| Age | Commit message (Collapse) | Author |
|---|
|
This code expects to run in softirq context, and bare hrtimers
run in hw IRQ context.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Modify loops in such way that the register value is checked also after
the timeout condition, just in case the heavy interrupt load etc. caused
the thread to sleep for the time period exceeding the timeout value.
While at it remove an extra ALI_STIMER read from snd_ali_stimer_ready().
Reported-by: Jack Byer <ojbyer@usa.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
setup_arch() unconditionally sets the preferred console to ttyS.
This breaks the use of 3270 devices as the console. Provide a new
function to set the default preferred console for s390. The preferred
console depends on the conmode parameter that is used to switch
between 3270 and 3215 terminal/console mode.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
If the NULL test on block is needed, it should be before the dereference of
the base field.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
expression E1,E2;
identifier fld;
statement S1,S2;
@@
E1 = E2->fld;
(
if (E1 == NULL) S1 else S2
|
*if (E2 == NULL) S1 else S2
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
If io_subchannel_initialize_dev fails it will release the only
reference to the ccw device therefore the caller should not
kfree this device since this is done in the release function.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
It was mixing up TTM placement values and flags.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
None of this stuff should execute in hw IRQ context, therefore
use a tasklet_hrtimer so that it runs in softirq context.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: check saved state before restore
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] mpt2sas: fix config request and diag reset deadlock
[SCSI] mpt2sas: Bump driver version 01.100.04.00
[SCSI] mpt2sas: fix oops because drv data points to NULL on resume from hibernate
[SCSI] mpt2sas: fix crash due to Watchdog is active while OS in standby mode
[SCSI] mpt2sas: fix infinite loop inside config request
[SCSI] mpt2sas: Excessive log info causes sas iounit page time out
[SCSI] mpt2sas: Raid 10 Value is showing as Raid 1E in /va/log/messages
[SCSI] mpt2sas: Expander fix oops saying "Already part of another port"
[SCSI] mpt2sas: Introduced check for enclosure_handle to avoid crash
|
|
|
|
In commit a8e7d49aa7be728c4ae241a75a2a124cdcabc0c5 ("Fix race in
create_empty_buffers() vs __set_page_dirty_buffers()"), I removed a test
for a NULL page mapping unintentionally when some of the code inside
__set_page_dirty() was moved to the callers.
That removal generally didn't matter, since a filesystem would serialize
truncation (which clears the page mapping) against writing (which marks
the buffer dirty), so locking at a higher level (either per-page or an
inode at a time) should mean that the buffer page would be stable. And
indeed, nothing bad seemed to happen.
Except it turns out that apparently reiserfs does something odd when
under load and writing out the journal, and we have a number of bugzilla
entries that look similar:
http://bugzilla.kernel.org/show_bug.cgi?id=13556
http://bugzilla.kernel.org/show_bug.cgi?id=13756
http://bugzilla.kernel.org/show_bug.cgi?id=13876
and it looks like reiserfs depended on that check (the common theme
seems to be "data=journal", and a journal writeback during a truncate).
I suspect reiserfs should have some additional locking, but in the
meantime this should get us back to the pre-2.6.29 behavior.
Pattern-pointed-out-by: Roland Kletzing <devzero@web.de>
Cc: stable@kernel.org (2.6.29 and 2.6.30)
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon: add GET_PARAM/INFO support for Z pipes
drm/radeon/kms: add r100/r200 OQ support.
drm: Fix sysfs device confusion.
drm/radeon/kms: implement the bo busy ioctl properly.
|
|
* 'btrfs' of git://git.kernel.dk/linux-2.6-block:
btrfs: fix inode rbtree corruption
|
|
As noted in 83d349f35e1ae72268c5104dbf9ab2ae635425d4 ("x86: don't send
an IPI to the empty set of CPU's"), some APIC's will be very unhappy
with an empty destination mask. That commit added a WARN_ON() for that
case, and avoided the resulting problem, but didn't fix the underlying
reason for why those empty mask cases happened.
This fixes that, by checking the result of 'cpumask_andnot()' of the
current CPU actually has any other CPU's left in the set of CPU's to be
sent a TLB flush, and not calling down to the IPI code if the mask is
empty.
The reason this started happening at all is that we started passing just
the CPU mask pointers around in commit 4595f9620 ("x86: change
flush_tlb_others to take a const struct cpumask"), and when we did that,
the cpumask was no longer thread-local.
Before that commit, flush_tlb_mm() used to create it's own copy of
'mm->cpu_vm_mask' and pass that copy down to the low-level flush
routines after having tested that it was not empty. But after changing
it to just pass down the CPU mask pointer, the lower level TLB flush
routines would now get a pointer to that 'mm->cpu_vm_mask', and that
could still change - and become empty - after the test due to other
CPU's having flushed their own TLB's.
See
http://bugzilla.kernel.org/show_bug.cgi?id=13933
for details.
Tested-by: Thomas Björnell <thomas.bjornell@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
RTL8187B always needs MSR_LINK_ENEDCA flag to be set even when it is in
no link mode, otherwise it'll not be able to associate when this flag is
not set after the change "mac80211: fix managed mode BSSID handling".
By accident, setting BSSID of AP before association makes 8187B to
successfuly associate even when ENEDCA flag isn't set, which was the
case before the mac80211 change. But now the BSSID of AP we are trying
to associate is only available after association is successful, and
any attempt to associate without the needed flag doesn't work.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
When 'and'ing two bitmasks (where 'andnot' is a variation on it), some
cases want to know whether the result is the empty set or not. In
particular, the TLB IPI sending code wants to do cpumask operations and
determine if there are any CPU's left in the final set.
So this just makes the bitmask (and cpumask) functions return a boolean
for whether the result has any bits set.
Cc: stable@kernel.org (2.6.30, needed by TLB shootdown fix)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The default_send_IPI_mask_logical() function uses the "flat" APIC mode
to send an IPI to a set of CPU's at once, but if that set happens to be
empty, some older local APIC's will apparently be rather unhappy. So
just warn if a caller gives us an empty mask, and ignore it.
This fixes a regression in 2.6.30.x, due to commit 4595f9620 ("x86:
change flush_tlb_others to take a const struct cpumask"), documented
here:
http://bugzilla.kernel.org/show_bug.cgi?id=13933
which causes a silent lock-up. It only seems to happen on PPro, P2, P3
and Athlon XP cores. Most developers sadly (or not so sadly, if you're
a developer..) have more modern CPU's. Also, on x86-64 we don't use the
flat APIC mode, so it would never trigger there even if the APIC didn't
like sending an empty IPI mask.
Reported-by: Pavel Vilim <wylda@volny.cz>
Reported-and-tested-by: Thomas Björnell <thomas.bjornell@gmail.com>
Reported-and-tested-by: Martin Rogge <marogge@onlinehome.de>
Cc: Mike Travis <travis@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When you iterate a list, using the iterator is useful.
Before:
ID: 5
ID: 5
ID: 5
ID: 5
EVNT: 0x40088b scale: nan ID: 5 CNT: 1006252 ID: 6 CNT: 1011090 ID: 7 CNT: 1011196 ID: 8 CNT: 1011095
EVNT: 0x40088c scale: 1.000000 ID: 5 CNT: 2003065 ID: 6 CNT: 2011671 ID: 7 CNT: 2012620 ID: 8 CNT: 2013479
EVNT: 0x40088c scale: 1.000000 ID: 5 CNT: 3002390 ID: 6 CNT: 3015996 ID: 7 CNT: 3018019 ID: 8 CNT: 3020006
EVNT: 0x40088b scale: 1.000000 ID: 5 CNT: 4002406 ID: 6 CNT: 4021120 ID: 7 CNT: 4024241 ID: 8 CNT: 4027059
After:
ID: 1
ID: 2
ID: 3
ID: 4
EVNT: 0x400889 scale: nan ID: 1 CNT: 1005270 ID: 2 CNT: 1009833 ID: 3 CNT: 1010065 ID: 4 CNT: 1010088
EVNT: 0x400898 scale: nan ID: 1 CNT: 2001531 ID: 2 CNT: 2022309 ID: 3 CNT: 2022470 ID: 4 CNT: 2022627
EVNT: 0x400888 scale: 0.489467 ID: 1 CNT: 3001261 ID: 2 CNT: 3027088 ID: 3 CNT: 3027941 ID: 4 CNT: 3028762
Reported-by: stephane eranian <eranian@googlemail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey J Ashford <cjashfor@us.ibm.com>
Cc: perfmon2-devel <perfmon2-devel@lists.sourceforge.net>
LKML-Reference: <1250867976.7538.73.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
One of my testboxes triggered this nasty stack overflow crash
during SCSI probing:
[ 5.874004] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.875004] device: 'sda': device_add
[ 5.878004] BUG: unable to handle kernel NULL pointer dereference at 00000a0c
[ 5.878004] IP: [<b1008321>] print_context_stack+0x81/0x110
[ 5.878004] *pde = 00000000
[ 5.878004] Thread overran stack, or stack corrupted
[ 5.878004] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 5.878004] last sysfs file:
[ 5.878004]
[ 5.878004] Pid: 1, comm: swapper Not tainted (2.6.31-rc6-tip-01272-g9919e28-dirty #5685)
[ 5.878004] EIP: 0060:[<b1008321>] EFLAGS: 00010083 CPU: 0
[ 5.878004] EIP is at print_context_stack+0x81/0x110
[ 5.878004] EAX: cf8a3000 EBX: cf8a3fe4 ECX: 00000049 EDX: 00000000
[ 5.878004] ESI: b1cfce84 EDI: 00000000 EBP: cf8a3018 ESP: cf8a2ff4
[ 5.878004] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 5.878004] Process swapper (pid: 1, ti=cf8a2000 task=cf8a8000 task.ti=cf8a3000)
[ 5.878004] Stack:
[ 5.878004] b1004867 fffff000 cf8a3ffc
[ 5.878004] Call Trace:
[ 5.878004] [<b1004867>] ? kernel_thread_helper+0x7/0x10
[ 5.878004] BUG: unable to handle kernel NULL pointer dereference at 00000a0c
[ 5.878004] IP: [<b1008321>] print_context_stack+0x81/0x110
[ 5.878004] *pde = 00000000
[ 5.878004] Thread overran stack, or stack corrupted
[ 5.878004] Oops: 0000 [#2] PREEMPT SMP DEBUG_PAGEALLOC
The oops did not reveal any more details about the real stack
that we have and the system got into an infinite loop of
recursive pagefaults.
So i booted with CONFIG_STACK_TRACER=y and the 'stacktrace' boot
parameter. The box did not crash (timings/conditions probably
changed a tiny bit to trigger the catastrophic crash), but the
/debug/tracing/stack_trace file was rather revealing:
Depth Size Location (72 entries)
----- ---- --------
0) 3704 52 __change_page_attr+0xb8/0x290
1) 3652 24 __change_page_attr_set_clr+0x43/0x90
2) 3628 60 kernel_map_pages+0x108/0x120
3) 3568 40 prep_new_page+0x7d/0x130
4) 3528 84 get_page_from_freelist+0x106/0x420
5) 3444 116 __alloc_pages_nodemask+0xd7/0x550
6) 3328 36 allocate_slab+0xb1/0x100
7) 3292 36 new_slab+0x1c/0x160
8) 3256 36 __slab_alloc+0x133/0x2b0
9) 3220 4 kmem_cache_alloc+0x1bb/0x1d0
10) 3216 108 create_object+0x28/0x250
11) 3108 40 kmemleak_alloc+0x81/0xc0
12) 3068 24 kmem_cache_alloc+0x162/0x1d0
13) 3044 52 scsi_pool_alloc_command+0x29/0x70
14) 2992 20 scsi_host_alloc_command+0x22/0x70
15) 2972 24 __scsi_get_command+0x1b/0x90
16) 2948 28 scsi_get_command+0x35/0x90
17) 2920 24 scsi_setup_blk_pc_cmnd+0xd4/0x100
18) 2896 128 sd_prep_fn+0x332/0xa70
19) 2768 36 blk_peek_request+0xe7/0x1d0
20) 2732 56 scsi_request_fn+0x54/0x520
21) 2676 12 __generic_unplug_device+0x2b/0x40
22) 2664 24 blk_execute_rq_nowait+0x59/0x80
23) 2640 172 blk_execute_rq+0x6b/0xb0
24) 2468 32 scsi_execute+0xe0/0x140
25) 2436 64 scsi_execute_req+0x152/0x160
26) 2372 60 scsi_vpd_inquiry+0x6c/0x90
27) 2312 44 scsi_get_vpd_page+0x112/0x160
28) 2268 52 sd_revalidate_disk+0x1df/0x320
29) 2216 92 rescan_partitions+0x98/0x330
30) 2124 52 __blkdev_get+0x309/0x350
31) 2072 8 blkdev_get+0xf/0x20
32) 2064 44 register_disk+0xff/0x120
33) 2020 36 add_disk+0x6e/0xb0
34) 1984 44 sd_probe_async+0xfb/0x1d0
35) 1940 44 __async_schedule+0xf4/0x1b0
36) 1896 8 async_schedule+0x12/0x20
37) 1888 60 sd_probe+0x305/0x360
38) 1828 44 really_probe+0x63/0x170
39) 1784 36 driver_probe_device+0x5d/0x60
40) 1748 16 __device_attach+0x49/0x50
41) 1732 32 bus_for_each_drv+0x5b/0x80
42) 1700 24 device_attach+0x6b/0x70
43) 1676 16 bus_attach_device+0x47/0x60
44) 1660 76 device_add+0x33d/0x400
45) 1584 52 scsi_sysfs_add_sdev+0x6a/0x2c0
46) 1532 108 scsi_add_lun+0x44b/0x460
47) 1424 116 scsi_probe_and_add_lun+0x182/0x4e0
48) 1308 36 __scsi_add_device+0xd9/0xe0
49) 1272 44 ata_scsi_scan_host+0x10b/0x190
50) 1228 24 async_port_probe+0x96/0xd0
51) 1204 44 __async_schedule+0xf4/0x1b0
52) 1160 8 async_schedule+0x12/0x20
53) 1152 48 ata_host_register+0x171/0x1d0
54) 1104 60 ata_pci_sff_activate_host+0xf3/0x230
55) 1044 44 ata_pci_sff_init_one+0xea/0x100
56) 1000 48 amd_init_one+0xb2/0x190
57) 952 8 local_pci_probe+0x13/0x20
58) 944 32 pci_device_probe+0x68/0x90
59) 912 44 really_probe+0x63/0x170
60) 868 36 driver_probe_device+0x5d/0x60
61) 832 20 __driver_attach+0x89/0xa0
62) 812 32 bus_for_each_dev+0x5b/0x80
63) 780 12 driver_attach+0x1e/0x20
64) 768 72 bus_add_driver+0x14b/0x2d0
65) 696 36 driver_register+0x6e/0x150
66) 660 20 __pci_register_driver+0x53/0xc0
67) 640 8 amd_init+0x14/0x16
68) 632 572 do_one_initcall+0x2b/0x1d0
69) 60 12 do_basic_setup+0x56/0x6a
70) 48 20 kernel_init+0x84/0xce
71) 28 28 kernel_thread_helper+0x7/0x10
There's a lot of fat functions on that stack trace, but
the largest of all is do_one_initcall(). This is due to
the boot trace entry variables being on the stack.
Fixing this is relatively easy, initcalls are fundamentally
serialized, so we can move the local variables to file scope.
Note that this large stack footprint was present for a
couple of months already - what pushed my system over
the edge was the addition of kmemleak to the call-chain:
6) 3328 36 allocate_slab+0xb1/0x100
7) 3292 36 new_slab+0x1c/0x160
8) 3256 36 __slab_alloc+0x133/0x2b0
9) 3220 4 kmem_cache_alloc+0x1bb/0x1d0
10) 3216 108 create_object+0x28/0x250
11) 3108 40 kmemleak_alloc+0x81/0xc0
12) 3068 24 kmem_cache_alloc+0x162/0x1d0
13) 3044 52 scsi_pool_alloc_command+0x29/0x70
This pushes the total to ~3800 bytes, only a tiny bit
more was needed to corrupt the on-kernel-stack thread_info.
The fix reduces the stack footprint from 572 bytes
to 28 bytes.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Needed for occlusion queries on rv530 chips.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Node may not be inserted over existing node. This causes inode tree
corruption and I was seeing crashes in inode_tree_del which I can not
reproduce after this patch.
The other way to fix this would be to tie inode lifetime in the rbtree
with inode while not in freeing state. I had a look at this but it is
not so trivial at this point. At least this patch gets things working again.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Chris Mason <chris.mason@oracle.com>
Acked-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
While it's debatable whether or not a NULL device argument to
the DMA API functions is valid... since it certainly isn't
valid on devices with an IOMMU... dma-debug really shouldn't be
dereferencing null pointers either.
Guard against that in err_printk and the driver_filter
functions. A Fedora rawhide user was seeing this in one of the
dvb drivers resulting in an oops on boot.
[ A patch has been sent for testing to the driver, but I feel
the dma debugging support should be fixed as well. (There's
still a pile of legacy garbage in the kernel passing null
pointers to dma_{alloc,free}_*. :( ]
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Cc: mchehab@infradead.org
Cc: Joerg Roedel <joerg.roedel@amd.com>
LKML-Reference: <20090820011708.GP25206@bombadil.infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Sometimes, when using the touchscreen, it stops working till next restart
and the following message is printed:
ucb1400: unexpected IE_STATUS = 0x0
The following patch retriggers the touchscreen interrupt unconditionally.
This prevents hanging of the touchscreen in case of bogus interrupt
occurence.
Signed-off-by: Pavel Revak <palo@bielyvlk.sk>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|
|
This patch enables ADC filtering on UCB1400 codec by default. The
benefit from this change is mostly on some Colibri boards where
the ADCSYNC pin of the UCB1400 codec isn't connected causing the
touchscreen to jitter very badly. This change has no visible
effect on boards where the ADCSYNC pin is connected.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Tested-by: Palo Revak <palo@bielyvlk.sk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|
|
Tested-by: Martin Capitanio <martin@capitanio.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|
|
In case a downconvert is queued, and a flock receives a signal,
BUG_ON(lockres->l_action != OCFS2_AST_INVALID) is triggered
because a lock cancel triggers a dlmunlock while an AST is
scheduled.
To avoid this, allow a LKM_CANCEL to pass through, and let it
wait on __dlm_wait_on_lockres().
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Acked-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
This adds the relocation necessary for OQ support on the r100/r200
chipsets.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The drm sysfs class suspend / resume methods could not distinguish
between different device types wich could lead to illegal type casts.
Use struct device_type and make sure the class suspend / resume callbacks
are aware of those. There is no per device-type suspend / resume. Only
new-style PM.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The previous patch assumes the ioctl already existed, when
it actually didn't.
It also didn't return the correct error code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
There is missing name for NFSSync cluster lock. This makes lockdep unhappy
because we end up passing NULL to lockdep when initializing lock key. Fix it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
The absence of vmlinux.lds here keeps .vmlinux.lds.cmd from being
included, which in turn leads to it and all its dependents always
getting rebuilt independent of whether they are already up-to-date.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4A8D84670200007800010D31@vpn.id2.novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
* 'i2c-fixes-rc6' of git://aeryn.fluff.org.uk/bjdooks/linux:
i2c-stu300: I2C STU300 stability updates
i2c-omap: Enable workaround for Errata 1.153 based on
i2c-omap: ACK pending [R/X]DR and [R/X]RDY interrupts
i2c-omap: Fix I2C status ACK
|
|
- blk clk is enabled when an irq arrives. The clk should be enabled,
but just to make sure.
- All error bits are handled no matter state machine state
- All irq's will run complete() except for irq's that wasn't an event.
- No more looking into status registers just in case an interrupt
has happend and the irq handle wasn't executed.
- irq_disable/enable are now separete functions.
- clk settings calculation changed to round upwards instead of
downwards.
- Number of address send attempts before giving up is increased to 12
from 10 since it most times take 8 tries before getting through.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Silicon Errata 1.153 has been fixed on OMAP 3630|4430 with the use of a later
version of I2C IP block.
The errata impacts OMAP 2420|2430|3430, enable the workaround for these based
on I2C IP block revision number instead of OMAP CPU type
Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
ACK any pending read/write interrupts before exiting the ISR either after
completing the operation [ARDY interrupt] or in case of an error
[NACK|AL interrupt]
Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
I2C status ack for [RX]RDR and [RX]RDY could
cause race conditions of clearing the event
twice and a violation of the programing
sequence as defined in TRM This patch fixes
the same.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda - Fix probe of Toshiba laptops with ALC268 codec
ALSA: hda: add model for Intel DG45ID/DG45FC boards
ALSA: hda: enable speaker output for Compaq 6530s/6531s
|
|
Without the check, the config space may be filled with zeros. Though
the driver should try to avoid call restoring before saving, but the
pci layer also should check this.
Also removes the existing check in pci_restore_standard_config, since
it's superfluous with the new check in restore_state.
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen into x86/urgent
|
|
When ibm_newemac netdev instance is shutdown with "ifconfig down",
the netdev interface does not go properly down. netif_carrier_ok()
keeps returning TRUE even after "ifconfig down".
The problem can be seen when ibm_newemac instances are slaves of
a bonding interface. The bonding interface code uses netif_carrier_ok()
to determine the link status of its slaves. When ibm_newemac slave is
shutdown with "ifconfig down", the bonding interface won't detect any
link status change because netif_carrier_ok() keeps returning TRUE.
Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reported-by: cemede@gmail.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|
|
Make sure the stack-protector segment registers are properly set up
before calling any functions which may have stack-protection compiled
into them.
[ Impact: prevent Xen early-boot crash when stack-protector is enabled ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
|
|
load_percpu_segment() is used to set up the per-cpu segment registers,
which are also used for -fstack-protector. Make sure that the
load_percpu_segment() function doesn't have stackprotector enabled.
[ Impact: allow percpu setup before calling stack-protected functions ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
|
|
Fix build errors due to missing Kconfig select of CRC32:
ks8851.c:(.text+0x7d2ee): undefined reference to `crc32_le'
ks8851.c:(.text+0x7d2f5): undefined reference to `bitrev32'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are many variants of Toshiba laptops with ALC268 codec, and
it seems that a few of them don't work with model=toshiba preset
since they have the secondary ALC268 codec just for HDMI output.
This is a regression due to the previous clean-up work to merge all
Toshiba quirk entries into a single check.
This patch adds the identification of such laptops to apply the
standard BIOS-probing method. Unfortunately, Toshiba laptops have
all the same PCI SSID, so we need to check the codec SSID to identify
each device.
Tested-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
nilfs2: fix oopses with doubly mounted snapshots
nilfs2: missing a read lock for segment writer in nilfs_attach_checkpoint()
|
|
Fix some issues with the AFS documentation, found when testing AFS on ppc64:
- Update AFS features: reading/writing, local caching
- Typo in kafs sysfs debug file
- Use modprobe instead of insmod in example
- Update IPs for grand.central.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/kms: teardown crtc correctly when fb is destroyed.
drm/kms/radeon: cleanup combios TV table like DDX.
drm/radeon/kms: memset the allocated framebuffer before using it.
drm/radeon/kms: although LVDS might be possible on crtc 1 don't do it.
drm/radeon/kms: implement bo busy check + current domain
drm/radeon/kms: cut down indirects in register accesses.
drm/radeon/kms: Fix up vertical blank interrupt support.
drm/radeon/kms: add rv530 R300_SU_REG_DEST + reloc for ZPASS_ADDR
drm/edid: fixup detailed timings like the X server.
drm/radeon/kms: Add specific rs690 authorized register table
|
|
* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Update Microblaze defconfigs
microblaze: Use klimit instead of _end for memory init
microblaze: Enable ppoll syscall
microblaze: Sane handling of missing timer/intc in device tree
microblaze: use the generic ack_bad_irq implementation
|
