aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-09-04ALSA: ice1724 - limit channels for multi-channel playbackTakashi Iwai
Limit the available channels for multi-channel playback device to the real number of channels. Until now, always up to 8 channels are created, which are simply useless without the real outputs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-04ALSA: ice1724: Enable MIDI on TerraTec PHASE 22 and PHASE 28Vedran Miletic
Even though MIDI was fixed on ice1724 chips a while ago, it wasn't yet enabled for some cards as it didn't get enough testing. This was tested with MIDI keyboard on PHASE 22 and with looping back output to input and it works stable, so it's safe to enable it. Besides this, there are some more minor fixes, not exactly user visible: * added info about PHASE 28 (collected, as I don't have a card) * added info about TS22PCI and new revisions of PHASE 22 * disable 192k on PHASE 22 as AK4524 I2S doesn't support it * enable SPDIF reciever on PHASE 22 Signed-off-by: Vedran Miletic <rivanvx@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-04ALSA: ice1724: enable MIDI on Terratec Aureon 7.1 UniverseMaximilian Rehkopf
This enables MIDI on Terratec Aureon 7.1 Universe cards specifically. Apparently the other envy24ht-based Aureon cards do not have MIDI ports, hence I added a Universe specific eeprom array. The newer cards (Aureon 7.1 PCI / 5.1 PCI/Fun) have MIDI but use a CMI DSP so this driver does not concern them at all. Signed-off-by: Maximilian Rehkopf <otakon@gmx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: intel8x0: implement ac97_clock whitelistJaroslav Kysela
The AC97 clock detection is not accurate in some cases. This patch adds an initial whitelist for audio devices gathered from RedHat's bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=441087 As a side effect, white-listing might speedup kernel booting (AC97 clock measuring code is not activated). Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29sound: make OSS sound core optionalTejun Heo
sound/sound_core.c implements soundcore.ko and contains two parts - sound_class which is shared by both ALSA and OSS and device redirection support for OSS. It's always compiled when any sound support is enabled although it's necessary only when OSS (the actual one or emulation) is enabled. This is slightly wasteful and as device redirection always registers character device region for major 14, it prevents alternative implementation. This patch introduces a new config SOUND_OSS_CORE which is selected iff OSS support is actually necessary and build the OSS core part conditionally. If OSS is disabled, soundcore merely contains sound_class but leaving it that way seems to be the simplest approach as otherwise sound_class should be in ALSA core file if OSS is disabled but should be in soundcore if OSS is enabled. Also, there's also the user confusion factor. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: hda - Add support of Toshiba RX1Hiroshi Miura
Added the support of Toshiba RX1 laptop with ALC262 codec chip. Related ALSA bug#3386: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3386 Signed-off-by: Hiroshi Miura <miurahr@acm.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: ac97 - vt1618 7.1 Audio SupportJohn L. Utz III
1. Implement 7.1 Output for vt1618 codec. 2. Fix typos in comments from my previous 1617a patch. Signed-off-by: John L. Utz III <john.utz@dmx.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: remove obsolete *_FIRMARE_IN_KERNEL in isa/KconfigTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: ASoC: Convert DAPM pop time configuration to debugfsMark Brown
Pop time configuration is a debugging feature which shouldn't be used in normal operation so move it to debugfs where it is clearer. This also simplifies the code since debugfs provides standard facilities for exposing simple integer values to user space. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: hda - Add descriptions of missing model valuesTakashi Iwai
Added the descriptions of missing model values. Also, fixed the model strings of a few new models to a standard style. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: hda - Fix VIA recording problemJoseph Chan
Add a workaround for bad DMA-position reporting on VIA chipset. Signed-off-by: Joseph Chan <josephchan@via.com.tw> [modified and cleaned up by tiwai] Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: ASoC: WM8903 I2C cleanupsMark Brown
Fix a few issues identified by Jean Delvare: - Add missing newline to error display. - Return an error when we fail to locate the I2C adaptor. - Remove the static wm8903_i2c_device Jean suggested, it's redundant. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: ASoC: Add missing new-line at end of stringsJean Delvare
Two warning messages lack their trailing new-line, add it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: hda - Add more ALC662/663 codec supportKailang Yang
- Add support for ECS (1019:9087) - Delete G71V record from alc662_cfg_tbl[] The PCI SubsystemID was the same with M70V - Add more ASUS notebook support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: hda - support more ALC888 devicesKailang Yang
- Add Lenovo Sky support (17aa:101d) - Add ASUS M90V support (1043:8317) - Add ASUS Eee 1601 support (1043:835f) Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: hda - Add support of Quanta FL1Kailang Yang
Added the support of Quanta FL1 with ALC269 code chip. Also a bit space clean-ups. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: hda - Add support of Acer Aspire OneKailang Yang
Added the support of Acer Aspire One with ALC269 codec chip. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: hda - Add support of Toshiba S06Kailang Yang
Added the support of Toshiba S06 with ALC262 codec chip. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: hda - Add support of HP DC7600Kailang Yang
Fixed the support of HP DC7600 with ALC260, which was formerly handled as model=hp-3013. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: hda - fix spaces in patch_realtek.cKailang Yang
Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: ASoC: Add WM8903 CODEC driverMark Brown
The WM8903 is a high performance ultra-low power stereo CODEC optimised for portable audio applications. Features include: * 5mW power consumption for DAC to headphone playback * Stereo DAC SNR 96dB typical, THD -86dB typical * Stereo ADC SNR 93dB typical, THD -80dB typical * Up to 3 single ended inputs per stereo channel * Up to 2 pseudo differential inputs per stereo channel * Up to 1 fully differential mic input per stereo channel * Digital Dynamic Range Controller (compressor/limiter) * Digital sidetone mixing Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: Cosmetic change: CA0106 on MSI K8N Diamond PLUS MotherboardJaroslav Kysela
Make ',' delimited with space as for other entries in table. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: wss_lib: do not mess mixer settings during probeKrzysztof Helt
Use the wss_dout function which does not mess shadowed register values during chip probing. Otherwise, user ends up with stupid mixer settings after driver loading. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: snd-ad1816a: add different TerraTec EWS64 S modelRene Herman
Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: ALS4000 driver work, step 2Andreas Mohr
- more register naming work - finally figured out that weird CR register stuff (and did I mention that I hate _really_ undecipherable open-coded values?) - fix handling of IRQ sharing in interrupt handler (hopefully properly, otherwise I'd be grateful to hear your pedantic comments ;) - add handy SPECS_PAGE references wherever useful - comments, cleanup - add me as module author Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: hda - Fix ALC269 capture sourceTakashi Iwai
ALC269 capture source wasn't properly set up. It's an independent MUX (0x23), not a source of ADC. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: via82xx - check continuous pages in buffer setupTakashi Iwai
Check continuous pages in the buffer set up so that the number of BDL is reduced. Also increased the max buffer size. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: via82xx - ignore buffer preallocation errorsTakashi Iwai
The errors at buffer preallocations aren't fatal and safe to ignore. The buffer will be allocated dynamically when opened. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: hda - check page continuityTakashi Iwai
Check the continuity of allocated pages to reduce the BDL size as much as possible so that it can use more than 1MB buffers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: Allocate larger pages in sgbufTakashi Iwai
Most hardwares have limited buffer-descriptor table length. This also restricts the max buffer size of the sound driver. For example, snd-hda-intel has 1MB buffer size limit, and this is because it can have at most 256 BDL entries. For supporting larger buffers, we need to allocate larger pages even for sg-buffers. This patch changes the sgbuf allocation code to try to allocate larger pages first. At each head of the allocated pages, the number of allocated pages is stored in the lowest bits of the corresponding entry of the table addr field. This change isn't visible as long as the driver uses snd_sgbuf_get_addr() helper. Also, the patch adds a new function, snd_pcm_sgbuf_get_chunk_size(). This returns the size of the chunk on continuous pages starting at the given position offset. If the chunk reaches to a non-continuous page, it returns the size to the boundary. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: Fix allocation size calculation in snd_dma_alloc_pages_fallback()Takashi Iwai
snd_dma_alloc_pages_fallback() always tries to reduce the size in a half, but it's not good when the given size isn't a power-of-two. Check it first then try to align. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: Clean up SG-buffer helper functions and macrosTakashi Iwai
Clean up SG-buffer helper functions and macros. Helpers take substream as arguments now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: revo51: add headphone outputAlexander Beregalov
It is ALSA bug #1754. D6 bit in 02 register is PW4. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: hda - Create beep control on ALC269 codecTakashi Iwai
ALC269 codec has a beep, but it was not used, so far. Create a beep control appropriately. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: aoa - Remove duplicate assignment of SNDRV_PCM_FMTBIT_S{16,24}_BE bitsRoel Kluin
Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: opl3sa2: replace nd_opl3sa2_info_xxx() with snd_wss_info_xxx()Krzysztof Helt
Replace snd_opl3sa2_info_xxx() with snd_wss_info_xxx(). Drop check of card->private_data which cannot be NULL if card is not NULL (spotted by Rene Herman). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: als4000 - Code clean upAndreas Mohr
- use specs-derived register name enums instead of open-coded numeric values, for better understanding of things - fix naming confusion ("gcr" was _NOT_ the GCR register stuff, but instead the io _base_ which has multiplexed _access_ to GCR config space, at _sub_ registers 0x08 and 0x0c) - add FIXME comments about a race condition and MPU401 features Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: Update MAINTAINERSTakashi Iwai
Added tiwai to MAINTAINERS (per request of akpm) Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25sound: oss: remove driver for SGI HAL2 audio deviceThomas Bogendoerfer
With the restructering of the indy button handling the old OSS HAL2 driver got broken. Since there is a new ALSA driver for HAL2, the experimental OSS driver is obsolete and will be removed by this patch. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: hda - disable delayed period-ack with bdl_pos_adj=0Takashi Iwai
When bdl_pos_adj=0 is given, disable the position-check and the delayed period update mechanism. Usually bdl_pos_adj=0 is set only for the debugging purpose on really broken hardwares. It's better to disable the extra complexity in such a case. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: wss_lib: snd_wss_calibrate_mute improvementKrzysztof Helt
Mute sound by setting mute bit without setting volume to 0. It makes both source code and binary shorter. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: hda - Add AD1882A codec supportTakashi Iwai
Added the basic support of AD1882A codec chip. It's almost compatible with AD1882, but with a digital mic and some differences in connections. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: opl3sa2: drop snd_card pointer from the snd_opl3sa2 structureKrzysztof Helt
Remove card pointer from the snd_opl3sa2 structure and break circular reference snd_card->snd_opl3sa2->snd_card. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: hda - set up HDMI channelsTakashi Iwai
Set up channel information for HDMI widgets. This will allow LPCM with multiple channels supported on some HDMI devices. TODO: It still doesn't check ELD and doesn't change PCM parameters dynamically. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: hda - print a few HDMI information in procTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: hda - Add definitions of HDMI-related verbsTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-19mpu401: reindent misindented spinlockIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-15ALSA: release v1.0.18rc1Jaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-15ALSA: dummy driver - do not use assignment in if conditionJaroslav Kysela
checkpatch.pl does not like assignment in if condition Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-15sound: Fix esoteric double free in the dummy sound driver.Daniel THOMPSON
The dummy driver uses runtime->private_free but still frees its pcm structures on error paths. This is esoteric because the error paths in question are unreachable. Thus the bug is only a problem when someone copies this code into other drivers. Signed-off-by: Daniel R Thompson <daniel.thompson@st.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 13:57:11 +0000