aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-12-08x86: signal: change type of paramter for sys_rt_sigreturn()Hiroshi Shimamoto
Impact: cleanup on 32-bit Peter pointed this parameter can be changed. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26x86: signal: unify signal_{32|64}.cHiroshi Shimamoto
Impact: cleanup Unify signal_{32|64}.c! Mechanic unification - the two files are the same. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26x86: signal: unify signal_{32|64}.c, prepareHiroshi Shimamoto
Impact: cleanup Add #ifdef directive for 32-bit only code. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26x86: signal: cosmetic unification of __setup_sigframe() and ↵Hiroshi Shimamoto
__setup_rt_sigframe() Impact: cleanup Add #ifdef directive to unify __setup_sigframe() and __setup_rt_sigframe(). Move them after {setup|restore}_sigcontext() declaration. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26x86: signal: move {setup|restore}_sigcontext()Hiroshi Shimamoto
Impact: cleanup Move {setup|restore}_sigcontext() declaration onto head of file. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23x86: signal: cosmetic unification of sys_rt_sigreturn()Hiroshi Shimamoto
Impact: cleanup Add #ifdef directive for unification. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23x86: signal: cosmetic unification of sys_sigaltstack()Hiroshi Shimamoto
Impact: cleanup Add #ifdef directive for unification. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23x86: signal: cosmetic unification of including headersHiroshi Shimamoto
Impact: cleanup Make the headers portion of signal_32.c and signal_64.c the same. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21x86: signal: rename COPY_SEG_STRICT to COPY_SEG_CPL3Hiroshi Shimamoto
Impact: cleanup Rename macro COPY_SEG_STRICT to COPY_SEG_CPL3, as suggested by hpa. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-18x86: ia32_signal: change order of storing in setup_sigcontext()Hiroshi Shimamoto
Impact: cleanup Change order of storing to match the sigcontext_ia32. And add casting to make this code same as arch/x86/kernel/signal_32.c. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-18x86: ia32_signal: remove using temporary variableHiroshi Shimamoto
Impact: cleanup No need to use temporary variable. Also rename the variable same as arch/x86/kernel/signal_32.c. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Reviewed-by: WANG Cong <wangcong@zeuux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-18x86: ia32_signal: cleanup macro RELOAD_SEGHiroshi Shimamoto
Impact: cleanup Remove mask parameter because it's always 3. Cleanup coding styles. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Reviewed-by: WANG Cong <wangcong@zeuux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-18x86: ia32_signal: introduce COPY_SEG_CPL3Hiroshi Shimamoto
Impact: cleanup Introduce COPY_SEG_CPL3 for ia32_restore_sigcontext(). Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-18x86: ia32_signal: cleanup macro COPYHiroshi Shimamoto
Impact: cleanup No need to use temporary variable in this case. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-12x86: ia32_signal: remove unnecessary paddingHiroshi Shimamoto
Impact: reduce structure padding Remove unnecessary paddings, this saves 4 bytes. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-12x86: signal_32: introduce retcode and rt_retcodeHiroshi Shimamoto
Impact: cleanup Introduce retcode and rt_retcode to replace setting up frame->retcode. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-08x86: signal: cosmetic unification of setup_sigcontext()Hiroshi Shimamoto
Impact: cleanup Make setup_sigcontext() same. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06x86: signal_64: make setup_sigcontext() similarHiroshi Shimamoto
Impact: cleanup remove passing task struct. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06x86: signal_64: setup fpstate in setup_sigcontext()Hiroshi Shimamoto
Impact: cleanup set fpstate field of signal context at setup_sigcontext(). Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06x86: ia32_signal: do save_i387_xstate_ia32 at get_sigframe()Hiroshi Shimamoto
Impact: cleanup move calling save_i387_xstate_ia32() into get_sigframe() from setup_sigcontext(). Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06x86: signal_32: do save_i387_xstate() at get_sigframe()Hiroshi Shimamoto
Impact: cleanup move calling save_i387_xstate() into get_sigframe() from setup_sigcontext() like 64bit. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-04x86: signal_64: remove unused code in __setup_rt_frame()Hiroshi Shimamoto
Impact: cleanup sizeof(*set) is always 8 on x86_64. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30x86: signal: cosmetic unification of NR_restart_syscallHiroshi Shimamoto
Impact: cleanup Add #ifdef directive to unify NR_restart_syscall. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30x86: signal: cosmetic unification of macros for setup_rt_frame()Hiroshi Shimamoto
Impact: cleanup Add #ifdef directive for unification. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30x86: signal: cosmetic unification of signr_convert()Hiroshi Shimamoto
Impact: cleanup Make signr_convert() same. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-27x86: signal_64.c: get_stack() doesn't need entire regsHiroshi Shimamoto
Impact: cleanup get_stack() uses sp only, entire regs is not needed. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-27x86: signal: cosmetic unification of restore_sigcontext()Hiroshi Shimamoto
Impact: cleanup Make restore_sigcontext() the same. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-26Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: allow extended partitions on md devices. md: use sysfs_notify_dirent to notify changes to md/dev-xxx/state md: use sysfs_notify_dirent to notify changes to md/array_state
2008-10-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: psmouse - add support for Elantech touchpads Input: i8042 - add Blue FB5601 to noloop exception table
2008-10-26Merge branch 'for-linus' of git://git.o-hand.com/linux-mfdLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: Make WM8400 depend on I2C until SPI is submitted mfd: add missing Kconfig entry for da903x
2008-10-26Merge branch 'for-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb * 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: build UWB before USB/WUSB
2008-10-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Add support for Sony Vaio VGX-TP1E HID: fix lock imbalance in hiddev HID: fix lock imbalance in hidraw HID: fix hidbus/appletouch device binding regression HID: add hid_type to general hid struct HID: quirk for OLED devices present in ASUS G50/G70/G71 HID: Remove "default m" for Thrustmaster and Zeroplus HID: fix hidraw_exit section mismatch HID: add support for another Gyration remote control Revert "HID: Invert HWHEEL mappings for some Logitech mice"
2008-10-26docbooks: fix fatal filename errorsRandy Dunlap
Fix docbook fatal errors (file location changed): docproc: lin2628-rc1/include/asm-x86/io_32.h: No such file or directory make[1]: *** [Documentation/DocBook/deviceiobook.xml] Error 1 docproc: lin2628-rc1/include/asm-x86/atomic_32.h: No such file or directory make[1]: *** [Documentation/DocBook/kernel-api.xml] Error 1 docproc: lin2628-rc1/include/asm-x86/mca_dma.h: No such file or directory make[1]: *** [Documentation/DocBook/mcabook.xml] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26kernel-doc: allow more whitespace in macrosRandy Dunlap
Allow macros that are annotated with kernel-doc to contain whitespace between the '#' and "define". It's valid and being used, so allow it. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: leds-hp-disk: fix build warning ACPI: Oops in ACPI with git latest ACPI suspend: build fix for ACPI_SLEEP=n && XEN_SAVE_RESTORE=y. toshiba_acpi: always call input_sync() after input_report_switch() ACPI: Always report a sync event after a lid state change ACPI: cpufreq, processor: fix compile error in drivers/acpi/processor_perflib.c i7300_idle: Fix compile warning CONFIG_I7300_IDLE_IOAT_CHANNEL not defined i7300_idle: Cleanup based review comments i7300_idle: Disable ioat channel only on platforms where ile driver can load
2008-10-26Linux 2.6.28-rc2Linus Torvalds
.. fix all the worst problems in -rc1
2008-10-26m68k: Disable Amiga serial console support if modularGeert Uytterhoeven
If CONFIG_AMIGA_BUILTIN_SERIAL=m, I get the following warnings: | drivers/char/amiserial.c: At top level: | drivers/char/amiserial.c:2138: warning: data definition has no type or storage class | drivers/char/amiserial.c:2138: warning: type defaults to 'int' in declaration of 'console_initcall' | drivers/char/amiserial.c:2138: warning: parameter names (without types) in function declaration | drivers/char/amiserial.c:2134: warning: 'amiserial_console_init' defined but not used because console_initcall() is not defined (nor really sensible) in the modular case. So disable serial console support if the driver is modular. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26epoll: avoid double-inserts in case of EFAULTDavide Libenzi
In commit f337b9c58332bdecde965b436e47ea4c94d30da0 ("epoll: drop unnecessary test") Thomas found that there is an unnecessary (always true) test in ep_send_events(). The callback never inserts into ->rdllink while the send loop is performed, and also does the ~EP_PRIVATE_BITS test. Given we're holding the mutex during this time, the conditions tested inside the loop are always true. HOWEVER. The test "!ep_is_linked(&epi->rdllink)" wasn't there because we insert into ->rdllink, but because the send-events loop might terminate before the whole list is scanned (-EFAULT). In such cases, when the loop terminates early, and when a (leftover) file received an event while we're performing the lockless loop, we need such test to avoid to double insert the epoll items. The list_splice() done a few steps below, will correctly re-insert the ones that were left on "txlist". This should fix the kenrel.org bugzilla entry 11831. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26select: deal with math overflow from borderline valid userland dataArjan van de Ven
Some userland apps seem to pass in a "0" for the seconds, and several seconds worth of usecs to select(). The old kernels accepted this just fine, so the new kernels must too. However, due to the upscaling of the microseconds to nanoseconds we had some cases where we got math overflow, and depending on the GCC version (due to inlining decisions) that actually resulted in an -EINVAL return. This patch fixes this by adding the excess microseconds to the seconds field. Also with thanks to Marcin Slusarz for spotting some implementation bugs in the diagnostics patches. Reported-by: Carlos R. Mafra <crmafra2@gmail.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26wireless: fix regression caused by regulatory config optionArjan van de Ven
The default for the regulatory compatibility option is wrong; if you picked the default you ended up with a non-functional wifi system (at least I did on Fedora 9 with iwl4965). I don't think even the October 2008 releases of the various distros has the new userland so clearly the default is wrong, and also we can't just go about deleting this in 2.6.29... Change the default to "y" and also adjust the config text a little to reflect this. This patch fixes regression #11859 With thanks to Johannes Berg for the diagnostics Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26cgroup: remove unused variableStephen Rothwell
/scratch/sfr/next/kernel/cgroup.c: In function 'cgroup_tasks_start': /scratch/sfr/next/kernel/cgroup.c:2107: warning: unused variable 'i' Introduced in commit cc31edceee04a7b87f2be48f9489ebb72d264844 "cgroups: convert tasks file to use a seq_file with shared pid array". Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (abituguru3) enable DMI probing feature on AW9D-MAX hwmon: (abituguru3) Cosmetic whitespace fixes hwmon: (adt7473) Fix voltage conversion routines hwmon: (lm90) Add support for the LM99 16 degree offset hwmon: (lm90) Fix handling of hysteresis value hwmon-vid: Add support for AMD family 10h CPUs hwmon: (w83781d) Fix linking when built-in
2008-10-26r8169: revert "read MAC address from EEPROM on init"Francois Romieu
This reverts commit 7bf6bf4803df1adc927f585168d2135fb019c698. The code has both a short existence and an increasing track of failures despite some work to amend it for -rc1. It is not just a matter of reading the eeprom: sometimes the eeprom is read correctly, then the mac address is not written correctly back into the mac registers. Some chipsets seem to work reliably but it is not clear at this point if the code can simply be made to work on a per-chipset basis and post -rc1 is not the place where I want to experiment these things. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26arm ide breakageAl Viro
a) semicolon before the function body is a bad idea b) it's const struct foo, not struct const foo c) incidentally, it's ecard_remove_driver(), not ecard_unregister_driver() d) compiling is occasionally useful. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26fix allmodconfig breakageAl Viro
If you use KCONFIG_ALLCONFIG (even with empty file) you get broken allmodconfig/allyesconfig; CONFIG_MODULES gets turned off, with obvious massive fallout. Breakage had been introduced when conf_set_all_new_symbols() got used for allmodconfig et.al. What happens is that sym_calc_value(modules_sym) done in conf_read_simple() sets SYMBOL_VALID on both modules_sym and MODULES. When we get to conf_set_all_new_symbols(), we set sym->def[S_DEF_USER] on everything, but it has no effect on sym->curr for the symbols that already have SYMBOL_VALID - these are stuck. Solution: use sym_clear_all_valid() in there. Note that it makes reevaluation of modules_sym redundant - sym_clear_all_valid() will do that itself. [ Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11512, says Alexey ] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26hwmon: (abituguru3) enable DMI probing feature on AW9D-MAXAlistair John Strachan
Switch the AW9D-MAX over from port probing to the preferred DMI probe method. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-26hwmon: (abituguru3) Cosmetic whitespace fixesAlistair John Strachan
As the probable result of zealous copy/pasting, many supported boards contain sensor names with trailing whitespace. Though this is not a huge problem, it is inconsistent with other sensor names, and with other similar hwmon drivers. Additionally, the DMI nag message added in 2.6.27 was missing a space between two sentence fragments -- might as well clean that up too. Doesn't alter any kernel text, just data. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-26hwmon: (adt7473) Fix voltage conversion routinesJean Delvare
Fix voltage conversion routines. Based on an earlier patch from Paulius Zaleckas. According to the datasheet voltage is scaled with resistors and value 192 is nominal voltage. 0 is 0V. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Darrick J. Wong <djwong@us.ibm.com>
2008-10-26hwmon: (lm90) Add support for the LM99 16 degree offsetJean Delvare
The LM99 differs from the LM86, LM89 and LM90 in that it reports remote temperatures (temp2) 16 degrees lower than they really are. So far we have been cheating and handled this in userspace but it really should be handled by the driver directly. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org>
2008-10-26hwmon: (lm90) Fix handling of hysteresis valueJean Delvare
There are several problems in the way the hysteresis value is handled by the lm90 driver: * In show_temphyst(), specific handling of the MAX6646 is missing, so the hysteresis is reported incorrectly if the critical temperature is over 127 degrees C. * In set_temphyst(), the new hysteresis register value is written to the chip but data->temp_hyst isn't updated accordingly, so there is a short period of time (up to 2 seconds) where the old hystereris value will be returned while the new one is already active. * In set_temphyst(), the critical temperature which is used as a base to compute the value of the hysteresis register lacks device-specific handling. As a result, the value of the hysteresis register might be incorrect for the ADT7461 and MAX6646 chips. Fix these 3 bugs. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Nate Case <ncase@xes-inc.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 23:55:01 +0000