aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-04-24[ALSA] sound: fix platform driver hotplug/coldplugKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable sound platform drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda: EAPD power managementMatthew Ranostay
Power management support for EAPD enabled laptops, when headphones are sensed it pulls the EAPD GPIO line low to power it down. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda: Correct SPDIF out default configMatthew Ranostay
Several laptops have have the SPDIF out defined as 'Digital other out' when it should be 'SPDIF out' in the default config. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda - Fujitsu Lifebook PC speaker signalTony Vroon
The legacy PC speaker signal was not routed to outputs. The codec is not prevented from powering down in this patch, although I suppose one could argue that perhaps it should be. Let me know if anyone feels strongly one way or the other. Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda - PCI quirk for laptop LG which use CMI9880Jiang zhe
Please refer to [0003874] on the alsa mantis. This patch added the pci quirk. Signed-off-by: Jiang zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda - Should use HDA_OUTPUT instead of HDA_INPUT to mute pin 15 of ALC880Jiang zhe
To mute the output of Pin widget 15 in ALC880, we should use the HDA_OUTPUT. However, current code looks like : snd_hda_codec_amp_stereo(codec, 0x15, HDA_INPUT, 0, HDA_AMP_MUTE, bits); It may be a misspelling. Signed-off-by: Jiang zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] sound/usb/usbaudio.c: coding stylePavel Machek
Putting space between ! and variable is a strange coding style, fix that, also make it fit into 80 columns where that is easy. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] usb audio: make quirk handling more readable, and fix commented-out codePavel Machek
usb audio contains useful debugging code, protected by #if 0. Unfortunately, it will not compile because variable names changed; fix it. Dallas workaround is formatted in a way where it is not quite obvious what is normal code and what is quirk. Reformat it to make it obvious. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] usb audio: Fix another Dallas quirkPavel Machek
Dallas USB speakers are buggy in more than one way. One of configs they offer does not work at all. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Fix unbalanced mutexFrederik Deweerdt
On Wed, Apr 02, 2008 at 08:19:29AM -0400, Miles Lane wrote: > [ 48.765906] [ BUG: bad unlock balance detected! ] > [ 48.765912] ------------------------------------- > [ 48.765918] pulseaudio/4277 is trying to release lock > (&codec->spdif_mutex) at: > [ 48.765930] [<c03031b7>] mutex_unlock+0x8/0xa > [ 48.765945] but there are no more locks to release! > [ 48.765950] > [ 48.765952] other info that might help us debug this: > [ 48.765959] 2 locks held by pulseaudio/4277: > [ 48.765965] #0: (&pcm->open_mutex){--..}, at: [<f89f134b>] > snd_pcm_open+0xc1/0x1ba [snd_pcm] > [ 48.766003] #1: (&chip->open_mutex){--..}, at: [<f8b4f13d>] > azx_pcm_open+0x36/0x184 [snd_hda_intel] > [ 48.766057] > [ 48.766059] stack backtrace: > [ 48.766066] Pid: 4277, comm: pulseaudio Not tainted 2.6.25-rc8-mm1 #12 > [ 48.766086] [<c013afc6>] print_unlock_inbalance_bug+0xce/0xd8 > [ 48.766107] [<c0109e1c>] ? save_stack_trace+0x1d/0x3b > [ 48.766130] [<c012f54e>] ? __kernel_text_address+0x1b/0x27 > [ 48.766146] [<c0104533>] ? dump_trace+0xcd/0xd9 > [ 48.766160] [<c0109d9e>] ? save_stack_address+0x0/0x2c > [ 48.766176] [<c013b80a>] ? find_usage_backwards+0xa4/0xc3 > [ 48.766193] [<c013cfb5>] lock_release_non_nested+0x84/0x120 > [ 48.766209] [<c03031b7>] ? mutex_unlock+0x8/0xa > [ 48.766222] [<c013d1bb>] lock_release+0x16a/0x199 > [ 48.766238] [<c0303137>] __mutex_unlock_slowpath+0xa9/0x121 > [ 48.766252] [<c03031b7>] mutex_unlock+0x8/0xa > [ 48.766263] [<f8b4ffd8>] snd_hda_multi_out_analog_open+0xd3/0xef > [snd_hda_intel] The following patch should fix it. Cc: "Miles Lane" <miles.lane@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] es1968 - fix coding style in the last patchAndrew Morton
WARNING: braces {} are not necessary for single statement blocks #40: FILE: sound/pci/es1968.c:1831: + if (diff > 1) { + __maestro_write(chip, IDR0_DATA_PORT, cp1); + } total: 0 errors, 1 warnings, 35 lines checked ./patches/es1968-fix-jitter-on-some-maestro-cards.patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Andreas Mueller <andreas@stapelspeicher.org> Tested-by: Rene Herman <rene.herman@keyaccess.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] es1968: fix jitter on some maestro cardsAndreas Mueller
This patch suppresses jitter on several Maestro cards in stereo mode (ALSA of course). The patch is also incorporated in the *BSD drivers where I "ported" it from. Without this patch most of the stereo audio gets out of sync and really distorted (oss-emulation with mplayer at 48000khz worked somehow). Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] sound/pci/rme9652/hdspm.c: stop inlining largish static functionsDenys Vlasenko
sound/pci/rme9652/hdspm.c has unusually large number of static inline functions - 22. I looked through them and some of them seem to be too big to warrant inlining. This patch removes "inline" from these static functions (regardless of number of callsites - gcc nowadays auto-inlines statics with one callsite). Size difference on 32bit x86: text data bss dec hex filename 20437 2160 516 23113 5a49 linux-2.6-ALLYES/sound/pci/rme9652/hdspm.o 18036 2160 516 20712 50e8 linux-2.6.inline-ALLYES/sound/pci/rme9652/hdspm.o [coding fix by Takashi Iwai <tiwai@suse.de>] Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] soc - Include register in DAPM debug outputMark Brown
When logging register changes in DAPM debug output include the register number. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - PCI quirk for MSI laptopJiang zhe
Please refer to [0003848] on the alsa mantis. This patch adds the pci quirk and Mic-Int controller. Signed-off-by: Jiang zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] virtuoso: initialize two-wire control registerClemens Ladisch
On the Xonar DX, initialize all bits of the two-wire control register. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] virtuoso: add GPIO 1 mixer controlClemens Ladisch
Add a mixer control for switching whatever it is that is connected to GPIO pin 1 on the Xonar DX. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: use SPDIF input only if presentClemens Ladisch
If the card model does not have a digital input or an AC97 codec, disable the respective interrupt and mixer controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] virtuoso: correctly switch input jack on Xonar DXClemens Ladisch
When selecting the capture source on the Xonar DX, the input jack must be routed to either the line input or the microphone input by setting a GPIO pin. This requires an additional callback so that the model driver can hook into the toggling of AC97 switches. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] virtuoso: add Xonar DX supportClemens Ladisch
Add support for the Asus Xonar DX. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] virtuoso: fix typoClemens Ladisch
Fix a (fortunately harmless) typo. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] virtuoso: change card short nameClemens Ladisch
Change the card short name to show to show the card name instead of the chip name. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] virtuoso: set PCM1796 oversampling rateClemens Ladisch
When playing data at 96 kHz or higher, reduce the DAC oversampling rate to 32. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] virtuoso: move some code to xonar_common_init()Clemens Ladisch
Move the code that is common to all Xonar models to a separate function, and make it more generic in preparation for another model. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] virtuoso: allow both CS5381 and CS5361Clemens Ladisch
Rename all CS5381 symbols to CS53x1 because they can also be used for Xonar models with a CS5361. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] virtuoso: separate D2/D2X init functionsClemens Ladisch
Use separate model structures for the D2 and D2X so that the init function does not have to check for the model again. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: add I2C supportClemens Ladisch
Add a function to write I2C registers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] aw2: remove duplicate MODULE_LICENSEClemens Ladisch
"GPL 2" does not mean that there have to be two MODULE_LICENSE("GPL") entries. ;-) Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] fix comments in sound/core.hPavel Machek
Two sentences seem to be spliced into one in comment, fix that and fix english. Also fix codingstyle. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: fix line-in recording selection (now for real)Clemens Ladisch
On C-Media cards, the GPIO pin 0 of the CM9780 must be handled exactly like on Xonar cards, so move the Xonar code to the common mixer code. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Support mic automute for Clevo M720R/SRHerton Ronaldo Krzesinski
Add support for mic automute in clevo-m720r ALC883 model, and rename it to more generic clevo-m720. Also change model entry in ALSA-Configuration.txt accordingly. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Map clevo-m720r ALC883 model for Clevo M720SRHerton Ronaldo Krzesinski
Map clevo-m720r ALC883 model for Clevo M720SR. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] pcsp: remove downsamplingStas Sergeev
pcsp: remove S16->U8 downsampling as dmix now supports U8 natively. Signed-off-by: Stas Sergeev <stsp@aknet.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] ymfpci - Fix race at removalTakashi Iwai
free_irq() must be called first to avoid races at removal. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Add missing models in ALSA-Configuration.txtTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Use common 3stack-6ch mixer for 3stack-hp modelHerton Ronaldo Krzesinski
Forgot one more: 3stack-hp model also have now the same mixer as 3stack-6ch (after DAC assignment fix in ALC883), so use it avoiding duplicating the same mixer definition. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Use base ALC883 mixer for 6stack-dell modelHerton Ronaldo Krzesinski
After DAC assignment fix in ALC883, alc888_6st_dell_mixer is now the same as alc883_base_mixer. Avoid duplicated code and use alc883_base_mixer in 6stack-dell model, removing alc888_6st_dell_mixer definition. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Remove now uneeded 6stack-hp model from ALC883Herton Ronaldo Krzesinski
After DAC assignment fix in ALC883, the 6stack-hp model is now the same as 6stack-dig. So just remove 6stack-hp model and replace its use with 6stack-dig. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - model for alc262 to support Lenovo 3000Jiang zhe
This model is to support the Lenovo 3000 y410. ALSA bug#3856: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3856 Signed-off-by: Jiang zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda: 92hd71bxxx DMIC nidMatthew Ranostay
Added missing DMIC verb to dell_4_1_pin_configs[]. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] ice1724 - Improved the Juli rate settingPavel Hofman
* moving most of clock-specific code to card-specific routines * support for ESI Juli * to-be-researched - monitoring of analog/digital inputs Signed-off-by: Pavel Hofman <dustin@seznam.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] sound/pci/pcxhr/pcxhr.c: fix warningsAndrew Morton
sparc64: sound/pci/pcxhr/pcxhr.c: In function `pcxhr_update_r_buffer': sound/pci/pcxhr/pcxhr.c:459: warning: cast to pointer from integer of different size sound/pci/pcxhr/pcxhr.c: In function `pcxhr_trigger_tasklet': sound/pci/pcxhr/pcxhr.c:628: warning: long int format, different type arg (arg 4) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] sound/pci/pcxhr/pcxhr_core.c: fix printk warningAndrew Morton
sound/pci/pcxhr/pcxhr_core.c: In function `pcxhr_set_pipe_state': sound/pci/pcxhr/pcxhr_core.c:899: warning: long int format, different type arg (arg 4) suseconds_t is int on sparc64. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] sound/pci/aw2/aw2-alsa.c needs dma-mapping.hAndrew Morton
sparc32: sound/pci/aw2/aw2-alsa.c: In function 'snd_aw2_create': sound/pci/aw2/aw2-alsa.c:282: error: 'DMA_32BIT_MASK' undeclared (first use in this function) sound/pci/aw2/aw2-alsa.c:282: error: (Each undeclared identifier is reported only once sound/pci/aw2/aw2-alsa.c:282: error: for each function it appears in.) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: disable clock of unused I2S inputsClemens Ladisch
Disable the master clock outputs of any unused I2S inputs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: move MIDI flag to model structClemens Ladisch
Put the flag that enables the MIDI port into the model structure instead of passing it as a separate parameter to oxygen_pci_probe(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: make SPI/2-wire configuration model-specificClemens Ladisch
Allow the model drivers to specify if the codec communication goes over SPI or a 2-wire bus. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: change model-specific PCM device configurationClemens Ladisch
When specifying which PCM devices to use, model drivers now use flags that also specify the routing between PCM devices and DMA channels instead of just DMA channel bits. This simplifies some code that checks for these flags. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: add monitor controlsClemens Ladisch
Add controls to enable monitoring of the analog and digital inputs. To allow monitoring after loading the driver when nothing has been played back or recorded yet, the I2S input and outputs are initialized to a valid configuration. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] virtuoso: move PCM1796 symbols to a header fileClemens Ladisch
Move the PCM1796 register symbol definitions to their own header file. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>