aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-02-10ixgbe: Removing the unused PAGE_USE_COUNT() macro.Breno Leitão
Removing the unused PAGE_USE_COUNT() macro. Also removing the unused pages variable at ixgbe_configure_rx() function. Signed-off-by: Breno Leitão <leitao@linux.vnet.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-10e1000e: Serdes - attempt autoneg when link restored.dave graham
This patch addresses an issue where we did not restart auto-negotiation on serdes links when the link partner was disabled and re-enabled. It includes reworking the serdes link detect mechanism to be a state machine for 82571 and 82572 parts only. Signed-off-by: dave graham <david.graham@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-10e1000e: remove RXSEQ link monitoring for serdesdave graham
RXSEQ interrupts were used to force link state interrogation of serdes links, as the Si was not guaranteed to report LSC interrupts when the link changed state. On some bladeservers this resulted in false link up reports if no link partner was connected. The RXSEQ treatment is not necessary, as the link can be monitored from the watchdog timer, and the false link indications cease. Signed-off-by: dave graham <david.graham@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-10e1000e: Disable dynamic clock gating for 82571 per si errata.dave graham
82571 and 82572 Errata #13 documents that the Si feature DMA Dynamic Clock Gating should be disabled, and identifies the workaround of disabling the feature by EEPROM setting. EEPROM versions that do not include the recommended workaround have been found in the field, and so some customers remain at risk. Because the feature DMA Dynamic clock Gating can be disabled by directly setting the appropriate bit in the E1000_CTRL_EXT register, this patch overrides the EEPROM setting, and force-disables the feature. Signed-off-by: dave graham <david.graham@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-10e1000e: add aer supportJesse Brandeburg
most if not all of the devices supported by e1000e support AER (Advanced Error Reporting) so we attempt to register with the OS that we know how to reset ourselves after a fatal error. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-10net: Move skbuff symbol exports after each symbol's definition.David S. Miller
net/core/skbuff.c is a hodge-podge of symbol export placement. Some of the exports are right after the definition of the symbol being exported, others are clumped together into a big group at the end of the file. Make things consistent. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-10irda: Use __netdev_alloc_skb() instead of __dev_alloc_skb().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-10netdev: Use __netdev_alloc_skb() instead of __dev_alloc_skb().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-10pkt_sched: sch_multiq: Change errno on non-multiqueue devices use.Jarek Poplawski
Current "RTNETLINK answers: Invalid argument" warning, while trying to add multiq qdisc to non-multiqueue device, isn't very helpful and some of these devs can be changed btw., so let's use a better errno. With feedback from Stephen Hemminger <shemminger@vyatta.com> Reported-by: Badalian Vyacheslav <slavon@bigtelecom.ru> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09net: Kill skbuff macros from the stone ages.David S. Miller
This kills of HAVE_ALLOC_SKB and HAVE_ALIGNABLE_SKB. Nothing in-tree uses them and nothing in-tree has used them since 2.0.x times. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-02-09enic: Add api for link down count and to get firmware notification status.Scott Feldman
Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09enic: bug fix: tx_timeout reset path fix-upsScott Feldman
tx_timeout reset path needs to re-init dev and re-apply nic cfg to enable vlan stripping. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09enic: record all bad FCS errs as frame errorsScott Feldman
Report all bad FCS errs as frames errs. This includes frames with bad FCS on wire detected by MAC and frames which may be truncated due to ingress FIFO overruns. No longer print a driver msg on bad FCS err. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09enic: bug fix: return notify intr creditsScott Feldman
Return notify intr credits after notify intr from firmware. This is especially important for legacy PCI intr mode, where not returning credits would cause PBA to remain asserted which would get us right back into the ISR. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/gianfar.c
2009-02-09ppp: section fixes re netnsAlexey Dobriyan
PPP is modular code so no initdata on netns hooks. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09bridge: Fix LRO crash with tunHerbert Xu
> Kernel BUG at drivers/net/tun.c:444 > invalid opcode: 0000 [1] SMP > last sysfs file: /class/net/lo/ifindex > CPU 0 > Modules linked in: tun ipt_MASQUERADE iptable_nat ip_nat xt_state ip_conntrack > nfnetlink ipt_REJECT xt_tcpudp iptable_filter d > Pid: 6912, comm: qemu-kvm Tainted: G 2.6.18-128.el5 #1 > RIP: 0010:[<ffffffff886f57b0>] [<ffffffff886f57b0>] > :tun:tun_chr_readv+0x2b1/0x3a6 > RSP: 0018:ffff8102202c5e48 EFLAGS: 00010246 > RAX: 0000000000000000 RBX: ffff8102202c5e98 RCX: 0000000004010000 > RDX: ffff810227063680 RSI: ffff8102202c5e9e RDI: ffff8102202c5e92 > RBP: 0000000000010ff6 R08: 0000000000000000 R09: 0000000000000001 > R10: ffff8102202c5e94 R11: 0000000000000202 R12: ffff8102275357c0 > R13: ffff81022755e500 R14: 0000000000000000 R15: ffff8102202c5ef8 > FS: 00002ae4398db980(0000) GS:ffffffff803ac000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 00002ae4ab514000 CR3: 0000000221344000 CR4: 00000000000026e0 > Process qemu-kvm (pid: 6912, threadinfo ffff8102202c4000, task > ffff81022e58d820) > Stack: 00000000498735cb ffff810229d1a3c0 0000000000000000 ffff81022e58d820 > ffffffff8008a461 ffff81022755e528 ffff81022755e528 ffffffff8009f925 > 000005ea05ea0000 ffff8102209d0000 00001051143e1600 ffffffff8003c00e > Call Trace: > [<ffffffff8008a461>] default_wake_function+0x0/0xe > [<ffffffff8009f925>] enqueue_hrtimer+0x55/0x70 > [<ffffffff8003c00e>] hrtimer_start+0xbc/0xce > [<ffffffff886f58bf>] :tun:tun_chr_read+0x1a/0x1f > [<ffffffff8000b3f3>] vfs_read+0xcb/0x171 > [<ffffffff800117d4>] sys_read+0x45/0x6e > [<ffffffff8005d116>] system_call+0x7e/0x83 > > > Code: 0f 0b 68 40 62 6f 88 c2 bc 01 f6 42 0a 08 74 0c 80 4c 24 41 > RIP [<ffffffff886f57b0>] :tun:tun_chr_readv+0x2b1/0x3a6 > RSP <ffff8102202c5e48> > <0>Kernel panic - not syncing: Fatal exception This crashed when an LRO packet generated by bnx2x reached a tun device through the bridge. We're supposed to drop it at the bridge. However, because the check was placed in br_forward instead of __br_forward, it's only effective if we are sending the packet through a single port. This patch fixes it by moving the check into __br_forward. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09IPv6: fix to set device name when new IPv6 over IPv6 tunnel device is created.Noriaki TAKAMIYA
When the user creates IPv6 over IPv6 tunnel, the device name created by the kernel isn't set to t->parm.name, which is referred as the result of ioctl(). Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09gianfar: Fix boot hangs while bringing up gianfar ethernetJarek Poplawski
Ira Snyder found that commit 8c7396aebb68994c0519e438eecdf4d5fa9c7844 "gianfar: Merge Tx and Rx interrupt for scheduling clean up ring" can cause hangs. It's because there was removed clearing of interrupts in gfar_schedule_cleanup() (which is called by an interrupt handler) in case when netif scheduling has been disabled. This patch brings back this action and a comment. Reported-by: Ira Snyder <iws@ovro.caltech.edu> Reported-by: Peter Korsgaard <jacmet@sunsite.dk> Bisected-by: Ira Snyder <iws@ovro.caltech.edu> Tested-by: Peter Korsgaard <jacmet@sunsite.dk> Tested-by: Ira Snyder <iws@ovro.caltech.edu> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09netfilter: xt_sctp: sctp chunk mapping doesn't workQu Haoran
When user tries to map all chunks given in argument, kernel works on a copy of the chunkmap, but at the end it doesn't check the copy, but the orginal one. Signed-off-by: Qu Haoran <haoran.qu@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09netfilter: ctnetlink: fix echo if not subscribed to any multicast groupPablo Neira Ayuso
This patch fixes echoing if the socket that has sent the request to create/update/delete an entry is not subscribed to any multicast group. With the current code, ctnetlink would not send the echo message via unicast as nfnetlink_send() would be skip. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09netfilter: ctnetlink: allow changing NAT sequence adjustment in creationPablo Neira Ayuso
This patch fixes an inconsistency in the current ctnetlink code since NAT sequence adjustment bit can only be updated but not set in the conntrack entry creation. This patch is used by conntrackd to successfully recover newly created entries that represent connections with helpers and NAT payload mangling. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09netfilter: nf_conntrack_ipv6: don't track ICMPv6 negotiation messageEric Leblond
This patch removes connection tracking handling for ICMPv6 messages related to Stateless Address Autoconfiguration, MLD, and MLDv2. They can not be tracked because they are massively using multicast (on pre-defined address). But they are not invalid and should not be detected as such. Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09netfilter: fix tuple inversion for Node information requestEric Leblond
The patch fixes a typo in the inverse mapping of Node Information request. Following draft-ietf-ipngwg-icmp-name-lookups-09, "Querier" sends a type 139 (ICMPV6_NI_QUERY) packet to "Responder" which answer with a type 140 (ICMPV6_NI_REPLY) packet. Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09b43: (b2062) Fix crystal frequency calculationsMichael Buesch
This fixes the crystal frequency calculations in the b2062 init code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09b43: Port spec bugfixes for the LP baseband initMichael Buesch
A few bugs were fixed in the LP baseband init specs. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ssb: Add PMU supportMichael Buesch
This adds support for the SSB PMU. A PMU is found on Low-Power devices. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09libertas: pos[4] tested twice, 2nd should be pos[5]Roel Kluin
pos[4] can't be both 0x43 and 0x04, 2nd should be pos[5] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09libertas: if_spi: add ability to call board specific setup/teardown methodsMike Rapoport
In certain cases it is required to perform board specific actions before activating libertas G-SPI interface. These actions may include power up of the chip, GPIOs setup, proper pin-strapping and SPI controller config. This patch adds ability to call board specific setup/teardown methods Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09mac80211: Remove bss information of the current AP when it goes out of rangeVasanthakumar Thiagarajan
There is no point having the bss information of currently associated AP when the AP is detected to be out of range. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath9k: fix reg_notifier() flags used upon a country IELuis R. Rodriguez
The nl80211 rule flags were being used. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09b43: Add LP 2062 radio initMichael Buesch
This adds initialization code for the 2062 radio. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09b43: Add LP-PHY baseband init for >=rev2Michael Buesch
This adds code for the baseband init of LP-PHY >=2. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09iwlwifi: another led naming fixDanny Kukawka
Fixed led device naming for the iwlwifi (iwl-3945) driver. Due to the documentation of the led subsystem/class the naming should be "devicename:colour:function" while not applying sections should be left blank. This should lead to e.g. "iwl-%s::RX" instead of "iwl-%s:RX". Signed-off-by: Danny Kukawka <dkukawka@suse.de> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09rt2x00: fix led namingDanny Kukawka
Fixed led device naming for the rt2x00 driver. Due to the documentation of the led subsystem/class the naming should be "devicename:colour:function" while not applying sections should be left blank. This should lead to e.g. "%s::radio" instead of "%s:radio". Signed-off-by: Danny Kukawka <dkukawka@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09b43legacy: fix led namingDanny Kukawka
Fixed led device naming for the b43legacy driver. Due to the documentation of the led subsystem/class the naming should be "devicename:colour:function" while not applying sections should be left blank. This should lead to e.g. "b43legacy-%s::rx" instead of "b43legacy-%s:rx". Signed-off-by: Danny Kukawka <dkukawka@suse.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath9k: fix led namingDanny Kukawka
Fixed led device naming for the ath9k driver. Due to the documentation of the led subsystem/class the naming should be "devicename:colour:function" while not applying sections should be left blank. This should lead to e.g. "ath9k-%s::rx" instead of "ath9k-%s:rx". Signed-off-by: Danny Kukawka <dkukawka@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09b43: Add LP-PHY register definitionsMichael Buesch
This adds register definitions for the LP-PHY. This also adds a few minor empty function bodies for the LP-init. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09Add new rt73usb USB IDIvo van Doorn
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09cfg80211: add get reg commandLuis R. Rodriguez
This lets userspace request to get the currently set regulatory domain. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09mac80211: do not TX injected frames when not allowedLuis R. Rodriguez
Monitor mode is able to TX by using injected frames. We should not allow injected frames to be sent unless allowed by regulatory rules. Since AP mode uses a monitor interfaces to transmit management frames we have to take care to not break AP mode as well while resolving this. We can deal with this by allowing compliant APs solutions to inform mac80211 if their monitor interface is intended to be used for an AP by setting a cfg80211 flag for the monitor interface. hostapd, for example, currently does its own checks to ensure AP mode is not used on channels which require radar detection. Once such solutions are available it can can add this flag for monitor interfaces. Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09mac80211: convert master interface to netdev_opsJohannes Berg
Also call our own ieee80211_master_setup routine instead of overwriting almost all the values from ether_setup; this loses a few assignments that are pointless on the master interface anyway. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09mac80211: convert to net_device_opsJohannes Berg
Convert to new net_device_ops in 2.6.28 and later. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09mac80211: remove HW_SIGNAL_DBJohannes Berg
Giving the signal in dB isn't much more useful to userspace than giving the signal in unspecified units. This removes some radiotap information for zd1211 (the only driver using this flag), but it helps a lot for getting cfg80211-based scanning which won't support dB, and zd1211 being dB is a little fishy anyway. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath9k: Add debugfs files for printing TX rate detailsSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath9k: Handle mac80211's RC flags for MCS ratesSujith
mac80211 notifies the RC algorithm if RTS/CTS and short preamble are needed. The RC flags for MCS rates are currently not handled by mac80211, and ath9k's RC doesn't set the flags either. Fix this. Also, set the rts_cts_rate_idx inside the RC algorithm. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath9k: Cleanup get_rate() interfaceSujith
The interface to calculate the TX rate for a data frame was convoluted with lots of redundant arguments being passed around. Remove all of that and make it simple. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath5k: properly free rx dma descriptorsFelix Fietkau
When freeing rx dma descriptors, use the right buffer size. Fixes kernel oopses on module unload on ixp4xx and most likely other platforms as well. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09wireless: replace uses of __constant_{endian}Harvey Harrison
The base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 03:27:29 +0000