aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-02-06BKL-removal: remove incorrect BKL comment in ext2Andi Kleen
No BKL used anywhere, so don't mention it. Signed-off-by: Andi Kleen <ak@suse.de> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06BKL-removal: convert ext2 over to use unlocked_ioctlAndi Kleen
I checked ext2_ioctl and could not find anything in there that would need the BKL. So convert it over to use unlocked_ioctl Signed-off-by: Andi Kleen <ak@suse.de> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext3: add block bitmap validationAneesh Kumar K.V
When a new block bitmap is read from disk in read_block_bitmap() there are a few bits that should ALWAYS be set. In particular, the blocks given corresponding to block bitmap, inode bitmap and inode tables. Validate the block bitmap against these blocks. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext2: add block bitmap validationAneesh Kumar K.V
When a new block bitmap is read from disk in read_block_bitmap() there are a few bits that should ALWAYS be set. In particular, the blocks given corresponding to block bitmap, inode bitmap and inode tables. Validate the block bitmap against these blocks. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06PNP: disable Supermicro H8DCE motherboard resources that overlap SATA BARsBjorn Helgaas
Some Supermicro BIOSes describe a SATA PCI BAR as a motherboard resource. The PNP system driver claims motherboard resources, and this prevents the sata_nv driver from requesting it later. This patch disables the PNP0C01/PNP0C02 resources so they won't be claimed by the PNP system driver, so they'll available for sata_nv. This fixes the bugs below, where sata_nv detects only two out of four SATA drives. The signature includes dmesg lines similar to these: pnp: 00:09: iomem range 0xdfefc000-0xdfefcfff has been reserved pnp: 00:09: iomem range 0xdfefd000-0xdfefd3ff has been reserved pnp: 00:09: iomem range 0xdfefe000-0xdfefe3ff has been reserved PCI: Unable to reserve mem region #6:1000@dfefd000 for device 0000:80:07.0 sata_nv: probe of 0000:80:07.0 failed with error -16 PCI: Unable to reserve mem region #6:1000@dfefe000 for device 0000:80:08.0 sata_nv: probe of 0000:80:08.0 failed with error -16 References: https://bugzilla.redhat.com/show_bug.cgi?id=280641 https://bugzilla.redhat.com/show_bug.cgi?id=313491 http://lkml.org/lkml/2008/1/9/449 http://thread.gmane.org/gmane.linux.acpi.devel/27312 This is post-2.6.24 material. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06PNP: do not test PNP_DRIVER_RES_DO_NOT_CHANGE on suspend/resumeRene Herman
The PNP_DRIVER_RES_DO_NOT_CHANGE flag is meant to signify that the PNP core should not change resources for the device -- not that it shouldn't disable/enable the device on suspend/resume. ALSA ISAPnP drivers set PNP_DRIVER_RES_DO_NOT_CHANAGE (0x0001) through setting PNP_DRIVER_RES_DISABLE (0x0003). The latter including the former may in itself be considered rather unexpected but doesn't change that suspend/resume wouldn't seem to have any business testing the flag. As reported by Ondrej Zary for snd-cs4236, ALSA driven ISAPnP cards don't survive swsusp hibernation with the resume skipping setting the resources due to testing the flag -- the same test in the suspend path isn't enough to keep hibernation from disabling the card it seems. These tests were added (in 2005) by Piere Ossman in commit 68094e3251a664ee1389fcf179497237cbf78331, "alsa: Improved PnP suspend support" who doesn't remember why. This deletes them. Signed-off-by: Rene Herman <rene.herman@gmail.com> Tested-by: Ondrej Zary <linux@rainbow-software.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06isapnp driver semaphore to mutexDaniel Walker
Changed the isapnp semaphore to a mutex. [akpm@linux-foundation.org: no externs-in-c] [akpm@linux-foundation.org: build fix] Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06pnp: declare PNP option parsing functions as __initThomas Renninger
There are three kind of parse functions provided by PNP acpi/bios: - get current resources - set resources - get possible resources The first two may be needed later at runtime. The possible resource settings should never change dynamically. And even if this would make any sense (I doubt it), the current implementation only parses possible resource settings at early init time: -> declare all the option parsing __init [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-By: Rene Herman <rene.herman@gmail.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06simplify pnp_activate_dev() and pnp_disable_dev() return valuesBjorn Helgaas
Make pnp_activate_dev() and pnp_disable_dev() return only 0 (success) or a negative error value, as pci_enable_device() and pci_disable_device() do. Previously they returned: 0: device was already active (or disabled) 1: we just activated (or disabled) device <0: -EBUSY or error from pnp_start_dev() (or pnp_stop_dev()) Now we return only 0 (device is active or disabled) or <0 (error). All in-tree callers either ignore the return values or check only for errors (negative values). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: fix an occasional deadlock in raid5NeilBrown
raid5's 'make_request' function calls generic_make_request on underlying devices and if we run out of stripe heads, it could end up waiting for one of those requests to complete. This is bad as recursive calls to generic_make_request go on a queue and are not even attempted until make_request completes. So: don't make any generic_make_request calls in raid5 make_request until all waiting has been done. We do this by simply setting STRIPE_HANDLE instead of calling handle_stripe(). If we need more stripe_heads, raid5d will get called to process the pending stripe_heads which will call generic_make_request from a This change by itself causes a performance hit. So add a change so that raid5_activate_delayed is only called at unplug time, never in raid5. This seems to bring back the performance numbers. Calling it in raid5d was sometimes too soon... Neil said: How about we queue it for 2.6.25-rc1 and then about when -rc2 comes out, we queue it for 2.6.24.y? Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de> Tested-by: dean gaudet <dean@arctic.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: change ITERATE_RDEV_GENERIC to rdev_for_each_list, and remove ↵NeilBrown
ITERATE_RDEV_PENDING. Finish ITERATE_ to for_each conversion. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: change ITERATE_RDEV to rdev_for_eachNeilBrown
As this is more in line with common practice in the kernel. Also swap the args around to be more like list_for_each. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: change INTERATE_MDDEV to for_each_mddevNeilBrown
As this is more consistent with kernel style. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: change a few 'int' to 'size_t' in mdNeilBrown
As suggested by Andrew Morton. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: fix use-after-free bug when dropping an rdev from an md arrayNeilBrown
Due to possible deadlock issues we need to use a schedule work to kobject_del an 'rdev' object from a different thread. A recent change means that kobject_add no longer gets a refernce, and kobject_del doesn't put a reference. Consequently, we need to explicitly hold a reference to ensure that the last reference isn't dropped before the scheduled work get a chance to call kobject_del. Also, rename delayed_delete to md_delayed_delete to that it is more obvious in a stack trace which code is to blame. Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: allow an md array to appear with 0 drives if it has external metadataNeilBrown
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: lock address when changing attributes of component devicesNeilBrown
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: allow devices to be shared between md arraysNeilBrown
Currently, a given device is "claimed" by a particular array so that it cannot be used by other arrays. This is not ideal for DDF and other metadata schemes which have their own partitioning concept. So for externally managed metadata, just claim the device for md in general, require that "offset" and "size" are set properly for each device, and make sure that if a device is included in different arrays then the active sections do not overlap. This involves adding another flag to the rdev which makes it awkward to set "->flags = 0" to clear certain flags. So now clear flags explicitly by name when we want to clear things. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: set and test the ->persistent flag for md devices more consistentlyNeilBrown
If you try to start an array for which the number of raid disks is listed as zero, md will currently try to read metadata off any devices that have been given. This was done because the value of raid_disks is used to signal whether array details have been provided by userspace (raid_disks > 0) or must be read from the devices (raid_disks == 0). However for an array without persistent metadata (or with externally managed metadata) this is the wrong thing to do. So we add a test in do_md_run to give an error if raid_disks is zero for non-persistent arrays. This requires that mddev->persistent is set corrently at this point, which it currently isn't for in-kernel autodetected arrays. So set ->persistent for autodetect arrays, and remove the settign in super_*_validate which is now redundant. Also clear ->persistent when stopping an array so it is consistently zero when starting an array. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: allow a maximum extent to be set for resyncingNeilBrown
This allows userspace to control resync/reshape progress and synchronise it with other activities, such as shared access in a SAN, or backing up critical sections during a tricky reshape. Writing a number of sectors (which must be a multiple of the chunk size if such is meaningful) causes a resync to pause when it gets to that point. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: give userspace control over removing failed devices when external ↵NeilBrown
metdata in use When a device fails, we must not allow an further writes to the array until the device failure has been recorded in array metadata. When metadata is managed externally, this requires some synchronisation... Allow/require userspace to explicitly remove failed devices from active service in the array by writing 'none' to the 'slot' attribute. If this reduces the number of failed devices to 0, the write block will automatically be lowered. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: support 'external' metadata for md arraysNeilBrown
- Add a state flag 'external' to indicate that the metadata is managed externally (by user-space) so important changes need to be left of user-space to handle. Alternates are non-persistant ('none') where there is no stable metadata - after the array is stopped there is no record of it's status - and internal which can be version 0.90 or version 1.x These are selected by writing to the 'metadata' attribute. - move the updating of superblocks (sync_sbs) to after we have checked if there are any superblocks or not. - New array state 'write_pending'. This means that the metadata records the array as 'clean', but a write has been requested, so the metadata has to be updated to record a 'dirty' array before the write can continue. This change is reported to md by writing 'active' to the array_state attribute. - tidy up marking of sb_dirty: - don't set sb_dirty when resync finishes as md_check_recovery calls md_update_sb when the sync thread finishes anyway. - Don't set sb_dirty in multipath_run as the array might not be dirty. - don't mark superblock dirty when switching to 'clean' if there is no internal superblock (if external, userspace can choose to update the superblock whenever it chooses to). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: Update md bitmap during resync.NeilBrown
Currently an md array with a write-intent bitmap does not updated that bitmap to reflect successful partial resync. Rather the entire bitmap is updated when the resync completes. This is because there is no guarentee that resync requests will complete in order, and tracking each request individually is unnecessarily burdensome. However there is value in regularly updating the bitmap, so add code to periodically pause while all pending sync requests complete, then update the bitmap. Doing this only every few seconds (the same as the bitmap update time) does not notciably affect resync performance. [snitzer@gmail.com: export bitmap_cond_end_sync] Signed-off-by: Neil Brown <neilb@suse.de> Cc: "Mike Snitzer" <snitzer@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: raid6: clean up the style of raid6test/test.cH. Peter Anvin
Clean up the coding style in raid6test/test.c. Break it apart into subfunctions to make the code more readable. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: raid6: Fix mktable.cH. Peter Anvin
Make both mktables.c and its output CodingStyle compliant. Update the copyright notice. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06coding style cleanups for drivers/md/mktables.cOliver Pinter
Signed-off-by: Oliver Pinter <oliver.pntr@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fbcon: fix color generation for monochrome framebufferThomas Pfaff
The current attr_fgcol_ec / attr_bgcol_ec macros do a simple shift of bits to get the color from vc_video_erase_char. For a monochrome display however the attribute does not contain any color, only attribute bits. Furthermore the reverse bit is lost because it is shifted out, the resulting color is always 0. This can bee seen on a monochrome console either directly or by setting it to inverse mode via "setterm -inversescreen on" . Text is written with correct color, fb_fillrects from a bit_clear / bit_clear_margins will get wrong colors. Signed-off-by: Thomas Pfaff <tpfaff@pcs.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06FB/S3C2410: check default_display parameter passed in platform dataBen Dooks
Ensure that the default display parameter passed in via the device's platform data is valid. It turns out when mach-bast.c was updated, the default_display was set outside of the display array bounds, causing a panic on startup. If the default_display is bigger than num_displays, then generate an error and refuse to initialise the driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Vincent Sanders <vince@simtec.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06FB/S3C2410: ensure S3C2410 framebuffer clears initial memory to blackBen Dooks
Change the initial pattern in the s3c2410 framebuffer driver to black. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Vincent Sanders <vince@simtec.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06FB/S3C2410: update debugging in S3C2410 framebuffer driverBen Dooks
Update the debugging in the s3c2410 framebuffer driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Vincent Sanders <vince@simtec.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06FB/S3C2412: add S3C2412 support to S3C2410 fb driverBen Dooks
Add support for the S3C2412 to the S3C2410 frame buffer driver by ensuring that any moved registers can be dealt with. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Vincent Sanders <vince@simtec.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06FB/SM501: ensure console suspended before saving stateBen Dooks
Move the console suspend to before we save the state of the framebuffer to ensure that it does not try and change the fb state again once we have copied it out. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Vincent Sanders <vince@simtec.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06pm2fb: big endian fixKrzysztof Helt
Fix garbled letters on big endian machines with acceleration enabled. This makes pm2fb works fine with full acceleration on sparc machine (card known as Sun PGX-32 or TechSource Raptor GFX-8P). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ps3fb: fix modedb typosGeoff Levand
Fix modedb typos Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ps3fb: cleanup sweepGeert Uytterhoeven
cleanup sweep: - Kill ps3fb_priv.xdr_ea and ps3fb_priv.xdr_size, use info->screen_base and info->fix.smem_len instead. - Kill superfluous assignments to info->fix.smem_start, info->fix.smem_len, and info->screen_base in ps3fb_set_par(). Their values never change. - Add sparse annotations to casts to kill address space warnings Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ps3fb: round up video modesGeert Uytterhoeven
Round up arbitrary video modes until they fit (if possible) Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ps3fb: reorganize modedb handlingGeert Uytterhoeven
Reorganize modedb handling: - Reorder the video modes in ps3fb_modedb, for easier indexing using PS3AV_MODE_* numbers, - Introduce ps3fb_native_vmode(), to convert from native (PS3AV_MODE_*) mode numbers to struct fb_videomode *, - Rename and move ps3fb_default_mode() to ps3fb_vmode(). Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ps3fb: add support for configurable black bordersGeert Uytterhoeven
Allow all video modes where the visible resolution plus the black borders matches a native resolution Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ps3fb: make frame buffer offsets unsigned intGeert Uytterhoeven
Frame buffer offsets don't have to be `unsigned long', `unsigned int' is sufficient Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ps3fb: kill ps3fb_resGeert Uytterhoeven
kill ps3fb_res[], as all information it contains can be obtained in some other way. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ps3fb: open-code macros that are used only onceGeert Uytterhoeven
Open-code the X_OFF(), Y_OFF(), WIDTH(), HEIGHT(), and VP_OFF() macros, as they're used in one place only Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ps3fb: kill PS3FB_FULL_MODE_BITGeert Uytterhoeven
Kill PS3FB_FULL_MODE_BIT, use PS3AV_MODE_FULL instead Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ps3: use symbolic names for video modesGeert Uytterhoeven
Use symbolic names for video modes Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ps3av: ps3av_get_scanmode() and ps3av_get_refresh_rate() are unusedGeert Uytterhoeven
ps3av_get_scanmode() and ps3av_get_refresh_rate() are unused, so remove them Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06atmel_lcdfb: backlight controlDavid Brownell
On the sam9 EK boards, the LCD backlight is hooked up to a PWM output from the LCD controller. It's controlled by "contrast" registers though. This patch lets boards declare that they have that kind of backlight control. The driver can then export this control, letting screenblank and other operations actually take effect ... reducing the typically substantial power drain from the backlight. Note that it's not fully cooked - doesn't force backlight off during system suspend - the "power" and "blank" events may not be done right This should be easily added in the future. [nicolas.ferre@atmel.com: remove unneeded inline and rename functions] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06sm501fb: clear framebuffer memory and paletteMagnus Damm
Avoid displaying garbage on unused framebuffers. For most users a single framebuffer is used together with fbcon. sm501fb supports two framebuffers where one often is assigned to fbcon and the other one is left unused during the boot. The problem here is that framebuffers not in use by fbcon happen to display garbage. This can easily be solved by making sure that framebuffer memory and palette ram are cleared. The problem can be observed by using looking at the panel output (fb1) after booting the kernel with fbcon on crt (fb0). This is the default configuration. It's also possible to watch the garbage on the crt framebuffer by passing "fbcon=map:1" on the kernel cmdline. This will assign fbcon to the panel (fb1) and leave the crt (fb0) unused. Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06sm501fb: control panel pin usage with platform data flagsMagnus Damm
This patch makes it possible to control panel pins usage with flags passed from the platform data. Without this patch the sm501fb driver always controls the VBIASEN and FPEN pins. The polarity and use of these pins are very platform specific, so this patch introduces the flags SM501FB_FLAG_PANEL_USE_VBIASEN and SM501FB_FLAG_PANEL_USE_FPEN which enable the use of these pins. This patch is needed to support the a Sharp LQ104V1DG21 lcd panel on SuperH platforms such as R2D-1 and R2D-PLUS boards. Letting the sm501fb driver control the FPEN and VBIASEN pins like today just results in lcd panel flicker. Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06drivers/video: add missing pci_dev_getJulia Lawall
pci_get_device does a pci_dev_get, so pci_dev_put needs to be called in an error case The problem was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @exists@ type T1,T2; identifier E; statement S,S1; expression x1,x2,x3; expression test; int ret != 0; @@ struct pci_dev *E; ... ( E = \(pci_get_slot\|pci_get_device\|pci_get_bus_and_slot\)(...); if (E == NULL) S | if ((E = \(pci_get_slot\|pci_get_device\|pci_get_bus_and_slot\)(...)) == NULL) S ) ... when != pci_dev_put(...,(T1)E,...) when != if (E != NULL) { ... pci_dev_put(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any ( if (E == NULL) S1 | if (test) + { ( + pci_dev_put(E); return; | + pci_dev_put(E); return ret; ) + } | if (test) { ... when != pci_dev_put(...,(T2)E,...) when != if (E != NULL) { ... pci_dev_put(...,(T2)E,...); ...} when != x2 = (T2)E ( + pci_dev_put(E); return; | + pci_dev_put(E); return ret; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06uvesafb: small cleanupsRandy Dunlap
Some cleanups in uvesafb: - The custom module_param() get/set functions don't need to be inlined since it is referred to via a pointer in a struct. - don't end a #define with a ';' - remove one of the single quote marks in "''ypan'" Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Michal Januszewski <spock@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06tdfxfb: fix section mismatch warningsRandy Dunlap
tdfxfb_setup() can be __init. This fixes the modpost section mismatch warnings: WARNING: vmlinux.o(.text+0x4cff9b): Section mismatch: reference to .init.data:mode_option (between 'tdfxfb_setup' and 'getclkMHz') WARNING: vmlinux.o(.text+0x4cffa8): Section mismatch: reference to .init.data: (between 'tdfxfb_setup' and 'getclkMHz') [krzysztof.h1@poczta.fm: use __init, not __devinit] Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>