aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-01-31[PATCH] USBATM: use dev_kfree_skb_any rather than dev_kfree_skbDuncan Sands
In one spot (usbatm_cancel_send) we were calling dev_kfree_skb with irqs disabled. This mistake is just too easy to make, so systematically use dev_kfree_skb_any rather than dev_kfree_skb. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: return correct error code when out of memoryDuncan Sands
We weren't always returning -ENOMEM. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: shutdown open connections when disconnectedDuncan Sands
This patch causes vcc_release_async to be applied to any open vcc's when the modem is disconnected. This signals a socket shutdown, letting the socket user know that the game is up. I wrote this patch because of reports that pppd would keep connections open forever when the modem is disconnected. This patch does not fix that problem, but it's a step in the right direction. It doesn't help because the pppoatm module doesn't yet monitor state changes on the ATM socket, so simply never realises that the ATM connection has gone down (meaning it doesn't tell the ppp layer). But at least there is a socket state change now. Unfortunately this patch may create problems for those rare users like me who use routed IP or some other non-ppp connection method that goes via the ATM ARP daemon: the daemon is buggy, and with this patch will crash when the modem is disconnected. Users with a buggy atmarpd can simply restart it after disconnecting the modem. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: xusbatm rewriteDuncan Sands
The xusbatm driver is for otherwise unsupported modems. All it does is grab hold of a user-specified set of interfaces - the generic usbatm core methods (hopefully) do the rest. As Aurelio Arroyo discovered when he tried to use xusbatm (big mistake!), the interface grabbing logic was completely borked. Here is a rewrite that works. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: kzalloc conversionDuncan Sands
Convert kmalloc + memset to kzalloc. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: remove .ownerDuncan Sands
Remove the unused .owner field in struct usbatm_driver. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: add flags fieldDuncan Sands
Have minidrivers and the core signal special requirements using a flags field in struct usbatm_data. For the moment this is only used to replace the need_heavy_init bind parameter, but there'll be new flags in later patches. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: trivial modificationsDuncan Sands
Formatting, changes to variable names, comments, log level changes, printk rate limiting. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: Add ET61X[12]51 Video4Linux2 driverLuca Risolia
This patch adds a Video4Linux2 driver giving support to ET61X151 and ET61X251 PC Camera Controllers made by Etoms Electronics. Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: SN9C10x driver updatesLuca Risolia
SN9C10x driver updates: - Use kzalloc() instead of kmalloc() - Move some macro definitions from sn9c102.h to sn9c102_core.c - Use vfree() and vmalloc_32() instead of rvfree() and rvmalloc() - Fix mmap() sys call - Documentation updates Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: cp2101 Add new device IDsCraig Shelley
The attached patch adds four new device IDs for the CP2101 driver. Also 3 tab characters have been removed from device ID table. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: add new pl2303 device idsDenis MONTERRAT
Signed-off-by: FALIPOU F Developer <fred.falipou@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: pl2303: Added support for CA-42 clone cableMartin Gingras
Added support for CA-42 clone cable (www.ca-42.com) Signed-off-by: Martin Gingras <martin.gingras@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: touchkitusb.c (eGalax driver) fixJuergen Schindele
This patch corrects the URB initialisation for transfers like this is done in other drivers too. Without this patch no data was transmitted on a PXA270 OHCI platform. May apply to others too. Signed-off-by: Juergen Schindele <schindele@nentec.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: asix - Add device IDs for 0G0 Cable EthernetDavid Hollis
Add device IDs for the 0G0 Cable Ethernet device as reported by Charles Lepple <clepple@gmail.com>. Signed-off-by: David Hollis <dhollis@davehollis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: SN9C10x driver updates and bugfixesLuca Risolia
SN9C10x driver updates and bugfixes. Changes: + new, - removed, * cleanup, @ bugfix: @ fix poll() @ Remove bad get_ctrl()'s * Reduce ioctl stack usage * Remove final ";" from some macro definitions * Better support for SN9C103 + Add sn9c102_write_regs() + Add 0x0c45/0x602d to the list of SN9C10x based devices + Add support for OV7630 image sensors + Provide support for the built-in microphone interface of the SN9C103 + Documentation updates + Add 0x0c45/0x602e to the list of SN9C10x based devices Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: usb-storage support for SONY DSC-T5 still cameraAlexandre Duret-Lutz
I've been offered a nice Sony DSC-T5 digital camera, with a USB connection. Unfortunately it is not recognized by Linux 2.6.14.4's usb-storage. With the following change I'm able to mount and read my pictures: Signed-off-by: Phil Dibowitz <phil@ipom.com>
2006-01-31[PATCH] USB: fix oops in acm disconnectOliver Neukum
this fixes an oops with disconnection in acm. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: cleanup of usblpOliver Neukum
this fixes -potential hang by disconnecting through usbfs -kzalloc -general cleanup -micro optimisation in interrupt handlers It compiles and I am printing. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: usb-storage: Add support for Rio KarmaMatthew Dharm
This patch from Bob Copeland adds support for the Rio Karma portable digital audio player to the usb-storage driver. The only thing needed to support this device is a one-time (per plugin) init command which is sent to the device. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] drivers/usb/input/yealink.c: Cleanup device matching codeHenk
This should fix things mentioned below: "I was curious why my firewall was loading a 'phone driver'. It turns out that the probing in the yealink driver is a little too assuming.. static struct usb_device_id usb_table [] = { { USB_INTERFACE_INFO(USB_CLASS_HID, 0, 0) }, { } }; So it picked up my UPS, and loaded the driver. Whilst no harm came, because it later checks the vendor/product IDs, this driver should probably be rewritten to only probe for the device IDs it actually knows about. Dave" Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: ftdi: Two new ATIK based USB astronomical CCD camerasRui Santos
Documentation: Specify grayscale specification on ATIK-ATK16 and ATIK-ATK16HR comments. New: Add ProductID and VendorID for devices ATIK-ATK16C and ATIK-ATK16HRC. These devices are also USB Astronomical CCD cameras that work through an FTDI 245BM chip, share the same base hardware but, it has a colour CCD chip instead of a grayscale one. Signed-off-by: Rui Santos <rsantos@grupopie.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: ftdi_sio: new PID for PCDJ DAC2Wouter Paesen
The attached patch adds a new PID for the ftdi_sio driver. It will enable support for PC-DJ's DAC-2 controller module (more information on http://www.pcdjhardware.com/DAC2.asp) Signed-off-by: Wouter Paesen <wouter@kangaroot.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: ftdi_sio: new IDs for Westrex devicesIan Abbott
This patch adds two new devices to the ftdi_sio driver's device ID table. The device IDs were supplied by Cory Lee to support two POS printers made by Westrex International (Model 777 and Model 8900F). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: new id for ftdi_sio.c and ftdi_sio.hLouis Nyffenegger
this patch includes the Vendor Id for a optic fiber to USB device named TTUSB from thought Technology. It's just add the vendor Id to ftdi_sio.h and add the Vendor ID and model Id to table_combined. Signed-off-by: Louis Nyffenegger <louis.nyffenegger@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: ub 05 Bulk resetPete Zaitcev
For crying out loud, they have devices which do not like port resets. So, do what usb-storage does and try both bulk and port resets. We start with a port reset (which usb-storage does at the end of transport), then do a Bulk reset, then a port reset again. This seems to work for me. The code is getting dirtier and dirtier here, but I swear that I'll do something about it (see those two new XXX). Honest. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: ub 04 Loss of timer and a hangPete Zaitcev
If SCSI commands are submitted while other commands are still processed, the dispatch loop turns, and we stop the work_timer. Then, if URB fails to complete, ub hangs until the device is unplugged. This does not happen often, becase we only allow one SCSI command per block device, but does happen (on multi-LUN devices, for example). The fix is to stop timer only when we actually going to change the state. The nicest code would be to have the timer stopped in URB callback, but this is impossible, because it can be called from inside a timer, through the urb_unlink. Then we get BUG in timer.c:cascade(). So, we do it a little dirtier. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: ub 03 Oops with CFQPete Zaitcev
The blk_cleanup_queue does not necesserily destroy the queue. When we destroy the corresponding ub_dev, it may leave the queue spinlock pointer dangling. This patch moves spinlocks from ub_dev to static memory. The locking scheme is not changed. These spinlocks are still separate from the ub_lock. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: fix ehci early handoff issues warningAndrew Morton
Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: fix EHCI early handoff issuesDavid Brownell
This moves the previously widely-used ehci-pci.c BIOS handoff code into the pci-quirks.c file, replacing the less widely used "early handoff" version that seems to cause problems lately. One notable change: the "early handoff" version always enabled an SMI IRQ ... and did so even if the pre-Linux code said it was not using EHCI (and not expecting EHCI SMIs). Looks like a goof in a workaround for some unknown BIOS version. This merged version only forcibly enables those IRQs when pre-Linux code says it's using EHCI. And now it always forces them off "just in case". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] "Fix uidhash_lock <-> RXU deadlock" fixAndrew Morton
I get storms of warnings from local_bh_enable(). Better-tested patches, please. Cc: Ingo Molnar <mingo@elte.hu> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-31Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/x86Linus Torvalds
2006-01-31Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgartLinus Torvalds
2006-01-31Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
2006-01-31Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
2006-01-31Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
2006-01-31Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
2006-01-31Fix ipv4/igmp.c compile with gcc-4 and IP_MULTICASTLinus Torvalds
Modern versions of gcc do not like case statements at the end of a block statement: you need at least an empty statement. Using just a "break;" is preferred for visual style. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-31[SCSI] ServeRAID: prevent seeing DADSI devicesJack Hammer
A critical thing the ServeRAID driver MUST do is hide the physical DASDI devices from the OS. It does this by intercepting the INQUIRY commands. In recent 2.6.15 testing, I discovered this to be failing. The cause was the driver assuming that the INQUIRY response data was in a simple single buffer, when it was actually a 1 element scatter gather list. This patch makes ips always look at the correct data when examining an INQUIRY response. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: add message sanity checkMoore, Eric
This adds a sanity check in the interrupt routine insures incoming message frames are a valid message frames. The code for setting 0xdeadbeaf in the freed message frames, apparently was already submitted by Christoph in previous patch submission. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: unloading the driver - only set asyn narrow for configured ↵Moore, Eric
devices This patch inhibits sending spi negotiation parameters for non-configured devices from the slave_destroy function. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: unloading the driver results in panic - fixMoore, Eric
The ioc->alt_ioc->alt_ioc pointer is not getting cleared during driver unload time. This dangling pointer can result in panic in certain circumstances, such as error recovery, or firmware download in flashless environments. This only impacts dual functions controllers, such as 1030. Please apply. This patch also includes a small cosmetic name change for mpt_spi_log_info. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] mptsas: don't complain on bogus slave_alloc callsChristoph Hellwig
When people use the userspace scanning facilities on SAS hardware the LLDD gets bogus slave_alloc calls. Just fail those gracefully instead of printing a warning in mptsas and another one in the midlayer. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: add task managment response code infoMoore, Eric
Adding verbose message returned from firmware when a task mangment request fails. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: add MSI supportChristoph Hellwig
On Mon, Jan 16, 2006 at 06:53:24PM -0700, Moore, Eric wrote: > Adding MSI support, and command line for enabling > it. By default, the command line option has MSI disabled. mpt_msi_enable is initialized to 0 implicitly, no need to do that. Also replace if (mpt_msi_enable == 1) tests with just if (mpt_msi_enable). Updated patch below: Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: overrun tape fixMoore, Eric
Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: add verbose messages for RAID actionsMoore, Eric
A customer request to send raid asyn actions from firmware to the event syslog. This shows when raid volumes go degraded, or complete resync, or volumes created/deleted, etc. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: increase reply frame size from 0x40 to 0x50 bytesMoore, Eric
Increasing the reply frame size by 16 bytes, to be in sync with the other fusion drivers. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: setting timeouts in eh threads appropiatley for fc/sas/spiChristoph Hellwig
On Mon, Jan 16, 2006 at 06:53:13PM -0700, Moore, Eric wrote: > The task managment request timeout in the eh threads was set > for U320 timing, which is between 2-5 seconds. > This is too small for FC and SAS. > According to the firmware engineers, Fibre needs to be 40 seconds > and SAS needs to be 10 seconds. The timeout selection should probably be done in a little helper instead of duplicated in a few places. Updated patch below. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: mptsas, increase discovery timout to 300 secondsMoore, Eric
Increase the port enable timeout only for SAS from 30 to 300 seconds. A customer request for the handling large topologies. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 00:04:36 +0000