aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-05-16[ALSA] ASoC AC97 static GPL symbol fixLiam Girdwood
This patch fixes a bug whereby the GPL'ed symbol ac97_dai was being declared as static. Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-16[ALSA] hda-codec - Make the mixer capability check more robustTakashi Iwai
In some cases, mixer elements return -EINVAL because it couldn't obtain proper amp_cap bits. The patch improves the robustness, trying the amp_cap query again in such a case. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-16[ALSA] usb-audio: another Logitech QuickCam IDDaniel Drake
This patch adds the ID for another quickcam microphone, reported by freqmod on ALSA ticket #0003040 I'm going to submit a USB patch separately to provide a macro to simplify these entries, as suggested by Alan Stern. We could switch to using that in future. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-15arm: walk_stacktrace() needs to be exportedAl Viro
oprofile depends on having it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15fix uml-x86_64Al Viro
__NR_syscall_max is done in x86_64 asm-offsets; do an equivalent in uml kern_constants.h Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15audit_match_signal() and friends are used only if CONFIG_AUDITSYSCALL is setAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15m32r: __xchg() should be always_inlineAl Viro
it depends on elimination of unreachable branches in switch (by object size), so we must declare it always_inline Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15rpadlpar breakage - fallout of struct subsystem removalAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15em28xx and ivtv should depend on PCIAl Viro
.. because video-buf.c requires PCI, and VIDEO_EM28XX selects it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15missing includes in mlx4Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15missing dependencies for USB drivers in inputAl Viro
stuff that does select USB should depend on USB_ARCH_HAS_HCD, or we'll end up with unbuildable configs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15missing mm.h in fw-ohciAl Viro
need it for page_private(), not all targets have it pulled indirectly Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: Add .gitignore entry for syscalltab. sh64: generic quicklist support. sh64: Update cayman defconfig. sh64: Fixup sh-sci build. sh64: ppoll/pselect6() and restartable syscalls. sh64: dma-mapping updates. sh64: Fixups for the irq_regs changes. sh64: Wire up many new syscalls. spelling fixes: arch/sh64/ sh64: ROUND_UP macro cleanup in arch/sh64/kernel/pci_sh5.c
2007-05-15Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: Use menuconfig objects: IDE sl82c105: Switch to ref counting API ide: remove ide_use_dma() ide: add missing validity checks for identify words 62 and 63 ide: remove ide_dma_enable() sl82c105: add speedproc() method and MWDMA0/1 support cs5530/sc1200: add ->speedproc support cs5530/sc1200: DMA support cleanup ide: use ide_tune_dma() part #2 cs5530/sc1200: add ->udma_filter methods ide: always disable DMA before tuning it pdc202xx_new: use ide_tune_dma() alim15x3: use ide_tune_dma() sis5513: PIO mode setup fixes serverworks: PIO mode setup fixes pdc202xx_old: rewrite mode programming code (v2)
2007-05-15Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: ucc_geth: eliminate max-speed, change interface-type to phy-connection-type smc911x: fix compilation breakage pasemi_mac: Fix local-mac-address parsing pasemi_mac: Terminate PCI ID list pasemi_mac: Interrupt ack fixes pasemi_mac: Fix register defines
2007-05-15x86: Fix discontigmem + non-HIGHMEM compileLinus Torvalds
It's not necessarily a very sane configuration, but people running "make randconfig" noticed it wouldn't compile. This fixes some obvious problems in discontig.c to allow a clean compile. Acked-by: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-16Use menuconfig objects: IDEJan Engelhardt
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16sl82c105: Switch to ref counting APIAlan Cox
Not sure how this one got missed in the great purge some time ago but it did. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16ide: remove ide_use_dma()Bartlomiej Zolnierkiewicz
ide_use_dma() duplicates a lot of ide_max_dma_mode() functionality and as all users of ide_use_dma() were converted to use ide_tune_dma() now it is possible to add missing checks to ide_tune_dma() and remove ide_use_dma() completely, so do it. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16ide: add missing validity checks for identify words 62 and 63Bartlomiej Zolnierkiewicz
Check validity of identify words 62 and 63 before using them in ide_get_mode_mask(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16ide: remove ide_dma_enable()Bartlomiej Zolnierkiewicz
* check ->speedproc return value in ide_tune_dma() * use ide_tune_dma() in cmd64x/cs5530/sc1200/siimage/sl82c105/scc_pata drivers * remove no longer needed ide_dma_enable() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16sl82c105: add speedproc() method and MWDMA0/1 supportSergei Shtylyov
Add the speedproc() method for setting transfer modes, modify config_for_dma() to call it and use ide_max_dma_mode() to select the best DMA mode. Add support for the multiword DMA modes 0 and 1, using the upper half of the 'drive_data' field to store the DMA timings to program into the drive control register when DMA is turned on for real. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16cs5530/sc1200: add ->speedproc supportBartlomiej Zolnierkiewicz
* add {cs5530,sc1200}_tunepio() for programming PIO timings * add {cs5530,sc1200}_tune_chipset() (->speedproc method) for setting transfer mode and convert {cs5530,sc1200}_config_dma() to use it * bump driver version Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16cs5530/sc1200: DMA support cleanupBartlomiej Zolnierkiewicz
sc1200.c: * remove open-coded variant of ide_dma_host_off() (== ->dma_host_off), it is not needed because ->dma_off_quietly calls ->dma_host_off * use ->dma_host_on (== ide_dma_host_on() for this driver) instead of open-coded variant, call it from the users of sc1200_config_dma2() [ there is no need to call ->dma_host_on in sc1200_config_dma() because core code takes care of calling ->ide_dma_on on successful execution of ->ide_dma_check ] * add comment about ->tuneproc interface abuse cs5530.c/sc1200.c: * core code takes care of calling ->dma_off_quietly before calling ->ide_dma_check so there is no need to call it in ->ide_dma_check methods * bump driver version Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16ide: use ide_tune_dma() part #2Bartlomiej Zolnierkiewicz
Use ide_tune_dma() in ide-cris/it821x/pdc202xx_old/serverworks drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16cs5530/sc1200: add ->udma_filter methodsBartlomiej Zolnierkiewicz
CS5530/SC1200 specifies that two drives on the same cable cannot mix UDMA/MDMA. Add {cs5530,sc1200}_udma_filter() to handle this. This also makes it possible to remove open-coded best DMA mode selection and use standard ide_use_dma()/ide_max_dma_mode() helpers. While at it bump version numbers. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16ide: always disable DMA before tuning itBartlomiej Zolnierkiewicz
ide_start_power_step() and set_using_dma() were missing ->dma_off_quietly call (comment in probe_hwif() states that DMA should be always cleared before tuning is attempted). Fix it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16pdc202xx_new: use ide_tune_dma()Bartlomiej Zolnierkiewicz
* remove code enabling IORDY and prefetch from config_chipset_for_dma(), as the comment states it has no real effect because these settings are overriden when the PIO mode is set (and for this driver ->autotune == 1 so PIO mode is always programmed) * use ide_tune_dma() in pdcnew_config_drive_xfer_rate() and remove no longer needed config_chipset_for_dma() There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16alim15x3: use ide_tune_dma()Bartlomiej Zolnierkiewicz
Use ide_tune_dma() in ali15x3_config_drive_for_dma() and remove all the open coded DMA tuning code and also config_chipset_for_dma(). Set ->atapi_dma flag correctly in init_hwif_common_ali15x3() so ide_tune_dma() can take care of checking if ATAPI DMA is allowed and remove open coded ATAPI DMA check from ali15x3_config_drive_for_dma(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16sis5513: PIO mode setup fixesBartlomiej Zolnierkiewicz
* limit max PIO mode to PIO4, this driver doesn't support PIO5 and attempt to program PIO5 by config_art_rwp_pio() could result in incorrect PIO timings being programmed and possibly the data corruption (for < ATA100 family chipsets PIO0 timings were used, for ATA100 and ATA100a - the random content of test1 variable was used, for ATA133 - MWDMA0 timings were used) * BUG() in sis5513_tune_chipset() if somebody tries to force unsupported PIO5, also cleanup this function a bit while at it * add comment about PIO0 timings for < ATA100 family chipsets * remove open-coded best PIO mode selection from config_art_rwp_pio(), it contained numerous bugs: - it didn't check for validity of id->eide_pio_modes and id->eide_pio_iordy before using them - it tried to found out maximum PIO mode basing on minimum IORDY cycle time (moreover wrong cycle times were used for PIO1/5) - it was overriding PIO blacklist and conservative PIO "downgrade" done by ide_get_best_pio_mode() * use sis5513_tune_drive() instead of config_art_rwp_pio() in sis5513_config_xfer_rate() so the correct PIO mode is also set on drive even if the device is not IORDY/DMA capable * config_art_rwp_pio() was always setting the best possible mode and not the wanted one - fix it and move ide_get_best_pio_mode() call to config_chipset_for_pio() * don't use ide_find_best_mode() in config_chipset_for_pio(), it was being overriden by config_art_rwp_pio() for the host timings anyway + we need to set the same PIO mode on the device and the host * pass correct "pio" argument (255 instead of 5) to sis5513_tune_drive() call in sis5513_config_xfer_rate() so the best PIO mode is set on the drive and not PIO4 * rename sis5513_tune_drive() to sis5513_tuneproc() and config_chipset_for_pio() to sis5513_tune_driver() * bump driver version Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16serverworks: PIO mode setup fixesBartlomiej Zolnierkiewicz
* limit max PIO mode to PIO4, this driver doesn't support PIO5 and attempt to program PIO5 by svwks_tune_chipset() could result in incorrect PIO timings being programmed and possibly the data corruption (it seems that the minimum possible values were used but I lack the datasheets to be sure) * select best PIO mode in svwks_tune_drive() and not in svwks_tune_chipset() when doing PIO autotuning (pio == 255) * don't try to tune PIO in config_chipset_for_dma() as ide_dma_enable() could return 1 if DMA was previously enabled (svwks_config_drive_xfer_rate() takes care of PIO tuning if no suitable DMA mode is found) * remove config_chipset_for_pio() and use svwks_tune_drive() instead, config_chipset_for_pio() contained numerous bugs when selecting PIO mode (luckily it was only used for devices limited to PIO by capabilities/BIOS): - it didn't check for validity of id->eide_pio_modes and id->eide_pio_iordy before using them - it tried to found out maximum PIO mode basing on minimum IORDY cycle time (moreover wrong cycle times were used for PIO0/1/5) - it was overriding PIO blacklist and conservative PIO "downgrade" done by ide_get_best_pio_mode() - if the max drive PIO was PIO5 then XFER_PIO_0/XFER_PIO_SLOW was selected (XFER_PIO_SLOW is not supported by svwks_tune_chipset() so the result was the same as if using XFER_PIO_5 => wrong PIO timings were set) - it was overriding drive->current_speed * bump driver version Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16pdc202xx_old: rewrite mode programming code (v2)Bartlomiej Zolnierkiewicz
This patch is based on the documentation (I would like to thank Promise for it) and also partially on the older vendor driver. Rewrite mode programming code: * disable 66MHz clock in pdc202xx_tune_chipset() so it is correctly disabled even if both devices on the channel are not DMA capable and after reset * enable/disable IORDY and PREFETCH bits in pdc202xx_tune_chipset() as they need to be setup correctly also for PIO only devices, plus IORDY wasn't disabled for non-IORDY devices and PREFETCH wasn't disabled for ATAPI devices * remove dead code for setting SYNC_ERDDY_EN bits from config_chipset_for_dma() (driver sets ->autotune to 1 so PIO modes are always programmed => lower nibble of register A never equals 4 => "chipset_is_set" is always true) * enable PIO mode programming for all ATAPI devices (it was limited to ->media == ide_cdrom devices) * remove extra reads of registers A/B/C, don't read register D et all * do clearing / programming of registers A/B/C in one go (gets rid of extra PCI config space read/write cycle) * set initial values of drive_conf/AP/BP/CP variables to zero (paranoia for the case when PCI reads fail) * remove XFER_UDMA6 to XFER_UDMA5 remapping case - it can't happen (ide_rate_filter() takes care of it) * fix XFER_MW_DMA0 timings (they were overclocked, use the official ones) * fix bitmasks for clearing bits of register B: - when programming DMA mode bit 0x10 of register B was cleared which resulted in overclocked PIO timing setting (iff PIO0 was used) - when programming PIO mode bits 0x18 weren't cleared so suboptimal timings were used for PIO1-4 if PIO0 was previously set (bit 0x10) and for PIO0/3/4 if PIO1/2 was previously set (bit 0x08) * add FIXME comment about missing locking for 66MHz clock register Also while at it: * remove unused defines * do a few cosmetic / CodingStyle fixes * bump driver version v2: * in pdc202xx_tune_chipset() the old content of drive configuration registers is used only by the debugging code so cover "drive_conf" PCI registers read by #if PDC202XX_DEBUG_DRIVE_INFO (Noticed by Sergei Shtylyov) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-15ucc_geth: eliminate max-speed, change interface-type to phy-connection-typeKim Phillips
It was agreed that phy-connection-type was a better name for the interface-type property, so this patch renames it. Also, the max-speed property name was determined too generic, and is therefore eliminated in favour of phy-connection-type derivation logic. includes corrections to copyright text. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15smc911x: fix compilation breakageVitaly Wool
Looks like the new version of this patch has been overlooked, so I'm resending it. It just adapts the driver to the new IRQ API according to what Russell has pointed out. drivers/net/smc911x.c | 6 ++---- 1 files changed, 2 insertions(+), 4 deletions(-) Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15pasemi_mac: Fix local-mac-address parsingolof@lixom.net
Turns out we have an old version of firmware that stores the mac address in 'mac-address' as a string instead of a byte array. All versions that use local-mac-address should have it as byte array, so no need to do string parsing for that case. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15pasemi_mac: Terminate PCI ID listolof@lixom.net
This caused some very interesting behaviour depending on what happened to be built at the same time. Add terminating empty entry to the list of IDs. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15pasemi_mac: Interrupt ack fixesOlof Johansson
Interrupt ack fixes Fix the packet count resets at interrupt time, using the cacheable packet count status to set number of processed/received packets, since the ack count is the cumulative number of packets processed, and not incremental. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15pasemi_mac: Fix register definesolof@lixom.net
Some shift values were obviously wrong. Fix them to correspond with the masks. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgartLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] Fix wrong ID in via-agp.c
2007-05-15Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Correct revision mask for powernow-k8 [CPUFREQ] powernow-k7: fix MHz rounding issue with perflib [CPUFREQ] Support rev H AMD64s in powernow-k8
2007-05-15ll_rw_blk: fix gcc 4.2 warning on current_io_context()Jens Axboe
current_io_context() is both static and exported with EXPORT_SYMBOL(). As there are no users outside of ll_rw_blk.c itself, just kill the export. Problem reported by Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IPoIB/cm: Optimize stale connection detection IB/mthca: Set cleaned CQEs back to HW ownership when cleaning CQ IB/mthca: Fix posting >255 recv WRs for Tavor RDMA/cma: Add check to validate that cm_id is bound to a device RDMA/cma: Fix synchronization with device removal in cma_iw_handler RDMA/cma: Simplify device removal handling code IB/ehca: Disable scaling code by default, bump version number IB/ehca: Beautify sysfs attribute code and fix compiler warnings IB/ehca: Remove _irqsave, move #ifdef IB/ehca: Fix AQP0/1 QP number IB/ehca: Correctly set GRH mask bit in ehca_modify_qp() IB/ehca: Serialize hypervisor calls in ehca_register_mr() IB/ipath: Shadow the gpio_mask register IB/mlx4: Fix uninitialized spinlock for 32-bit archs mlx4_core: Remove unused doorbell_lock net: Trivial MLX4_DEBUG dependency fix.
2007-05-15SLUB: CONFIG_LARGE_ALLOCS must consider MAX_ORDER limitChristoph Lameter
Take MAX_ORDER into consideration when determining KMALLOC_SHIFT_HIGH. Otherwise we may run into a situation where we attempt to create general slabs larger than MAX_ORDER. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15i386: fix voyager buildJeremy Fitzhardinge
This adds an smp_ops for voyager, and hooks things up appropriately. This is the first baby-step to making subarch runtime switchable. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15i386: move common parts of smp into their own fileJeremy Fitzhardinge
Several parts of kernel/smp.c and smpboot.c are generally useful for other subarchitectures and paravirt_ops implementations, so make them available for reuse. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15Remove cpu hotplug defines for __INIT & __INITDATAPrarit Bhargava
After examining what was checked in and the code base I discovered that most of 86c0baf123e474b6eb404798926ecf62b426bf3a wasn't necessary anymore.... So here's a patch that reverts the last part of that changeset: Revert part of 86c0baf123e474b6eb404798926ecf62b426bf3a. The kernel has moved forward to a state where the original change is not necessary. After porting forward, this final version of the patch was applied and broke non-x86 architectures. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15Revert "MAINTAINERS: remove invalid list address for TPM"Stephen Rothwell
This reverts commit b6d1c9a44744224d83125a5a89c1a6cc4db27361. Others tell me that this address has worked for them, so I can only assume that I hit a glitch in the sourceforge mail system. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Kylene Hall <kjhall@us.ibm.com> Cc: Marcel Selhorst <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15clocksource: fix lock order in the resume pathThomas Gleixner
lockdep complains about the lock nesting of clocksource and watchdog lock in the resume path. Change the resume marker to a bit operation and remove the lock from this path. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15m68k: implement __clear_user()Geert Uytterhoeven
m68k: implement __clear_user(), which is needed by fs/signalfd.c Since we always let the MMU do all checking, clear_user() and __clear_user() are identical. The old clear_user() is renamed to __clear_user() for consistency. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15alpha: fix hard_smp_processor_id compile errorSimon Horman
"Remove hardcoding of hard_smp_processor_id on UP systems", 2f4dfe206a2fc07099dfad77a8ea2f4b4ae2140f in Linus' tree, moved the definition of hard_smp_processor_id linux/smp.h to asm/smp.h for UP systems. This causes a regression on Alpha. cc1: warnings being treated as errors arch/alpha/kernel/setup.c: In function 'setup_arch': arch/alpha/kernel/setup.c:506: warning: implicit declaration of function 'hard_smp_processor_id' make[1]: *** [arch/alpha/kernel/setup.o] error 1 make: *** [arch/alpha/kernel] error 2 By including asm/smp.h non-conditionally in asm/mmu_context.h the problem appears to be resolved. Cc: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Simon Horman <horms@verge.net.au> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 08:55:18 +0000