aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-06-16sparc: move the duplication in dma-mapping_{32|64}.h to dma-mapping.hFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: Robert Reif <reif@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16p9100: use standard fields for framebuffer physical address and lengthKrzysztof Helt
Use standard fields fbinfo.fix.smem_start and fbinfo.fix.smem_len for physical address and length of framebuffer. This also fixes output of the 'fbset -i' command - address and length of the framebuffer are displayed correctly. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16leo: use standard fields for framebuffer physical address and lengthKrzysztof Helt
Use standard fields fbinfo.fix.smem_start and fbinfo.fix.smem_len for physical address and length of framebuffer. This also fixes output of the 'fbset -i' command - address and length of the framebuffer are displayed correctly. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16cg6: use standard fields for framebuffer physical address and lengthKrzysztof Helt
Use standard fields fbinfo.fix.smem_start and fbinfo.fix.smem_len for physical address and length of framebuffer. This also fixes output of the 'fbset -i' command - address and length of the framebuffer are displayed correctly. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16cg3: use standard fields for framebuffer physical address and lengthKrzysztof Helt
Use standard fields fbinfo.fix.smem_start and fbinfo.fix.smem_len for physical address and length of framebuffer. This also fixes output of the 'fbset -i' command - address and length of the framebuffer is displayed correctly. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16cg14: use standard fields for framebuffer physical address and lengthKrzysztof Helt
Use standard fields fbinfo.fix.smem_start and fbinfo.fix.smem_len for physical address and length of framebuffer. This also fixes output of the 'fbset -i' command - address and length of the framebuffer is displayed correctly. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16bw2: use standard fields for framebuffer physical address and lengthKrzysztof Helt
Use standard fields fbinfo.fix.smem_start and fbinfo.fix.smem_len for physical address and length of framebuffer. This also fixes output of the 'fbset -i' command - address and length of the framebuffer is displayed correctly. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16sparc64: fix and optimize irq distributionHong H. Pham
irq_choose_cpu() should compare the affinity mask against cpu_online_map rather than CPU_MASK_ALL, since irq_select_affinity() sets the interrupt's affinity mask to cpu_online_map "and" CPU_MASK_ALL (which ends up being just cpu_online_map). The mask comparison in irq_choose_cpu() will always fail since the two masks are not the same. So the CPU chosen is the first CPU in the intersection of cpu_online_map and CPU_MASK_ALL, which is always CPU0. That means all interrupts are reassigned to CPU0... Distributing interrupts to CPUs in a linearly increasing round robin fashion is not optimal for the UltraSPARC T1/T2. Also, the irq_rover in irq_choose_cpu() causes an interrupt to be assigned to a different processor each time the interrupt is allocated and released. This may lead to an unbalanced distribution over time. A static mapping of interrupts to processors is done to optimize and balance interrupt distribution. For the T1/T2, interrupts are spread to different cores first, and then to strands within a core. The following is some benchmarks showing the effects of interrupt distribution on a T2. The test was done with iperf using a pair of T5220 boxes, each with a 10GBe NIU (XAUI) connected back to back. TCP | Stock Linear RR IRQ Optimized IRQ Streams | 2.6.30-rc5 Distribution Distribution | GBits/sec GBits/sec GBits/sec --------+----------------------------------------- 1 0.839 0.862 0.868 8 1.16 4.96 5.88 16 1.15 6.40 8.04 100 1.09 7.28 8.68 Signed-off-by: Hong H. Pham <hong.pham@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16sparc64: Use new dynamic per-cpu allocator.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16sparc64: Only allocate per-cpu areas for possible cpus.David S. Miller
This gets us real close to the generic implementation of setup_per_cpu_areas() except: 1) We store the per-cpu offset into the trap_block[], whereas the generic code has it's own static array. 2) We have to initialize the %g5 register to hold the boot cpu's per-cpu area offset. 3) The OBP/MDESC cpu info scan is performed at the end. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16sparc64: Get rid of real_setup_per_cpu_areas().David S. Miller
Now that we defer the cpu_data() initializations to the end of per-cpu setup, we can get rid of this local hack we had to setup the per-cpu areas eary. This is a necessary step in order to support HAVE_DYNAMIC_PER_CPU_AREA since the per-cpu setup must run when page structs are available. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16sparc64: Defer cpu_data() setup until end of per-cpu data initialization.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16sparc64: Make mdesc_fill_in_cpu_data take a cpumask_t pointer.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16sparc: Call OF and MD cpu scanning explicitly from paging_init()David S. Miller
We need to split up the cpu present mask setup from the cpu_data initialization, and this is a first step towards that. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16sparc64: Refactor MDESC cpu scanning code using an iterator.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16sparc64: Refactor OBP cpu scanning code using an iterator.David S. Miller
With feedback from Sam Ravnborg. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16sparc64: Use BUILD_BUG_ON() in trap_init().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16sparc64: Store per-cpu offset in trap_block[]David S. Miller
Surprisingly this actually makes LOAD_PER_CPU_BASE() a little more efficient. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16sparc64: Move trap_block[] definitions into a new header file.David S. Miller
Later we're going to want to get at these definitions from asm/percpu.h and that's not possible via cpudata.h because of the set of dependencies the non-trap_block[] stuff has. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16sparc64: Reclaim trap_block[]->hdescDavid S. Miller
This really isn't necessary at all, a local variable suits the job just fine. This frees up 8 bytes in the trap_block[] that we can use later to store the per-cpu base addresses. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16block: remove some includings of blktrace_api.hLi Zefan
When porting blktrace to tracepoints, we changed to trace/block.h for trace prober declarations. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16[S390] s390: hibernation support for s390Hans-Joachim Picht
This patch introduces the hibernation backend support to the s390 architecture. Now it is possible to suspend a mainframe Linux guest using the following command: echo disk > /sys/power/state Signed-off-by: Hans-Joachim Picht <hans@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: dcssblk power management callbacks.Gerald Schaefer
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: monreader power management callbacks.Gerald Schaefer
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: monwriter power management callbacks.Gerald Schaefer
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: memory hotplug power management callbacksGerald Schaefer
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: con3270 power management callbacks.Martin Schwidefsky
Introduce the power management callbacks to the 3270 driver. On suspend the current 3270 view is deactivated and for non-console 3270 device the release callback is done. This disconnects the current tty / fullscreen application from the 3270 device. On resume the current view is reactivated, on the tty you get a fresh login. If the system panics before the 3270 device has been resumed, the ccw device for the 3270 console is reactivated with ccw_device_force_console. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: smsgiucv power management callbacks.Martin Schwidefsky
Create dummy iucv-device to get control when the system is suspended and resumed. Server the smsg iucv path on suspend, reestablish the path on resume. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: hvc_iucv power management callbacksHendrik Brueckner
The patch adds supporting for suspending and resuming IUCV HVC terminal devices from disk. The obligatory Linux device driver interfaces has been added by registering a device driver on the IUCV bus. For each IUCV HVC terminal device the driver creates a respective device on the IUCV bus. To support suspend and resume, the PM freeze callback severs any established IUCV communication path and triggers a HVC tty hang-up when the system image is restored. IUCV communication path are no longer valid when the z/VM guest is halted. The device driver initialization has been updated to register devices and the a new routine has been extracted to facilitate the hang-up of IUCV HVC terminal devices. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] PM: af_iucv power management callbacks.Ursula Braun
Patch establishes a dummy afiucv-device to make sure af_iucv is notified as iucv-bus device about suspend/resume. The PM freeze callback severs all iucv pathes of connected af_iucv sockets. The PM thaw/restore callback switches the state of all previously connected sockets to IUCV_DISCONN. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: netiucv power management callbacks.Ursula Braun
Patch establishes a dummy netiucv device to make sure iucv is notified about suspend/resume even if netiucv is the only loaded iucv-exploting module without any real net_device defined. The PM freeze callback closes all open netiucv connections. Thus the corresponding iucv path is removed. The PM thaw/restore callback re-opens previously closed netiucv connections. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: iucv power management callbacks.Ursula Braun
Patch calls the PM callback functions of iucv-bus devices, which are responsible for removal of their established iucv pathes. The PM freeze callback for the first iucv-bus device disables all iucv interrupts except the connection severed interrupt. The PM freeze callback for the last iucv-bus device shuts down iucv. The PM thaw callback for the first iucv-bus device re-enables iucv if it has been shut down during freeze. If freezing has been interrupted, it re-enables iucv interrupts according to the needs of iucv-exploiters. The PM restore callback for the first iucv-bus device re-enables iucv. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] iucv: establish reboot notifierUrsula Braun
To guarantee a proper cleanup, patch adds a reboot notifier to the iucv base code, which disables iucv interrupts, shuts down established iucv pathes, and removes iucv declarations for z/VM. Checks have to be added to the iucv-API functions, whether iucv-buffers removed at reboot time are still declared. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: power management support for SCLP drivers.Michael Holzheu
The SCLP base driver defines a new notifier call back for all upper level SCLP drivers, like the SCLP console, etc. This guarantees that in suspend first the upper level drivers are suspended and afterwards the SCLP base driver. For resume it is the other way round. The SCLP base driver itself registers a new platform device at the platform bus and gets PM notifications via the dev_pm_ops. In suspend, the SCLP base driver switches off the receiver and sender mask This is done in sclp_deactivate(). After suspend all new requests will be rejected with -EIO and no more interrupts will be received, because the masks are switched off. For resume the sender and receiver masks are reset in the sclp_reactivate() function. When the SCLP console is suspended, all new messages are cached in the sclp console buffers. In resume, all the cached messages are written to the console. In addition to that we have an early resume function that removes the cached messages from the suspend image. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: tape power management callbacksFrank Munzert
Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: vmlogrdr power management callbacksStefan Weinhuber
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: vmur driver power management callbacksFrank Munzert
Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: appldata power management callbacksGerald Schaefer
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: vmwatchdog power management callbacks.Christian Borntraeger
This patch implements suspend/hibernation for the vmwatchdog driver. The pm_notifier_callchain is used to get control on PM events. Since watchdog operation and suspend cannot work together in a reliable fashion, the open flag is also used to prevent suspend and open from happening at the same time. The watchdog can also be active with no open file descriptor. This patch adds another flag which is only changed in vmwdt_keep_alive and vmwdt_disable. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: zfcp driver power management callbacksMartin Petermann
Signed-off-by: Martin Petermann <martin.petermann@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: claw driver power management callbacksFrank Blaschka
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: ctcm driver power management callbacksFrank Blaschka
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: qeth driver power management callbacksFrank Blaschka
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: lcs driver power management callbacksKlaus-Dieter Wacket
Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: con3215 power management callbacksMartin Schwidefsky
Introduce the power management callbacks to the 3215 console. On suspend the console buffer is flushed to the 3215 device to have an empty console buffer. Printks done while the 3215 device is suspended are buffered in the 64K buffer of the 3215 device. If the buffer is full new messages will push out the oldest messages to make room for the most recent message. On resume the buffered messages are printed. If the system panics before the 3215 device is resumed ccw_device_force_console is used to get the console working again. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] cio: force console functionMartin Schwidefsky
If something goes wrong in a suspend / resume cycle a ccw based console if very likely in the suspended state and cannot print anything. Introduce ccw_device_force_console to force the wake up of the console device to be able to print the oops message. The console device drivers should use this function only if the system paniced. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: xpram driver power management callbacksMichael Holzheu
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: add kernel_page_presentHans-Joachim Picht
Fix the following build failure caused by make allyesconfig using CONFIG_HIBERNATION and CONFIG_DEBUG_PAGEALLOC kernel/built-in.o: In function `saveable_page': kernel/power/snapshot.c:897: undefined reference to `kernel_page_present' kernel/built-in.o: In function `safe_copy_page': kernel/power/snapshot.c:948: undefined reference to `kernel_page_present' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Hans-Joachim Picht <hans@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: dasd power management callbacks.Stefan Haberland
Introduce the power management callbacks to the dasd driver. On suspend the dasd devices are stopped and removed from the focus of alias management. On resume they are reinitialized by rereading the device characteristics and adding the device to the alias management. In case the device has gone away during suspend it will caught in the suspend state with stopped flag set to UNRESUMED. After it appears again the restore function is called again. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: chsc subchannel driver power management callbacksCornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>