aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-05-10ocfs2: kobject/kset foobarRandy Dunlap
Fix gcc warning and Oops that it causes: fs/ocfs2/cluster/masklog.c:161: warning: assignment from incompatible pointer type [ 2776.204120] OCFS2 Node Manager 1.3.3 [ 2776.211729] BUG: spinlock bad magic on CPU#0, modprobe/4424 [ 2776.214269] lock: ffff810021c8fe18, .magic: ffffffff, .owner: /6394416, .owner_cpu: 0 [ 2776.217864] [ 2776.217865] Call Trace: [ 2776.219662] [<ffffffff803426c8>] spin_bug+0x9e/0xe9 [ 2776.221921] [<ffffffff803427bf>] _raw_spin_lock+0x23/0xf9 [ 2776.224417] [<ffffffff8051acf4>] _spin_lock+0x9/0xb [ 2776.226676] [<ffffffff8033c3b1>] kobject_shadow_add+0x98/0x1ac [ 2776.229367] [<ffffffff8033c4d0>] kobject_add+0xb/0xd [ 2776.231665] [<ffffffff8033c4df>] kset_add+0xd/0xf [ 2776.233845] [<ffffffff8033c5a6>] kset_register+0x23/0x28 [ 2776.236309] [<ffffffff8808ccb7>] :ocfs2_nodemanager:mlog_sys_init+0x68/0x6d [ 2776.239518] [<ffffffff8808ccee>] :ocfs2_nodemanager:o2cb_sys_init+0x32/0x4a [ 2776.242726] [<ffffffff880b80a6>] :ocfs2_nodemanager:init_o2nm+0xa6/0xd5 [ 2776.245772] [<ffffffff8025266c>] sys_init_module+0x1471/0x15d2 [ 2776.248465] [<ffffffff8033f250>] simple_strtoull+0x0/0xdc [ 2776.250959] [<ffffffff8020948e>] system_call+0x7e/0x83 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Mark Fasheh <mark.fasheh@oracle.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10early_pfn_to_nid needs to be __meminitStephen Rothwell
Since it is referenced by memmap_init_zone (which is __meminit) via the early_pfn_in_nid macro when CONFIG_NODES_SPAN_OTHER_NODES is set (which basically means PowerPC 64). This removes a section mismatch warning in those circumstances. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10AF_RXRPC: reduce debugging noiseDavid Howells
Reduce debugging noise generated by AF_RXRPC. Signed-off-by: David Howells <dhowells@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10AFS: further write support fixesDavid Howells
Further fixes for AFS write support: (1) The afs_send_pages() outer loop must do an extra iteration if it ends with 'first == last' because 'last' is inclusive in the page set otherwise it fails to send the last page and complete the RxRPC op under some circumstances. (2) Similarly, the outer loop in afs_pages_written_back() must also do an extra iteration if it ends with 'first == last', otherwise it fails to clear PG_writeback on the last page under some circumstances. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10AFS: write support fixesDavid Howells
AFS write support fixes: (1) Support large files using the 64-bit file access operations if available on the server. (2) Use kmap_atomic() rather than kmap() in afs_prepare_page(). (3) Don't do stuff in afs_writepage() that's done by the caller. [akpm@linux-foundation.org: fix right shift count >= width of type] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10add upper-32-bits macroAndrew Morton
We keep on getting "right shift count >= width of type" warnings when doing things like sector_t s; x = s >> 56; because with CONFIG_LBD=n, s is only 32-bit. Similar problems can occur with dma_addr_t's. So add a simple wrapper function which code can use to avoid this warning. The above example would become x = upper_32_bits(s) >> 24; The first user is in fact AFS. Cc: James Bottomley <James.Bottomley@SteelEye.com> Cc: "Cameron, Steve" <Steve.Cameron@hp.com> Cc: "Miller, Mike (OS Dev)" <Mike.Miller@hp.com> Cc: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10slub: support concurrent local and remote frees and allocs on a slabChristoph Lameter
Avoid atomic overhead in slab_alloc and slab_free SLUB needs to use the slab_lock for the per cpu slabs to synchronize with potential kfree operations. This patch avoids that need by moving all free objects onto a lockless_freelist. The regular freelist continues to exist and will be used to free objects. So while we consume the lockless_freelist the regular freelist may build up objects. If we are out of objects on the lockless_freelist then we may check the regular freelist. If it has objects then we move those over to the lockless_freelist and do this again. There is a significant savings in terms of atomic operations that have to be performed. We can even free directly to the lockless_freelist if we know that we are running on the same processor. So this speeds up short lived objects. They may be allocated and freed without taking the slab_lock. This is particular good for netperf. In order to maximize the effect of the new faster hotpath we extract the hottest performance pieces into inlined functions. These are then inlined into kmem_cache_alloc and kmem_cache_free. So hotpath allocation and freeing no longer requires a subroutine call within SLUB. [I am not sure that it is worth doing this because it changes the easy to read structure of slub just to reduce atomic ops. However, there is someone out there with a benchmark on 4 way and 8 way processor systems that seems to show a 5% regression vs. Slab. Seems that the regression is due to increased atomic operations use vs. SLAB in SLUB). I wonder if this is applicable or discernable at all in a real workload?] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10x86_64: fix default_do_nmi() missing return after an if ()Mathieu Desnoyers
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters IB: Put rlimit accounting struct in struct ib_umem IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules
2007-05-09Merge branch 'usb-move' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'usb-move' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: Move USB network drivers to drivers/net/usb.
2007-05-09Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: Doc Fix: remove mention of combined mode-related kernel parameters libata: fix kernel-doc parameters Fix pata_qdi.c probe code pata_scc: fix compilation sata_via: add missing PM hooks sata_nv: fix ADMA freeze/thaw/irq_clear issues pata_pcmcia.c: add card ident for jvc cdrom sata_promise: SATAII-150/300 TX4 port numbering fix sata_promise: fix another error decode regression libata-acpi: fix _GTF command protocol for ATAPI devices
2007-05-09Revert "md: improve partition detection in md array"Linus Torvalds
This reverts commit 5b479c91da90eef605f851508744bfe8269591a0. Quoth Neil Brown: "It causes an oops when auto-detecting raid arrays, and it doesn't seem easy to fix. The array may not be 'open' when do_md_run is called, so bdev->bd_disk might be NULL, so bd_set_size can oops. This whole approach of opening an md device before it has been assembled just seems to get more and more painful. I think I'm going to have to come up with something clever to provide both backward comparability with usage expectation, and sane integration into the rest of the kernel." Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09Move USB network drivers to drivers/net/usb.Jeff Garzik
It is preferable to group drivers by usage (net, scsi, ATA, ...) than by bus. When reviewing drivers, the [PCI|USB|PCMCIA|...] maintainer is probably less qualified on networking issues than a networking maintainer. Also, from a practical standpoint, chips often appear on multiple buses, which is why we do not put drivers into drivers/pci/net. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09Doc Fix: remove mention of combined mode-related kernel parametersJesse Barnes
Looks like you removed the combined_mode quirk (yay!) but didn't update kernel-parameters.txt... might confuse people. Here's a patch to remove mention of it from the documentation. Signed-off-by: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09libata: fix kernel-doc parametersRandy Dunlap
Warning(linux-2.6.21-git4//drivers/ata/libata-core.c:904): No description found for parameter 'new_sectors' Warning(linux-2.6.21-git4//drivers/ata/libata-core.c:941): No description found for parameter 'new_sectors' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09Fix pata_qdi.c probe codeSamuel Thibault
There is a small typo in the probe code of pata_qdi.c, here is a patch. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09pata_scc: fix compilationAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09sata_via: add missing PM hooksTejun Heo
For some reason, sata_via is missing PM hooks. Add them. Spotted by Jeroen Janssen <jeroen.janssen@gmail.com>. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jeroen Janssen <jeroen.janssen@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09sata_nv: fix ADMA freeze/thaw/irq_clear issuesRobert Hancock
This patch fixes some problems with ADMA-capable controllers with regard to freeze, thaw and irq_clear libata callbacks. Freeze and thaw didn't switch the ADMA-specific interrupts on or off, and more critically the irq_clear function didn't respect the restriction that the notifier clear registers for both ports have to be written at the same time even when only one port is being cleared. This could result in timeouts on one port when error handling (i.e. as a result of hotplug) occurred on the other port. As well, this fixes some issues in the interrupt handler: we shouldn't check any ADMA status if the port has ADMA switched off because of an ATAPI device, and it also checks to see if any ADMA interrupt has been raised even when we are in port-register mode. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09pata_pcmcia.c: add card ident for jvc cdromRichard Kennedy
update pata_pcmcia to add card ident for JVC MP-CDX1 cdrom drive card info: PRODID_1="KME" PRODID_2="KXLC005" PRODID_3="00" MANFID=0032,2904 Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09sata_promise: SATAII-150/300 TX4 port numbering fixMikael Pettersson
There is a known problem with sata_promise on SATAII-150/300 TX4 controller cards: it enumerates drives in an order that differs from the port numbers printed on the controller cards. However, Promise's BIOS and Linux driver both get the order right. I investigated Promise's Linux driver (v1.01.0.23), and found that it explicitly changes the mapping from logical port number to ATA engine MMIO address on the SATAII TX4 cards. It does this on all SATAII TX4 cards, without inspecting revision etc. The SATAII TX2plus cards continue to use the same mapping that was used for the first-generation chips. This patch updates sata_promise to use the new port number to ATA engine mapping on SATAII TX4 cards, which fixes the drive enumeration order problem on those cards. Tested on several 1st and 2nd generation TX2plus and TX4 chips. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09sata_promise: fix another error decode regressionMikael Pettersson
The sata_promise error decode update changed pdc_host_intr() to return and not complete the qc after detecting an error. Unfortunately not completing the qc:s causes them to always time out on error, which is wrong and has nasty side-effects. This patch updates pdc_error_intr() to call ata_port_abort(), similar to ahci and sata_sil24. Doing this is important as it makes EH see the original error and not a bogus timeout. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09libata-acpi: fix _GTF command protocol for ATAPI devicesTejun Heo
_GTF command is never ATA_PROT_ATAPI_NODATA whether the device is ATAPI or not. It's always ATA_PROT_NODATA. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09atl1: add netconsole supportAlexey Dobriyan
Copied from b44 driver, but it works: netconsole: device eth0 not up yet, forcing it atl1: eth0 link is up 100 Mbps full duplex netconsole: network logging started Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09Fix hang on IBM Token Ring PCMCIA card ejectionPaul Walmsley
Ejecting a PCMCIA IBM Token Ring card that has not had its dev->open() called will reliably trigger an uninitialized spinlock oops when spinlock debugging is enabled. The system then hangs, occasionally softlockup oopsing. Apparently ibmtr.c:tok_interrupt() doesn't expect to be called before tok_open(), but tok_interrupt() gets called anyway when the card is ejected. So, set an already-existing flag which causes tok_interrupt() to bail out early upon card ejection. Tested by inserting and removing the PCMCIA card several times. Signed-off-by: Paul Walmsley <paul@booyaka.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09skge: default WOL should be magic only (rev2)Stephen Hemminger
By default, the skge driver now enables wake on magic and wake on PHY. This is a bad default (bug), wake on PHY means machine will never shutdown if connected to a switch. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>a Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09Merge branch 'upstream' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
2007-05-09Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: ide: fix PIO setup on resume for ATAPI devices ide: legacy PCI bus order probing fixes ide: add ide_proc_register_port() ide: add "initializing" argument to ide_register_hw() ide: cable detection fixes (take 2) ide: move IDE settings handling to ide-proc.c ide: split off ioctl handling from IDE settings (v2) ide: make /proc/ide/ optional ide: add ide_tune_dma() helper ide: rework the code for selecting the best DMA transfer mode (v3) ide: fix UDMA/MWDMA/SWDMA masks (v3)
2007-05-09Merge git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds
* git://git.linux-nfs.org/pub/linux/nfs-2.6: NFS: Kill the obsolete NFS_PARANOIA NFS: use __set_current_state() sunrpc: fix crash in rpc_malloc() NFS: Clean up NFSv4 XDR error message NFS: NFS client underestimates how large an NFSv4 SETATTR reply can be SUNRPC: Fix pointer arithmetic bug recently introduced in rpc_malloc/free NFS: Remove redundant check in nfs_check_verifier() NFS: Fix a jiffie wraparound issue
2007-05-10ide: fix PIO setup on resume for ATAPI devicesBartlomiej Zolnierkiewicz
PIO should be restored also for ATAPI devices during resume, fix it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: legacy PCI bus order probing fixesBartlomiej Zolnierkiewicz
IDE PCI host drivers should register themselves with IDE core only when IDE driver is built-in, otherwise (IDE driver is modular and thus IDE PCI host drivers are also modular) the code has no effect and just complicates the probing. Fix it by adding new config option CONFIG_IDEPCI_PCIBUS (defined only when needed and invisible to the user) and covering by #ifdef/#endif the code in question. It turned out that "ide=reverse" was silently accepted but did nothing in case when IDE driver was modular, this is fixed now. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: add ide_proc_register_port()Bartlomiej Zolnierkiewicz
* create_proc_ide_interfaces() tries to add /proc entries for every probed and initialized IDE port, replace it by ide_proc_register_port() which does it only for the given port (also rename destroy_proc_ide_interface() to ide_proc_unregister_port() for consistency) * convert {create,destroy}_proc_ide_interface[s]() users to use new functions * pmac driver depended on proc_ide_create() to add /proc port entries, fix it * au1xxx-ide, swarm and cs5520 drivers depended indirectly on ide-generic driver (CONFIG_IDE_GENERIC=y) to add port /proc entries, fix them * there is now no need to add /proc entries for IDE ports in proc_ide_create() so don't do it * proc_ide_create() needs now to be called before drivers are probed - fix it, while at it make proc_ide_create() create /proc "ide" directory Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: add "initializing" argument to ide_register_hw()Bartlomiej Zolnierkiewicz
Add "initializing" argument to ide_register_hw() and use it instead of ide.c wide variable of the same name. Update all users of ide_register_hw() accordingly. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: cable detection fixes (take 2)Bartlomiej Zolnierkiewicz
Tejun's recent eighty_ninty_three() fix has inspired me to do more thorough review of the cable detection code... * print user-friendly warning about limiting the maximum transfer speed to UDMA33 (and the reason behind it) when 80-wire cable is not detected, also while at it cleanup eighty_ninty_three() a bit * use eighty_ninty_three() in ide_ata66_check(), this actually fixes 3 bugs: - bit 14 (word 93 validity check) == 1 && bit 13 (80-wire cable test) == 1 were used as 80-wire cable present test for CONFIG_IDEDMA_IVB=n case (please see FIXME comment in eighty_ninty_three() for more details) - CONFIG_IDEDMA_IVB=y/n cases were interchanged - check for SATA devices was missing * remove private cable warnings from pdc_202xx{old,new} drivers now that core code provides this functionality (plus, in pdc202xx_new case the test could give false warnings for ATAPI devices because pdc202xx_new driver doesn't even support ATAPI DMA) Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: move IDE settings handling to ide-proc.cBartlomiej Zolnierkiewicz
* move __ide_add_setting() ide_add_setting() __ide_remove_setting() auto_remove_settings() ide_find_setting_by_name() ide_read_setting() ide_write_setting() set_xfer_rate() ide_add_generic_settings() ide_register_subdriver() ide_unregister_subdriver() from ide.c to ide-proc.c * set_{io_32bit,pio_mode,using_dma}() cannot be marked static now, fix it * rename ide_[un]register_subdriver() to ide_proc_[un]register_driver(), update device drivers to use new names * add CONFIG_IDE_PROC_FS=n versions of ide_proc_[un]register_driver() and ide_add_generic_settings() * make ide_find_setting_by_name(), ide_{read,write}_setting() and ide_{add,remove}_proc_entries() static * cover IDE settings code in device drivers with CONFIG_IDE_PROC_FS #ifdef, also while at it cover with CONFIG_IDE_PROC_FS #ifdef ide_driver_t.proc * remove bogus comment from ide.h * cover with CONFIG_IDE_PROC_FS #ifdef .proc and .settings in ide_drive_t Besides saner code this patch results in the IDE core smaller by ~2 kB (on x86-32) and IDE disk driver by ~1 kB (ditto) when CONFIG_IDE_PROC_FS=n. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: split off ioctl handling from IDE settings (v2)Bartlomiej Zolnierkiewicz
* do write permission and min/max checks in ide_procset_t functions * ide-disk.c: drive->id is always available so cleanup "multcount" setting accordingly * ide-disk.c: "address" setting was incorrectly defined as type TYPE_INTA, fix it by using type TYPE_BYTE and updating ide_drive_t->adressing field, the bug didn't trigger because this IDE setting uses custom ->set function * ide.c: add set_ksettings() for handling HDIO_SET_KEEPSETTINGS ioctl * ide.c: add set_unmaskirq() for handling HDIO_SET_UNMASKINTR ioctl * handle ioctls directly in generic_ide_ioclt() and idedisk_ioctl() instead of using IDE settings to deal with them * remove no longer needed ide_find_setting_by_ioctl() and {read,write}_ioctl fields from ide_settings_t, also remove now unused TYPE_INTA handling v2: * add missing EXPORT_SYMBOL_GPL(ide_setting_sem) needed now for ide-disk Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: make /proc/ide/ optionalBartlomiej Zolnierkiewicz
All important information/features should be already available through sysfs and ioctl interfaces. Add CONFIG_IDE_PROC_FS (CONFIG_SCSI_PROC_FS rip-off) config option, disabling it makes IDE driver ~5 kB smaller (on x86-32). While at it add CONFIG_PROC_FS=n versions of proc_ide_{create,destroy}() and remove no longer needed #ifdefs. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: add ide_tune_dma() helperBartlomiej Zolnierkiewicz
After reworking the code responsible for selecting the best DMA transfer mode it is now possible to add generic ide_tune_dma() helper. Convert some IDE PCI host drivers to use it (the ones left need more work). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: rework the code for selecting the best DMA transfer mode (v3)Bartlomiej Zolnierkiewicz
Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: fix UDMA/MWDMA/SWDMA masks (v3)Bartlomiej Zolnierkiewicz
* use 0x00 instead of 0x80 to disable ->{ultra,mwdma,swdma}_mask * add udma_mask field to ide_pci_device_t and use it to initialize ->ultra_mask in aec62xx, cmd64x, pdc202xx_{new,old} and piix drivers * fix UDMA masks to match with chipset specific *_ratemask() (alim15x3, hpt366, serverworks and siimage drivers need UDMA mask filtering method - done in the next patch) v2: * piix: fix cable detection for 82801AA_1 and 82372FB_1 [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] * cmd64x: use hwif->cds->udma_mask [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] * aec62xx: fix newly introduced bug - check DMA status not command register [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * piix: use hwif->cds->udma_mask [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-09NFS: Kill the obsolete NFS_PARANOIAJesper Juhl
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-05-09NFS: use __set_current_state()Milind Arun Choudhary
use __set_current_state(TASK_*) instead of current->state = TASK_*, in fs/nfs Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-05-09sunrpc: fix crash in rpc_malloc()Peter Zijlstra
While the comment says: * To prevent rpciod from hanging, this allocator never sleeps, * returning NULL if the request cannot be serviced immediately. The function does not actually check for NULL pointers being returned. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-05-09NFS: Clean up NFSv4 XDR error messageChuck Lever
Make it more useful for debugging purposes. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-05-09NFS: NFS client underestimates how large an NFSv4 SETATTR reply can beChuck Lever
The maximum size of an NFSv4 SETATTR compound reply should include the GETATTR operation that we send. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-05-09SUNRPC: Fix pointer arithmetic bug recently introduced in rpc_malloc/freeChuck Lever
Use a cleaner method to find the size of an rpc_buffer. This actually works on x86-64! Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-05-09NFS: Remove redundant check in nfs_check_verifier()Trond Myklebust
The check for nfs_attribute_timeout(dir) in nfs_check_verifier is redundant: nfs_lookup_revalidate() will already call nfs_revalidate_inode() on the parent dir when necessary. The only case where this is not done is the case of a negative dentry. Fix this case by moving up the revalidation code. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-05-09NFS: Fix a jiffie wraparound issueTrond Myklebust
dentry verifiers are always set to the parent directory's cache_change_attribute. There is no reason to be testing for anything other than equality when we're trying to find out if the dentry has been checked since the last time the directory was modified. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-05-09[IA64] sa_interrupt is deprecatedakpm@linux-foundation.org
Seems more than just deprecated, we can't build using SA_INTERUPT. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] wire up pselect, ppoll [IA64] Add TIF_RESTORE_SIGMASK [IA64] unwind did not work for processes born with CLONE_STOPPED [IA64] Optional method to purge the TLB on SN systems [IA64] SPIN_LOCK_UNLOCKED macro cleanup in arch/ia64 [IA64-SN2][KJ] mmtimer.c-kzalloc [IA64] fix stack alignment for ia32 signal handlers [IA64] - Altix: hotplug after intr redirect can crash system [IA64] save and restore cpus_allowed in cpu_idle_wait [IA64] Removal of percpu TR cleanup in kexec code [IA64] Fix some section mismatch errors
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 00:21:55 +0000