aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) r8169: revert "r8169: read MAC address from EEPROM on init (2nd attempt)" r8169: use hardware auto-padding. igb: remove ASPM L0s workaround netxen: remove old flash check. mv643xx_eth: fix unicast address filter corruption on mtu change xfrm: Fix xfrm_state_find() wrt. wildcard source address. emac: Fix clock control for 405EX and 405EXr chips ixgbe: fix multiple unicast address support via-velocity: Fix DMA mapping length errors on transmit. qlge: bugfix: Pad outbound frames smaller than 60 bytes. qlge: bugfix: Move netif_napi_del() to common call point. qlge: bugfix: Tell hw to strip vlan header. qlge: bugfix: Increase filter on inbound csum. dnet: replace obsolete *netif_rx_* functions with *napi_* net: Add be2net driver. dnet: Fix warnings on 64-bit. dnet: Dave DNET ethernet controller driver (updated) ipv6: Fix BUG when disabled ipv6 module is unloaded bnx2x: Using DMAE to initialize the chip bnx2x: Casting page alignment ...
2009-03-16linux.conf.au 2009: TuzRusty Russell
Impact: help prevent extinction of species The Tasmanian Devil is a shy iconic Australian creature named for its spine-chilling screech. It is threatened with extinction due to a scientifically interesting but horrific transmissible facial cancer. This one is standing in for Tux for one release using the far less-known Devil Facial Tux Disguise. Save The Tasmanian Devil http://tassiedevil.com.au Signed-off-by: Linux.conf.au Hobart Team <contact@marchsouth.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-16filp->f_pos not correctly updated in proc_task_readdirZhang Le
filp->f_pos only get updated at the end of the function. Thus d_off of those dirents who are in the middle will be 0, and this will cause a problem in glibc's readdir implementation, specifically endless loop. Because when overflow occurs, f_pos will be set to next dirent to read, however it will be 0, unless the next one is the last one. So it will start over again and again. There is a sample program in man 2 gendents. This is the output of the program running on a multithread program's task dir before this patch is applied: $ ./a.out /proc/3807/task --------------- nread=128 --------------- i-node# file type d_reclen d_off d_name 506442 directory 16 1 . 506441 directory 16 0 .. 506443 directory 16 0 3807 506444 directory 16 0 3809 506445 directory 16 0 3812 506446 directory 16 0 3861 506447 directory 16 0 3862 506448 directory 16 8 3863 This is the output after this patch is applied $ ./a.out /proc/3807/task --------------- nread=128 --------------- i-node# file type d_reclen d_off d_name 506442 directory 16 1 . 506441 directory 16 2 .. 506443 directory 16 3 3807 506444 directory 16 4 3809 506445 directory 16 5 3812 506446 directory 16 6 3861 506447 directory 16 7 3862 506448 directory 16 8 3863 Signed-off-by: Zhang Le <r0bertz@gentoo.org> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-15r8169: revert "r8169: read MAC address from EEPROM on init (2nd attempt)"françois romieu
It fails on the following systems: - RTL8169sc/8110sc (XID 18000000) reported by Tim Durack <tdurack@gmail.com> (x86) - RTL8169sb/8110sb (XID 10000000) reported by Mikael Pettersson <mikpe@it.uu.se> (ARM) The patch appeared to work on x86 for the following systems: RTL8169sb/8110sb 10000000 PCI (EXT) RTL8110s 04000000 PCI (EXT) RTL8102e 24a00000 PCI-E (LOM) RTL8168c/8111c 3c2000c0 PCI-E (LOM) RTL8168b/8111b 38000000 PCI-E (LOM) RTL8168b/8111b 38000000 PCI-E (EXT) The patch exposes two problems: 1) while not completely wrong, mac addresses are not read correctly from the EEPROM 2) the MAC address registers are not correctly set Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-15r8169: use hardware auto-padding.françois romieu
It shortens the code and fixes the current pci_unmap leak with padded skb reported by Dave Jones. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-15parisc: sba_iommu: fix build bug when CONFIG_PARISC_AGP=yKyle McMartin
CC drivers/parisc/sba_iommu.o drivers/parisc/sba_iommu.c:1373: error: expected identifier or '(' before '}' token make[2]: *** [drivers/parisc/sba_iommu.o] Error 1 make[1]: *** [drivers/parisc] Error 2 make: *** [drivers] Error 2 Don't know how this has gone missed for so long... clearly I need to do builds on my C8000 more often. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-15Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (23 commits) [ARM] Fix virtual to physical translation macro corner cases [ARM] update mach-types [ARM] 5421/1: ftrace: fix crash due to tracing of __naked functions MX1 fix include [ARM] 5419/1: ep93xx: fix build warnings about struct i2c_board_info [ARM] 5418/1: restore lr before leaving mcount ARM: OMAP: board-omap3beagle: set i2c-3 to 100kHz ARM: OMAP: Allow I2C bus driver to be compiled as a module ARM: OMAP: sched_clock() corrected ARM: OMAP: Fix compile error if pm.h is included [ARM] orion5x: pass dram mbus data to xor driver [ARM] S3C64XX: Fix s3c64xx_setrate_clksrc [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/irq.c [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/s3c6400-clock.c [ARM] S3C64XX: Fix USB host clock mux list [ARM] S3C64XX: Fix name of USB host clock. [ARM] S3C64XX: Rename IRQ_UHOST to IRQ_USBH [ARM] S3C64XX: Do gpiolib configuration earlier [ARM] S3C64XX: Staticise s3c64xx_init_irq_eint() [ARM] SMDK6410: Declare iodesc table static ...
2009-03-14igb: remove ASPM L0s workaroundAlexander Duyck
The L0s workaround should be moved into a pci quirk and so it is not necessary in the driver. This update removes the L0s workaround from the igb driver. This was the second half of the PCI quirk patch that Matthew Wilcox did not pick up when he picked up the quirk patch. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Fix Xilinx SystemACE driver to handle empty CF slot block: fix memory leak in bio_clone() block: Add gfp_mask parameter to bio_integrity_clone()
2009-03-14Fix Xilinx SystemACE driver to handle empty CF slotGrant Likely
The SystemACE driver does not handle an empty CF slot gracefully. An empty CF slot ends up hanging the system. This patch adds a check for the CF state and stops trying to process requests if the slot is empty. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-14block: fix memory leak in bio_clone()Li Zefan
If bio_integrity_clone() fails, bio_clone() returns NULL without freeing the newly allocated bio. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-14block: Add gfp_mask parameter to bio_integrity_clone()un'ichi Nomura
Stricter gfp_mask might be required for clone allocation. For example, request-based dm may clone bio in interrupt context so it has to use GFP_ATOMIC. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-14Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Mark Eins: Fix configuration. MIPS: Fix TIF_32BIT undefined problem when seccomp is disabled
2009-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (31 commits) [SCSI] qla2xxx: Update version number to 8.03.00-k4. [SCSI] qla2xxx: Correct overwrite of pre-assigned init-control-block structure size. [SCSI] qla2xxx: Correct truncation in return-code status checking. [SCSI] qla2xxx: Correct vport delete bug. [SCSI] qla2xxx: Use correct value for max vport in LOOP topology. [SCSI] qla2xxx: Correct address range checking for option-rom updates. [SCSI] fcoe: Change fcoe receive thread nice value from 19 (lowest priority) to -20 [SCSI] fcoe: fix handling of pending queue, prevent out of order frames (v3) [SCSI] fcoe: Out of order tx frames was causing several check condition SCSI status [SCSI] fcoe: fix kfree(skb) [SCSI] fcoe: ETH_P_8021Q is already in if_ether and fcoe is not using it anyway [SCSI] libfc: do not change the fh_rx_id of a recevied frame [SCSI] fcoe: Correct fcoe_transports initialization vs. registration [SCSI] fcoe: Use setup_timer() and mod_timer() [SCSI] libfc, fcoe: Remove unnecessary cast by removing inline wrapper [SCSI] libfc, fcoe: Cleanup function formatting and minor typos [SCSI] libfc, fcoe: Fix kerneldoc comments [SCSI] libfc: Cleanup libfc_function_template comments [SCSI] libfc: check for err when recv and state is incorrect [SCSI] libfc: rename rp to rdata in fc_disc_new_target() ...
2009-03-14Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_piix: add workaround for Samsung DB-P70 libata: Keep shadow last_ctl up to date during resets sata_mv: fix MSI irq race condition
2009-03-14Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Fix the fix to Bugzilla #11061, when IPv6 isn't defined... SUNRPC: xprt_connect() don't abort the task if the transport isn't bound SUNRPC: Fix an Oops due to socket not set up yet... Bug 11061, NFS mounts dropped NFS: Handle -ESTALE error in access() NLM: Fix GRANT callback address comparison when IPv6 is enabled NLM: Shrink the IPv4-only version of nlm_cmp_addr() NFSv3: Fix posix ACL code NFS: Fix misparsing of nfsv4 fs_locations attribute (take 2) SUNRPC: Tighten up the task locking rules in __rpc_execute()
2009-03-14Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: Use xs->bucket to set xattr value outside ocfs2: Fix a bug found by sparse check. ocfs2: tweak to get the maximum inline data size with xattr ocfs2: reserve xattr block for new directory with inline data
2009-03-14Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (10978): Report tuning algorith correctly V4L/DVB (10977): STB6100 init fix, the call to stb6100_set_bandwidth needs an argument V4L/DVB (10976): Bug fix: For legacy applications stv0899 performs search only first time after insmod. V4L/DVB (10975): Bug: Use signed types, Offsets and range can be negative V4L/DVB (10974): Use Diseqc 3/3 mode to send data V4L/DVB (10972): zl10353: i2c_gate_ctrl bug fix V4L/DVB (10834): zoran: auto-select bt866 for AverMedia 6 Eyes V4L/DVB (10832): tvaudio: Avoid breakage with tda9874a V4L/DVB (10789): m5602-s5k4aa: Split up the initial sensor probe in chunks.
2009-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.29Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.29: parisc: update defconfigs parisc: define x->x mmio accessors parisc: dino: struct device - replace bus_id with dev_name(), dev_set_name() parisc: convert cpu_check_affinity to new cpumask api parisc: convert (read|write)bwlq to inlines parisc: fix use of new cpumask api in irq.c parisc: update parisc for new irq_desc parisc: update MAINTAINERS parisc: fix wrong assumption about bus->self parisc: fix 64bit build parisc: add braces around arguments in assembler macros parisc: fix dev_printk() compile warnings for accessing a device struct parisc: remove unused local out_putf label parisc: fix `struct pt_regs' declared inside parameter list warning parisc: fix section mismatch warnings parisc: remove klist iterators parisc: BUG_ON() cleanup
2009-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: save the returned value of dma_map_sg ide-floppy: do not map dataless cmds to an sg
2009-03-14vmscan: pgmoved should be cleared after updating recent_rotatedDaisuke Nishimura
pgmoved should be cleared after updating recent_rotated. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Rik van Riel <riel@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-14eCryptfs: don't encrypt file key with filename keyTyler Hicks
eCryptfs has file encryption keys (FEK), file encryption key encryption keys (FEKEK), and filename encryption keys (FNEK). The per-file FEK is encrypted with one or more FEKEKs and stored in the header of the encrypted file. I noticed that the FEK is also being encrypted by the FNEK. This is a problem if a user wants to use a different FNEK than their FEKEK, as their file contents will still be accessible with the FNEK. This is a minimalistic patch which prevents the FNEKs signatures from being copied to the inode signatures list. Ultimately, it keeps the FEK from being encrypted with a FNEK. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Acked-by: Dustin Kirkland <kirkland@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-14nommu: ramfs: don't leak pages when adding to page cache failsJohannes Weiner
When a ramfs nommu mapping is expanded, contiguous pages are allocated and added to the pagecache. The caller's reference is then passed on by moving whole pagevecs to the file lru list. If the page cache adding fails, make sure that the error path also moves the pagevec contents which might still contain up to PAGEVEC_SIZE successfully added pages, of which we would leak references otherwise. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Howells <dhowells@redhat.com> Cc: Enrik Berkhan <Enrik.Berkhan@ge.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-14nommu: ramfs: pages allocated to an inode's pagecache may get wrongly discardedEnrik Berkhan
The pages attached to a ramfs inode's pagecache by truncation from nothing - as done by SYSV SHM for example - may get discarded under memory pressure. The problem is that the pages are not marked dirty. Anything that creates data in an MMU-based ramfs will cause the pages holding that data will cause the set_page_dirty() aop to be called. For the NOMMU-based mmap, set_page_dirty() may be called by write(), but it won't be called by page-writing faults on writable mmaps, and it isn't called by ramfs_nommu_expand_for_mapping() when a file is being truncated from nothing to allocate a contiguous run. The solution is to mark the pages dirty at the point of allocation by the truncation code. Signed-off-by: Enrik Berkhan <Enrik.Berkhan@ge.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-14netxen: remove old flash check.Dhananjay Phadke
Remove flash size check which made sense only for ancient boards with 1MB flash. The check is based on values read from specific locations and fails with firmware size changes. This prevents driver from getting right mac addresses. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13mv643xx_eth: fix unicast address filter corruption on mtu changeLennert Buytenhek
When mv643xx_eth_open() is called to up an interface, port_start() will first re-program the unicast address filter, and then re-initialise the PORT_CONFIG register, but that will disable unicast promiscuous mode if it was enabled by the unicast address filter setup. This isn't a problem on ifconfig up, as ->set_rx_mode() will be called shortly afterwards which will program the filters again, but it does trigger when changing the MTU, which calls mv643xx_eth_stop() and then mv643xx_eth_open() by hand to repopulate the receive rings with skbuffs of the new size. Swap the initialisation of the PORT_START register and the call to the unicast filter setup function to fix this. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13MIPS: Mark Eins: Fix configuration.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-03-13MIPS: Fix TIF_32BIT undefined problem when seccomp is disabledZhang Le
Signed-off-by: Zhang Le <r0bertz@gentoo.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-03-13xfrm: Fix xfrm_state_find() wrt. wildcard source address.David S. Miller
The change to make xfrm_state objects hash on source address broke the case where such source addresses are wildcarded. Fix this by doing a two phase lookup, first with fully specified source address, next using saddr wildcarded. Reported-by: Nicolas Dichtel <nicolas.dichtel@dev.6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13emac: Fix clock control for 405EX and 405EXr chipsBenjamin Herrenschmidt
The EMAC variant in the 405EX and 405EXr chips needs the "440EP" type clock control workaround to avoid lockups of the Rx side during reset. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13ixgbe: fix multiple unicast address supportChris Leech
Multiple unicast address support appears to have been broken with the change to support net_device_ops. This a regression from 2.6.28 to 2.6.29. I'm not 100% on whether ndo_set_multicast_list can be NULL after this or not. If ndo_set_rx_mode is set everything _should_ be using it. Signed-off-by: Chris Leech <christopher.leech@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13via-velocity: Fix DMA mapping length errors on transmit.Dave Jones
From: Dave Jones <davej@redhat.com> The dma-debug changes caught that this driver uses the wrong DMA mapping length when skb_padto() does something. With suggestions from Eric Dumazet. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13ide: save the returned value of dma_map_sgFUJITA Tomonori
dma_map_sg could return a value different to 'nents' argument of dma_map_sg so the ide stack needs to save it for the later usage (e.g. for_each_sg). The ide stack also needs to save the original sg_nents value for pci_unmap_sg. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> [bart: backport to Linus' tree] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-13ide-floppy: do not map dataless cmds to an sgBorislav Petkov
since it fails the virt_to_page() translation check with DEBUG_VIRTUAL enabled. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> [bart: backport to Linus' tree] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-13ata_piix: add workaround for Samsung DB-P70Tejun Heo
Samsung DB-P70 somehow botched the first ICH9 SATA port. The board doesn't expose the first port but somehow SStatus reports link online while failing SRST protocol leading to repeated probe failures and thus long boot delay. Because the BIOS doesn't carry any identifying DMI information, the port can't be blacklisted safely. Fortunately, the controller does have subsystem vendor and ID set. It's unclear whether the subsystem IDs are used only for the board but it can be safely worked around by disabling SIDPR access and just using SRST works around the problem. Even when the workaround is triggered on an unaffected board the only side effect will be missing SCR access. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Joseph Jang <josephjang@gmail.com> Reported-by: Jonghyon Sohn <mrsohn@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-13libata: Keep shadow last_ctl up to date during resetsStuart MENEFY
libata keeps a shadow copy of the ATA CTL register (which is write only), and only writes to the hardware when the required value doesn't match the shadow. However this copy wasn't being maintained when performing reset functions. This could cause problems for the first operation after a reset when the correct value might not be written to the CTL register. This problem was observed when hotplugging a drive: the identify command was being issued with interrupts enabled, when they should have been disabled. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-13sata_mv: fix MSI irq race conditionMark Lord
Fix a (rare) race condition in mv_interrupt() when using MSI. The value of hpriv->main_irq_mask_addr can change on on the fly, and without this patch we could end up writing back a stale copy to the hardware. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-13qlge: bugfix: Pad outbound frames smaller than 60 bytes.Ron Mercer
With some asic configurations xmit of frames smaller than 60 bytes may fail. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13qlge: bugfix: Move netif_napi_del() to common call point.Ron Mercer
Moving netif_napi_del() up the call chain so it will get called from all exit points. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13qlge: bugfix: Tell hw to strip vlan header.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13qlge: bugfix: Increase filter on inbound csum.Ron Mercer
Chip does not do UDP checksum when fragmentation occurs. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13dnet: replace obsolete *netif_rx_* functions with *napi_*Ilya Yanok
*netif_rx_* functions is obsolete and removed in newer kernels so we need to use corresponding *napi_* functions instead. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13V4L/DVB (10978): Report tuning algorith correctlyMatthias Schwarzzot
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13V4L/DVB (10977): STB6100 init fix, the call to stb6100_set_bandwidth needs ↵Hans Werner
an argument in Hz not kHz, and a comment incorrectly says MHz instead of Hz. I don't know if this caused real problems anywhere Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13V4L/DVB (10976): Bug fix: For legacy applications stv0899 performs search ↵Igor M. Liplianin
only first time after insmod. For legacy applications stv0899 performs search only first time after insmod due to not set DVBFE_ALGO_SEARCH_AGAIN bit Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13V4L/DVB (10975): Bug: Use signed types, Offsets and range can be negativeManu Abraham
Code simplification: use in kernel macros Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13V4L/DVB (10974): Use Diseqc 3/3 mode to send dataSigmund Augdal
Signed-off-by: Sigmund Augdal <sigmund@snap.tv> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13parisc: update defconfigsKyle McMartin
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: define x->x mmio accessorsKyle McMartin
Bloody inconsiderate driver writers... Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: dino: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 12:22:18 +0000