aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-08-14p54: Write outside array boundsChristian Lamparter
This patch fixes a coding error which allowed the to upper-layer to corrupt limited portions of the phy data. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14b43: Fix hardware key index handlingMichael Buesch
This fixes the hardware encryption keys index and array size handling. Thanks to Gregor Kowski for reporting this issue. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: fix alignment problem in scan requestJohannes Berg
The memory layout for scan requests was rather wrong, we put the scan SSIDs before the channels which could lead to the channel pointers being unaligned in memory. It turns out that using a pointer to the channel array isn't necessary anyway since we can embed a zero-length array into the struct. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14mac80211: allow DMA optimisationJohannes Berg
If we have a lot of frames to transmit at once, for instance with fragmentation, it can be an optimisation to only tell the DMA engine about them on the last fragment/frame to avoid banging the IO too much. This patch allows implementation such an optimisation by telling the driver when more frames can be expected. Currently, this is used by mac80211 only on fragmented frames, but could also be used in the future on other frames when the queue was full and there are multiple frames pending. Note that drivers need to be careful when using this flag, they need to kick their DMA engines not just when this flag is clear, but also when the queue gets full so that progress can be made. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14mac80211: document TX powersave filter requirementsJohannes Berg
This documents what's required to implement that TX powersave filter properly wrt. handling hardware queues. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14mac80211: explain TX retry and statusJohannes Berg
Add some more documentation including an example so that it's clearer what should be done for TX retries. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14nl80211: add generation number to all dumpsJohannes Berg
In order for userspace to be able to figure out whether it obtained a consistent snapshot of data or not when using netlink dumps, we need to have a generation number in each dump message that indicates whether the list has changed or not -- its value is arbitrary. This patch adds such a number to all dumps, this needs some mac80211 involvement to keep track of a generation number to start with when adding/removing mesh paths or stations. The wiphy and netdev lists can be fully handled within cfg80211, of course, but generation numbers need to be stored there as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: use reassociation when possibleJohannes Berg
With the move of everything related to the SME from mac80211 to cfg80211, we lost the ability to send reassociation frames. This adds them back, but only for wireless extensions. With the userspace SME, it shall control assoc vs. reassoc (it already can do so with the nl80211 interface). I haven't touched the connect() implementation, so it is not possible to reassociate with the nl80211 connect primitive. I think that should be done with the NL80211_CMD_ROAM command, but we'll have to see how that can be handled in the future, especially with fullmac chips. This patch addresses only the immediate regression we had in mac80211, which previously sent reassoc. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: validate channel settings across interfacesJohannes Berg
Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: hack to disable filters for fixing associationKalle Valo
Commit 9cef8737 "mac80211: fix managed mode BSSID handling" broke association in wl1251, most probably because the driver configured the bssid filter incorrectly. Workaround this by disabling filter altogether. This needs to be fixed properly soon. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: add hw scan completed debug messageKalle Valo
The logs currently don't show when hw scan has completed, fix that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: remove Luciano as maintainerKalle Valo
Luciano is maintaining wl1271 part. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: rename reg.h to wl1251_reg.hKalle Valo
Now that wl1271 doesn't use reg.h anymore, it can be renamed to wl1251_reg.h. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: use workqueue provided by mac80211Kalle Valo
wl1251 should use workqueue created by mac80211 to not block the events workqueue too long. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: move wl1251_acx_wake_up_conditions() to wl1251_ps_set_mode()Kalle Valo
It should not be hidden inside wl1251_cmd_ps_mode(). Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: fix channel setting in wl1251_op_config()Kalle Valo
There is a bug in wl1251_op_config(). It was calling join with previous channel. Fix it by setting assigning wl->channel before calling join command. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: create wl1251_join()Kalle Valo
Better to use wl1251_cmd_join() only for sending the command and move the logic to wl1251_join(). Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: add channel to wl1251_cmd_join() parametersKalle Valo
Because join channel tunes to a channel, better to make it more obvious by adding a parameter for it. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: initialise default channel to zeroKalle Valo
Because wl->channel was initialised to one, the first join command in wl1251_op_config() always failed. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: remove wait parameter from wl1251_cmd_join()Kalle Valo
We should wait everytime for the join command to finish, not waiting for it might create problems. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: use beacon interval and dtim period provided by mac80211Kalle Valo
wl1251 was using hardcoded beacon intervals and dtim periods, use the ones provided by mac80211 instead. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: reorder wl1251_cmd_join() argumentsKalle Valo
It's more common to have beacon interval before dtim period. Also use bool instead of u8. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: remove wl1251_opsKalle Valo
Now wl1271 is splitted to separate files, no need to use wl1251_ops anymore. So remove struct wl1251_chip and wl1251_ops.c. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: make irq handling interface specificBob Copeland
In SDIO, the host driver requests the IRQ and invokes a callback to the card driver. This differs from SPI, so the relevant code needs to be interface-specific. This patch pushes the irq code down into _spi.c and _sdio.c, and adds enable/disable callbacks. This fixes the following warning: [ 566.343887] ------------[ cut here ]------------ [ 566.349105] WARNING: at kernel/irq/manage.c:222 __enable_irq+0x3c/0x6c() [ 566.356735] Unbalanced enable for IRQ 0 [ 566.361099] Modules linked in: msm_wifi wl12xx_sdio wl12xx mac80211 cfg80211 rfkill_backport lib80211_crypt_ccmp lib80211_crypt_wep lib80211_crypt_tkip lib80211 [ 566.381240] [<c025acec>] (dump_stack+0x0/0x14) from [<c004b610>] (warn_slowpath+0x70/0x8c) [ 566.391860] [<c004b5a0>] (warn_slowpath+0x0/0x8c) from [<c0077c10>] (__enable_irq+0x3c/0x6c) [ 566.402572] r3:00000000 r2:c02cad13 [ 566.407516] r7:00001002 r6:00000000 r5:c0310be4 r4:c0310be4 [ 566.415786] [<c0077bd4>] (__enable_irq+0x0/0x6c) from [<c0077fd0>] (enable_irq+0x38/0x64) [ 566.425826] r5:c0310be4 r4:a0000013 [ 566.430709] [<c0077f98>] (enable_irq+0x0/0x64) from [<bf0dfa78>] (wl12xx_boot_run_firmware+0xfc/0x170 [wl12xx]) [ 566.442947] r7:00001002 r6:c440a9fc r5:00000072 r4:c440a9e0 [ 566.450851] [<bf0df97c>] (wl12xx_boot_run_firmware+0x0/0x170 [wl12xx]) from [<bf0e05f0>] (wl1251_boot+0xd4/0x108 [wl12xx]) [ 566.464492] r5:00000000 r4:c440a9e0 [ 566.469466] [<bf0e051c>] (wl1251_boot+0x0/0x108 [wl12xx]) from [<bf0dd27c>] (wl12xx_op_start+0x54/0xb8 [wl12xx]) [ 566.482162] r5:00000000 r4:c440a9e0 [ 566.487472] [<bf0dd228>] (wl12xx_op_start+0x0/0xb8 [wl12xx]) from [<bf0b96dc>] (ieee80211_open+0x2dc/0x720 [mac80211]) [ 566.500594] r7:00001002 r6:c4950800 r5:c440a220 r4:00000000 [ 566.508865] [<bf0b9400>] (ieee80211_open+0x0/0x720 [mac80211]) from [<c01f1edc>] (dev_open+0x9c/0xfc) [ 566.520705] [<c01f1e40>] (dev_open+0x0/0xfc) from [<c01f17dc>] (dev_change_flags+0x98/0x170) [ 566.531417] r5:00000041 r4:c4950800 [ 566.536330] [<c01f1744>] (dev_change_flags+0x0/0x170) from [<c023041c>] (devinet_ioctl+0x3a8/0x784) [ 566.547683] r7:c128e380 r6:00000001 r5:00008914 r4:00000000 [ 566.555587] [<c0230074>] (devinet_ioctl+0x0/0x784) from [<c02318cc>] (inet_ioctl+0xdc/0x114) [ 566.566299] [<c02317f0>] (inet_ioctl+0x0/0x114) from [<c01e1a60>] (sock_ioctl+0x1f0/0x248) [ 566.576827] r5:00008914 r4:c572c1a0 [ 566.581771] [<c01e1870>] (sock_ioctl+0x0/0x248) from [<c00b23a0>] (vfs_ioctl+0x34/0x94) [ 566.592086] r7:c572c1a0 r6:bee497e8 r5:00008914 r4:c572c1a0 [ 566.599990] [<c00b236c>] (vfs_ioctl+0x0/0x94) from [<c00b2a28>] (do_vfs_ioctl+0x52c/0x584) [ 566.610549] r7:c572c1a0 r6:00008914 r5:c572c1a0 r4:c3201228 [ 566.618453] [<c00b24fc>] (do_vfs_ioctl+0x0/0x584) from [<c00b2ac0>] (sys_ioctl+0x40/0x64) [ 566.628890] [<c00b2a80>] (sys_ioctl+0x0/0x64) from [<c0021da0>] (ret_fast_syscall+0x0/0x2c) [ 566.639541] r7:00000036 r6:00000000 r5:00000004 r4:001a11f3 [ 566.647445] ---[ end trace 15c26ef7dd5e7b03 ]--- Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: add sdio supportBob Copeland
This adds the wl1251_sdio module, enabling the SDIO interface for wl1251, as used by the Google G1 phone and others. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: split spi interface into separate moduleBob Copeland
This creates a module called wl1251_spi.ko which contains just the SPI-specific code. The core remains in the module wl1251.ko. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: move module probe methods into spi.cBob Copeland
This change moves all of the spi specific code from main.c into spi.c. The module initialization code also moves, but common code for initializing mac80211 etc. stays in main.c, as this will eventually form a common library module also used by wl1251_sdio. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: make wl1251_set_partition bus agnosticBob Copeland
The same partition setting code can be used for both SPI and SDIO modes, if we remove the spi-specific commands and use the more generic buffer write routines. Do that and move it to io.c since it deals with register/memory address offsets. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: introduce wl1251_if_operations structBob Copeland
Introduce an ops struct with read, write, and reset functions to abstract away the details of the wl1251 bus interface. Doing this will allow SDIO to coexist with SPI by supplying its own I/O routines. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: use wiphy_dev instead of wl->spi->devBob Copeland
Remove a dependency on the bus-specific struct device by using wiphy_dev when requesting firmware. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: separate bus i/o code into io.cBob Copeland
In order to eventually support wl1251 spi and sdio interfaces, move the register and memory transfer functions to a common file. Also rename wl1251_spi_mem_{read,write} to indicate its common usage. We still use spi_read internally until SDIO interface is introduced so nothing functional should change here. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: remove fixed address support from spi commandsKalle Valo
The fixed addresses are not used in wl1251, only in wl1271. So it can be safely removed. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Update beacon RSSISujith
ANI uses the beacon RSSI for its operation. Update this properly. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Remove local chainmask variableSujith
The chainmask can be obtained directly from ath_hw. Also, use a helper macro for comparing CTLs - this improves readability. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Cleanup TX power calculation for 4K chipsSujith
Write CCK power-per-rate array always and report correct TX power to regulatory. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Clean antenna configuration for 4K EEPROM chipsSujith
This patch revamps the antenna configuration mechanism for 4K chips. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Add macros for Antenna DiversitySujith
A subsequent patch would use these for configuring antennae on AR9285. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Cleanup ath9k_hw_4k_set_gain() interfaceSujith
regChainOffset is always zero, remove it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Split eeprom.c into manageable piecesSujith
Add eeprom_def.c, eeprom_4k.c and eeprom_9287.c This improves maintainability. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Remove a few DEBUG mesagesSujith
We have never used these at all. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Try to fix whitespace damageSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Cleanup function return typesSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Remove unneeded assignment of protocol fieldSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: Set WEP ciphersSamuel Ortiz
With iwconfig there is no way to properly set the ciphers when trying to connect to a WEP SSID. Although mac80211 based drivers dont need it, several fullmac drivers do. This patch basically sets the WEP ciphers whenever they're not set at all. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: fix SME association after disassociationJohannes Berg
When an AP disassociates us, we currently go into a weird state because the SME doesn't handle authenticated but not associated well unless it's within its own state machine, it can't recover from that. However, it shouldn't need to, since we don't do any decisions in it really -- so when we get disconnected, simply deauthenticate too. Reported-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: fix nl80211 disconnected eventsJohannes Berg
When reporting a disconnection to userspace, we try to report whether it was from the AP or by our own choice. However, we misreported a broadcast deauth or disassoc as being by own choice, which is wrong. Fix this by checking the sender address instead of the destination address. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14mac80211: stay authenticated after disassocJohannes Berg
After being disassociated by the AP, mac80211 currently reports this to cfg80211, and then goes to delete the association. That's fine, but cfg80211 assumes that it's still authenticated, however, mac80211 throws away all state. This fixes mac80211 to keep track of the authentication in that case so that cfg80211 can request a deauth or new association properly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1271: add wl1271 to Kconfig and the MakefileLuciano Coelho
This patch adds support for the wl1271 driver in the Kconfig and in the Makefile. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1271: add wl1271 driver filesLuciano Coelho
This driver supports the wl1271 chipset from Texas Instruments based on the WiLink(tm) 6.0 mobile platform. Support for wl1273 should be relatively easy to add. This chipset is designed for embedded devices, with good powersaving capabilities. The wl1271 chipset is the successor of wl1251 and supports the 802.11b/g/n standards, but currently this driver supports only b/g. More information about this chipset can be found here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12762&contentId=29993 Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: fix disassociation warning due to misuse of wdev->current_bssPavel Roskin
WARN_ON was triggered at mlme.c:213 when dissociating from an AP. wdev->current_bss->pub.bssid should be used in place of wdev->current_bss for BSSID comparison. Signed-off-by: Pavel Roskin <proski@gnu.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 05:58:50 +0000