aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-12-05igb/e1000e: Naming interrupt vectorsAlexander Duyck
Change interrupt vector naming to match recent changes from Robert Olsson. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04xfrm: Accept ESP packets regardless of UDP encapsulation modeMartin Willi
From: Martin Willi <martin@strongswan.org> An IPsec node speaking IKEv2 MUST accept incoming UDP encapsulated ESP packets, even if no NAT situation is detected. This is important if MOBIKE is in use. Some implementation keep the encapsulation mode if they move out of a NAT situation. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sgi-xp: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). [ Kill unnecessary casts, noticed by Ilpo -DaveM ] Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04um: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04xtensa: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04simeth: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03net/ipv6/ip6mr.c: Use kmem_cache_zalloc, remove memsetJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03if_usb: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03smc91x: remove isa stuff from smc91x driverLuotao Fu
ISA support in smc91x is incomplete. I doubt there're any smc91x isa card. This driver is greatly used on arm pxa platforms. Hence we remove the isa stuff from smc91x driver. Signed-off-by: Luotao Fu <lfu@pengutronix.de> Acked-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03net: /proc/net/ip_mr_cache, display Iif as a signed shortBenjamin Thery
Today, iproute2 fails to show multicast forwarding unresolved cache entries while scanning /proc/net/ip_mr_cache. Indeed, it expects to see -1 in 'Iif' column to identify unresolved entries but the kernel outputs 65535. It's a signed/unsigned issue: 'Iif', the source interface, is retrieved from member mfc_parent in struct mfc_cache. mfc_parent is a vifi_t: unsigned short, but is displayed in ipmr_mfc_seq_show() as "%-3d", signed integer. In unresolevd entries, the 65535 value (0xFFFF) comes from this define: #define ALL_VIFS ((vifi_t)(-1)) That may explains why the guy who added support for this in iproute2 thought a -1 should be expected. I don't know if this must be fixed in kernel or in iproute2. Who is right? What is the correct API? How was it designed originally? I let you decide if it should goes in the kernel or be fixed in iproute2. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03net: fix /proc/net/ip_mr_cache display - V2Benjamin Thery
/proc/net/ip_mr_cache and /proc/net/ip6_mr_cache displays garbage when showing unresolved mfc_cache entries. [root@qemu tests]# cat /proc/net/ip_mr_cache Group Origin Iif Pkts Bytes Wrong Oifs 014C00EF 010014AC 1 10 10050 0 2:1 3:1 024C00EF 010014AC 65535 514 2 -559067475 The first line is correct. It is a resolved cache entry, 10 packets used it... The second line represents an unresolved entry, and the columns Pkts(4th), Bytes(5th) and Wrong(6th) just show garbage. In struct mfc_cache, there's an union to store data for resolved and unresolved cases. And what ipmr_mfc_seq_show() is printing in these columns for the unresolved entries is some bytes from mfc_cache.mfc_un.res. Bad. (eg. In our case -559067475 is in fact 0xdead4ead which is the spinlock magic from mfc_cache.mfc_un.unres.unresolved.lock.magic). This patch replaces the garbage data written in these columns for the unresolved entries by '0' (zeros) which is more correct. This change doesn't break the ABI. Also, mfc->mfc_un.res.pkt, mfc->mfc_un.res.bytes, mfc->mfc_un.res.wrong_if are unsigned long. It applies on top of net-next-2.6. The patch for net-2.6 is slightly different because of the NIP6_FMT to %pI6 conversion that was made in the seq_printf. Changelog: ========== V2: * Instead of breaking the ABI by suppressing the columns that have no meaning for unresolved entries, fill them with 0 values. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03netdev: remove pathetic compile-command linesAlexey Dobriyan
-m486, -O6 are partircularly amusing. Remove some other useless lines near as well. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03atm: 32-bit ioctl compatibilityDavid Woodhouse
We lack compat ioctl support through most of the ATM code. This patch deals with most of it, and I can now at least use BR2684 and PPPoATM with 32-bit userspace. I haven't added a .compat_ioctl method to struct atm_ioctl, because AFAICT none of the current users need any conversion -- so we can just call the ->ioctl() method in every case. I looked at br2684, clip, lec, mpc, pppoatm and atmtcp. In svc_compat_ioctl() the only mangling which is needed is to change COMPAT_ATM_ADDPARTY to ATM_ADDPARTY. Although it's defined as _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf) it doesn't actually _take_ a struct atm_iobuf as an argument -- it takes a struct sockaddr_atmsvc, which _is_ the same between 32-bit and 64-bit code, so doesn't need conversion. Almost all of vcc_ioctl() would have been identical, so I converted that into a core do_vcc_ioctl() function with an 'int compat' argument. I've done the same with atm_dev_ioctl(), where there _are_ a few differences, but still it's relatively contained and there would otherwise have been a lot of duplication. I haven't done any of the actual device-specific ioctls, although I've added a compat_ioctl method to struct atmdev_ops. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03ne-h8300: convert to net_device_opsStephen Hemminger
Another device using 8390 library that needs converting. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03hydra: convert to net_device_opsStephen Hemminger
Another device using 8390 library that needs converting. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03zorro8390: convert to net_device_opsStephen Hemminger
Another device using 8390 library that needs converting. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03e1000: e1000_adapter->polling_netdev is uselessWang Chen
Commit bea3348eef27e6044b6161fd04c3152215f96411 "[NET]: Make NAPI polling independent of struct net_device objects." made NAPI polling to be independent of net_device. So e1000_adapter->polling_netdev is no longer used. Kill it. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03ixgbe: function comment typoWang Chen
Seems the ixgbe's code was copied from e1000. The comment talks about something not exist. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03jme: Remove 64 and 40 bit dma_maskGuo-Fu Tseng
Although the hardware supports the 64bit DMA address in design, but later found that it actually not working. This patch reduced the rang to 32bit. Found-by: "Ethan" <ethanhsiao@jmicron.com> Signed-off-by: "Guo-Fu Tseng" <cooldavid@cooldavid.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03jme: GHC register control fix for new hardwareakeemting
Due to the hardware design, except the first chip on the market, other chips needs to setup the clock source for MAC processor implicitly through Global Host Control Register(GHC). (Strange design huh?) 10/100M uses the PCI-E as clock source, and 1G uses GPHY. And I reordered the code a little, to make it easier to read. Found-by: "Ethan" <ethanhsiao@jmicron.com> Fixed-by: "akeemting" <akeem@jmicron.com> Signed-off-by: "Guo-Fu Tseng" <cooldavid@cooldavid.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03pkt_sched: sch_htb: Replace HTB_ACCNT() macro with inlinesJarek Poplawski
Replace HTB_ACCNT() macro with inlines to make it more readable. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03pkt_sched: sch_htb: Remove L2T()Jarek Poplawski
L2T() is currently used only in one place (and has one spurious parameter, btw), so let's: 'get rid of L2T completely, and just use "qdisc_l2t(rate, size)" directly.' - quote & feedback from David S. Miller. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03bond: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03mptlan: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03dvb: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03pkt_sched: sch_htb: Clean htb_class prio and quantum fieldsJarek Poplawski
While implementing htb_parent_to_leaf() there where added backup prio and quantum struct htb_class fields to preserve these values for inner classes in case of their return to leaf. This patch cleans this a bit by removing union leaf duplicates. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03pkt_sched: sch_htb: Remove htb_sched nwc_hit fieldJarek Poplawski
Remove practically unused struct htb_sched nwc_hit field. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03pkt_sched: sch_htb: Remove htb_class aprio fieldJarek Poplawski
Remove practically unused struct htb_class aprio field. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03forcedeth: power down phy when interface is downEd Swierk
Bring the physical link down when the interface is down by placing the PHY in power-down state, unless WOL is enabled. This mirrors the behavior of other drivers including e1000 and tg3. Without the patch, ifconfig down leaves the physical link up, which confuses datacenter users who expect the link lights both on the NIC and the switch to go out when they bring an interface down. Furthermore, even though the phy is powered on, autonegotiation stops working, so a normally gigabit link might suddenly become 100 Mbit half-duplex when the interface goes down, and become gigabit when it comes up again. Ayaz said: I would not include this patch until further testing is performed. NVIDIA MCP chips use 3rd party PHY vendors. By powering down the phy, it could have adverse affects on certain phys. Arthur Jones said: I just ran across this patch. Tested on a Marvell 88E1121R (GigE PHY) and works great. This is a very important feature for me. Signed-off-by: Ed Swierk <eswierk@arastra.com> Tested-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03drivers/net/smc911x.c: smc911x_drv_probe() cleanupAndrew Morton
Save an ugly ifdef. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03drivers/isdn/mISDN: use ARRAY_SIZEJulia Lawall
ARRAY_SIZE is more concise to use when the size of an array is divided by the size of its type or the size of its first element. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @i@ @@ #include <linux/kernel.h> @depends on i using "paren.iso"@ type T; T[] E; @@ - (sizeof(E)/sizeof(T)) + ARRAY_SIZE(E) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03isdn: Kill directly reference of netdev->privWang Chen
Simply use netdev_priv() to replace netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03hysdn: Kill directly reference of netdev->privWang Chen
Usually, netdev->priv should point to the memory of private data which is allocated in alloc_netdev(). netdev_priv() is used to get the address of the private data. Change the netdev->priv pointer to another memory is wrong. Use netdev->ml_priv for this case. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03Phonet: basic net namespace supportRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03xfrm: Accept XFRM_STATE_AF_UNSPEC SAs on IPv4/IPv6 only hostsMartin Willi
Installing SAs using the XFRM_STATE_AF_UNSPEC fails on hosts with support for one address family only. This patch accepts such SAs, even if the processing of not supported packets will fail. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03xfrm: Cleanup for unlink SPD entryWei Yongjun
Used __xfrm_policy_unlink() to instead of the dup codes when unlink SPD entry. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2008-12-03xfrm: Fix kernel panic when flush and dump SPD entriesWei Yongjun
After flush the SPD entries, dump the SPD entries will cause kernel painc. Used the following commands to reproduct: - echo 'spdflush;' | setkey -c - echo 'spdadd 3ffe:501:ffff:ff01::/64 3ffe:501:ffff:ff04::/64 any -P out ipsec \ ah/tunnel/3ffe:501:ffff:ff00:200:ff:fe00:b0b0-3ffe:501:ffff:ff02:200:ff:fe00:a1a1/require;\ spddump;' | setkey -c - echo 'spdflush; spddump;' | setkey -c - echo 'spdadd 3ffe:501:ffff:ff01::/64 3ffe:501:ffff:ff04::/64 any -P out ipsec \ ah/tunnel/3ffe:501:ffff:ff00:200:ff:fe00:b0b0-3ffe:501:ffff:ff02:200:ff:fe00:a1a1/require;\ spddump;' | setkey -c This is because when flush the SPD entries, the SPD entry is not remove from the list. This patch fix the problem by remove the SPD entry from the list. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-02Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6
2008-12-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ixgbe/ixgbe_main.c drivers/net/smc91x.c
2008-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] hpwdt: Fix kdump when using hpwdt [WATCHDOG] hpwdt: set the mapped BIOS address space as executable [WATCHDOG] iTCO_wdt: add PCI ID's for ICH9 & ICH10 chipsets [WATCHDOG] iTCO_wdt : correct status clearing [WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboards [WATCHDOG] fix mtx1_wdt compilation failure
2008-12-02Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: pre-allocate bulk-read buffer UBIFS: do not allocate too much UBIFS: do not print scary memory allocation warnings UBIFS: allow for gaps when dirtying the LPT UBIFS: fix compilation warnings MAINTAINERS: change UBI/UBIFS git tree URLs UBIFS: endian handling fixes and annotations UBIFS: remove printk
2008-12-02Merge branch 'kvm-updates/2.6.28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: MMU: avoid creation of unreachable pages in the shadow KVM: ppc: stop leaking host memory on VM exit KVM: MMU: fix sync of ptes addressed at owner pagetable KVM: ia64: Fix: Use correct calling convention for PAL_VPS_RESUME_HANDLER KVM: ia64: Fix incorrect kbuild CFLAGS override KVM: VMX: Fix interrupt loss during race with NMI KVM: s390: Fix problem state handling in guest sigp handler
2008-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix offset calculation in compute_size() rtc: rtc-starfire fixes
2008-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) MAINTAINERS: add netdev to ATM ATM: horizon, fix hrz_probe fail path pppol2tp: Add missing sock_put() in pppol2tp_release() net: Fix soft lockups/OOM issues w/ unix garbage collector macvlan: don't broadcast PAUSE frames to macvlan devices Phonet: fix oops in phonet_address_del() on non-Phonet device netfilter: ctnetlink: fix GFP_KERNEL allocation under spinlock sungem: Fix PCS_MIICTRL register write in gem_init_phy(). net: make skb_truesize_bug() call WARN() net: hp-plus uses eip_poll net/wireless/reg.c: fix bad WARN_ON in if statement ath5k: disable beacon filter when station is not associated ath5k: fix Security issue in DebugFS part of ath5k ath9k: correct expected max RX buffer size ath9k: Fix SW-IOMMU bounce buffer starvation mac80211 : Fix setting ad-hoc mode and non-ibss channel iwlagn: fix DMA sync phylib: Add Vitesse VSC8221 SGMII PHY rose: zero length frame filtering in af_rose.c bridge: netfilter: fix update_pmtu crash with GRE ...
2008-12-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Update defconfigs for 2.6.28-rc7 macfb: Do not overflow fb_fix_screeninfo.id
2008-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: alim15x3: fix sparse warning ide: remove dead code from drive_is_ready() ide: fix build for DEBUG_PM ide: respect current DMA setting during resume ide: add SAMSUNG SP0822N with firmware WA100-10 to ivb_list[] amd74xx: workaround unreliable AltStatus register for nVidia controllers ide: fix the ide_release_lock imbalance
2008-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] stex: switch to block timeout [SCSI] make scsi_eh_try_stu use block timeout [SCSI] megaraid_sas: switch to block timeout [SCSI] ibmvscsi: switch to block timeout [SCSI] aacraid: switch to block timeout [SCSI] zfcp: prevent double decrement on host_busy while being busy [SCSI] zfcp: fix deadlock between wq triggered port scan and ERP [SCSI] zfcp: eliminate race between validation and locking [SCSI] zfcp: verify for correct rport state before scanning for SCSI devs [SCSI] zfcp: returning an ERR_PTR where a NULL value is expected [SCSI] zfcp: Fix opening of wka ports [SCSI] zfcp: fix remote port status check [SCSI] fc_transport: fix old bug on bitflag definitions [SCSI] Fix hang in starved list processing
2008-12-02MN10300: Fix application of kernel module relocationsMark Salter
This fixes the MN10300 kernel module linking to match the toolchain. RELA relocs don't use the value at the location being relocated. This has been working because the tools always leave the value at the target location cleared. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-02sgi-gru: call fs_initcall() if statically linkedDean Nelson
If xpc.ko and gru.ko are both statically linked into the kernel, then xpc_init() can get called before gru_init() and make a call to one of the gru's exported functions before the gru has initialized itself. The end result is a NULL dereference. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 17:14:46 +0000