aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-04-27USB: kill BKL in usblcdOliver Neukum
this patch removes usage of BKL from usblcd, which got it from the old skeleton driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: kill BKL in skeleton driverOliver Neukum
Iet's kill BKL where we can. This is relative to the last patch to the skeleton driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix skeleton driverOliver Neukum
compilation of the skeleton driver is currently broken. It doesn't compile. So while I am it: - fix typo - add comments to answer common questions - actually allow autosuspend in the driver struct - increase paralellism by restricting code under locks Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: pxa2xx_udc: fix hardcoded irq numberMilan Svoboda
This patch changes last use of hardcoded number of irq to use platfrom_get_irq. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27pxa2xx_udc: cleanups, use platform_get_irqDavid Brownell
Make the pxa2xx_udc driver fetch its IRQ from platform resources rather than using compile-time constants, so that it works properly on IXP4xx systems not just PXA21x/25x/26x. Other updates: - Do that using platform_get_irq() - Switch to platform_driver_probe() - Handle device_add() errors - Remove "function" sysfs attribute and its potential errors - Whitespace cleanups Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Adding PID of SHARP S01SH for ipaq.cNorihiko Tomiyama
I write a patch adding support "SHARP EMONE(S01SH)" device for ipaq.c. EMONE is a PDA with built-in HSDPA function. From: Norihiko Tomiyama <norihiko.tomiyama@ctc-g.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (46 commits) dev_dbg: check dev_dbg() arguments drivers/base/attribute_container.c: use mutex instead of binary semaphore mod_sysfs_setup() doesn't return errno when kobject_add_dir() failure occurs s2ram: add arch irq disable/enable hooks define platform wakeup hook, use in pci_enable_wake() security: prevent permission checking of file removal via sysfs_remove_group() device_schedule_callback() needs a module reference s390: cio: Delay uevents for subchannels sysfs: bin.c printk fix Driver core: use mutex instead of semaphore in DMA pool handler driver core: bus_add_driver should return an error if no bus debugfs: Add debugfs_create_u64() the overdue removal of the mount/umount uevents kobject: Comment and warning fixes to kobject.c Driver core: warn when userspace writes to the uevent file in a non-supported way Driver core: make uevent-environment available in uevent-file kobject core: remove rwsem from struct subsystem qeth: Remove usage of subsys.rwsem PHY: remove rwsem use from phy core IEEE1394: remove rwsem use from ieee1394 core ...
2007-04-27dev_dbg: check dev_dbg() argumentsDan Williams
Duplicate what Zach Brown did for pr_debug in commit 8b2a1fd1b394c60eaa2587716102dd5e9b4e5990 [akpm@linux-foundation.org: fix a couple of things which broke] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27drivers/base/attribute_container.c: use mutex instead of binary semaphoreMatthias Kaehlcke
use mutex instead of binary semaphore in drivers/base/attribute_container.c Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27mod_sysfs_setup() doesn't return errno when kobject_add_dir() failure occursAkinobu Mita
mod_sysfs_setup() doesn't return an errno when kobject_add_dir() for module "holders" directory fails. So caller of mod_sysfs_setup() will keep going and get oops. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27s2ram: add arch irq disable/enable hooksJohannes Berg
After some more discussion this patch replaces it: From: Johannes Berg <johannes@sipsolutions.net> Subject: suspend: add arch irq disable/enable hooks For powermac, we need to do some things between suspending devices and device_power_off, for example setting the decrementer. This patch allows architectures to define arch_s2ram_{en,dis}able_irqs in their asm/suspend.h to have control over this step. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27define platform wakeup hook, use in pci_enable_wake()David Brownell
This defines a platform hook to enable/disable a device as a wakeup event source. It's initially for use with ACPI, but more generally it could be used whenever enable_irq_wake()/disable_irq_wake() don't suffice. The hook is called -- if available -- inside pci_enable_wake(); and the semantics of that call are enhanced so that support for PCI PME# is no longer needed. It can now work for devices with "legacy PCI PM", when platform support allows it. (That support would use some board-specific signal for for the same purpose as PME#.) [akpm@linux-foundation.org: Make it compile with CONFIG_PM=n] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27security: prevent permission checking of file removal via sysfs_remove_group()James Morris
Prevent permission checking from being performed when the kernel wants to unconditionally remove a sysfs group, by introducing an kernel-only variant of lookup_one_len(), lookup_one_len_kern(). Additionally, as sysfs_remove_group() does not check the return value of the lookup before using it, a BUG_ON has been added to pinpoint the cause of any problems potentially caused by this (and as a form of annotation). Signed-off-by: James Morris <jmorris@namei.org> Cc: Nagendra Singh Tomar <nagendra_tomar@adaptec.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27device_schedule_callback() needs a module referenceAlan Stern
This patch (as896b) fixes an oversight in the design of device_schedule_callback(). It is necessary to acquire a reference to the module owning the callback routine, to prevent the module from being unloaded before the callback can run. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Satyam Sharma <satyam.sharma@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27s390: cio: Delay uevents for subchannelsCornelia Huck
We often have the situation that we register a subchannel and start device recognition, only to find out that the device is not usable after all, which triggers an unregister of the subchannel. This often happens on hundreds of subchannels on a LPAR, leading to a storm of events which aren't of any use. Therefore, use uevent_suppress to delay the KOBJ_ADD uevent for a subchannel until we know that its ccw_device is to be registered. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Eric Rannaud <eric.rannaud@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27sysfs: bin.c printk fixAndrew Morton
fs/sysfs/bin.c: In function 'read': fs/sysfs/bin.c:77: warning: format '%zd' expects type 'signed size_t', but argument 4 has type 'int' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Driver core: use mutex instead of semaphore in DMA pool handlerMatthias Kaehlcke
the DMA pool handler uses a semaphore as mutex. use the mutex API instead of the (binary) semaphore Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27driver core: bus_add_driver should return an error if no busGreg Kroah-Hartman
As pointed out by Dave Jones. Cc: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27debugfs: Add debugfs_create_u64()Michael Ellerman
I went to use this the other day, only to find it didn't exist. It's a straight copy of the debugfs u32 code, then s/u32/u64/. A quick test shows it seems to be working. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27the overdue removal of the mount/umount ueventsAdrian Bunk
This patch contains the overdue removal of the mount/umount uevents. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27kobject: Comment and warning fixes to kobject.cEric W. Biederman
This dots some i's and crosses some t's after left over from when kobject_kset_add_dir was built from kobject_add_dir. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Driver core: warn when userspace writes to the uevent file in a ↵Kay Sievers
non-supported way In the future we will allow the uevent type to be written to the uevent file to trigger the different types of uevents. But for now, as we only support the ADD event, warn if userspace tries to write anything else to this file. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Driver core: make uevent-environment available in uevent-fileKay Sievers
This allows sysfs to show the environment variables that are available if the uevent happens. This lets userspace not have to cache all of this information as the kernel already knows it. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27kobject core: remove rwsem from struct subsystemGreg Kroah-Hartman
It isn't used at all by the driver core anymore, and the few usages of it within the kernel have now all been fixed as most of them were using it incorrectly. So remove it. Now the whole struct subsys can be removed from the system, but that's for a later patch... Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27qeth: Remove usage of subsys.rwsemCornelia Huck
the current driver tree contains the removal of subsys.rwsem. Unfortunately, this breaks qeth. However, it should be no problem to fix the walking of the devices for /proc/qeth: No need to take subsys.rwsem during walking the devices, driver_find_devices() should already suffice. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27PHY: remove rwsem use from phy coreGreg Kroah-Hartman
The subsystem rwsem is not used by the driver core at all, so the use of it in the phy code doesn't make any sense. They might possibly want to use a local lock, but I am unsure about that. Cc: netdev <netdev@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27IEEE1394: remove rwsem use from ieee1394 coreGreg Kroah-Hartman
The subsystem rwsem is not used by the driver core at all, so the use of it in the ieee1394 code doesn't make any sense. They might possibly want to use a local lock, but as most of these operations are already protected by a local lock, it really doesn't look like it would be needed. Cc: Ben Collins <bcollins@debian.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: linux1394-devel <linux1394-devel@lists.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27IDE: remove rwsem use from ide-proc coreGreg Kroah-Hartman
The subsystem rwsem is not used by the driver core at all, so the use of it in the ide-proc code of it doesn't make any sense. Perhaps a local lock might be needed, but I do not really think so. Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: linux ide <linux-ide@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Input: gameport - do not touch bus's rwsemDmitry Torokhov
The subsystem rwsem is not used by the driver core at all, so there is no point in trying to access it. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Input: serio - do not touch bus's rwsemDmitry Torokhov
The subsystem rwsem is not used by the driver core at all, so there is no point in trying to access it. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27PNP: stop using the subsystem rwsemGreg Kroah-Hartman
The rwsem is not used to protect anything, so the use of it by the PNP subsystem isn't really useful, and it's doubtful if it really did anything or not. So I've removed it. Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: remove use of the bus rwsem, as it doesn't really protect anything.Greg Kroah-Hartman
The driver core stopped using the rwsem a long time ago, yet the USB core still grabbed the lock, thinking it protected something. This patch removes that useless use. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.de> Cc: David Brownell <david-b@pacbell.net> Cc: linux-usb-devel <linux-usb-devel@lists.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27SCSI: use the proper semaphore to protect the class listsGreg Kroah-Hartman
SCSI was using the incorrect lock to protect walking the list of all devices in the class. This patch fixes this. Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Driver core: remove use of rwsemGreg Kroah-Hartman
This lock is never used by the rest of the driver core, so the fact that we are grabbing it here means it isn't correct... Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27kobject: kobject_add() reference leakCornelia Huck
We leak a reference if we attempt to add a kobject with no name. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Kobject: kobject_uevent.c: Collapse unnecessary loop nesting (top_kobj)John Anthony Kazos Jr
Collapses a do..while() loop within an if() to a simple while() loop for simplicity and readability. Signed-off-by: John Anthony Kazos Jr. <jakj@j-a-k-j.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Driver core: add suspend() and resume() to struct device_typeDmitry Torokhov
Driver core: add suspend() and resume() to struct device_type In cases when there are devices of different types in the same class we can't use class's implementation of suspend and resume methods and we need to add them to struct device_type instead. Also fix error handling in resume code (we should not try to call class's resume method iof bus's resume method for the device failed. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27uevent: use add_uevent_var() instead of open coding itEric Rannaud
Make use of add_uevent_var() instead of (often incorrectly) open coding it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Eric Rannaud <eric.rannaud@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Driver core: switch firmware_class to uevent_suppress.Cornelia Huck
Use uevent_suppress instead of returning an error code in firmware_uevent(). Get rid of the now unneeded FW_STATUS_READY and FW_STATUS_READY_NOHOTPLUG. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Driver core: suppress uevents via filterCornelia Huck
Suppress uevents for devices if uevent_suppress is set via dev_uevent_filter(). This makes the driver core suppress all device uevents, not just the add event in device_add(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Driver core: notify userspace of network device renamesJean Tourrilhes
Provide rename event for when we rename network devices. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27kref: fix CPU ordering with respect to krefsOliver Neukum
some atomic operations are only atomic, not ordered. Thus a CPU is allowed to reorder memory references to an object to before the reference is obtained. This fixes it. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Driver core: remove unneeded completion from driver release pathGreg Kroah-Hartman
The completion in the driver release path is due to ancient history in the _very_ early 2.5 days when we were not tracking the module reference count of attributes. It is not needed at all and can be removed. Note, we now have an empty release function for the driver structure. This is due to the fact that drivers are statically allocated in the system at this point in time, something which I want to change in the future. But remember, drivers are really code, which is reference counted by the module, unlike devices, which are data and _must_ be reference counted properly in order to work correctly. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27driver core: don't fail attaching the device if it cannot be boundCornelia Huck
Don't fail bus_attach_device() if the device cannot be bound. If dev->driver has been specified, reset it to NULL if device_bind_driver() failed and add the device as an unbound device. As a result, bus_attach_device() now cannot fail, and we can remove some checking from device_add(). Also remove an unneeded check in bus_rescan_devices_helper(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27powerpc: make it compile for multithread changeAndrew Morton
arch/powerpc/kernel/of_platform.c:479: error: unknown field `multithread_probe' specified in initializer Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27driver core: per-subsystem multithreaded probingCornelia Huck
Make multithreaded probing work per subsystem instead of per driver. It doesn't make much sense to probe the same device for multiple drivers in parallel (after all, only one driver can bind to the device). Instead, create a probing thread for each device that probes the drivers one after another. Also make the decision to use multi-threaded probe per bus instead of per device and adapt the pci code. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27kobject: kobject_shadow_add cleanupDmitriy Monakhov
- correct function name in comments - parrent assignment does metter only inside "if" block, so move it inside this block. Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Driver core: add name to device_typeKay Sievers
If "name" of a device_type is specified, the uevent will contain the device_type name in the DEVTYPE variable. This helps userspace to distingiush between different types of devices, belonging to the same subsystem. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27driver core: Use attribute groups in struct device_typeDmitry Torokhov
Driver core: use attribute groups in struct device_type Attribute groups are more flexible than attribute lists (an attribute list can be represented by anonymous group) so switch struct device_type to use them. Also rework attribute creation for devices so that they all cleaned up properly in case of errors. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Cc: Kay Sievers <kay.sievers@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Driver core: udev triggered device-<>driver bindingKay Sievers
We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>