aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-06-28[POWERPC] Setup RTAS values earlier, to enable rtas_call() earlierMichael Ellerman
Althought RTAS is instantiated when we enter the kernel, we can't actually call into it until we know its entry point address. Currently we grab that in rtas_initialize(), however that's quite late in the boot sequence. To enable rtas_call() earlier, we can grab the RTAS entry etc. values while we're scanning the flattened device tree. There's existing code to retrieve the values from /chosen, however we don't store them there anymore, so remove that code. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Move RTAS exports next to their declarationsMichael Ellerman
Move RTAS exports next to their declarations. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Make rtas_call() safe if RTAS hasn't been initialisedMichael Ellerman
Currently it's unsafe to call rtas_call() prior to rtas_initialize(). This is because the rtas.entry value hasn't been setup and so we don't know where to enter, but we just try anyway. We can't do anything intelligent without rtas.entry, so if it's not set, just return. Code that calls rtas_call() early needs to be aware that the call might fail. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Setup the boot cpu's paca pointer in C rather than asmMichael Ellerman
There's no need to set the boot cpu paca in asm, so do it in C so us mere mortals can understand it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Make kexec_setup() a regular initcallMichael Ellerman
There's no reason kexec_setup() needs to be called explicitly from setup_system(), it can just be a regular initcall. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Use ppc_md.hpte_insert() in htab_bolt_mapping()Michael Ellerman
With the ppc_md htab pointers setup earlier, we can use ppc_md.hpte_insert in htab_bolt_mapping(), rather than deciding which version to call by hand. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] powerpc: Initialise ppc_md htab pointers earlierMichael Ellerman
Initialise the ppc_md htab callbacks earlier, in the probe routines. This allows us to call htab_finish_init() from htab_initialize(), and makes it private to hash_utils_64.c. Move htab_finish_init() and make_bl() above htab_initialize() to avoid forward declarations. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Export flat device tree via debugfs for debuggingMichael Ellerman
If DEBUG is turned on in prom.c, export the flat device tree via debugfs. This has been handy on several occasions. To look at it: # mount -t debugfs none /sys/kernel/debug # od -a /sys/kernel/debug/powerpc/flat-device-tree and/or # dtc -fI dtb /sys/kernel/debug/powerpc/flat-device-tree -O dts Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Remove remaining iSeries debugger cruftMichael Ellerman
None of this seems to be necessary, so let's see if can remove it and not break anything. Booted on iSeries & pSeries here. NB. we don't remove the hvReleaseData, we just move it down so that the file reads more clearly. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] kdump: Reserve the existing TCE mappings left by the first kernelHaren Myneni
During kdump boot, noticed some machines checkstop on dma protection fault for ongoing DMA left in the first kernel. Instead of initializing TCE entries in iommu_init() for the kdump boot, this patch fixes this issue by walking through the each TCE table and checks whether the entries are in use by the first kernel. If so, reserve those entries by setting the corresponding bit in tbl->it_map such that these entries will not be available for the kdump boot. However it could be possible that all TCE entries might be used up due to the driver bug that does continuous mapping. My observation is around 1700 TCE entries are used on some systems (Ex: P4) at some point of time during kdump boot and saving dump (either write into the disk or sending to remote machine). Hence, this patch will make sure that minimum of 2048 entries will be available such that kdump boot could be successful in some cases. Signed-off-by: Haren Myneni <haren@us.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Remove obsolete #include <linux/config.h>.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Remove redundant STD_MMU selection.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Move I8259 selection under MPC8641HPCN boardJon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Remove redundant PPC_86XX check.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Don't access HID registers if running on a Hypervisor.Jimi Xenidis
The following patch avoids accessing Hypervisor privilege HID registers when running on a Hypervisor (MSR[HV]=0). Signed-off-by: Jimi Xenidis <jimix@watson.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Convert powermac ide blink to new led infrastructureJohannes Berg
This patch removes the old pmac ide led blink code and adds generic LED subsystem support for the LED. It maintains backward compatibility with the old BLK_DEV_IDE_PMAC_BLINK Kconfig option which now simply selects the new code and influences the default trigger. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-27[PATCH] fix static linking of NFSDavid Brownell
Builds on ARM report link problems with common configurations like statically linked NFS (for nfsroot). The symptom is that __init section code references __exit section code; that won't work since the exit sections are discarded (since they can never be called). The best fix for these particular cases would be an "__init_or_exit" section annotation. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27Input: fix resetting name, phys and uniq when unregistering deviceDmitry Torokhov
It should be done before calling class_device_unregister() because it will destroy the device and free memory if there are no other references to the device. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26Revert "kbuild: fix make -rR breakage"Linus Torvalds
This reverts commit e5c44fd88c146755da6941d047de4d97651404a9. Thanks to Daniel Ritz and Michal Piotrowski for noticing the problem. Daniel says: "[The] reason is a recent change that made modules always shows as module.mod. it breaks modprobe and probably many scripts..besides lsmod looking horrible stuff like this in modprobe.conf: install pcmcia_core /sbin/modprobe --ignore-install pcmcia_core; /sbin/modprobe pcmcia makes modprobe fork/exec endlessly calling itself...until oom interrupts it" Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (56 commits) [PATCH] fs/ocfs2/dlm/: cleanups ocfs2: fix compiler warnings in dlm_convert_lock_handler() ocfs2: dlm_print_one_mle() needs to be defined ocfs2: remove whitespace in dlmunlock.c ocfs2: move dlm work to a private work queue ocfs2: fix incorrect error returns ocfs2: tune down some noisy messages during dlm recovery ocfs2: display message before waiting for recovery to complete ocfs2: mlog in dlm_convert_lock_handler() should be ML_ERROR ocfs2: retry operations when a lock is marked in recovery ocfs2: use cond_resched() in dlm_thread() ocfs2: use GFP_NOFS in some dlm operations ocfs2: wait for recovery when starting lock mastery ocfs2: continue recovery when a dead node is encountered ocfs2: remove unneccesary spin_unlock() in dlm_remaster_locks() ocfs2: dlm_remaster_locks() should never exit without completing ocfs2: special case recovery lock in dlmlock_remote() ocfs2: pending mastery asserts and migrations should block each other ocfs2: temporarily disable automatic lock migration ocfs2: do not unconditionally purge the lockres in dlmlock_remote() ...
2006-06-26Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3657/1: S3C24XX: Documentation update of Overview.txt [ARM] Update mach-types [ARM] 3656/1: S3C2412: Add S3C2412 and S3C2413 documenation [ARM] 3654/1: add ajeco 1arm sbc support [ARM] fix drivers/mfd/ucb1x00-core.c IRQ probing bug [ARM] 3651/1: S3C24XX: Make arch list more detailed [ARM] 3650/1: S3C2412: Update s3c2410_defconfig [ARM] 3649/1: S3C24XX: Fix capitalisation of CPU on SMDK2440 [ARM] 3612/1: make pci bus optional for ixp4xx platform [ARM] Remove MODE_(SVC|IRQ|FIQ|USR) and DEFAULT_FIQ [ARM] Remove save_lr/restore_pc macros [ARM] Remove partial non-v6 binutils compatibility [ARM] Remove LOADREGS macro [ARM] Remove RETINSTR macro
2006-06-26Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] 8250_pnp: add support for other Wacom tablets
2006-06-26[ARM] 3657/1: S3C24XX: Documentation update of Overview.txtBen Dooks
Patch from Ben Dooks Update the list of supported devices, and remove the changelog. Add SMDK2413 information.-- Signed-off-by: Ben Dooks <ben-linux@fluff.org>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26[ARM] Update mach-typesRussell King
Usual mach-types update. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26[PATCH] fs/ocfs2/dlm/: cleanupsAdrian Bunk
This patch #if 0's the no longer used dlm_dump_lock_resources(). Since this makes dlmdebug.h empty, this patch also removes this header. Additionally, the needlessly global dlm_is_node_recovered() is made static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: fix compiler warnings in dlm_convert_lock_handler()Mark Fasheh
We need to cast to unsigned long long. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: dlm_print_one_mle() needs to be definedMark Fasheh
Fixes compile breakage. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: remove whitespace in dlmunlock.cKurt Hackel
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: move dlm work to a private work queueKurt Hackel
The work that is done can block for long periods of time and so is not appropriate for keventd. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: fix incorrect error returnsKurt Hackel
Use DLM_REJECTED instead of DLM_RECOVERING. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: tune down some noisy messages during dlm recoveryKurt Hackel
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: display message before waiting for recovery to completeKurt Hackel
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: mlog in dlm_convert_lock_handler() should be ML_ERRORKurt Hackel
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: retry operations when a lock is marked in recoveryKurt Hackel
Before checking for a nonexistent lock, make sure the lockres is not marked RECOVERING. The caller will just retry and the state should be fixed up when recovery completes. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: use cond_resched() in dlm_thread()Kurt Hackel
yield() does not yield. cond_resched() does. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: use GFP_NOFS in some dlm operationsKurt Hackel
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: wait for recovery when starting lock masteryKurt Hackel
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: continue recovery when a dead node is encounteredKurt Hackel
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: remove unneccesary spin_unlock() in dlm_remaster_locks()Kurt Hackel
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: dlm_remaster_locks() should never exit without completingKurt Hackel
We cannot restart recovery. Once we begin to recover a node, keep the state of the recovery intact and follow through, regardless of any other node deaths that may occur. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: special case recovery lock in dlmlock_remote()Kurt Hackel
If the previous master of the recovery lock dies, let calc_usage take it down completely and let the caller completely redo the dlmlock() call. Otherwise, there will never be an opportunity to re-master the lockres and recovery wont be able to progress. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: pending mastery asserts and migrations should block each otherKurt Hackel
Use the existing structure for blocking migrations when ASTs are pending to achieve the same result. If we can catch the assert before it goes on the wire, just cancel it and let the migration continue. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: temporarily disable automatic lock migrationKurt Hackel
Now we never change the owner of a lock resource until unmount or node death. This will be re-enabled once some issues in the algorithm used have been resolved. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: do not unconditionally purge the lockres in dlmlock_remote()Kurt Hackel
In dlmlock_remote(), do not call purge_lockres until the lock resource actually changes. otherwise, the mastery info on the lockres will go away underneath the caller. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: increase backoff before waiting for recoveryKurt Hackel
When mastering non-recovery lock resources, additional time was frequently needed to allow the disk heartbeat to catch up with the network timeout. the recovery lock resource is time critical and avoids this path. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: have dlm_pre_master_reco_lockres() ignore dead nodesKurt Hackel
Recovery will spin in dlm_pre_master_reco_lockres if we do not ignore timed-out network responses from dead nodes. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: give the dlm dirty list a reference on the lockresKurt Hackel
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: teach dlm_restart_lock_mastery() to wait on recoveryKurt Hackel
Change behavior of dlm_restart_lock_mastery() when a node goes down. Dump all responses that have been collected and start over. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: gracefully handle stale create_lock messages.Kurt Hackel
This is an error on the sending side, so gracefully error out on the receiving end. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-26ocfs2: update lvb immediately during recoveryKurt Hackel
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-10 16:26:45 +0000