aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-07-25net: convert BUG_TRAP to generic WARN_ONIlpo Järvinen
Removes legacy reinvent-the-wheel type thing. The generic machinery integrates much better to automated debugging aids such as kerneloops.org (and others), and is unambiguous due to better naming. Non-intuively BUG_TRAP() is actually equal to WARN_ON() rather than BUG_ON() though some might actually be promoted to BUG_ON() but I left that to future. I could make at least one BUILD_BUG_ON conversion. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-25drivers/net: convert BUG_TRAP to generic WARN_ONIlpo Järvinen
Removes legacy reinvent-the-wheel type thing. The generic machinery integrates much better to automated debugging aids such as kerneloops.org (and others), and is unambiguous due to better naming. Non-intuively BUG_TRAP() is actually equal to WARN_ON() rather than BUG_ON(). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-25ipsec: ipcomp - Decompress into frags if necessaryHerbert Xu
When decompressing extremely large packets allocating them through kmalloc is prone to failure. Therefore it's better to use page frags instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-25ipsec: ipcomp - Merge IPComp implementationsHerbert Xu
This patch merges the IPv4/IPv6 IPComp implementations since most of the code is identical. As a result future enhancements will no longer need to be duplicated. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-25pkt_sched: Fix locking in shutdown_scheduler_queue()David S. Miller
Qdisc locks need to be held with BH disabled. Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-23pkt_sched: sch_sfq: dump a real number of flowsJarek Poplawski
Dump the "flows" number according to the number of active flows instead of repeating the "limit". Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-23atm: [fore200e] use MODULE_FIRMWARE() and other suggested cleanupsChas Williams
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-23netfilter: make security table depend on NETFILTER_ADVANCEDPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-23tcp: Clear probes_out more aggressively in tcp_ack().David S. Miller
This is based upon an excellent bug report from Eric Dumazet. tcp_ack() should clear ->icsk_probes_out even if there are packets outstanding. Otherwise if we get a sequence of ACKs while we do have packets outstanding over and over again, we'll never clear the probes_out value and eventually think the connection is too sick and we'll reset it. This appears to be some "optimization" added to tcp_ack() in the 2.4.x timeframe. In 2.2.x, probes_out is pretty much always cleared by tcp_ack(). Here is Eric's original report: ---------------------------------------- Apparently, we can in some situations reset TCP connections in a couple of seconds when some frames are lost. In order to reproduce the problem, please try the following program on linux-2.6.25.* Setup some iptables rules to allow two frames per second sent on loopback interface to tcp destination port 12000 iptables -N SLOWLO iptables -A SLOWLO -m hashlimit --hashlimit 2 --hashlimit-burst 1 --hashlimit-mode dstip --hashlimit-name slow2 -j ACCEPT iptables -A SLOWLO -j DROP iptables -A OUTPUT -o lo -p tcp --dport 12000 -j SLOWLO Then run the attached program and see the output : # ./loop State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,200ms,1) State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,200ms,3) State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,200ms,5) State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,200ms,7) State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,200ms,9) State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,200ms,11) State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,201ms,13) State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,188ms,15) write(): Connection timed out wrote 890 bytes but was interrupted after 9 seconds ESTAB 0 0 127.0.0.1:12000 127.0.0.1:54455 Exiting read() because no data available (4000 ms timeout). read 860 bytes While this tcp session makes progress (sending frames with 50 bytes of payload, every 500ms), linux tcp stack decides to reset it, when tcp_retries 2 is reached (default value : 15) tcpdump : 15:30:28.856695 IP 127.0.0.1.56554 > 127.0.0.1.12000: S 33788768:33788768(0) win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7> 15:30:28.856711 IP 127.0.0.1.12000 > 127.0.0.1.56554: S 33899253:33899253(0) ack 33788769 win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7> 15:30:29.356947 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 1:61(60) ack 1 win 257 15:30:29.356966 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 61 win 257 15:30:29.866415 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 61:111(50) ack 1 win 257 15:30:29.866427 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 111 win 257 15:30:30.366516 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 111:161(50) ack 1 win 257 15:30:30.366527 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 161 win 257 15:30:30.876196 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 161:211(50) ack 1 win 257 15:30:30.876207 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 211 win 257 15:30:31.376282 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 211:261(50) ack 1 win 257 15:30:31.376290 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 261 win 257 15:30:31.885619 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 261:311(50) ack 1 win 257 15:30:31.885631 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 311 win 257 15:30:32.385705 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 311:361(50) ack 1 win 257 15:30:32.385715 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 361 win 257 15:30:32.895249 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 361:411(50) ack 1 win 257 15:30:32.895266 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 411 win 257 15:30:33.395341 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 411:461(50) ack 1 win 257 15:30:33.395351 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 461 win 257 15:30:33.918085 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 461:511(50) ack 1 win 257 15:30:33.918096 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 511 win 257 15:30:34.418163 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 511:561(50) ack 1 win 257 15:30:34.418172 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 561 win 257 15:30:34.927685 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 561:611(50) ack 1 win 257 15:30:34.927698 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 611 win 257 15:30:35.427757 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 611:661(50) ack 1 win 257 15:30:35.427766 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 661 win 257 15:30:35.937359 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 661:711(50) ack 1 win 257 15:30:35.937376 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 711 win 257 15:30:36.437451 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 711:761(50) ack 1 win 257 15:30:36.437464 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 761 win 257 15:30:36.947022 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 761:811(50) ack 1 win 257 15:30:36.947039 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 811 win 257 15:30:37.447135 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 811:861(50) ack 1 win 257 15:30:37.447203 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 861 win 257 15:30:41.448171 IP 127.0.0.1.12000 > 127.0.0.1.56554: F 1:1(0) ack 861 win 257 15:30:41.448189 IP 127.0.0.1.56554 > 127.0.0.1.12000: R 33789629:33789629(0) win 0 Source of program : /* * small producer/consumer program. * setup a listener on 127.0.0.1:12000 * Forks a child * child connect to 127.0.0.1, and sends 10 bytes on this tcp socket every 100 ms * Father accepts connection, and read all data */ #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <unistd.h> #include <stdio.h> #include <time.h> #include <sys/poll.h> int port = 12000; char buffer[4096]; int main(int argc, char *argv[]) { int lfd = socket(AF_INET, SOCK_STREAM, 0); struct sockaddr_in socket_address; time_t t0, t1; int on = 1, sfd, res; unsigned long total = 0; socklen_t alen = sizeof(socket_address); pid_t pid; time(&t0); socket_address.sin_family = AF_INET; socket_address.sin_port = htons(port); socket_address.sin_addr.s_addr = htonl(INADDR_LOOPBACK); if (lfd == -1) { perror("socket()"); return 1; } setsockopt(lfd, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(int)); if (bind(lfd, (struct sockaddr *)&socket_address, sizeof(socket_address)) == -1) { perror("bind"); close(lfd); return 1; } if (listen(lfd, 1) == -1) { perror("listen()"); close(lfd); return 1; } pid = fork(); if (pid == 0) { int i, cfd = socket(AF_INET, SOCK_STREAM, 0); close(lfd); if (connect(cfd, (struct sockaddr *)&socket_address, sizeof(socket_address)) == -1) { perror("connect()"); return 1; } for (i = 0 ; ;) { res = write(cfd, "blablabla\n", 10); if (res > 0) total += res; else if (res == -1) { perror("write()"); break; } else break; usleep(100000); if (++i == 10) { system("ss -on dst 127.0.0.1:12000"); i = 0; } } time(&t1); fprintf(stderr, "wrote %lu bytes but was interrupted after %g seconds\n", total, difftime(t1, t0)); system("ss -on | grep 127.0.0.1:12000"); close(cfd); return 0; } sfd = accept(lfd, (struct sockaddr *)&socket_address, &alen); if (sfd == -1) { perror("accept"); return 1; } close(lfd); while (1) { struct pollfd pfd[1]; pfd[0].fd = sfd; pfd[0].events = POLLIN; if (poll(pfd, 1, 4000) == 0) { fprintf(stderr, "Exiting read() because no data available (4000 ms timeout).\n"); break; } res = read(sfd, buffer, sizeof(buffer)); if (res > 0) total += res; else if (res == 0) break; else perror("read()"); } fprintf(stderr, "read %lu bytes\n", total); close(sfd); return 0; } ---------------------------------------- Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-23e1000e: fix e1000_netpoll(), remove extraneous e1000_clean_tx_irq() callIngo Molnar
Evgeniy Polyakov noticed that drivers/net/e1000e/netdev.c:e1000_netpoll() was calling e1000_clean_tx_irq() without taking the TX lock. David Miller suggested to remove the call altogether: since in this callpah there's periodic calls to ->poll() anyway which will do e1000_clean_tx_irq() and will garbage-collect any finished TX ring descriptors. This fix solved the e1000e+netconsole crashes i've been seeing: ============================================================================= BUG skbuff_head_cache: Poison overwritten ----------------------------------------------------------------------------- INFO: 0xf658ae9c-0xf658ae9c. First byte 0x6a instead of 0x6b INFO: Allocated in __alloc_skb+0x2c/0x110 age=0 cpu=0 pid=5098 INFO: Freed in __kfree_skb+0x31/0x80 age=0 cpu=1 pid=4440 INFO: Slab 0xc16cc140 objects=16 used=1 fp=0xf658ae00 flags=0x400000c3 INFO: Object 0xf658ae00 @offset=3584 fp=0xf658af00 Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-23net: Update entry in af_family_clock_key_stringsOliver Hartkopp
In the merge phase of the CAN subsystem the af_family_clock_key_strings[] have been added to sock.c in commit 443aef0eddfa44c158d1b94ebb431a70638fcab4 (lockdep: fixup sk_callback_lock annotation). This trivial patch adds the missing name for address family 29 (AF_CAN). Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-23netdev: Remove warning from __netif_schedule().David S. Miller
It isn't helping anything and we aren't going to be able to change all the drivers that do queue wakeups in strange situations. Just letting a noop_qdisc get scheduled will work because when qdisc_run() executes via net_tx_work() it will simply find no packets pending when it makes the ->dequeue() call in qdisc_restart. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22sky2: don't stop queue on shutdownStephen Hemminger
It is unnecessary, to stop queue and turn off carrier in shutdown routine. With new netdev_queue this causes warnings. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (82 commits) ipw2200: Call netif_*_queue() interfaces properly. netxen: Needs to include linux/vmalloc.h [netdrvr] atl1d: fix !CONFIG_PM build r6040: rework init_one error handling r6040: bump release number to 0.18 r6040: handle RX fifo full and no descriptor interrupts r6040: change the default waiting time r6040: use definitions for magic values in descriptor status r6040: completely rework the RX path r6040: call napi_disable when puting down the interface and set lp->dev accordingly. mv643xx_eth: fix NETPOLL build r6040: rework the RX buffers allocation routine r6040: fix scheduling while atomic in r6040_tx_timeout r6040: fix null pointer access and tx timeouts r6040: prefix all functions with r6040 rndis_host: support WM6 devices as modems at91_ether: use netstats in net_device structure sfc: Create one RX queue and interrupt per CPU package by default sfc: Use a separate workqueue for resets sfc: I2C adapter initialisation fixes ...
2008-07-22Re-delete zombie 'drivers/usb/serial/airprime.c' fileLinus Torvalds
Stephen Rothwell points out that this file got deleted (on purpose) by commit 640c1bce86d1e11ee6a1263fdf6170d3210b1684 ("USB: delete airprime driver"), but then almost immediately incorrectly resurrected by commit 95da310e66ee8090119596c70ca8432e57f9a97f ("usb_serial: API all change"). Delete it again. If it comes back, we'll need to drive a stake through its heart. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32: pass -m32 when building vmlinux.lds sparc: Fixes the DRM layer build on sparc. ide: merge <asm-sparc/ide_64.h> with <asm-sparc/ide_32.h> ide: <asm-sparc/ide_64.h>: use __raw_{read,write}w() ide: <asm-sparc/ide_32.h>: use __raw_{read,write}w() ide: <asm-sparc/ide_64.h>: use %r0 for outw_be() sparc64: Do not define BIO_VMERGE_BOUNDARY.
2008-07-22ipw2200: Call netif_*_queue() interfaces properly.David S. Miller
netif_carrier_{on,off}() handles starting and stopping packet flow into the driver. So there is no reason to invoke netif_stop_queue() and netif_wake_queue() in response to link status events. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22netxen: Needs to include linux/vmalloc.hDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-07-22[netdrvr] atl1d: fix !CONFIG_PM buildJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-07-22r6040: rework init_one error handlingFlorian Fainelli
This patch reworks the error handling in r6040_init_one in order not to leak resources and correcly unmap and release PCI regions of the MAC. Also prefix printk's with the driver name for clarity. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: bump release number to 0.18Florian Fainelli
This patch bumps the release of the r6040 driver. There has been quite some versions of it out there, but this one is the one people should report bugs against. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: handle RX fifo full and no descriptor interruptsFlorian Fainelli
This patch allows the MAC to handle the RX FIFO full and no descriptor available interrupts. While we are at it replace the TX interrupt with its corresponding definition. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: change the default waiting timeFlorian Fainelli
This patch changes the default waiting time of a packet, which along with our previous r6040_rx path, was causing huge delays with another host (160 to 230 ms). Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: use definitions for magic values in descriptor statusFlorian Fainelli
Define all the descriptor status the MAC can set. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: completely rework the RX pathFlorian Fainelli
This patch completely reworks the RX path in order to be more accurate about what is going on with the MAC. We no longer read the error from the MLSR register instead read the descriptor status register which reflects, the error per descriptor. We now allocate skbs on the fly in r6040_rx, and we handle allocation failure instead of simply dropping the packet. Remove the rx_free_desc counter of r6040_private structure since we allocate skbs in the RX path. r6040_rx_buf_alloc is now removed and becomes unuseless. Signed-Off-By: Joerg Albert <jal2@gmx.de> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: call napi_disable when puting down the interface and set lp->dev ↵Florian Fainelli
accordingly. We did not call napi_disabled when putting down the interface which should be done. Finally initialize lp->dev when everything is set. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22mv643xx_eth: fix NETPOLL buildLennert Buytenhek
Joseph Fannin <jfannin@gmail.com> and Takashi Iwai <tiwai@suse.de> noticed that commit 073a345c04b01da0cc5b79ac7be0c7c8b1691ef5 ("mv643xx_eth: clarify irq masking and unmasking") broke the mv643xx_eth build when NETPOLL is enabled, due to it not renaming one instance of INT_CAUSE_EXT in mv643xx_eth_netpoll(). This patch takes care of that instance as well. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Cc: Dale Farnsworth <dale@farnsworth.org> Cc: Joseph Fannin <jfannin@gmail.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: rework the RX buffers allocation routineFlorian Fainelli
Rework the RX buffers allocation function so that we do not leak memory in the case we could not allocate skbs for the RX path. Propagate the errors to the r6040_up function where we call the RX buffers allocation function. Also rename the r6040_alloc_txbufs function to r6040_init_txbufs, to reflect what it really does. Signed-Off-By: Joerg Albert <jal2@gmx.de> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: fix scheduling while atomic in r6040_tx_timeoutFlorian Fainelli
Add a helper function which only modifies R6040 MAC registers use it when we timeout, and on adapter initialization. Fix the scheduling while atomic but in the timeout routine due to the reallocation of rx/tx buffers. Signed-Off-By: Joerg Albert <jal2@gmx.de> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: fix null pointer access and tx timeoutsFlorian Fainelli
This patch fixes a null pointer access in r6040_rx due to lp->dev not being initialized. Fix the TX timeouts, TX irq was not re-enabled on RX irq Signed-Off-By: Joerg Albert <jal2@gmx.de> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: prefix all functions with r6040Florian Fainelli
Prefix all functions inside the r6040 driver with r6040 to avoid namespace clashing. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22rndis_host: support WM6 devices as modemsThomas Backlund
This patch allows Windows Mobile 6 devices to be used for tethering -- that is, used as modems. It was requested by AdamW in kernel bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=11119 and Mandriva kernel-discuss list. It is tested and confirmed to work by Peterl: http://forum.eeeuser.com/viewtopic.php?pid=323543#p323543 This patch is based on the patch in the above kernel bugzilla, which is from the usb-rndis-lite tree. [ dbrownell@users.sourceforge.net: misc fixes ] Signed-off-by: Thomas Backlund <tmb@mandriva.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22at91_ether: use netstats in net_device structurePaulius Zaleckas
Use net_device_stats from net_device structure instead of local. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22sfc: Create one RX queue and interrupt per CPU package by defaultBen Hutchings
Using multiple cores in the same package to handle received traffic does not appear to provide a performance benefit. Therefore use CPU topology information to count CPU packages and use that as the default number of RX queues and interrupts. We rely on interrupt balancing to spread the interrupts across packages. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22sfc: Use a separate workqueue for resetsBen Hutchings
This avoids deadlock in case a reset is triggered during self-test. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22sfc: I2C adapter initialisation fixesBen Hutchings
As recommended by Jean Delvare: - Increase timeout to 50 ms - Leave adapter class clear so that unwanted drivers do not probe our bus - Use strlcpy() for name initialisation Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: make ioport freeTaku Izumi
This patch makes e1000 driver ioport-free. This corrects behavior in probe function so as not to request ioport resources as long as they are not really needed. This is based on the ioport-free patch of e1000 driver from Auke Kok and Tomohiro Kusumi. Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jeff Kirsher<jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: delete non NAPI code from the driverFrancois Romieu
Compile-tested only. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: remove email referenceJeff Kirsher
The email linux-nics@intel.com is no longer available, remove all references. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: Move assignments in tests before testJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: checkpatch cleanJoe Perches
Redefine DPRINTK macro using do while(0) __FUNCTION__ to __func__ structs {} on separate lines Surround negative constants with () Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: Remove spaces after casts and function namesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: Move extern function definitions to e1000.hJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: Use hw, er32, and ew32Joe Perches
Use struct e1000_hw *hw = adapter->hw; where necessary Change macros E1000_READ_REG and E1000_WRITE_REG to er32 and ew32 Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: neaten function declarationsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22Fix typo in meth driverChristoph Lameter
An | in an if statement to check a bit? I think this needs to be a &. As a result of this typo meth will always operate in promiscuous mode. Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22atl1e: Atheros L1E Gigabit Ethernet driverJie Yang
Full patch for the Atheros L1E Gigabit Ethernet driver. Supportring AR8121, AR8113 and AR8114 Signed-off-by: Jie Yang <jie.yang @atheros.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22ixgbe: remove device ID for unsupported deviceJesse Brandeburg
The ixgbe driver was untested with device ID 8086:10c8 but still advertises support. Currently if this device is present in the system when the driver is loaded, the system will panic. Remove this device ID until full support can be tested with available hardware. This patch is necessary for 2.6.24, 2.6.25 and 2.6.26 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 23:33:58 +0000