aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-05-25Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath/ath5k/phy.c drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl3945-base.c
2009-05-25mISDN: Added PCI ID for new Junghanns.net Single E1 cards.Andreas Eversberg
The new ID is validated by Cologne Chip. LEDs control is also supported. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Fix DTMF detection enable/disableAndreas Eversberg
DTMF detection was enabled when it was not supposed to. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Use kernel_{send,recv}msg instead of open codingArnaldo Carvalho de Melo
Reducing the number of direct users of sock_{recv,send}msg. Modified version to match the latest context. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Cleanup debug messagesKarsten Keil
This patch make debug printk's KERN_DEBUG and also fix some codestyle issues. Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Add PCI ID for Junghanns 8S cardAndreas Eversberg
new id for HFC-8S Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: get_free_devid() failure ignoredRoel Kluin
dev->id is unsigned so a get_free_devid() error is ignored. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Add XHFC support for embedded Speech-Design board to hfcmultiKarsten Keil
New version without emulating arch specific stuff for the other architectures, the special IO and init functions for the 8xx microcontroller are in a separate include file. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Fix skb leak in error casesKarsten Keil
If the channel receive function returns an error the skb must be freed. Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Add "sapi" information to debug messagesAndreas Eversberg
Using sapi values other than 0 work now. The "OpenBSC" project does not require special kernel patch anymore. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Add allocation of recvbuf[1500] at run time to reduce stack sizeFrank Seidel
Before: 1656 bytes on i386, now 164. Modified by Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Frank Seidel <frank@f-seidel.de> Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Fix TEI and SAPI handlingAndreas Eversberg
Added SAPI value to use SAPIs different than 0. Now fixed TEIs work in NT mode. This allows PTP endpoint to be connected to PTMP ports together with other PTMP endpoints. New enhanced version, thanks to Sam Ravnborg <sam@ravnborg.org> for the hints. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Hardware acceleration is now possible in conjunction with audio recordingAndreas Eversberg
Audio recording requires software audio processing. Both hardware and software processing is simultaniously possible now. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Fix DTMF locking bug issueAndreas Eversberg
DTMF digits were sent up to socket in locked state. Receive audio stream was not enabled in certain condition. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Added layer-1-hold featureAndreas Eversberg
Add IMHOLD_L1 ioctl. The feature will be disabled on closing. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Fixed missing spin lock on pipeline processAndreas Eversberg
Need to protect the complete pipeline. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Reduce stack size in dsp_cmx_send()Frank Seidel
Reduce stack size memory footprint of mISDN_dsp. (From 1468 bytes for dsp_cmx_send on i386 down to 44). Signed-off-by: Frank Seidel <frank@f-seidel.de> Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Echo canceler now gets delay information from hardwareAndreas Eversberg
Added tx-fifo information for calculation of current delay to sync tx and rx streams for echo canceler. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: DSP now uses ring buffer for echo cancelerAndreas Eversberg
DSP now uses ring buffer for echo canceler. Added missing include in l1oip_codec.c Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Add watchdog functionality to hfcmulti driverAndreas Eversberg
This patch was made by Titus Moldovan and provides IOCTL functions for enabling and disabling the controller's built in watchdog. The use is optional. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25gianfar: fix BUG under load after introduction of skb recyclingLennert Buytenhek
Since commit 0fd56bb5be6455d0d42241e65aed057244665e5e ("gianfar: Add support for skb recycling"), gianfar puts skbuffs that are in the rx ring back onto the recycle list as-is in case there was a receive error, but this breaks the following invariant: that all skbuffs on the recycle list have skb->data = skb->head + NET_SKB_PAD. The RXBUF_ALIGNMENT realignment done in gfar_new_skb() will be done twice on skbuffs recycled in this way, causing there not to be enough room in the skb anymore to receive a full packet, eventually leading to an skb_over_panic from gfar_clean_rx_ring() -> skb_put(). Resetting the skb->data pointer to skb->head + NET_SKB_PAD before putting the skb back onto the recycle list restores the mentioned invariant, and should fix this issue. Reported-by: Michael Guntsche <mike@it-loops.com> Tested-by: Michael Guntsche <mike@it-loops.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25skbuff: Copy csum instead of csum_start/csum_offsetHerbert Xu
Hi: skbuff: Copy csum instead of csum_start/csum_offset It's easier to copy the u32 csum instead of its two u16 constituents. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cheers, Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25skbuff: Move new code into __copy_skb_headerHerbert Xu
Hi: skbuff: Move new __skb_clone code into __copy_skb_header It seems that people just keep on adding stuff to __skb_clone instead __copy_skb_header. This is wrong as it means your brand-new attributes won't always get copied as you intended. This patch moves them to the right place, and adds a comment to prevent this from happening again. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Thanks, Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-05-25myri10ge: Add support for vlan_featuresBrice Goglin
Add support for netdev->vlan_features in the myri10ge driver. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25myri10ge: drop myri10ge_lro module parameterBrice Goglin
Drop the myri10ge_lro module parameter now that we have ethtool to enable/disable LRO in the myri10ge driver. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25myri10ge: fix the invokation of lro_flush_allBrice Goglin
Fix the way we check whether lro_flush_all should be called in the myri10ge driver. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mlx4_en: Fix partial rings featureYevgeny Petrilin
In case of allocation failure, the actual ring size is rounded down to nearest power of 2. The remaining descriptors are freed. The CQ and SRQ are allocated with the actual size and the mask is updated. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mlx4_en: Removed redundant stride variableYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-22iwlwifi: check for valid band for channel infoWey-Yi Guy
when display channel info in debugfs, always check for valid band before access the pointer and display information for 1000 NIC, it only support "bgn" mode, so there is no 5.2GHz channels available to display. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlagn: co-exist with AMTMohamed Abbas
Enable using iwlwifi driver in AMT system. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlcore: Set rb_timeout to 0x10 for devices with ICTMohamed Abbas
rb value should be 0x10 for devices using ICT. RX interrupt was not performing well with 0 value Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlcore: Add support for periodic RX interruptMohamed Abbas
Periodic RX interrupt needed with ICT interrupt to prevent RX race. Sending RX interrupt require many steps to be done in the the device: 1- write interrupt to current index in ICT table. 2- dma RX frame. 3- update RX shared data to indicate last write index. 4- send interrupt. This could lead to RX race, driver could receive RX interrupt but the shared data changes does not reflect that. this could lead to RX race, RX periodic will solve this race Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlcore: Allow skb allocation from tasklet.Mohamed Abbas
If RX queue becomes empty then we need to restock the queue from tasklet to prevent ucode from starving. A caller to iwl_rx_allocate will decide if allocated buffer should come from GFP_ATOMIC or GFP_KERNEL. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlcore: support ICT interruptMohamed Abbas
Add ICT interrupt handler support, ICT should improve CPU utilization since it does not require target read which is very expensive. This interrupt handler only added to 5000 cards and newer. Device will write interrupts to ICT shared table to inform driver about its interrupts. These patches will not touch 3945 and 4965 interrupt handlers and tasklet. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlwifi: support "pure 40MHz" in RXON commandWey-Yi Guy
Fix the bug when using 11n "pure 40MHz" mode cause uCode crashing by adding support for "pure 40MHz" in RX_ON command flag. the "mode" field (bits 25:26) has value of 0-3 0 = 20 MHz only 1 = 40MHz only 2 = Mixed 3 = Reserved Control Channel ID (bit 22) is valid only in Mixed mode. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlwifi: report the rate index as an MCS rate numberWey-Yi Guy
If transmit in HT rate, report the rate index as an MCS rate number instead of an index. so "iw" can display correct BitRate Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlcore: register locksMohamed Abbas
Add new lock to be used when accessing some registers. Also move the register lock and iwl_grab_nic_access inside the function for register access. This will prevent from forgetting to hold locks and nic access in the right way and make code easier to maintain. We over use the priv->lock spin lock and I guess we need to add new one for Tx queue after that we might need to change most of these lock to BH and just keep priv->lock as irq type. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlwifi: support NVM access (EEPROM/OTP)Wey-Yi Guy
Two type of NVM available for devices 1000, 6000 and after, adding support to read OTP lower blocks if OTP is used instead of EEPROM. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22rt2x00: Remove usage of IEEE80211_CONF_CHANGE_BEACON_INTERVALIvo van Doorn
IEEE80211_CONF_CHANGE_BEACON_INTERVAL was deprecated a month ago, it is about time to remove all usage from the rt2x00 drivers and use the correct beacon interval configuration through the bss_info structure. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22rt2x00: Add new rt2800usb USB ID's for SweexIvo van Doorn
The USB ID with unknown manufacturer is apparently sweex, copy it to the correct location of the list and add 2 additional USB ID's also belonging to Sweex. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22rndis_wlan: do not try to restore wpa keys using add_wep_key()Jussi Kivilinna
set_infra_mode() tried to restore wpa keys using add_wep_key(). This never worked so prevent driver from trying. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22rndis_wlan: split add_wpa_key from rndis_iw_set_encode_extJussi Kivilinna
Split add_wpa_key() from rndis_iw_set_encode_ext so that conversion to cfg80211 would be easier later on. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22rndis_wlan: explain bits used in key setup code.Jussi Kivilinna
Driver uses some unnamed bits to control encryption setup. Move these to enumerations with proper names explaining their meaning. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22rndis_wlan: remove CAP_SUPPORT_TXPOWER/OID_802_11_TX_POWER_LEVEL codeJussi Kivilinna
BCM4320 doesn't support OID_802_11_TX_POWER_LEVEL (chip implements the command but setting value has no effect and getting txpower value always returns 0xff, full power). So remove the code for cleanup. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22rndis_wlan: fix support for bcm4320aJussi Kivilinna
Old variant of bcm4320 doesn't handle setting configuration parameters correctly. One symptom is that MAC gets partially overwritten when any config parameters are set. This patch disables config-params for bcm4320a (and generic rndis-wlan). Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlwifi: Temperature sensor voltage reading for 5150Wey-Yi Guy
The temperature measurement by uCode for 5150 and 5000 are different CSR_HW_REV_TYPE_5150: temperature sensor output voltage CSR_HW_REV_TYPE_5000: temperature in Celsius temperature related operation for 5150 is measured by temperature sensor output voltage; additional conversion is required for set and store the temperature. To make sure support different HW design; implement _ops method for temperature related functions (temperature reading and set ct kill threshold) Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlwifi: add Greenfield support for 11nWey-Yi Guy
Add "Greenfield" support for all devices except 4965 and 3945. "Greenfield" is part of 11n features to improve HT performance. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwl3945: improve 3945 ledsAbhijeet Kolekar
'tpt' is a delta throughput (number of packets) and is corelated to brightness of the LED. We already maintain a delta of packets in rxtxpackets. There is no need to calculate this delta again which was affecting the behaviour of LEDS. Also add two new callback functions for ASSOCIATED/DISASSOCIATED states where LED's will be *on* for associated state and *off* for disassociated state. This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1771. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22libertas: read SD8688 firmware status from new registerBing Zhao
The scratch pad register is used to store firmware status after firmware is downloaded and initialized. After firmware status is verified OK, the same register is used to store RX packet length. Hence the firmware status code is no longer valid afterwards. SD8688 firmware introduces a new register for firmware status which will never be overwritten. Also add scratch_reg variable to if_sdio_card structure and initialize it based on the model of the card during probe. Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-10 07:07:30 +0000