aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-09-12Merge branch 'master' into develRussell King
2009-09-12Merge branch 'devel-stable' into develRussell King
Conflicts: MAINTAINERS arch/arm/mm/fault.c
2009-09-12Merge branches 'arm', 'at91', 'bcmring', 'ep93xx', 'mach-types', 'misc' and ↵Russell King
'w90x900' into devel
2009-09-12[ARM] Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-12ARM: 5636/1: Move vendor enum to AMBA includeLinus Walleij
This moves the primecell vendor enum definition inside vic.c out to linux/amba/bus.h where it belongs and replace any occurances of specific vendor ID:s with the respective enums instead. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-12Merge branch 'nomadik' into devel-stableRussell King
2009-09-12ARM: Fix pfn_valid() for sparse memoryRussell King
On OMAP platforms, some people want to declare to segment up the memory between the kernel and a separate application such that there is a hole in the middle of the memory as far as Linux is concerned. However, they want to be able to mmap() the hole. This currently causes problems, because update_mmu_cache() thinks that there are valid struct pages for the "hole". Fix this by making pfn_valid() slightly more expensive, by checking whether the PFN is contained within the meminfo array. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Khasim Syed Mohammed <khasim@ti.com>
2009-09-08Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stableRussell King
2009-09-08[ARM] orion5x: Add LaCie NAS 2Big Network supportSimon Guinot
This patch add support for the 2Big Network LaCie boards. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-09-08Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-09-07[ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resumePavel Machek
sharpsl_pm.c code tries to read battery state very early during resume, but those battery meters are connected on SPI and that's only resumed way later. Replace the check with simple checking of battery fatal signal, that actually works at this stage. Signed-off-by: Pavel Machek <pavel@ucw.cz> Tested-by: Stanislav Brabec <utx@penguin.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-06ARM: 5686/1: at91: Correct AC97 reset line in at91sam9263ek boardNicolas Ferre
Board code was wrongly setting up the reset pin for AC97 on at91sam9263ek. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-06ARM: 5640/1: This patch modifies the support of AC97 on the at91sam9263 ek boardsedji gaouaou
This patch modifies the support of AC97 on the at91sam9263 ek board, so it would share the code with AVR32. Plus it removes a typo in at91sam9263_devices.c. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-06ARM: 5689/1: Update default config of HP Jornada 700-series machinesKristoffer Ericson
This patch updates the default config for HP Jornada 700-series handhelds. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-04ARM: 5691/1: fix cache aliasing issues between kmap() and kmap_atomic() with ↵Nicolas Pitre
highmem Let's suppose a highmem page is kmap'd with kmap(). A pkmap entry is used, the page mapped to it, and the virtual cache is dirtied. Then kunmap() is used which does virtually nothing except for decrementing a usage count. Then, let's suppose the _same_ page gets mapped using kmap_atomic(). It is therefore mapped onto a fixmap entry instead, which has a different virtual address unaware of the dirty cache data for that page sitting in the pkmap mapping. Fortunately it is easy to know if a pkmap mapping still exists for that page and use it directly with kmap_atomic(), thanks to kmap_high_get(). And actual testing with a printk in the added code path shows that this condition is actually met *extremely* frequently. Seems that we've been quite lucky that things have worked so well with highmem so far. Cc: stable@kernel.org Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-02ARM: 5688/1: ks8695_serial: disable_irq() lockupDick Hollenbeck
disable_irq() cannot be called from interrupt context without self imposed deadlock. This was happening in ks8695uart_stop_tx(). Signed-off-by: Dick Hollenbeck <dick@softplc.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-02ARM: 5687/1: fix an oops with highmemNicolas Pitre
In xdr_partial_copy_from_skb() there is that sequence: kaddr = kmap_atomic(*ppage, KM_SKB_SUNRPC_DATA); [...] flush_dcache_page(*ppage); kunmap_atomic(kaddr, KM_SKB_SUNRPC_DATA); Mixing flush_dcache_page() and kmap_atomic() is a bit odd, especially since kunmap_atomic() must deal with cache issues already. OTOH the non-highmem case must use flush_dcache_page() as kunmap_atomic() becomes a no op with no cache maintenance. Problem is that with highmem the implementation of kmap_atomic() doesn't set page->virtual, and page_address(page) returns 0 in that case. Here flush_dcache_page() calls __flush_dcache_page() which calls __cpuc_flush_dcache_page(page_address(page)) resulting in a kernel oops. None of the kmap_atomic() implementations uses set_page_address(). Hence we can assume page_address() is always expected to return 0 in that case. Let's conditionally call __cpuc_flush_dcache_page() only when the page address is non zero, and perform that test only when highmem is configured. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-02ARM: 5684/1: Add nuc960 platform to w90x900wanzongshun
Add nuc960 platform to w90x900. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-02ARM: 5683/1: Add nuc950 platform to w90x900wanzongshun
Add nuc950 platform to w90x900. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-02ARM: 5682/1: Add cpu.c and dev.c and modify some files of w90p910 platformwanzongshun
Add the cpu.c and dev.c and modify w90p910 platform to apply to use the common API(provided by cpu.c and dev.c) at the same time, I renamed all w90x900 to nuc900 in every c file of w90x900 platform and touchscreen's driver name. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-02ARM: 5626/1: add suspend/resume functions to amba-pl011 serial driverLeo Chen
Add suspend/resume functions to the AMBA pl011 serial driver. Signed-off-by: Leo Chen <leochen@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-02ARM: 5625/1: fix hard coded 4K resource size in amba bus detectionLeo Chen
This patch modifies the amba bus detection logic in the kernel to detect the AMBA devices using the calculated resource size information rather than the hard coded 4K size. It also calculates the resource size when request mem region and release mem region. Signed-off-by: Leo Chen <leochen@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-02MMC: MMCI: convert realview MMC to use gpiolibRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-02ARM: 5685/1: Make MMCI driver compile without gpiolibLinus Walleij
The recent addition of optional gpiolib support to check if a card was inserted or write protected was really not optional. It needs this ifdef to become optional so that U300 compiles, for example. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-31autofs4 - fix missed case when changing to use struct pathIan Kent
In the recent change by Al Viro that changes verious subsystems to use "struct path" one case was missed in the autofs4 module which causes mounts to no longer expire. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-31Merge branch 'fix/hda' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix MacBookPro 3,1/4,1 quirk with ALC889A ALSA: hda - Add missing mux check for VT1708
2009-08-31Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (12564a): MAINTAINERS: Update gspca sn9c20x name style V4L/DVB (12502): gspca - sn9c20x: Fix gscpa sn9c20x build errors. V4L/DVB (12495): em28xx: Don't call em28xx_ir_init when disable_ir is true V4L/DVB (12457): zr364: wrong indexes V4L/DVB (12451): Update KConfig File to enable SDIO and USB interfaces V4L/DVB (12450): Siano: Fixed SDIO compilation bugs V4L/DVB (12449): adds webcam for Micron device MT9M111 0x143A to em28xx V4L/DVB (12446): sms1xxx: restore GPIO functionality for all Hauppauge devices
2009-08-31lmb: Also remove __init from lmb_end_of_RAM() declaration in lmb.hBenjamin Herrenschmidt
My previous patch (commit 4f8ee2c9cc: "lmb: Remove __init from lmb_end_of_DRAM()") removed __init in lmb.c but missed the fact that it was also marked as such in the .h Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-31ata_piix: parallel scanning on PATA needs an extra lockingBartlomiej Zolnierkiewicz
Commit log for commit 517d3cc15b36392e518abab6bacbb72089658313 ("[libata] ata_piix: Enable parallel scan") says: This patch turns on parallel scanning for the ata_piix driver. This driver is used on most netbooks (no AHCI for cheap storage it seems). The scan is the dominating time factor in the kernel boot for these devices; with this flag it gets cut in half for the device I used for testing (eeepc). Alan took a look at the driver source and concluded that it ought to be safe to do for this driver. Alan has also checked with the hardware team. and it is all true but once we put all things together additional constraints for PATA controllers show up (some hardware registers have per-host not per-port atomicity) and we risk misprogramming the controller. I used the following test to check whether the issue is real: @@ -736,8 +736,20 @@ static void piix_set_piomode(struct ata_ (timings[pio][1] << 8); } pci_write_config_word(dev, master_port, master_data); - if (is_slave) + if (is_slave) { + if (ap->port_no == 0) { + u8 tmp = slave_data; + + while (slave_data == tmp) { + pci_read_config_byte(dev, slave_port, &tmp); + msleep(50); + } + + dev_printk(KERN_ERR, &dev->dev, "PATA parallel scan " + "race detected\n"); + } pci_write_config_byte(dev, slave_port, slave_data); + } /* Ensure the UDMA bit is off - it will be turned back on if UDMA is selected */ and it indeed triggered the error message. Lets fix all such races by adding an extra locking to ->set_piomode and ->set_dmamode methods for PATA controllers. [ Alan: would be better to take the host lock in libata-core for these cases so that we fix all the adapters in one swoop. "Looks fine as a temproary quickfix tho" ] Cc: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Cc: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Improve CRTDDC mapping by using VBT info drm/i915: Fix CPU-spinning hangs related to fence usage by using an LRU. drm/i915: Set crtc/clone mask in different output devices drm/i915: Always use SDVO_B detect bit for SDVO output detection. drm/i915: Fix typo that broke SVID1 in intel_sdvo_multifunc_encoder() drm/i915: Check if BIOS enabled dual-channel LVDS on 8xx, not only on 9xx drm/i915: Set the multiplier for SDVO on G33 platform
2009-08-31ALSA: hda - Fix MacBookPro 3,1/4,1 quirk with ALC889ATakashi Iwai
This patch fixes the wrong headphone output routing for MacBookPro 3,1/4,1 quirk with ALC889A codec, which caused the silent headphone output. Also, this gives the individual Headphone and Speaker volume controls. Reference: kernel bug#14078 http://bugzilla.kernel.org/show_bug.cgi?id=14078 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2009-08-31ALSA: hda - Add missing mux check for VT1708Takashi Iwai
In patch_vt1708(), the check of MUX nids is missing and this results in the -EINVAL error in accessing Input Source mixer element. Simpliy adding the call of get_mux_nids() fixes the problem. Reference: Novell bnc#534904 https://bugzilla.novell.com/show_bug.cgi?id=534904 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-31V4L/DVB (12564a): MAINTAINERS: Update gspca sn9c20x name styleJoe Perches
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12502): gspca - sn9c20x: Fix gscpa sn9c20x build errors.Randy Dunlap
Reported-by: Toralf Forster <toralf.foerster@gmx.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12495): em28xx: Don't call em28xx_ir_init when disable_ir is trueShine Liu
We should call em28xx_ir_init(dev) only when disable_ir is true. Signed-off-by: Shine Liu <shinel@foxmail.com> Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12457): zr364: wrong indexesRoel Kluin
The order of indexes is reversed Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12451): Update KConfig File to enable SDIO and USB interfacesUdi Atar
Update KConfig file to enbale selection of SDIO and USB interfaces, and add dependancy on relevant modules. [mchehab@redhat.com: fix merge conflicts, remove default: m, add missing endmenu] Signed-off-by: Udi Atar <udia@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12450): Siano: Fixed SDIO compilation bugsUdi Atar
Fixed SDIO compilation bugs Also fixed a memory overrun issue in buffer management. Signed-off-by: Udi Atar <udia@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12449): adds webcam for Micron device MT9M111 0x143A to em28xxMauro Carvalho Chehab
[mchehab@redhat.com: fix merge conflict and a few CodingStyle issues] Signed-off-by: Steve Gotthardt <gotthardt@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12446): sms1xxx: restore GPIO functionality for all Hauppauge devicesMichael Krufky
Previous changesets broke Hauppauge devices and their GPIO configurations. This changeset restores the LED & LNA functionality. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-29drm/i915: Improve CRTDDC mapping by using VBT infoDavid Müller (ELSOFT AG)
Use VBT information to determine which DDC bus to use for CRTDCC. Fall back to GPIOA if VBT info is not available. Signed-off-by: David Müller <d.mueller@elsoft.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Tested on: 855 (David), and 945GM, 965GM, GM45, and G45 (anholt)
2009-08-29drm/i915: Fix CPU-spinning hangs related to fence usage by using an LRU.Eric Anholt
The lack of a proper LRU was partially worked around by taking the fence from the object containing the oldest seqno. But if there are multiple objects inactive, then they don't have seqnos and the first fence reg among them would be chosen. If you were trying to copy data between two mappings, this could result in each page fault stealing the fence from the other argument, and your application hanging. https://bugs.freedesktop.org/show_bug.cgi?id=23566 https://bugs.freedesktop.org/show_bug.cgi?id=23220 https://bugs.freedesktop.org/show_bug.cgi?id=23253 https://bugs.freedesktop.org/show_bug.cgi?id=23366 Cc: Stable Team <stable@kernel.org> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2009-08-28Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: don't free non-existent backlight in acpi video module toshiba_acpi: return on a fail path ACPICA: Windows compatibility fix: same buffer/string store
2009-08-28Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notifyLinus Torvalds
* 'for-linus' of git://git.infradead.org/users/eparis/notify: inotify: update the group mask on mark addition inotify: fix length reporting and size checking inotify: do not send a block of zeros when no pathname is available
2009-08-28parisc: fix warning in traps.cGrant Grundler
On Tue, Aug 18, 2009 at 01:45:17PM -0400, John David Anglin wrote: > CC arch/parisc/kernel/traps.o > arch/parisc/kernel/traps.c: In function 'handle_interruption': > arch/parisc/kernel/traps.c:535:18: warning: operation on 'regs->iasq[0]' > may be undefined Yes - Line 535 should use both [0] and [1]. Reported-by: John David Anglin <dave@hiauly1.hia.nrc.ca> Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-28SUNRPC: Fix rpc_task_force_reencodeTrond Myklebust
This patch fixes the bug that was reported in http://bugzilla.kernel.org/show_bug.cgi?id=14053 If we're in the case where we need to force a reencode and then resend of the RPC request, due to xprt_transmit failing with a networking error, then we _must_ retransmit the entire request. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-28modules: Fix build error in the !CONFIG_KALLSYMS caseIngo Molnar
> James Bottomley (1): > module: workaround duplicate section names -tip testing found that this patch breaks the build on x86 if CONFIG_KALLSYMS is disabled: kernel/module.c: In function ‘load_module’: kernel/module.c:2367: error: ‘struct module’ has no member named ‘sect_attrs’ distcc[8269] ERROR: compile kernel/module.c on ph/32 failed make[1]: *** [kernel/module.o] Error 1 make: *** [kernel] Error 2 make: *** Waiting for unfinished jobs.... Commit 1b364bf misses the fact that section attributes are only built and dealt with if kallsyms is enabled. The patch below fixes this. ( note, technically speaking this should depend on CONFIG_SYSFS as well but this patch is correct too and keeps the #ifdef less intrusive - in the KALLSYMS && !SYSFS case the code is a NOP. ) Signed-off-by: Ingo Molnar <mingo@elte.hu> [ Replaced patch with a slightly cleaner variation by James Bottomley ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-28Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix vSMP boot crash x86, xen: Initialize cx to suppress warning x86, xen: Suppress WP test on Xen
2009-08-28ACPI: don't free non-existent backlight in acpi video moduleKeith Packard
acpi_video_put_one_device was attempting to remove sysfs entries and unregister a backlight device without first checking that said backlight device structure had been created. Signed-off-by: Keith Packard <keithp@keithp.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28toshiba_acpi: return on a fail pathJiri Slaby
Return from bt_rfkill_poll() when hci_get_radio_state() fails. value is invalid in that case and should not be assigned to the rfkill state. This also fixes a double unlock bug. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>