aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-04-248390p: fix build breakageAlexander Beregalov
Fix this build error caused by 362b76edb789 "8390p: Get rid of init_module/cleanup_module" drivers/net/8390p.c:94:19: error: invalid suffix "p_init_module" on integer constant drivers/net/8390p.c:94: error: expected identifier or '(' before numeric constant drivers/net/8390p.c:99:20: error: invalid suffix "p_cleanup_module" on integer constant Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23af_iucv: Fix merge.Ursula Braun
From: Ursula Braun <ubraun@linux.vnet.ibm.com> net/iucv/af_iucv.c in net-next-2.6 is almost correct. 4 lines should still be deleted. These are the remaining changes: Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/iucv/af_iucv.c
2009-04-23af_iucv: New socket option for setting IUCV MSGLIMITsHendrik Brueckner
The SO_MSGLIMIT socket option modifies the message limit for new IUCV communication paths. The message limit specifies the maximum number of outstanding messages that are allowed for connections. This setting can be lowered by z/VM when an IUCV connection is established. Expects an integer value in the range of 1 to 65535. The default value is 65535. The message limit must be set before calling connect() or listen() for sockets. If sockets are already connected or in state listen, changing the message limit is not supported. For reading the message limit value, unconnected sockets return the limit that has been set or the default limit. For connected sockets, the actual message limit is returned. The actual message limit is assigned by z/VM for each connection and it depends on IUCV MSGLIMIT authorizations specified for the z/VM guest virtual machine. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23af_iucv: cleanup and refactor recvmsg() EFAULT handlingHendrik Brueckner
If the skb cannot be copied to user iovec, always return -EFAULT. The skb is enqueued again, except MSG_PEEK flag is set, to allow user space applications to correct its iovec pointer. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23af_iucv: Provide new socket type SOCK_SEQPACKETHendrik Brueckner
This patch provides the socket type SOCK_SEQPACKET in addition to SOCK_STREAM. AF_IUCV sockets of type SOCK_SEQPACKET supports an 1:1 mapping of socket read or write operations to complete IUCV messages. Socket data or IUCV message data is not fragmented as this is the case for SOCK_STREAM sockets. The intention is to help application developers who write applications or device drivers using native IUCV interfaces (Linux kernel or z/VM IUCV interfaces). Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23af_iucv: Modify iucv msg target class using control msghdrHendrik Brueckner
Allow 'classification' of socket data that is sent or received over an af_iucv socket. For classification of data, the target class of an (native) iucv message is used. This patch provides the cmsg interface for iucv_sock_recvmsg() and iucv_sock_sendmsg(). Applications can use the msg_control field of struct msghdr to set or get the target class as a "socket control message" (SCM/CMSG). Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23af_iucv: Support data in IUCV msg parameter lists (IPRMDATA)Hendrik Brueckner
The patch allows to send and receive data in the parameter list of an iucv message. The parameter list is an arry of 8 bytes that are used by af_iucv as follows: 0..6 7 bytes for socket data and 7 1 byte to store the data length. Instead of storing the data length directly, the difference between 0xFF and the data length is used. This convention does not interfere with the existing use of PRM messages for shutting down the send direction of an AF_IUCV socket (shutdown() operation). Data lenghts greater than 7 (or PRM message byte 8 is less than 0xF8) denotes to special messages. Currently, the special SEND_SHUTDOWN message is supported only. To use IPRM messages, both communicators must set the IUCV_IPRMDATA flag during path negotiation, i.e. in iucv_connect() and path_pending(). To be compatible to older af_iucv implementations, sending PRM messages is controlled by the socket option SO_IPRMDATA_MSG. Receiving PRM messages does not depend on the socket option (but requires the IUCV_IPRMDATA path flag to be set). Sending/Receiving data in the parameter list improves performance for small amounts of data by reducing message_completion() interrupts and memory copy operations. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23af_iucv: add sockopt() to enable/disable use of IPRM_DATA msgsHendrik Brueckner
Provide the socket operations getsocktopt() and setsockopt() to enable/disable sending of data in the parameter list of IUCV messages. The patch sets respective flag only. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23af_iucv: sync sk shutdown flag if iucv path is quiescedHendrik Brueckner
If the af_iucv communication partner quiesces the path to shutdown its receive direction, provide a quiesce callback implementation to shutdown the (local) send direction. This ensures that both sides are synchronized. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23iucv: provide second per-cpu IUCV command parameter blockUrsula Braun
Some of the IUCV commands can be invoked in interrupt context. Those commands need a different per-cpu IUCV command parameter block, otherwise they might overwrite an IUCV command parameter of a not yet finished IUCV command invocation in process context. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-22netfilter: ctnetlink: fix gcc warning during compilationPablo Neira Ayuso
This patch fixes a (bogus?) gcc warning during compilation: net/netfilter/nf_conntrack_netlink.c:1234: warning: 'helpname' may be used uninitialized in this function net/netfilter/nf_conntrack_netlink.c:991: warning: 'helpname' may be used uninitialized in this function In fact, helpname is initialized by ctnetlink_parse_help() so I cannot see a way to use it without being initialized. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-228390p: Get rid of init_module/cleanup_moduleMateusz Mandera
This trivial patch just "gets rid of" init_module and cleanup_module from drivers/net/8390p.c Signed-off-by: Mateusz Mandera <ormi.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-22net/netrom: Fix socket lockingJean Delvare
Patch "af_rose/x25: Sanity check the maximum user frame size" (commit 83e0bbcbe2145f160fbaa109b0439dae7f4a38a9) from Alan Cox got locking wrong. If we bail out due to user frame size being too large, we must unlock the socket beforehand. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-22e1000/e1000e/igb/ixgb: do not use netif_wake_queue un-necessarilyJesse Brandeburg
It was pointed out that the Intel wired ethernet drivers do not need to wake the tx queue since netif_carrier_on/off will take care of the qdisc management in order to guarantee the correct handling of the transmit routine enable state. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-22netlabel: Always remove the correct address selectorPaul Moore
The NetLabel address selector mechanism has a problem where it can get mistakenly remove the wrong selector when similar addresses are used. The problem is caused when multiple addresses are configured that have different netmasks but the same address, e.g. 127.0.0.0/8 and 127.0.0.0/24. This patch fixes the problem. Reported-by: Etienne Basset <etienne.basset@numericable.fr> Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: James Morris <jmorris@namei.org> Tested-by: Etienne Basset <etienne.basset@numericable.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-22ucc_geth.c: Fix upsmr setting in RMII modeHeiko Schocher
If using the UCC on a MPC8360 in RMII mode, don;t set UCC_GETH_UPSMR_RPM bit in the upsmr register. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-228139too: fix HW initial flowJianjun kong
While ifconfig eth0 up kernel calls open() of 8139 driver(8139too.c). In rtl8139_hw_start() of rtl8139_open(), 8139 driver enable RX before setting up the DMA buffer address. In this interval where RX was enabled and DMA buffer address is not yet set up, any incoming broadcast packet would be send to a strange physical address: 0x003e8800 which is the default value of DMA buffer address. Unfortunately, this address is used by Linux kernel. So kernel panics. This patch fix it by setting up DMA buffer address before RX enabled and everything is fine even under broadcast packets attack. Signed-off-by: Jonathan Lin <jon.lin@vatics.com> Signed-off-by: Amos Kong <jianjun@zeuux.org> Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21af_iucv: Fix race when queuing incoming iucv messagesHendrik Brueckner
AF_IUCV runs into a race when queuing incoming iucv messages and receiving the resulting backlog. If the Linux system is under pressure (high load or steal time), the message queue grows up, but messages are not received and queued onto the backlog queue. In that case, applications do not receive any data with recvmsg() even if AF_IUCV puts incoming messages onto the message queue. The race can be avoided if the message queue spinlock in the message_pending callback is spreaded across the entire callback function. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21af_iucv: Test additional sk states in iucv_sock_shutdownHendrik Brueckner
Add few more sk states in iucv_sock_shutdown(). Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21af_iucv: Reject incoming msgs if RECV_SHUTDOWN is setHendrik Brueckner
Reject incoming iucv messages if the receive direction has been shut down. It avoids that the queue of outstanding messages increases and exceeds the message limit of the iucv communication path. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flagHendrik Brueckner
If iucv_sock_recvmsg() is called with MSG_PEEK flag set, the skb is enqueued twice. If the socket is then closed, the pointer to the skb is freed twice. Remove the skb_queue_head() call for MSG_PEEK, because the skb_recv_datagram() function already handles MSG_PEEK (does not dequeue the skb). Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21af_iucv: consider state IUCV_CLOSING when closing a socketUrsula Braun
Make sure a second invocation of iucv_sock_close() guarantees proper freeing of an iucv path. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21sa1100_ir: fix build breakageAlexander Beregalov
Fix simple typo. Caused by commit a1de966682551debbe690672e760487cc555c05f ("irda/sa1100_ir: convert to net_device_ops"). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21iwlwifi: DMA fixesReinette Chatre
A few issues wrt DMA were uncovered when using the driver with swiotlb. - driver should not use memory after it has been mapped - iwl3945's RX queue management cannot use all of iwlagn because the size of the RX buffer is different. Revert back to using iwl3945 specific routines that map/unmap memory. - no need to "dma_syn_single_range_for_cpu" followed by pci_unmap_single, we can just call pci_unmap_single initially - only map the memory area that will be used by device. this is especially relevant to the mapping of iwl_cmd. we should not map the entire structure because the meta data at the beginning of structure contains the address to be used later for unmapping. If the address to be used for unmapping is stored in mapped data it creates a problem. - ensure that _if_ memory needs to be modified after it is mapped that we call _sync_single_for_cpu first, and then release it back to device with _sync_single_for_device - we mapped the wrong length of data for host commands, with mapped length differing with length provided to device, fix that. Thanks to Jason Andryuk <jandryuk@gmail.com> for significant bisecting help to find these issues. This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1964 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Jason Andryuk <jandryuk@gmail.com> Tested-by: Ben Gamari <bgamari@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-21iwlwifi: add debugging for TX pathReinette Chatre
When debugging TX issues it is helpful to know the seq nr of the frame being transmitted. The seq nr is printed as part of ucode's log informing us which frame is being processed. Having this information printed in driver log makes it easy to match activities between driver and firmware. Also make possible to print TX flags directly. These are already printed as part of entire TX command, but having it printed directly in cpu format makes it easier to look at. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-21mwl8: fix build warning.Rami Rosen
This patch fixes a build warning in mwl8.c. (Marvell TOPDOG wireless driver) The warning it fixes is: "large integer implicitly truncated to unsigned type." The rx_ctrl member of the mwl8k_rx_desc struct is 8 bit (__u8 ), whereas trying to assign it a 32 bit value (which is returned from cpu_to_le32()) causes the compiler to issue a truncation warning. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-21mac80211: fix alignment calculation bugJohannes Berg
When checking whether or not a given frame needs to be moved to be properly aligned to a 4-byte boundary, we use & 4 which wasn't intended, this code should check the lowest two bits. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-21mac80211: do not print WARN if config interfaceReinette Chatre
It is expected that config interface will always succeed as mac80211 will only request what driver supports. The exception here is when a device has rfkill enabled. At this time the rfkill state is unknown to mac80211 and config interface can fail. When this happens we deal with this error instead of printing a WARN. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-21iwl3945: use cancel_delayed_work_sync to cancel rfkill_pollReinette Chatre
Users reported lockup with work still trying to run after module has been unloaded. http://thread.gmane.org/gmane.linux.kernel.wireless.general/30594/focus=30601 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reported-by: TJ <ubuntu@tjworld.net> Reported-by: Huaxu Wan <huaxu.wan@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-21iwlwifi: fix EEPROM validation mask to include OTP only devicesJay Sternberg
Fix the bug where some revisions of 6000 series hardware cannot be used. Later versions of 6000 series have the EEPROM replaced by OTP. For these devices to be used we need to expand valid EEPROM mask. Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-21tun: fix tun_chr_aio_write so that aio worksMichael S. Tsirkin
aio_write gets const struct iovec * but tun_chr_aio_write casts this to struct iovec * and modifies the iovec. As a result, attempts to use io_submit to send packets to a tun device fail with weird errors such as EINVAL. Since tun is the only user of skb_copy_datagram_from_iovec, we can fix this simply by changing the later so that it does not touch the iovec passed to it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tun: fix tun_chr_aio_read so that aio worksMichael S. Tsirkin
aio_read gets const struct iovec * but tun_chr_aio_read casts this to struct iovec * and modifies the iovec. As a result, attempts to use io_submit to get packets from a tun device fail with weird errors such as EINVAL. Fix by using the new skb_copy_datagram_const_iovec. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21net: skb_copy_datagram_const_iovec()Michael S. Tsirkin
There's an skb_copy_datagram_iovec() to copy out of a paged skb, but it modifies the iovec, and does not support starting at an offset in the destination. We want both in tun.c, so let's add the function. It's a carbon copy of skb_copy_datagram_iovec() with enough changes to be annoying. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21atmel: fix netdev ops conversionJohannes Berg
sparse says: drivers/net/wireless/atmel.c:1501:3: warning: Initializer entry defined twice drivers/net/wireless/atmel.c:1505:3: also defined here and it's correct; atmel has its own ndo_change_mtu and shouldn't use eth_change_mtu. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21ucc_geth: Move freeing of TX packets to NAPI contextJoakim Tjernlund
This will make the system alot more responsive while ping flooding the ucc_geth ethernet interface. Also set NAPI weight to 64 as this is a common value. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCMKen Kawasaki
pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21rtl8139: unify the struct's nameJianjun Kong
unify the struct's name of "struct rtl8139_private *np" to "struct rtl8139_private *tp" most of them like this: struct rtl8139_private *tp = netdev_priv(dev); Signed-off-by: Amos Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21net: factor out ethtool invocation of vlan/macvlan driversPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21usb driver for intellon int51x1 based PLC like devolo dlan duoPeter Holik
usb driver for intellon int51x1 based PLC like devolo dlan duo with improvements suggested by the guys of the mailinglist: - name and prefix with int51x1 (Florian Fainelli) - use conversion functions cpu_to_le16 / le16_to_cpu (Oliver Neukum) - use pskb_may_pull instead of skb->len (Ilpo Järvinen) - better code in tx_fixup (Ilpo Järvinen) - use gotos for error handling (Ilpo Järvinen) - better description (Jon Smirl) Signed-off-by: Peter Holik <peter@holik.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21export usbnet_get_ethernet_addr from usbnet and fixed cdc_ether.cPeter Holik
because of using the same function get_ethernet_addr as cdc_ether.c i export usbnet_get_ethernet_addr from usbnet and fixed cdc_ether (suggested by Oliver Neukum). Signed-off-by: Peter Holik <peter@holik.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21mlx4_en: Fix cleanup if workqueue create in mlx4_en_add() failsRoland Dreier
If creating a workqueue fails, don't jump to the error path where that same workqueue is destroyed, since destroy_workqueue() can't handle a NULL pointer. This was spotted by the Coverity checker (CID 2617). Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21mlx4_en: Move to SW counters for total bytes and packetsYevgeny Petrilin
The per ring counters are implemented in SW. Now moving to have the total counters as the sum of all rings. This way the numbers will always be consistent and we no longer depend on HW buffer size limitations for those counters that can be insufficient in some cases. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21mlx4_en: use NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM for tx csum at initializationYevgeny Petrilin
The former usage was to set the NETIF_F_HW_CSUM flag which is not used in get_tx_csum. It caused Ethtool to show tx checksum as "on" even though it was turned off in previous operation. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21mlx4_en: Assign dummy event handler for TX queueYevgeny Petrilin
The low level driver always assumes this handler exists. The lack of it could cause kernel panic Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21mlx4_en: Fix a race at restart taskYevgeny Petrilin
The query whether the port is up or not should be done at the execution of the restart task and not when it is queued. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21mlx4_en: Fix error handling while activating RX ringsYevgeny Petrilin
In case of failure of either srq creation or page allocation, the cleanup code handled the failed ring as well, and tried to destroy resources that where not allocated. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tg3: Update version to 3.99Matt Carlson
This patch updates the tg3 version to 3.99. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tg3: Restore LAA sooner in shutdown sequenceMatt Carlson
After a shutdown reset, the LAA needs to be restored before posting the post-reset signature in shared memory. If the LAA is not restored before then, the bootcode will assume the factory default MAC address and WOL will not work with the LAA. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tg3: Limit CLKREQ fix to A[01] of 57780 asic revMatt Carlson
This patch restricts the CLKREQ bugfix to the A0 and A1 revisions of 57780 ASIC rev chips. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 06:36:47 +0000