch for SFP_D RDMA/nes: Enable repause timer for port 1 RDMA/nes: Correct CDR loop filter setting for port 1 RDMA/nes: Modify thermo mitigation to flip SerDes1 ref clk to internal RDMA/nes: Fix resource issues in nes_create_cq() and nes_destroy_cq() RDMA/nes: Remove root_256()'s unused pbl_count_256 parameter mlx4_core: Fix memory leak in mlx4_enable_msi_x() IB/mthca: Fix timeout for INIT_HCA and a few other commands RDMA/cxgb3: Don't zero QP attrs when moving to IDLE RDMA/nes: Fix bugs in nes_reg_phys_mr() RDMA/nes: Fix compiler warning at nes_verbs.c:1955 IPoIB: Disable NAPI while CQ is being drained ...
2009-04-28m68k: arch/m68k/kernel/sun3-head.S needs <linux/init.h>Geert Uytterhoeven
Fix this: arch/m68k/kernel/sun3-head.S: Assembler messages: arch/m68k/kernel/sun3-head.S:32: Error: Unknown operator -- statement `__head' ignored Introduced by commit 6f335cab0431d5df4995bcd4fd952d4c746d5a86 ("m68k: convert to use __HEAD and HEAD_TEXT macros."), which started using __HEAD without adding the appropriate include. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-28Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: bio: fix memcpy corruption in bio_copy_user_iov() hd: fix locking mg_disk: fix CONFIG_LBD=y warning mg_disk: fix locking
2009-04-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: Fix default constraints for fixed voltage regulators regulator/bq24022: fix bug in is_enabled function regulator/virtual: fix strings compare predicates regulator core: fix double-free in regulator_register() error path drivers/regulator: fix when type is different from REGULATOR_VOLTAGE or REGULATOR_CURRENT unreachable code in drms_uA_update() regulator: fix header file missing kernel-doc
2009-04-28Merge branches 'cxgb3', 'ipoib', 'mthca', 'mlx4' and 'nes' into for-linusRoland Dreier
2009-04-28Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc/ps3: Fix build error on UP powerpc/cell: Select PCI for IBM_CELL_BLADE AND CELLEB powerpc: ppc32 needs elf_read_implies_exec() powerpc/86xx: Add device_type entry to soc for ppc9a powerpc/44x: Correct memory size calculation for denali-based boards maintainers: Fix PowerPC 4xx git tree powerpc: fix for long standing bug noticed by gcc 4.4.0 Revert "powerpc: Add support for early tlbilx opcode"
2009-04-28powerpc: Revert switch to TEXT_TEXT in linker scriptTim Abbott
Commit edada399 broke the build on 64-bit powerpc because it moved the __ftr_alt_* sections of a file away from the .text section, causing link failures due to relative conditional branch targets being too far away from the branch instructions. This happens on pretty much all 64-bit powerpc configs. This change reverts commit edada399 while preserving the update from the *.refok sections to .ref.text that has happened since. Signed-off-by: Tim Abbott <tabbott@mit.edu> Requested-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-28bio: fix memcpy corruption in bio_copy_user_iov()FUJITA Tomonori
st driver uses blk_rq_map_user() in order to just build a request out of page frames. In this case, map_data->offset is a non zero value and iov[0].iov_base is NULL. We need to increase nr_pages for that. Cc: stable@kernel.org Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-28hd: fix lockingTejun Heo
hd dance around local irq and HD_IRQ enable without achieving much. It ends up transferring data from irq handler with both local irq and HD_IRQ disabled. The only place it actually does something is while transferring the first block of a request which it does with HD_IRQ disabled but local irq enabled. Unfortunately, the dancing is horribly broken from locking POV. IRQ and timeout handlers access block queue without grabbing the queue lock and running the driver in SMP configuration crashes the whole machine pretty quickly. Remove meaningless irq enable/disable dancing and add proper locking in issue, irq and timeout paths. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28mg_disk: fix CONFIG_LBD=y warningBartlomiej Zolnierkiewicz
drivers/block/mg_disk.c: In function ‘mg_dump_status’: drivers/block/mg_disk.c:265: warning: format ‘%ld’ expects type ‘long int’, but argument 2 has type ‘sector_t’ [ Impact: kill build warning ] Cc: unsik Kim <donari75@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28mg_disk: fix lockingTejun Heo
IRQ and timeout handlers call functions which expect locked queue lock without locking it. Fix it. While at it, convert 0s used as null pointer constant to NULLs. [ Impact: fix locking, cleanup ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: unsik Kim <donari75@gmail.com>
2009-04-28regulator: Fix default constraints for fixed voltage regulatorsMark Brown
Default voltage constraints were being provided for fixed voltage regulator where board constraints were not provided but these constraints used INT_MIN as the default minimum voltage which is not a valid value since it is less than zero. Use 1uV instead. Also set the default values we set in the constraints themselves since otherwise the max_uV constraint we determine will not be stored in the actual constraint strucutre and will therefore not be used. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28regulator/bq24022: fix bug in is_enabled functionPhilipp Zabel
This seems to be fallout from last October's regulator core rework. It got noticed only because of recent regulator framework changes. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28regulator/virtual: fix strings compare predicatesMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28regulator core: fix double-free in regulator_register() error pathPaul Walmsley
During regulator registration, any error after device_register() will cause a double-free on the struct regulator_dev 'rdev'. The bug is in drivers/regulator/core.c:regulator_register(): ... scrub: device_unregister(&rdev->dev); clean: kfree(rdev); <--- rdev = ERR_PTR(ret); goto out; ... device_unregister() calls regulator_dev_release() which frees rdev. The subsequent kfree corrupts memory and causes some OMAP3 systems to oops on boot in regulator_get(). Applies against 2.6.30-rc3. Signed-off-by: Paul Walmsley <paul@pwsan.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28drivers/regulator: fix when type is different from REGULATOR_VOLTAGE or ↵Diego Liziero
REGULATOR_CURRENT When regulator_desc->type is something different from REGULATOR_VOLTAGE or REGULATOR_CURRENT the if should probably return ERR_PTR(-EINVAL) The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) @@ expression E; constant C; @@ ( - !E == C + E != C ) Signed-off-by: Diego Liziero <diegoliz@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28unreachable code in drms_uA_update()Dan Carpenter
I removed the extra semi-colon and indented the return statement. The unreachable code was found by smatch (http://repo.or.cz/w/smatch.git). The patch was compile tested. regards, dan carpenter Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28regulator: fix header file missing kernel-docRandy Dunlap
Add regulator header file missing kernel-doc: Warning(include/linux/regulator/driver.h:117): No description found for parameter 'set_mode' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Liam Girdwood <lrg@slimlogic.co.uk> cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28powerpc/ps3: Fix build error on UPGeoff Levand
A non-SMP version of smp_send_stop() is now included in smp.h. Remove the unneeded definition in the PS3 smp.c. Fixes build errors like these when CONFIG_SMP=n: arch/powerpc/platforms/ps3/setup.c:49: error: redefinition of 'smp_send_stop' include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-28powerpc/cell: Select PCI for IBM_CELL_BLADE AND CELLEBMichael Ellerman
Currently PPC_CELL_NATIVE selects PPC_OF_PLATFORM_PCI, but does not select PCI. This can lead to a config with the former and the latter disabled, which does not build. To fix this PPC_CELL_NATIVE should select PCI. However, that would force PCI on for QPACE, which also selects PPC_CELL_NATIVE. So instead move the select of PPC_OF_PLATFORM_PCI and PCI under both IBM_CELL_BLADE and CELLEB. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-28powerpc: ppc32 needs elf_read_implies_exec()Kumar Gala
On ppc64 we implemented elf_read_implies_exec() for 32-bit binaries because old toolchains had bugs where they didn't mark program segments executable that needed to be. For some reason we didn't do this on ppc32 builds. This hadn't been an issue until commit 8d30c14c ("powerpc/mm: Rework I$/D$ coherency (v3)"), which had as a side effect that we are now enforcing execute permissions to some extent on 32-bit 4xx and Book E processors. This fixes it by defining elf_read_implies_exec on 32-bit to turn on the read-implies-exec behaviour on programs that are sufficiently old that they don't have a PT_GNU_STACK program header. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-27Remove unused support code for refok sections.Tim Abbott
The old refok sections .text.init.refok .data.init.refok .exit.text.refok have been deprecated since commit 312b1485fb509c9bc32eda28ad29537896658cb8. After the other patches in this patch series nothing is put in these sections, so clean things up by eliminating all the remaining references to them. Signed-off-by: Tim Abbott <tabbott@mit.edu> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-27sparc: cleanup references to deprecated .text.init* sections.Tim Abbott
The section .text.init.refok is deprecated and __REF (.ref.text) should be used in assembly files instead. This patch cleans up a few uses of .text.init.refok in the sparc architecture. Also fix a reference to .text.init in a comment that wasn't updated to .init.text. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: David S. Miller <davem@davemloft.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-27sh: Use __INIT macro instead of .text.init.Tim Abbott
The sh architecture has some code in the .text.init section, but it does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott <tabbott@mit.edu> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-27powerpc: Use __REF macro instead of old .text.init.refok.Tim Abbott
The section .text.init.refok is deprecated and __REF (.ref.text) should be used in assembly files instead. This patch cleans up a few uses of .text.init.refok in the powerpc architecture. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-27powerpc: Use TEXT_TEXT macro in linker script.Tim Abbott
Rather than adding .ref.text to the powerpc linker script so that we can use __REF on the powerpc architecture, it seems simpler to switch to using the generic TEXT_TEXT macro. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-27arm: Use __INIT macro instead of .text.init.Tim Abbott
arm is placing some code in the .text.init section, but it does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott <tabbott@mit.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-27FRV: Use __INIT macro instead of .text.init.Tim Abbott
FRV is placing some code in the .text.init section but does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott <tabbott@mit.edu> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-27FRV: Remove unused header asm/init.h.Tim Abbott
It seems nothing has included the frv asm/init.h header for some time, and its actual contents are out of date with include/linux/init.h. So just delete it. Signed-off-by: Tim Abbott <tabbott@mit.edu> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-28Merge branch 'merge' of ↵Paul Mackerras
git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge
2009-04-27RDMA/nes: Update iw_nes versionChien Tung
Update version number to 1.5.0.0 Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Fix error path in nes_accept()Faisal Latif
If reg_phys_mem() fails, we need to free memory allocated for MPA frame with private data before returning the error. Also move nes_add_ref() after the reg_phys_mem() is successful. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Fix hang issues for large cluster dynamic connectionsFaisal Latif
Running large cluster setup, we are hanging after many hours of testing. Fixing this required going over the code and making sure the rexmit entry was properly removed based on the cm_node's state and packet received. Also when receiving a FIN packet, check seq# and make sure there were no errors before calling handle_fin(). Following are the changes done in nes_cm.c: * handle_ack_pkt() needs to return error value, so in case of error, handle_fin() is not called. Some cleanup done while going over the code. * handle_rst_pkt(), handling of cm_node's NES_CM_STATE_LAST_ACK is missing. * process_packet(), in case of FIN only packet is received, call check_seq() before processing. * in handle_fin_pkt(), we are calling cleanup_retrans_entry() for all conditions, even if the packets need to be dropped. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Increase rexmit timeout intervalFaisal Latif
Under heavy load with large cluster testing, it may take longer to receive a response to MPA requests. Change the driver to wait longer after each rexmit to max time value. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Check for sequence number wrap-aroundFaisal Latif
check_seq() was not checking if the seq#s have wrapped. Fix it. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Do not set apbvt entry for loopbackFaisal Latif
When a connect request comes, apbvt should only be set for non-loopback connections. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Fix unused variable compile warning when INFINIBAND_NES_DEBUG=nChien Tung
Remove the NES_DEBUG that is causing the compile warning about an unused variable when INFINIBAND_NES_DEBUG is not enabled. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Fix fw_ver in /sysChien Tung
/sys/class/infiniband/nes?/fw_ver is not displaying firmware version properly (it shows 0.0.0 with the current code). Fill in the correct firmware version number. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Set trace length to 1 inch for SFP_DChien Tung
With updated PHY firmware for SFP_D, setting the trace length to 1 inch for SFP_D provides a more stable link. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Enable repause timer for port 1Chien Tung
Enable repause timer for port 1. Without this setting, under stress, the chip may misbehave. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Correct CDR loop filter setting for port 1Chien Tung
In commit 1b949324 ("RDMA/nes: Fix SFP+ PHY initialization") there is a mistake in the clean up code that removed port 1 CDR loop filter settings for 10G cards other than CX4. Put the correct setting back for appropriate PHY types. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Modify thermo mitigation to flip SerDes1 ref clk to internalChien Tung
Change thermo mitigation code to flip the SerDes1 reference clock to internal, to match the change in commit a4849fc1 ("RDMA/nes: Add wide_ppm_offset parm for switch compatibility"). Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27Revert "linux.conf.au 2009: Tuz"Linus Torvalds
This reverts commit 8032b526d1a3bd91ad633dd3a3b5fdbc47ad54f1. Hey, it was only meant to be a single release. Now they can all die as far as I'm concerned. [ Just kidding. They're cute and cuddly. Except when they have horrible nasty facial diseases. Oh, and I guess they're not actually that cuddly even when disease-free. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: only save/restore existent registers in the PCIe capability x86/PCI: don't bother with root quirks if _CRS is used docbooks: add/fix PCI kernel-doc PCI: cleanup debug output resources x86/PCI: set_pci_bus_resources_arch_default cleanups x86/PCI: Move set_pci_bus_resources_arch_default into arch/x86 x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case PCI quirk: disable MSI on VIA VT3364 chipsets
2009-04-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: look for acls during btrfs_read_locked_inode Btrfs: fix acl caching Btrfs: Fix a bunch of printk() warnings. Btrfs: Fix a trivial warning using max() of u64 vs ULL. Btrfs: remove unused btrfs_bit_radix slab Btrfs: ratelimit IO error printks Btrfs: remove #if 0 code Btrfs: When shrinking, only update disk size on success Btrfs: fix deadlocks and stalls on dead root removal Btrfs: fix fallocate deadlock on inode extent lock Btrfs: kill btrfs_cache_create Btrfs: don't export symbols Btrfs: simplify makefile Btrfs: try to keep a healthy ratio of metadata vs data block groups
2009-04-27powerpc/86xx: Add device_type entry to soc for ppc9aMartyn Welch
The 'device_type = "soc";' line *is* needed in the DTS for get_immrbase() to return the correct address. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 03:53:27 +0000