aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-02-05remove NETIF_F_TSO ifdeferyArjan van de Ven
Remove the NETIF_F_TSO #ifdef-ery in drivers/net; this was for old-old-2.4 compat (even current 2.4 has NETIF_F_TSO) but it's time to get rid of it by now. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet RX Debugging printoutLinas Vepstas
Add some debugging and error printing. The show_rx_chain() prints out the status of the rx chain, which shows that the status of the descriptors gets messed up after the second & subsequent RX ramfulls. Print out contents of bad packets if error occurs. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet Avoid possible RX chain corruptionLinas Vepstas
Delete possible source of chain corruption; the hardware already knows the location of the tail, and writing it again is likely to mess it up. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet Memory barrierLinas Vepstas
Add memory barrier to make sure that the rest of the RX descriptor state is flushed to memory before we tell the hardware that its ready to go. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet RX Chain tailLinas Vepstas
Tell the hardware the location of the rx ring tail. More punctuation cleanup. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet Remove unused variableLinas Vepstas
Remove unused variable; this makes code easier to read. Tweak commentary. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet RX RefillLinas Vepstas
The invocation of the rx ring refill routine is haphazard, it can be called from a central location. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet Cleanup return codesLinas Vepstas
Simplify the somewhat convoluted use of return codes in the rx buffer handling. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet another skb mem leakLinas Vepstas
Another skb leak in an error branch. Fix this by adding call to dev_kfree_skb_irq() after moving to a more appropriate spot. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet RX skb mem leakLinas Vepstas
One of the unlikely error branches has an skb memory leak. Fix this by handling the error conditions consistently. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet cleanup un-needed APILinas Vepstas
There is no need to pass a flag into spider_net_decode_one_descr() so remove this, and perform some othre minor cleanup. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet remove rxramfull taskletLinas Vepstas
Get rid of the rxramfull tasklet, and let the NAPI poll routine deal with this situation. (The rxramfull interrupt is simply stating that the h/w has run out of room for incoming packets). Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet add net_ratelimit to suppress long outputLinas Vepstas
This patch adds net_ratelimit to many of the printks in order to limit extraneous warning messages (created in response to Bug 28554). This patch supercedes all previous ratelimit patches. This has been tested, please apply. From: James K Lewis <jklewis@us.ibm.com> Signed-off-by: James K Lewis <jklewis@us.ibm.com> Signed-off-by: Linas Vepstas <jlinas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet DMA coalescingLinas Vepstas
The current driver code performs 512 DMA mappings of a bunch of 32-byte ring descriptor structures. This is silly, as they are all in contiguous memory. This patch changes the code to dma_map_coherent() each rx/tx ring as a whole. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05chelsio: tabulate the update of the statistic countersFrancois Romieu
Let's try to avoid some code duplication. - cxgb2 The data are contiguous. Use plain memcpy. - ixf1010/pm3393/vsc7326 The cast of &mac->stats to (u64 *) is not wonderful but it is not clear if it is worth to add an ad-hoc union under the struct cmac_statistics. vsc7326_reg.h suggests that more statistics could be available. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-02-05chelsio: misc cleanups in sgeFrancois Romieu
- duplicated code in sge::free_cmdQ_buffers ; - NET_IP_ALIGN is already defined in (included) <linux/skbuff.h> ; - pci_alloc_consistent() returns void * ; - pci_alloc_consistent() returns a zeroed chunk of memory ; - early return in restart_tx_queues. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-02-05chelsio: useless test in cxgb2::remove_oneFrancois Romieu
pci_get_drvadata() is necessarily distinct from NULL if cxgb2::init_one succeeded. cxgb2::remove_one is solely issued through the PCI device callback. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-02-05chelsio: useless curly bracesFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-02-05chelsio: spaces, tabs and friendsFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-02-05chelsio: the return statement is not a functionFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-02-05chelsio: move return, break and continue statements on their own lineFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-02-05[PATCH] ipw2200: add iwconfig rts/frag auto supportZhu Yi
This patch add ipw2200 support for iwconfig rts/frag auto. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: Add ID for ZyXEL ZyAIR G-220 v2Daniel Drake
Tested by Marijn Schouten zd1211b chip 0586:340f v4810 high 00-13-49 AL2230_RF pa0 g--- FCC ID: I88G220V2 Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] softmac: avoid assert in ieee80211softmac_wx_get_rateJohn W. Linville
Unconfigured bcm43xx device can hit an assert() during wx_get_rate queries. This is because bcm43xx calls ieee80211softmac_start late (i.e. during open instead of probe). bcm43xx_net_open -> bcm43xx_init_board -> bcm43xx_select_wireless_core -> ieee80211softmac_start Fix is to check that device is running before completing ieee80211softmac_wx_get_rate. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] prism54: add ethtool -i interfaceKai Engert
Add support for "ethtool -i" to prism54 driver. ethtool -i queries the specified device for associated driver information. This helps tools like Fedora's system-config-network to provide GUI management of network devices. I learned how to write this patch by reading the ipw2100 driver code. Signed-off-by: Kai Engert <kengert@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] bcm43xx: Interrogate hardware-enable switch and update LEDsLarry Finger
The current bcm43xx driver ignores any wireless-enable switches on mini-PCI and mini-PCI-E cards. This patch implements a new routine to interrogate the radio hardware enabled bit in the interface, logs the initial state and any changes in the switch (if debugging enabled), activates the LED to show the state, and changes the periodic work handler to provide 1 second response to switch changes and to account for changes in the periodic work specs. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: Add ID for Linksys WUSBF54GDaniel Drake
Tested by Henrik Hjelte zd1211b chip 13b1:0024 v4802 high 00-14-bf AL2230_RF pa0 ---- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] Update Prism54 MAINTAINERS entryMichael Buesch
prism54-private@prism54.org bounces with SMTP error from remote mailer after RCPT TO:<prism54-private@prism54.org>: host mx1.tuxfamily.net [212.85.158.8]: 550 unknown user developers@islsm.org seems to be the new mailing list. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: Remove addressing abstractionDaniel Drake
Instead of passing our own custom 32-bit addresses around and translating them, this patch makes all our register address constants absolute and removes the translation. There are two ugly parts: - fw_reg_addr() is needed to compute addresses of firmware registers, as this is dynamic based upon firmware - inc_addr() needs a small hack to handle byte vs word addressing However, both of those are only small, and we don't use fw_regs a whole lot anyway. The bonuses here include simplicity and improved driver readability. Also, the fact that registers are now referenced by 16-bit absolute addresses (as opposed to 32-bit pseudo addresses) means that over 2kb compiled code size has been shaved off. Includes some touchups and sparse fixes from Ulrich Kunitz. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: Consistency for address space constantsDaniel Drake
The zd1211rw address space has confused me once too many times. This patch introduces the following naming notation: Memory space is split into segments (cr, fw, eeprom) and segments may contain components (e.g. boot code inside eeprom). These names are arbitrary and only for the description below: x_START: Absolute address of segment start (previously these were named such as CR_BASE_OFFSET, but they weren't really offsets unless you were considering them as an offset to 0) x_LEN: Segment length x_y_LEN: Length of component y of segment x x_y_OFFSET: Relative address of component y into segment x. The absolute address for this component is (x_START + x_y_OFFSET) I also renamed EEPROM registers to EEPROM data. These 'registers' can't be written to using standard I/O and really represent predefined data from the vendor. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: 2 new ZD1211B device ID'sDaniel Drake
Philips SNU5600, tested by unibrow zd1211b chip 0471:1236 v4810 high 00-12-bf AL2230_RF pa0 g-- SMC Ez Connect 802.11g (SMCWUSB-G), tested by Victorino Sanz Prat zd1211b chip 083a:4505 v4810 full 00-13-f7 AL2230_RF pa0 g--N Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: Generic HMAC initializationDaniel Drake
Many of the registers written during ZD1211 HMAC initialization are duplicated exactly for ZD1211B. Move the identical ones into a generic part, and write the hardware-specific ones separately. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05e1000: update version to 7.3.20-k2Auke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2007-02-05e1000: tune our dynamic itr transmit packet accountingJesse Brandeburg
The driver was still mis-calculating the number of bytes sent during transmit, now the driver computes what appears to be exactly 100% correct byte counts (not including CRC) when figuring out how many bytes and frames were sent during the current transmit packet.
2007-02-05e1000: clear ip csum info from context descriptorBruce Allan
Since the driver sets the IP checksum insertion bit (IXSM in Status field) in transmit context descriptors, it should clear the IP checksum bits of any garbage so as not to confuse the hardware. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2007-02-05e1000: display flow control of link status at link upAuke Kok
Print RX/TX flow control setting at link up time to display the actual link FC properties instead of the advertised values. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2007-02-05e1000: fix NAPI performance on 4-port adaptersJesse Brandeburg
This fix attempts to solve a customer (IBM) reported issue with NAPI enabled e1000 having bad performance when transmitting simultaneously on four ports. The issue comes down to an interaction between NAPI, hardware interrupt balancing, and the driver rescheduling poll on the same processor. Try to fix by allowing the driver to re-enable interrupts sooner instead of polling one more time, when there was recently all the work completed in cleanup. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2007-02-05e1000: Fix MSI only interrupt handler routineJesse Brandeburg
Unfortunately the read-free MSI interrupt handler needs to flush write the icr register and thus we can't be read-free. Our MSI irq routine thus becomes a lot more simpler since we don't need to track link state anymore. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2007-02-05e1000: clean up debug output definesAuke Kok
Remove unused MSGOUT macro and add "\n" to function debug output. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2007-02-05e1000: simplify case handling gigabit at half duplexJesse Brandeburg
Remvoe duplicate code handling erraneous user supplied wrong case of gigabit speed with half duplex. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2007-02-04Linux 2.6.20Linus Torvalds
2007-02-04[PATCH] EFI x86: pass firmware call parameters on the stackFrédéric Riss
When calling into the EFI firmware, the parameters need to be passed on the stack. The recent change to use -mregparm=3 breaks x86 EFI support. This patch is needed to allow the new Intel-based Macs to suspend to ram (efi.get_time is called during the suspend phase). Signed-off-by: Frederic Riss <frederic.riss@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-03[PATCH] fix rtl8150Al Viro
That code doesn't do what its author apparently thought it would do... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-03Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] sd: udev accessing an uninitialized scsi_disk field results in a crash [SCSI] st: A MTIOCTOP/MTWEOF within the early warning will cause the file number to be incorrect [SCSI] qla4xxx: bug fixes [SCSI] Fix scsi_add_device() for async scanning
2007-02-03[PATCH] x86-64: define dma noncoherent API functionsJeff Garzik
x86-64 is missing these: Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-03[PATCH] Altix: more ACPI PRT supportJohn Keller
The SN Altix platform does not conform to the IOSAPIC IRQ routing model. Add code in acpi_unregister_gsi() to check if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) and return. Due to an oversight, this code was not added previously when similar code was added to acpi_register_gsi(). http://marc.theaimsgroup.com/?l=linux-acpi&m=116680983430121&w=2 Signed-off-by: John Keller <jpk@sgi.com> Acked-by: Len Brown <lenb@kernel.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-03[PATCH] revert blockdev direct io back to 2.6.19 versionAndrew Morton
Andrew Vasquez is reporting as-iosched oopses and a 65% throughput slowdown due to the recent special-casing of direct-io against blockdevs. We don't know why either of these things are occurring. The patch minimally reverts us back to the 2.6.19 code for a 2.6.20 release. Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: Ken Chen <kenchen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-03[PATCH] alpha: fix epoll syscall enumerationsMike Frysinger
We went and named them __NR_sys_foo instead of __NR_foo. It may be too late to change this, but we can at least add the proper names now. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-03[PATCH] net/smc911x: match up spin lock/unlockPeter Korsgaard
smc911x_phy_configure's error handling unconditionally unlocks the spinlock even if it wasn't locked. Patch fixes it. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: Jeff Garzik <jeff@garzik.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-03[PATCH] kexec: Avoid migration of already disabled irqs (ia64)Magnus Damm
This patch fixes up ia64 kexec support for HP rx2620 hardware. It does this by skipping migration of already disabled irqs. This is most likely a problem on other ia64 platforms as well, but I've only been able to reproduce it on one machine so far. The full story is that handle_bad_irq() gets invoked before starting the new kernel without this patch. This seems to happen when fixup_irqs() calls generic_handle_irq() on already migrated (and disabled) irqs. So by avoiding migration of disabled irqs we stay away of handle_bad_irq(). The code has been tested on three different ia64 machines, all with good results. It is possible to trigger the same bug by offlining a processor using echo 0 > /sys/devices/system/cpu/cpuX/online. More detailed information is available in the following mail thread: http://lists.osdl.org/pipermail/fastboot/2007-January/thread.html#5774 Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Zou, Nanhai <nanhai.zou@intel.com> Acked-by: Jay Lan <jlan@sgi.com> Acked-by: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>