aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-04-12x86: add linux kernel support for YMM stateSuresh Siddha
Impact: save/restore Intel-AVX state properly between tasks Intel Advanced Vector Extensions (AVX) introduce 256-bit vector processing capability. More about AVX at http://software.intel.com/sites/avx Add OS support for YMM state management using xsave/xrstor infrastructure to support AVX. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1239402084.27006.8057.camel@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12x86: fix wrong section of pat_disable & make it staticMarcin Slusarz
pat_disable cannot be __cpuinit anymore because it's called from pat_init and the callchain looks like this: pat_disable [cpuinit] <- pat_init <- generic_set_all <- ipi_handler <- set_mtrr <- (other non init/cpuinit functions) WARNING: arch/x86/mm/built-in.o(.text+0x449e): Section mismatch in reference from the function pat_init() to the function .cpuinit.text:pat_disable() The function pat_init() references the function __cpuinit pat_disable(). This is often because pat_init lacks a __cpuinit annotation or the annotation of pat_disable is wrong. Non CONFIG_X86_PAT version of pat_disable is static inline, so this version can be static too (and there are no callers outside of this file). Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <49DFB055.6070405@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12x86: Fix section mismatches in mpparseRakib Mullick
Impact: fix section mismatch In arch/x86/kernel/mpparse.c, smp_reserve_bootmem() has been called and also refers to a function which is in .init section. Thus causes the first warning. And check_irq_src() also requires an __init, because it refers to an .init section. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <b9df5fa10904102004g51265d9axc8d07278bfdb6ba0@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12tracing/filters: return proper error code when writing filter fileLi Zefan
- propagate return value of filter_add_pred() to the user - return -ENOSPC but not -ENOMEM or -EINVAL when the filter array is full Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <49E04CF0.3010105@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12tracing/filters: allow user input integer to be oct or hexLi Zefan
Before patch: # echo 'parent_pid == 0x10' > events/sched/sched_process_fork/filter # cat sched/sched_process_fork/filter parent_pid == 0 After patch: # cat sched/sched_process_fork/filter parent_pid == 16 Also check the input more strictly. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <49E04C53.4010600@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12tracing/filters: fix NULL pointer dereferenceLi Zefan
Try this, and you'll see NULL pointer dereference bug: # echo -n 'parent_comm ==' > sched/sched_process_fork/filter Because we passed NULL ptr to simple_strtoull(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <49E04C43.1050504@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12tracing/filters: NIL-terminate user input filterLi Zefan
Make sure messages from user space are NIL-terminated strings, otherwise we could dump random memory while reading filter file. Try this: # echo 'parent_comm ==' > events/sched/sched_process_fork/filter # cat events/sched/sched_process_fork/filter parent_comm == � Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <49E04C32.6060508@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-11Revert "ACPI battery: fix async boot oops"Linus Torvalds
This reverts commit 5d38258ec026921a7b266f4047ebeaa75db358e5, since the underlying problem got fixed properly in the previous commit ("async: Fix module loading async-work regression"). Cc: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-11async: Fix module loading async-work regressionLinus Torvalds
Several drivers use asynchronous work to do device discovery, and we synchronize with them in the compiled-in case before we actually try to mount root filesystems etc. However, when compiled as modules, that synchronization is missing - the module loading completes, but the driver hasn't actually finished probing for devices, and that means that any user mode that expects to use the devices after the 'insmod' is now potentially broken. We already saw one case of a similar issue in the ACPI battery code, where the kernel itself expected the module to be all done, and unmapped the init memory - but the async device discovery was still running. That got hacked around by just removing the "__init" (see commit 5d38258ec026921a7b266f4047ebeaa75db358e5 "ACPI battery: fix async boot oops"), but the real fix is to just make the module loading wait for all async work to be completed. It will slow down module loading, but since common devices should be built in anyway, and since the bug is really annoying and hard to handle from user space (and caused several S3 resume regressions), the simple fix to wait is the right one. This fixes at least http://bugzilla.kernel.org/show_bug.cgi?id=13063 but probably a few other bugzilla entries too (12936, for example), and is confirmed to fix Rafael's storage driver breakage after resume bug report (no bugzilla entry). We should also be able to now revert that ACPI battery fix. Reported-and-tested-by: Rafael J. Wysocki <rjw@suse.com> Tested-by: Heinz Diehl <htd@fancy-poultry.org> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-11docbook: make cleandocsRandy Dunlap
Add a 'make cleandocs' target to clean up all generated DocBook files. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11kbuild: fix spurious initramfs rebuildMaxime Bizon
When gen_initramfs_list is used to generate make dependencies, it includes symbolic links, for which make tracks the link target. Any change to that target will cause an initramfs rebuild, even if the symlink points to something outside of the initramfs directory. If the target happens to be /tmp, the rebuild occurs for each kernel build, since gen_initramfs_list uses mktemp... Proposed way to fix it is to omit symbolic links from generated dependencies, but this has a small drawback: changing perm/owner on a symlink will go unnoticed. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11Documentation: explain the difference between __bitwise and __bitwise__Sam Ravnborg
Simply added explanation from Al Viro in the following mail: http://lkml.indiana.edu/hypermail/linux/kernel/0802.2/3164.html Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11kbuild: make it possible for the linker to discard local symbols from vmlinuxDavid Howells
Make it possible for the linker to discard local symbols from vmlinux as they cause vmlinux to balloon when CONFIG_KALLSYMS=y and they cause dump_stack() and get_wchan() to produce useless information under some circumstances. With this we add a config option (CONFIG_STRIP_ASM_SYMS) that will cause the build to supply -X to the linker to tell it to strip temporary local symbols. This doesn't seem to cause gdb any problems. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11kbuild: remove pointless strdup() on arguments passed to new_module() in modpostJan Beulich
new_module() itself already calls strdup() on its modname parameter. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11kbuild: fix a few typos in top-level MakefileKirill Smelkov
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Acked-by: Dmitry Gryazin <gdu@mns.spb.ru> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11kbuild: introduce destination-y for exported headersSam Ravnborg
xtensa and arm have asked for a possibility to export headers and locate them in a specific directory when exported. Introduce destiantion-y to support this. This patch in additiona adds some limited documentation for the variables used for exported headers. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Oskar Schirmer <os@emlix.com> Cc: Mikael Starvik <mikael.starvik@axis.com>
2009-04-11kbuild: use git svn instead of git-svn in setlocalversionPeter Korsgaard
Use the correct git <subcmd> syntax instead of the deprecated git-<subcmd>. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11kconfig: fix update-po-config to accect backslash in inputSam Ravnborg
Massimo Maiurana reported (slightly edited): ===== In latest 2.6.29 "make update-po-config" fails at msguniq invocation with an "invalid control sequence" error. The offending string is the following, and it's located in drivers/staging/panel/Kconfig:72: "'\e[L' which are specific to the LCD, and a few ANSI codes. The" looks to me like gettext expects strings in printf format, so in this case it thinks "\e" is a control sequence but doesn't recognise it as a valid one. A valid solution would be to tell kxgettext to automatically escape this kind of strings in the */config.pot he produces, so that msguniq would not complain. ===== This patch implements the suggested escaping. Reported-by: Massimo Maiurana <maiurana@gmail.com> Tested-by: Massimo Maiurana <maiurana@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11kbuild: fix option processing for -I in headerdepUwe Kleine-König
-I takes an argument. Without this change only a 1 is added to @opt_include which is not helpful. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-10intel-iommu: Avoid panic() for DRHD at address zero.David Woodhouse
If the BIOS does something obviously stupid, like claiming that the registers for the IOMMU are at physical address zero, then print a nasty message and abort, rather than trying to set up the IOMMU and then later panicking. It's becoming more and more obvious that trusting this stuff to the BIOS was a mistake. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-10Remove stale include/asm-mn10300/.gitignore fileLinus Torvalds
Requested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-10MAINTAINERS - Update MN10300 patternsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - Update frv arch patternsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10scripts/get_maintainer.pl - Allow multiple files on command lineJoe Perches
Improve handling of "by:" signoffs Sorting and frequency checks are done by name/email, not by "by:" tag. Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - Update Freescale sound patternsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - Add additional patternsJoe Perches
for sections: FINTEK F75375S HARDWARE MONITOR PCA9532 LED DRIVER S390 ZCRYPT DRIVER SERIAL ATA (SATA) SUBSYSTEM TMIO MMC DRIVER Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - Add missing "/" to some pattern directoriesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - Update DRIVER CORE patternsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - Update M68K patternsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - Coalesce sections "DVB" and "Video for Linux"Joe Perches
Creating new section MEDIA INPUT INFRASTRUCTURE Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - Remove cyblafb frame buffer no longer in treeJoe Perches
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - Remove x86/Voyager no longer in treeJoe Perches
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - Update FPU Emulator contact address and web pageJoe Perches
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - i2c_tiny_usb T: should be W:Joe Perches
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - Add Linus Torvalds' gitJoe Perches
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - standardize "T: git urls"Joe Perches
Various forms of "T: git" entries exist: git kernel.org:/ git kernel.org/ git://git.kernel.org/ Standardize on "T: git git://git.kernel.org/<foo>" where appropriate Fix a few bad git path entries Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - Remove HP Fibre Channel HBA no longer in treeJoe Perches
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - Standardize styleJoe Perches
Use one email address per line Remove file patterns from section names Use tab after : Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10MAINTAINERS - Add file patternsJoe Perches
Better description of file pattern tag "F:" Add file exclusion tag "X:" Add patterns to sections Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10Add scripts/get_maintainer.plJoe Perches
A script to parse file pattern information in MAINTAINERS and return selected information about a file or patch usage: scripts/get_maintainer.pl [options] patchfile scripts/get_maintainer.pl [options] -f file version: 0.14 MAINTAINERS field selection options: --email => print email address(es) if any --git => include git "*-by:" signers in commit count order --git-chief-penguins => include (Linus Torvalds) --git-min-signatures => number of signatures required (default: 1) --git-max-maintainers => maximum maintainers to add (default: 5) --git-since => git history to use (default: 1-year-ago) --m => include maintainer(s) if any --n => include name 'Full Name <addr@domain.tld>' --l => include list(s) if any --s => include subscriber only list(s) if any --scm => print SCM tree(s) if any --status => print status if any --subsystem => print subsystem name if any --web => print website(s) if any Output type options: --separator [, ] => separator for multiple entries on 1 line --multiline => print 1 entry per line Default options: [--email --git --m --n --l --multiline] Other options: --version => show version --help => show this help information Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Pavel Machek <pavel@ucw.cz>
2009-04-10percpu: unbreak alpha percpuTejun Heo
For the time being, move the generic percpu_*() accessors to linux/percpu.h. asm-generic/percpu.h is meant to carry generic stuff for low level stuff - declarations, definitions and pointer offset calculation and so on but not for generic interface. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10Merge git://git.infradead.org/~dwmw2/firmware-2.6Linus Torvalds
* git://git.infradead.org/~dwmw2/firmware-2.6: qla1280: Fix off-by-some error in firmware loading. Add README.AddingFirmware file. Basically telling people not to. firmware: Remove newly-added slicoss and sxg firmware images firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw ALSA: wavefront - Always use request_firmware() Remove fdump tool for av7110 firmware firmware: convert av7110 driver to request_firmware() Partially revert "V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card" Revert "fix modules_install via NFS" Add-add conflicts in firmware/WHENCE fixed manually
2009-04-10x86: fix set_fixmap to use phys_addr_tMasami Hiramatsu
Impact: fix kprobes crash on 32-bit with RAM above 4G Use phys_addr_t for receiving a physical address argument instead of unsigned long. This allows fixmap to handle pages higher than 4GB on x86-32. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: systemtap-ml <systemtap@sources.redhat.com> Cc: Gary Hade <garyhade@us.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <49DE3695.6040800@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: Separate out the proc- and unit-specific header directories from the general Move arch headers from include/asm-mn10300/ to arch/mn10300/include/asm/.
2009-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frvLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv: FRV: Move to arch/frv/include/asm/ FRV: Fix indentation errors to keep git-am happy when moving arch header files
2009-04-10ftrace: Output REC->var instead of __entry->var for trace formatZhaolei
print fmt: "irq=%d return=%s", __entry->irq, __entry->ret ? \"handled\" : \"unhandled\" "__entry" should be convert to "REC" by __stringify() macro. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <49DC679D.2090901@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10Make __stringify support variable argument macros tooZhaolei
For example: __stringify(__entry->irq, __entry->ret) will now convert it to: "REC->irq, REC->ret" It also still supports single arguments as the old macro did. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <49DC6751.30308@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10Separate out the proc- and unit-specific header directories from the generalDavid Howells
MN10300 arch headers and place them instead in the same directories as contain the .c files for the processor and unit implementations. This permits the symlinks include/asm/proc and include/asm/unit to be dispensed with. This does, however, require that #include <asm/proc/xxx.h> be converted to #include <proc/xxx.h> and similarly for asm/unit -> unit. Signed-off-by: David Howells <dhowells@redhat.com>
2009-04-10Move arch headers from include/asm-mn10300/ to arch/mn10300/include/asm/.David Howells
Signed-off-by: David Howells <dhowells@redhat.com>
2009-04-10x86: Document get_user_pages_fast()Andy Grover
While better than get_user_pages(), the usage of gupf(), especially the return values and the fact that it can potentially only partially pin the range, warranted some documentation. Signed-off-by: Andy Grover <andy.grover@oracle.com> Cc: npiggin@suse.de Cc: akpm@linux-foundation.org LKML-Reference: <1239320729-3262-1-git-send-email-andy.grover@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-27 16:27:33 +0000