aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-10-28Blackfin arch: Fix typo when adding CONFIG_DEBUG_VERBOSERobin Getz
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-27Blackfin arch: don't copy bss when copying L1Mike Frysinger
when copying L1 regions, go to the start of bss rather than end since we have code to zero it out already Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-27Blackfin arch: fix bug - Fail to boot jffs2 kernel for BF561 with SMP patchGraf Yang
only if the cplb block overlapped with kernel area, this cplb need be locked Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-27Blackfin arch: handle case of d_path() returning error in decode_address()Tim Pepper
d_path() can return an error. Most of its callers do something or other to make up something sane in that case. Do similar for blackfin's decode_address() call to d_path(). Signed-off-by: Tim Pepper <lnxninja@linux.vnet.ibm.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: prevent cifs_writepages() from skipping unwritten pages Fixed parsing of mount options when doing DFS submount [CIFS] Fix check for tcon seal setting and fix oops on failed mount from earlier patch [CIFS] Fix build break cifs: reinstate sharing of tree connections [CIFS] minor cleanup to cifs_mount cifs: reinstate sharing of SMB sessions sans races cifs: disable sharing session and tcon and add new TCP sharing code [CIFS] clean up server protocol handling [CIFS] remove unused list, add new cifs sock list to prepare for mount/umount fix [CIFS] Fix cifs reconnection flags [CIFS] Can't rely on iov length and base when kernel_recvmsg returns error
2008-11-18prevent cifs_writepages() from skipping unwritten pagesDave Kleikamp
Fixes a data corruption under heavy stress in which pages could be left dirty after all open instances of a inode have been closed. In order to write contiguous pages whenever possible, cifs_writepages() asks pagevec_lookup_tag() for more pages than it may write at one time. Normally, it then resets index just past the last page written before calling pagevec_lookup_tag() again. If cifs_writepages() can't write the first page returned, it wasn't resetting index, and the next call to pagevec_lookup_tag() resulted in skipping all of the pages it previously returned, even though cifs_writepages() did nothing with them. This can result in data loss when the file descriptor is about to be closed. This patch ensures that index gets set back to the next returned page so that none get skipped. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Acked-by: Jeff Layton <jlayton@redhat.com> Cc: Shirish S Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-18Fixed parsing of mount options when doing DFS submountIgor Mammedov
Since these hit the same routines, and are relatively small, it is easier to review them as one patch. Fixed incorrect handling of the last option in some cases Fixed prefixpath handling convert path_consumed into host depended string length (in bytes) Use non default separator if it is provided in the original mount options Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Igor Mammedov <niallain@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-17Remove -mno-spe flags as they dont belongKumar Gala
For some unknown reason at Steven Rostedt added in disabling of the SPE instruction generation for e500 based PPC cores in commit 6ec562328fda585be2d7f472cfac99d3b44d362a. We are removing it because: 1. It generates e500 kernels that don't work 2. its not the correct set of flags to do this 3. we handle this in the arch/powerpc/Makefile already 4. its unknown in talking to Steven why he did this Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Tested-and-Acked-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-17Merge branch 'for-linus' of git://git.o-hand.com/linux-mfdLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: Correct WM8350 I2C return code usage mfd: fix event masking for da9030
2008-11-17[CIFS] Fix check for tcon seal setting and fix oops on failed mount from ↵Steve French
earlier patch set tcon->ses earlier If the inital tree connect fails, we'll end up calling cifs_put_smb_ses with a NULL pointer. Fix it by setting the tcon->ses earlier. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: rtc: rtc-sun4v fixes, revised sparc: Fix tty compile warnings. sparc: struct device - replace bus_id with dev_name(), dev_set_name()
2008-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) rtnetlink: propagate error from dev_change_flags in do_setlink() isdn: remove extra byteswap in isdn_net_ciscohdlck_slarp_send_reply Phonet: refuse to send bigger than MTU packets e1000e: fix IPMI traffic e1000e: fix warn_on reload after phy_id error phy: fix phy address bug e100: fix dma error in direction for mapping igb: use dev_printk instead of printk qla3xxx: Cleanup: Fix link print statements. igb: Use device_set_wakeup_enable e1000: Use device_set_wakeup_enable e1000e: Use device_set_wakeup_enable via-velocity: enable perfect filtering for multicast packets phy: Add support for Marvell 88E1118 PHY mlx4_en: Pause parameters per port phylib: fix premature freeing of struct mii_bus atl1: Do not enumerate options unsupported by chip atl1e: fix broken multicast by removing unnecessary crc inversion gianfar: Fix DMA unmap invocations net/ucc_geth: Fix oops in uec_get_ethtool_stats() ...
2008-11-16rtnetlink: propagate error from dev_change_flags in do_setlink()Johannes Berg
Unlike ifconfig, iproute doesn't report an error when setting an interface up fails: (example: put wireless network mac80211 interface into repeater mode with iwconfig but do not set a peer MAC address, it should fail with -ENOLINK) without patch: # ip link set wlan0 up ; echo $? 0 # with patch: # ip link set wlan0 up ; echo $? RTNETLINK answers: Link has been severed 2 # Propagate the return value from dev_change_flags() to fix this. Signed-off-by: Patrick McHardy <kaber@trash.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16isdn: remove extra byteswap in isdn_net_ciscohdlck_slarp_send_replyHarvey Harrison
commit a144ea4b7a13087081ab5402fa9ad0bcfd249e67 [IPV4]: annotate struct in_ifaddr Missed this extra byteswap as the isdn inlines hide the htonl inside put_u32 which causes an extra byteswap on little-endian arches. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-17[CIFS] Fix build breakSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-16Phonet: refuse to send bigger than MTU packetsRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-17cifs: reinstate sharing of tree connectionsJeff Layton
Use a similar approach to the SMB session sharing. Add a list of tcons attached to each SMB session. Move the refcount to non-atomic. Protect all of the above with the cifs_tcp_ses_lock. Add functions to properly find and put references to the tcons. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-16e1000e: fix IPMI trafficJeff Kirsher
Some users reported that they have machines with BMCs enabled that cannot receive IPMI traffic after e1000e is loaded. http://marc.info/?l=e1000-devel&m=121909039127414&w=2 http://marc.info/?l=e1000-devel&m=121365543823387&w=2 This fixes the issue if they load with the new parameter = 0 by disabling crc stripping, but leaves the performance feature on for most users. Based on work done by Hong Zhang. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16e1000e: fix warn_on reload after phy_id errorJeff Kirsher
If the driver fails to initialize the first time due to the failure in the phy_id check the kernel triggers a warn_on on the second try to load the driver because the driver did not free the msi/x resources in the first load because of the previous failure in phy_id check. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16unitialized return value in mm/mlock.c: __mlock_vma_pages_range()Helge Deller
Fix an unitialized return value when compiling on parisc (with CONFIG_UNEVICTABLE_LRU=y): mm/mlock.c: In function `__mlock_vma_pages_range': mm/mlock.c:165: warning: `ret' might be used uninitialized in this function Signed-off-by: Helge Deller <deller@gmx.de> [ It isn't ever really used uninitialized, since no caller should ever call this function with an empty range. But the compiler is correct that from a local analysis standpoint that is impossible to see, and fixing the warning is appropriate. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-16stop_machine: fix race with return value (fixes Bug #11989)Rusty Russell
Bug #11989: Suspend failure on NForce4-based boards due to chanes in stop_machine We should not access active.fnret outside the lock; in theory the next stop_machine could overwrite it. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Tested-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-16Fix broken ownership of /proc/sys/ filesAl Viro
D'oh... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reported-and-tested-by: Peter Palfrader <peter@palfrader.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-16mfd: Correct WM8350 I2C return code usageMark Brown
The vendor BSP used for the WM8350 development provided an I2C driver which incorrectly returned zero on succesful sends rather than the number of transmitted bytes, an error which was then propagated into the WM8350 I2C accessors. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-16mfd: fix event masking for da9030Mike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-16acpi: fix oops in acpi_system_wakeup_device_seq_showLinus Torvalds
Commit 0794469da3f7b2093575cbdfc1108308dd3641ce: ("ACPI: struct device - replace bus_id with dev_name(), dev_set_name()") introduced a bug by testing 'dev_name(ldev)' instead of 'ldev->bus' for NULL when printing out the bus information. So if ldev->bus was NULL, we'd oops. Reported-and-tested-by: Bruno Prémont <bonbons@linux-vserver.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Len Brown <len.brown@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-16phy: fix phy address bugGiulio Benetti
PHYID returns 0xffff and not 0xffffffff when not found and in some case(at91sam9263) 0x0. Maybe this patch could be useful. Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16e100: fix dma error in direction for mappingJesse Brandeburg
The e100 driver triggers BUG_ON(buf->direction != dir) by doing pci_map_single(..., PCI_DMA_BIDIRECTIONAL) and pci_dma_sync_single_for_device(..., PCI_DMA_TODEVICE). Changing the DMA direction, especially with dmabounce will result in unexpected behaviour. Reported-by: Anders Grafstrom <grfstrm@users.sourceforge.net> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16igb: use dev_printk instead of printkBjorn Helgaas
Use dev_printk() instead of printk() to give a little more context and use consistent format. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16qla3xxx: Cleanup: Fix link print statements.Ron Mercer
Removed debug print statements and improved conditionals around informational statements. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16igb: Use device_set_wakeup_enable\"Rafael J. Wysocki\
Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using igb_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16e1000: Use device_set_wakeup_enable\"Rafael J. Wysocki\
Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using e1000_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16e1000e: Use device_set_wakeup_enable\"Rafael J. Wysocki\
Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using e1000_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16via-velocity: enable perfect filtering for multicast packetsJoey Zhuo
Signed-off-by: Joey Zhuo <joeyzhuo@via.com.tw> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: don't grab devices with no input HID: fix radio-mr800 hidquirks HID: fix kworld fm700 radio hidquirks HID: fix start/stop cycle in usbhid driver HID: use single threaded work queue for hid_compat HID: map macbook keys for "Expose" and "Dashboard" HID: support for new unibody macbooks HID: fix locking in hidraw_open()
2008-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: ensure correct logging in do_io_probe pcmcia: add another pata/ide ID pcmcia: add braces in error path pcmcia: struct device - replace bus_id with dev_name(), dev_set_name() pcmcia: setup resource information for pseudo multifunction devices. pcmcia: fix indentation & braces disagreement - add braces
2008-11-15phy: Add support for Marvell 88E1118 PHYRon Madrid
This patch will add support for the Marvell 88E1118 PHY which supports gigabit ethernet among other things. Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-15mlx4_en: Pause parameters per portYevgeny Petrilin
Before the change the driver reported the same pause parameters for all the ports, even only one of them was modified. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-15Linux 2.6.28-rc5Linus Torvalds
2008-11-15Fix inotify watch removal/umount racesAl Viro
Inotify watch removals suck violently. To kick the watch out we need (in this order) inode->inotify_mutex and ih->mutex. That's fine if we have a hold on inode; however, for all other cases we need to make damn sure we don't race with umount. We can *NOT* just grab a reference to a watch - inotify_unmount_inodes() will happily sail past it and we'll end with reference to inode potentially outliving its superblock. Ideally we just want to grab an active reference to superblock if we can; that will make sure we won't go into inotify_umount_inodes() until we are done. Cleanup is just deactivate_super(). However, that leaves a messy case - what if we *are* racing with umount() and active references to superblock can't be acquired anymore? We can bump ->s_count, grab ->s_umount, which will almost certainly wait until the superblock is shut down and the watch in question is pining for fjords. That's fine, but there is a problem - we might have hit the window between ->s_active getting to 0 / ->s_count - below S_BIAS (i.e. the moment when superblock is past the point of no return and is heading for shutdown) and the moment when deactivate_super() acquires ->s_umount. We could just do drop_super() yield() and retry, but that's rather antisocial and this stuff is luser-triggerable. OTOH, having grabbed ->s_umount and having found that we'd got there first (i.e. that ->s_root is non-NULL) we know that we won't race with inotify_umount_inodes(). So we could grab a reference to watch and do the rest as above, just with drop_super() instead of deactivate_super(), right? Wrong. We had to drop ih->mutex before we could grab ->s_umount. So the watch could've been gone already. That still can be dealt with - we need to save watch->wd, do idr_find() and compare its result with our pointer. If they match, we either have the damn thing still alive or we'd lost not one but two races at once, the watch had been killed and a new one got created with the same ->wd at the same address. That couldn't have happened in inotify_destroy(), but inotify_rm_wd() could run into that. Still, "new one got created" is not a problem - we have every right to kill it or leave it alone, whatever's more convenient. So we can use idr_find(...) == watch && watch->inode->i_sb == sb as "grab it and kill it" check. If it's been our original watch, we are fine, if it's a newcomer - nevermind, just pretend that we'd won the race and kill the fscker anyway; we are safe since we know that its superblock won't be going away. And yes, this is far beyond mere "not very pretty"; so's the entire concept of inotify to start with. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-15LIS3LV02Dx: remove unused #include <version.h>Huang Weiyi
The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/hwmon/lis3lv02d.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-15Merge branch 'sh/for-2.6.28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: Reorder the SCxTDR write after the TDxE clear. sh: __copy_user function can corrupt the stack in case of exception sh: Fixed the TMU0 reload value on resume sh: Don't factor in PAGE_OFFSET for valid_phys_addr_range() check. sh: early printk port type fix i2c: fix i2c-sh_mobile rx underrun sh: Provide a sane valid_phys_addr_range() to prevent TLB reset with PMB. usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USB fix sci type for SH7723 serial: sh-sci: fix cannot work SH7723 SCIFA sh: Handle fixmap TLB eviction more coherently.
2008-11-15Merge branch 'doc-subdirs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs * 'doc-subdirs' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs: Create/use more directory structure in the Documentation/ tree.
2008-11-15Add 'pr_fmt()' format modifier to pr_xyz macros.Martin Schwidefsky
A common reason for device drivers to implement their own printk macros is the lack of a printk prefix with the standard pr_xyz macros. Introduce a pr_fmt() macro that is applied for every pr_xyz macro to the format string. The most common use of the pr_fmt macro would be to add the name of the device driver to all pr_xyz messages in a source file. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: restrict RDMA usage
2008-11-15Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (9624): CVE-2008-5033: fix OOPS on tvaudio when controlling bass/treble V4L/DVB (9623): tvaudio: Improve debug msg by printing something more human V4L/DVB (9622): tvaudio: Improve comments and remove a unneeded prototype V4L/DVB (9621): Avoid writing outside shadow.bytes[] array V4L/DVB (9620): tvaudio: use a direct reference for chip description V4L/DVB (9619): tvaudio: update initial comments V4L/DVB (9618): tvaudio: add additional logic to avoid OOPS V4L/DVB (9617): tvtime: remove generic_checkmode callback V4L/DVB (9616): tvaudio: cleanup - group all callbacks together V4L/DVB (9615): tvaudio: instead of using a magic number, use ARRAY_SIZE V4L/DVB (9613): tvaudio: fix a memory leak
2008-11-15Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] fix s390x_newuname [S390] dasd: log sense for fatal errors [S390] cpu topology: fix locking [S390] cio: Fix refcount after moving devices. [S390] ftrace: fix kernel stack backchain walking [S390] ftrace: disable tracing on idle psw [S390] lockdep: fix compile bug [S390] kvm_s390: Fix oops in virtio device detection with "mem=" [S390] sclp: emit error message if assign storage fails [S390] Fix range for add_active_range() in setup_memory()
2008-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] dpt_i2o: fix transferred data length for scsi_set_resid() [SCSI] scsi_error regression: Fix idempotent command handling [SCSI] zfcp: Fix hexdump data in s390dbf traces [SCSI] zfcp: fix erp timeout cleanup for port open requests [SCSI] zfcp: Wait for port scan to complete when setting adapter online [SCSI] zfcp: Fix cast warning [SCSI] zfcp: Fix request list handling in error path [SCSI] zfcp: fix mempool usage for status_read requests [SCSI] zfcp: fix req_list_locking. [SCSI] zfcp: Dont clear reference from SCSI device to unit [SCSI] qla2xxx: Update version number to 8.02.01-k9. [SCSI] qla2xxx: Return a FAILED status when abort mailbox-command fails. [SCSI] qla2xxx: Do not honour max_vports from firmware for 2G ISPs and below. [SCSI] qla2xxx: Use pci_disable_rom() to manipulate PCI config space. [SCSI] qla2xxx: Correct Atmel flash-part handling. [SCSI] megaraid: fix mega_internal_command oops
2008-11-15Revert "x86: blacklist DMAR on Intel G31/G33 chipsets"David Woodhouse
This reverts commit e51af6630848406fc97adbd71443818cdcda297b, which was wrongly hoovered up and submitted about a month after a better fix had already been merged. The better fix is commit cbda1ba898647aeb4ee770b803c922f595e97731 ("PCI/iommu: blacklist DMAR on Intel G31/G33 chipsets"), where we do this blacklisting based on the DMI identification for the offending motherboard, since sometimes this chipset (or at least a chipset with the same PCI ID) apparently _does_ actually have an IOMMU. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-15mm: remove unevictable's show_page_pathKOSAKI Motohiro
Hugh Dickins reported show_page_path() is buggy and unsafe because - lack dput() against d_find_alias() - don't concern vma->vm_mm->owner == NULL - lack lock_page() it was only for debugging, so rather than trying to fix it, just remove it now. Reported-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> CC: Lee Schermerhorn <Lee.Schermerhorn@hp.com> CC: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-15misc: C2port needs <linux/sched.h>Geert Uytterhoeven
m68k allmodconfig: | drivers/misc/c2port/core.c: In function 'c2port_reset': | drivers/misc/c2port/core.c:73: error: dereferencing pointer to incomplete type | drivers/misc/c2port/core.c: In function 'c2port_strobe_ck': | drivers/misc/c2port/core.c:91: error: dereferencing pointer to incomplete type Include <linux/sched.h> to fix it, as m68k's local_irq_enable() needs to know about struct task_struct. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>