aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-07-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (33 commits) xtensa: use DATA_DATA in xtensa powerpc: add missing DATA_DATA to powerpc cris: use DATA_DATA in cris kallsyms: remove usage of memmem and _GNU_SOURCE from scripts/kallsyms.c kbuild: use -fno-optimize-sibling-calls unconditionally kconfig: reset generated values only if Kconfig and .config agree. kbuild: fix the warning when running make tags kconfig: strip 'CONFIG_' automatically in kernel configuration search kbuild: use POSIX BRE in headers install target Whitelist references from __dbe_table to .init modpost white list pattern adjustment kbuild: do section mismatch check on full vmlinux kbuild: whitelist references from variables named _timer to .init.text kbuild: remove hardcoded _logo names from modpost kbuild: remove hardcoded apic_es7000 from modpost kbuild: warn about references from .init.text to .exit.text kbuild: consolidate section checks kbuild: refactor code in modpost to improve maintainability kbuild: ignore section mismatch warnings originating from .note section kbuild: .paravirtprobe section is obsolete, so modpost doesn't need to handle it ...
2007-07-19Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (44 commits) i2c: Delete the i2c-isa pseudo bus driver hwmon: refuse to load abituguru driver on non-Abit boards hwmon: fix Abit Uguru3 driver detection on some motherboards hwmon/w83627ehf: Be quiet when no chip is found hwmon/w83627ehf: No need to initialize fan_min hwmon/w83627ehf: Export the thermal sensor types hwmon/w83627ehf: Enable VBAT monitoring hwmon/w83627ehf: Add support for the VID inputs hwmon/w83627ehf: Fix timing issues hwmon/w83627ehf: Add error messages for two error cases hwmon/w83627ehf: Convert to a platform driver hwmon/w83627ehf: Update the Kconfig entry make coretemp_device_remove() static hwmon: Add LM93 support hwmon: Improve the pwmN_enable documentation hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPM hwmon: Add support for newer uGuru's hwmon/f71805f: Add temperature-tracking fan control mode hwmon/w83627ehf: Preserve speed reading when changing fan min hwmon: fix detection of abituguru volt inputs ... Manual fixup of trivial conflict in MAINTAINERS file
2007-07-19random: fix bound check ordering (CVE-2007-3105)Matt Mackall
If root raised the default wakeup threshold over the size of the output pool, the pool transfer function could overflow the stack with RNG bytes, causing a DoS or potential privilege escalation. (Bug reported by the PaX Team <pageexec@freemail.hu>) Cc: Theodore Tso <tytso@mit.edu> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: ->fallocate() support
2007-07-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-schedLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: [PATCH] sched: implement cpu_clock(cpu) high-speed time source [PATCH] sched: fix the all pinned logic in load_balance_newidle() [PATCH] sched: fix newly idle load balance in case of SMT [PATCH] sched: sched_cacheflush is now unused
2007-07-19user namespace: fix copy_user_ns return valueSerge E. Hallyn
When a CONFIG_USER_NS=n and a user tries to unshare some namespace other than the user namespace, the dummy copy_user_ns returns NULL rather than the old_ns. This value then gets assigned to task->nsproxy->user_ns, so that a subsequent setuid, which uses task->nsproxy->user_ns, causes a NULL pointer deref. Fix this by returning old_ns. Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19slub: fix ksize() for zero-sized pointersLinus Torvalds
The slab and slob allocators already did this right, but slub would call "get_object_page()" on the magic ZERO_SIZE_PTR, with all kinds of nasty end results. Noted by Ingo Molnar. Cc: Ingo Molnar <mingo@elte.hu> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19Fix up non-NUMA SLAB configuration for zero-sized allocationsLinus Torvalds
I suspect Christoph tested his code only in the NUMA configuration, for the combination of SLAB+non-NUMA the zero-sized kmalloc's would not work. Of course, this would only trigger in configurations where those zero- sized allocations happen (not very common), so that may explain why it wasn't more widely noticed. Seen by by Andi Kleen under qemu, and there seems to be a report by Michael Tsirkin on it too. Cc: Andi Kleen <ak@suse.de> Cc: Roland Dreier <rdreier@cisco.com> Cc: Michael S. Tsirkin <mst@dev.mellanox.co.il> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19[PATCH] sched: implement cpu_clock(cpu) high-speed time sourceIngo Molnar
Implement the cpu_clock(cpu) interface for kernel-internal use: high-speed (but slightly incorrect) per-cpu clock constructed from sched_clock(). This API, unused at the moment, will be used in the future by blktrace, by the softlockup-watchdog, by printk and by lockstat. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-19[PATCH] sched: fix the all pinned logic in load_balance_newidle()Suresh Siddha
nr_moved is not the correct check for triggering all pinned logic. Fix the all pinned logic in the case of load_balance_newidle(). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-19[PATCH] sched: fix newly idle load balance in case of SMTSuresh Siddha
In the presence of SMT, newly idle balance was never happening for multi-core and SMP domains (even when both the logical siblings are idle). If thread 0 is already idle and when thread 1 is about to go to idle, newly idle load balance always think that one of the threads is not idle and skips doing the newly idle load balance for multi-core and SMP domains. This is because of the idle_cpu() macro, which checks if the current process on a cpu is an idle process. But this is not the case for the thread doing the load_balance_newidle(). Fix this by using runqueue's nr_running field instead of idle_cpu(). And also skip the logic of 'only one idle cpu in the group will be doing load balancing' during newly idle case. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-19[PATCH] sched: sched_cacheflush is now unusedRalf Baechle
Since Ingo's recent scheduler rewrite which was merged as commit 0437e109e1841607f2988891eaa36c531c6aa6ac sched_cacheflush is unused. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-19i2c: Delete the i2c-isa pseudo bus driverJean Delvare
There are no users of i2c-isa left, so we can finally get rid of it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon: refuse to load abituguru driver on non-Abit boardsHans de Goede
With this patch the abituguru refuses to load on non Abit motherboards, as discussed in lkml CONFIG_BREAK_MY_MACHINE thread. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: fix Abit Uguru3 driver detection on some motherboardsHans de Goede
This patch changes the driver to also detect uguru3's which hold 0x08 at DATA initially, as has been reported here: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=220160 Also when an uguru3's holds 0x0014 in the ID register it will now report "Abit AB9 Pro" as motherboard identification. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Be quiet when no chip is foundJean Delvare
This fixes bug #8593: http://bugzilla.kernel.org/show_bug.cgi?id=8593 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: No need to initialize fan_minJean Delvare
We don't need to initialize fan_min in this driver, as the fan_div attributes are read-only. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Export the thermal sensor typesJean Delvare
Add support for the w83627ehf thermal sensor types. I made them read-only, as the BIOS is supposed to set them up properly. This information makes it easier to find out which temperature channel corresponds to the CPU. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Enable VBAT monitoringJean Delvare
If VBAT monitoring is disabled, enable it. Original patch from an anonymous contributor on the lm-sensors trac system: http://lm-sensors.org/ticket/2218 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Add support for the VID inputsJean Delvare
The W83627EHF and similar chips have 6 VID input pins, add support for them. The driver changes the input voltage level automatically if the current setting is not correct for the detected CPU model. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Fix timing issuesJean Delvare
* I have experimental evidence that the W83627EHG needs more than 1 second to refresh all the measured values. Increase the caching time to 1.5 second. * When changing a fan clock divider, the corresponding fan speed measurement register is no longer valid, until the next time the chip will refresh it. One way to fix this is to pretend that the cache is still valid for one more period (1.5 second.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Add error messages for two error casesDavid Hubbard
If the Super-I/O device is disabled, it is likely the BIOS has a good reason for leaving it disabled, so give a warning when enabling it -- it's not likely to be wired correctly or be able to give good data. Also, if the Super-I/O device is configured with an address of 0, the driver refuses to initialize it. Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Convert to a platform driverDavid Hubbard
Remove i2c-isa from the w83627ehf driver, and use a platform driver instead. Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Update the Kconfig entryDavid Hubbard
Add description for the W83627DHG chip to Kconfig. Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19make coretemp_device_remove() staticAdrian Bunk
coretemp_device_remove() can become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: Add LM93 supportHans-Jürgen Koch
This patch adds support for the LM93 hardware monitoring chip. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: Improve the pwmN_enable documentationJean Delvare
The documentation of the pwmN_enable interface file is not very clear, and has been confusing several driver authors already. Make it clearer. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPMJean Delvare
Also protects ourselves against a possible division by zero. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: Add support for newer uGuru'sHans de Goede
This patch adds a new driver for the hardware monitoring features of the third revision of the Abit uGuru chip, found on recent Abit motherboards. This is an entirely different beast then the first and second revision (its again a winbond microcontroller, but the "protocol" to talk to it and the bank addresses are very different. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/f71805f: Add temperature-tracking fan control modePhil Endecott
Add support for the "temperature mode" fan speed control. In this mode, the user can define 3 temperature/speed trip points, and the chip will set the speed automatically according to the temperature changes. Signed-off-by: Phil Endecott <kernel@chezphil.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Preserve speed reading when changing fan minJean Delvare
The w83627ehf driver changes the fan clock divider automatically when a new min fan speed is set. It is supposed to preserve the fan speed reading while doing so, bug doesn't really. Fix it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: fix detection of abituguru volt inputsHans de Goede
This patch fixes the detection of volt inputs with a reading of more then 240 units. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: add SCH5317 to smsc47b397 driverJuerg Haefliger
This patch adds the SMSC SCH5317 chip (device ID 0x85) as a supported device to the smsc47b397 driver. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: convert it87 to platform drivercorentin.labbe
This is the patch for converting it87 to a platform driver (and remove i2c-isa). Signed-off-by: Corentin LABBE <corentin.labbe@geomatys.fr> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: Fix a potential race condition on unloadJean Delvare
Fix a potential race condition when some hardware monitoring platform drivers are being unloaded. I believe that the driver data pointer shouldn't be cleared before all the sysfs files are removed, otherwise a sysfs callback might attempt to dereference a NULL pointer. I'm not sure exactly what the driver core protects drivers against, so let's play it safe. While we're here, clear the driver data pointer when probe fails, so as to not leave an invalid pointer behind us. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: Convert vt8231 to a platform driverRoger Lucas
Convert the vt8231 driver from the nonsensical i2c-isa hack to a regular platform driver. Signed-off-by: Roger Lucas <roger@planbit.co.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/sis5595: Use PCI_REVISION_IDJean Delvare
Use PCI_REVISION_ID instead of our own define. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/sis5595: Use dynamic sysfs callbacksJean Delvare
This lets us get rid of macro-generated functions and shrinks the driver size by about 7%. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/sis5595: Convert to a platform driverJean Delvare
Convert the sis5595 driver from the nonsensical i2c-isa hack to a regular platform driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/via686a: Use dynamic sysfs callbacksJean Delvare
This lets us get rid of macro-generated functions and shrinks the driver size by about 9%. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/via686a: Convert to a platform driverJean Delvare
Convert the via686a driver from the nonsensical i2c-isa hack to a regular platform driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/via686a: Temperature interrupt configuration fixJean Delvare
Fix the writing of the temperature interrupt configuration. The old code was working only by accident. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/w83627hf: Add PWM frequency selection supportCarlos Olalla Martinez
Signed-off-by: Carlos Olalla <com.ea@tinet.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/it87: Add IT8726F supportRudolf Marek
Add support for IT8726F chip driver, which is just same as IT8716F with additional glue logic for AMD power sequencing. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon: Fault files naming conventionJean Delvare
We have the following naming convention documented in Documentation/hwmon/sysfs-interface for fault files: in[0-*]_input_fault fan[1-*]_input_fault temp[1-*]_input_fault Some drivers follow this convention (lm63, lm83, lm90, smsc47m192). However some drivers omit the "input" part and create files named fan1_fault (pc87427) or temp1_fault (dme1737). And the new "generic" libsensors follows this second (non-standard) convention, so it fails to report fault conditions for drivers which follow the standard. We want a single naming scheme, and everyone seems to prefer the shorter variant, so let's go for it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/lm90: Add support for the Maxim MAX6680/MAX6681Rainer Birkenmaier
Signed-off-by: Rainer Birkenmaier <rainer.birkenmaier@siemens.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon: Use platform_device_add_data()Jean Delvare
Use platform_device_add_data() in hardware monitoring drivers. This makes the code nicer and smaller too. Reported by David Hubbard. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Hubbard <david.c.hubbard@gmail.com>
2007-07-19hwmon/pc87360: Convert to a platform driverJean Delvare
Convert the pc87360 driver from the nonsensical i2c-isa hack to a regular platform driver. This is a direct conversion, other cleanups could happen on top of that. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jim Cromie <jim.cromie@gmail.com>
2007-07-19hwmon/dme1737: Add documentationJuerg Haefliger
Add documentation for the new SMSC DME1737 driver. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon: New SMSC DME1737 driverJuerg Haefliger
Add support for the hardware monitoring and fan control capabilities of the SMSC DME1737 and Asus A8000 Super-I/O chips. The hardware monitoring logic of this chip is similar to the LM85 but has some additional features that this driver supports. Even though it's a Super-I/O chip, the hardware monitoring logic can only be accessed via SMBus. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 11:08:39 +0000