aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-11-18Merge branch 'sh/for-2.6.32' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fixup last users of irq_chip->typename uio: pm_runtime_disable is needed if failed
2009-11-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: option.c: add support for D-Link DWM-162-U5 USB: usbmon: fix bug in mon_buff_area_shrink USB: xhci: Fix scratchpad deallocation. USB: xhci: Fix TRB physical to virtual address translation. USB: xhci: Fix bug memory free after failed initialization. USB: cdc_acm: Fix memory leak after hangup USB: cdc_acm: Fix race condition when opening tty USB: ohci: quirk AMD prefetch for USB 1.1 ISO transfer
2009-11-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty: cp210x: Fix carrier handling tty_port: If we are opened non blocking we still need to raise the carrier
2009-11-18sh: Fixup last users of irq_chip->typenameThomas Gleixner
The typename member of struct irq_chip was kept for migration purposes and is obsolete since more than 2 years. Fix up the leftovers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-17fcntl: rename F_OWNER_GID to F_OWNER_PGRPPeter Zijlstra
This is for consistency with various ioctl() operations that include the suffix "PGRP" in their names, and also for consistency with PRIO_PGRP, used with setpriority() and getpriority(). Also, using PGRP instead of GID avoids confusion with the common abbreviation of "group ID". I'm fine with anything that makes it more consistent, and if PGRP is what is the predominant abbreviation then I see no need to further confuse matters by adding a third one. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-17procfs: fix /proc/<pid>/stat stack pointer for kernel threadsStefani Seibold
Fix a small issue for the stack pointer in /proc/<pid>/stat. In case of a kernel thread the value of the printed stack pointer should be 0. Signed-off-by: Stefani Seibold <stefani@seibold.net> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-17mm: allow memory hotplug and hibernation in the same kernelAndi Kleen
Allow memory hotplug and hibernation in the same kernel Memory hotplug and hibernation were exclusive in Kconfig. This is obviously a problem for distribution kernels who want to support both in the same image. After some discussions with Rafael and others the only problem is with parallel memory hotadd or removal while a hibernation operation is in process. It was also working for s390 before. This patch removes the Kconfig level exclusion, and simply makes the memory add / remove functions grab the pm_mutex to exclude against hibernation. Fixes a regression - old kernels didn't exclude memory hotadd and hibernation. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-17workqueue: fix race condition in schedule_on_each_cpu()Tejun Heo
Commit 65a64464349883891e21e74af16c05d6e1eeb4e9 ("HWPOISON: Allow schedule_on_each_cpu() from keventd") which allows schedule_on_each_cpu() to be called from keventd added a race condition. schedule_on_each_cpu() may race with cpu hotplug and end up executing the function twice on a cpu. Fix it by moving direct execution into the section protected with get/put_online_cpus(). While at it, update code such that direct execution is done after works have been scheduled for all other cpus and drop unnecessary cpu != orig test from flush loop. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-17mm/memory_hotplug: fix section mismatchHidetoshi Seto
With CONFIG_MEMORY_HOTPLUG I got following warning: WARNING: vmlinux.o(.text+0x1276b0): Section mismatch in reference from the function hotadd_new_pgdat() to the function .meminit.text:free_area_init_node() The function hotadd_new_pgdat() references the function __meminit free_area_init_node(). This is often because hotadd_new_pgdat lacks a __meminit annotation or the annotation of free_area_init_node is wrong. Use __ref to fix this. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-17MAINTAINERS: KMEMCHECK: add file patterns, use M: for Pekka's name and addressJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-17drivers/video/da8xx-fb.c: fix error returnRoel Kluin
The return should be negative on errors Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-17spi: error status should be negativeRoel Kluin
Return a negative error value instead of a positive Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: dmitry pervushin <dpervushin@embeddedalley.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-17USB: option.c: add support for D-Link DWM-162-U5Zhang Le
Add D-Link DWM-162-U5 device id 1e0e:ce16 into option driver. The device has 4 interfaces, of which 1 is handled by storage and the other 3 by option driver. The device appears first as CD-only 05c6:2100 device and must be switched to 1e0e:ce16 mode either by using "eject CD" or usb_modeswitch. The MessageContent for usb_modeswitch.conf is: "55534243e0c26a85000000000000061b000000020000000000000000000000" Signed-off-by: Zhang Le <r0bertz@gentoo.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-17USB: usbmon: fix bug in mon_buff_area_shrinkAlan Stern
This patch (as1299b) fixes a bug in an error-handling path of usbmon's binary interface. The storage area for URB data is divided into fixed-size blocks. If an URB's data can't be copied, the area reserved for it should be decreased to the size of the truncated information (rounded up to a block boundary). Rounding up the amount to be removed and subtracting it from the reserved size is definitely the wrong thing to do. Also, when the data for an isochronous URB can't be copied, we can still copy the isoc packet descriptors. In fact the current code does copy the descriptors, but then sets the capture length to 0 so they remain inaccessible. The capture length should be reduced to the length of the descriptors, not set to 0. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Pete Zaitcev <zaitcev@redhat.com> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-17USB: xhci: Fix scratchpad deallocation.Sarah Sharp
The scratchpad_free() function uses xhci->page_size to free some memory with pci_free_consistent(). However, the page_size is set to zero before the call, causing kernel oopses on driver unload. Call scratchpad_free() before setting xhci->page_size to zero. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: John Youn <John.Youn@synopsys.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-17USB: xhci: Fix TRB physical to virtual address translation.Sarah Sharp
The trb_in_td() function in the xHCI driver is supposed to translate a physical transfer buffer request (TRB) into a virtual pointer to the ring segment that TRB is in. Unfortunately, a mistake in this function may cause endless loops as the driver searches through the linked list of ring segments over and over again. Fix a couple bugs that may lead to loops or bad output: 1. Bail out if we get a NULL pointer when translating the segment's private structure and the starting DMA address of the segment chunk. If this happens, we've been handed a starting TRB pointer from a different ring. 2. Make sure the function works when there's multiple segments in the ring. In the while loop to search through the ring segments, use the current segment variable (cur_seg), rather than the starting segment variable (start_seg) that is passed in. 3. Stop searching the ring if we've run through all the segments in the ring. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-17USB: xhci: Fix bug memory free after failed initialization.Sarah Sharp
If the xHCI driver fails during the memory initialization, xhci->ir_set may not be a valid pointer. Check that it points to valid DMA'able memory before writing to that address during the memory freeing process. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-17USB: cdc_acm: Fix memory leak after hangupFrancesco Lavra
Am Donnerstag, 10. September 2009 15:43:53 schrieb Dietmar Hilbrich: > Hello, > > i have the following problem with the cdc-acm - driver: > > I'm using the driver with an "Ericsson F3507G" on a Thinkpad T400. > > If a disable the device (with the RFKill-Switch) while it is used by a > programm like ppp, the driver doesn't seem to correctly clean up the tty, > even after the program has been closed) > > The tty is still active (e.g. there still exists an entry in > /sys/dev/char/166:0 if ttyACM0 was used) and if a reacticate the device, > this device entry will be skipped and the Device-Nodes ttyACM1, ttyACM2 > and ttyACM3 will be used. > > This problem was introduced with the commit > 10077d4a6674f535abdbe25cdecb1202af7948f1 (before 2.6.31-rc1) and still > exists in 2.6.31. > > I was able the fix this problem with the following patch: > > diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c > index 2bfc41e..0970d2f 100644 > --- a/drivers/usb/class/cdc-acm.c > +++ b/drivers/usb/class/cdc-acm.c > @@ -676,6 +676,7 @@ static void acm_tty_hangup(struct tty_struct *tty) > struct acm *acm = tty->driver_data; > tty_port_hangup(&acm->port); > acm_port_down(acm, 0); > + acm_tty_unregister(acm); > } I have the same problem with cdc-acm (I'm using a Samsung SGH-U900): when I unplug it from the USB port during a PPP connection, the ppp daemon gets the hangup correctly (and closes the device), but the struct acm corresponding to the device disconnected is not freed. Hence reconnecting the device results in creation of /dev/ttyACM(x+1). The same happens when the system is hibernated during a PPP connection. This memory leak is due to the fact that when the tty is hung up, tty_port_close_start() returns always zero, and acm_tty_close() never reaches the point where acm_tty_unregister() is called. Here is a fix for this. Signed-off-by: Francesco Lavra <francescolavra@interfree.it> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-17USB: cdc_acm: Fix race condition when opening ttyHenry Gebhardt
If acm_rx_tasklet() gets called before tty_port_block_til_ready() returns, then bulk IN urbs may not be sent. This fixes it. Signed-off-by: Henry Gebhardt <gebhardt@astro.uni-tuebingen.de> Acked-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-17USB: ohci: quirk AMD prefetch for USB 1.1 ISO transferLibin Yang
The following patch in the driver is required to avoid USB 1.1 device failures that may occur due to requests from USB OHCI controllers may be overwritten if the latency for any pending request by the USB controller is very long (in the range of milliseconds). Signed-off-by: Libin Yang <libin.yang@amd.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-17tty: cp210x: Fix carrier handlingAlan Cox
Original discussion: http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248 or http://marc.info/?l=linux-usb&m=125553790714133&w=2 9a68e39d4a701fb3be03cae9b462408664ebd205 broke carrier handling so that a cp210x setup which needed the carrier lines set up (non CLOCAL) which did not make a call which set the termios bits left the lines down even if CLOCAL was not asserted. Fix this not by reverting but by adding the proper dtr_rts and carrier_raised methods. This both sets the modem lines properly and also implements the correct blocking semantics for the port as required by POSIX. Signed-off-by: Alan Cox <alan@linux.intel.com> Reported-by: Karl Hiramoto <karl@hiramoto.org> Tested-by: Karl Hiramoto <karl@hiramoto.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-17tty_port: If we are opened non blocking we still need to raise the carrierAlan Cox
Original discussion: http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248 or http://marc.info/?l=linux-usb&m=125553790714133&w=2 The tty_port code inherited a bug common to various drivers it was based upon. If the tty is opened O_NONBLOCK we do not wait for the carrier to be raised but we must still raise our modem lines if appropriate. (There is a second question here about whether we should do so if CLOCAL is set but that can wait) Signed-off-by: Alan Cox <alan@linux.intel.com> Reported-by: Karl Hiramoto <karl@hiramoto.org> Tested-by: Karl Hiramoto <karl@hiramoto.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] bfa: declare MODULE_FIRMWARE [SCSI] gdth: Prevent negative offsets in ioctl CVE-2009-3080 [SCSI] libsas: do not set res = 0 in sas_ex_discover_dev() [SCSI] Fix incorrect reporting of host protection capabilities [SCSI] pmcraid: Fix ppc64 driver build for using cpu_to_le32 on U8 data type [SCSI] ipr: add workaround for MSI interrupts on P7 [SCSI] scsi_transport_fc: Fix WARN message for FC passthru failure paths [SCSI] bfa: fix test in bfad_os_fc_host_init()
2009-11-17Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: copy li_lsn before dropping AIL lock XFS bug in log recover with quota (bugzilla id 855)
2009-11-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: lifebook - fix settings for CF-72 Input: psmouse - fix breakage introduced by b7802c5c1ea
2009-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: clear server inode number flag while autodisabling
2009-11-17Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: ensure mfp is in correct range in mfp_{read,write} [ARM] pxa/hx4700: fix hx4700 touchscreen pressure values ARM: 5787/1: U300 COH 901 331 fixes ARM: Fix warning in sa1100-flash.c [ARM] Kirkwood: disable propagation of mbus error to the CPU local bus [ARM] pxa: fix incorrect mfp_to_gpio() conversion [ARM] pxa/colibri: fix AC97 ifdefs and add missing include [ARM] pxa: fix missing underscores in mfp-pxa910.h [ARM] pxa: fix interrupts number calculation when CONFIG_PXA_HAVE_ISA_IRQS=y
2009-11-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: dereferencing freed memory regulator_fixed_voltage_remove() regulator: Fix check of unsigned return value and transmit errors in wm831x_gp_ldo_get_mode() regulator: Handle missing constraints in _regulator_disable()
2009-11-17Merge branch 'for-linus' of git://github.com/at91linux/linux-2.6-at91Linus Torvalds
* 'for-linus' of git://github.com/at91linux/linux-2.6-at91: at91: at91sam9g20ek modify dual slot evaluation kit
2009-11-17Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (adt7475) Fix sysfs file names hwmon: (adt7475) Cache limits for 60 seconds hwmon: (adt7475) Fix temperature fault flags hwmon: (s3c-hwmon) Ignore invalid divider settings
2009-11-17Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds-gpio: fix possible crash on OF device unbinding backlight: Fix backlight limiting on spitz/corgi devices backlight: lcd - Fix wrong sizeof
2009-11-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: ice1724 - make some bitfields unsigned ALSA: hda - Dell Studio 1557 hd-audio quirk ALSA: ice1724 - Fix section mismatch in prodigy_hd2_resume() ALSA: hda - Add another Nvidia HDMI codec id (10de:0005) ALSA: hda: Use model=mb5 for MacBookPro 5,2
2009-11-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: deleted inconsistent comment in nilfs_load_inode_block() nilfs2: deleted struct nilfs_dat_group_desc nilfs2: fix lock order reversal in chcp operation
2009-11-17Merge branch 'hostprogs-wmissing-prototypes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/josh/linux-misc * 'hostprogs-wmissing-prototypes' of git://git.kernel.org/pub/scm/linux/kernel/git/josh/linux-misc: Makefile: Add -Wmising-prototypes to HOSTCFLAGS oss: Mark loadhex static in hex2hex.c dtc: Mark various internal functions static dtc: Set "noinput" in the lexer to avoid an unused function drm: radeon: Mark several functions static in mkregtable arch/sparc/boot/*.c: Mark various internal functions static arch/powerpc/boot/addRamDisk.c: Mark several internal functions static arch/alpha/boot/tools/objstrip.c: Mark "usage" static Documentation/vm/page-types.c: Declare checked_open static genksyms: Mark is_reserved_word static kconfig: Mark various internal functions static kconfig: Make zconf.y work with current bison
2009-11-17fcntl: Use consistent values for F_[GS]ETOWN_EXStephen Rothwell
These values were only introduced during this release cycle, so it is still early enough to get them right. alpha uses the same values that are in asm-generic/fcntl.h, so just remove them. parisc uses the values interchanged for no apparent reason, so remove them to give us consistency across all architectures. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-17xfs: copy li_lsn before dropping AIL lockNathaniel W. Turner
Access to log items on the AIL is generally protected by m_ail_lock; this is particularly needed when we're getting or setting the 64-bit li_lsn on a 32-bit platform. This patch fixes a couple places where we were accessing the log item after dropping the AIL lock on 32-bit machines. This can result in a partially-zeroed log->l_tail_lsn if xfs_trans_ail_delete is racing with xfs_trans_ail_update, and in at least some cases, this can leave the l_tail_lsn with a zero cycle number, which means xlog_space_left will think the log is full (unless CONFIG_XFS_DEBUG is set, in which case we'll trip an ASSERT), leading to processes stuck forever in xlog_grant_log_space. Thanks to Adrian VanderSpek for first spotting the race potential and to Dave Chinner for debug assistance. Signed-off-by: Nathaniel W. Turner <nate@houseofnate.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-11-17XFS bug in log recover with quota (bugzilla id 855)Jan Rekorajski
Hi, I was hit by a bug in linux 2.6.31 when XFS is not able to recover the log after a crash if fs was mounted with quotas. Gory details in XFS bugzilla: http://oss.sgi.com/bugzilla/show_bug.cgi?id=855. It looks like wrong struct is used in buffer length check, and the following patch should fix the problem. xfs_dqblk_t has a size of 104+32 bytes, while xfs_disk_dquot_t is 104 bytes long, and this is exactly what I see in system logs - "XFS: dquot too small (104) in xlog_recover_do_dquot_trans." Signed-off-by: Jan Rekorajski <baggins@sith.mimuw.edu.pl> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-11-16Input: lifebook - fix settings for CF-72Abner Holsinger
Panasonic CF-72 uses 6-byte protocol and does not need to be tied to a particular port. Signed-off-by: Abner Holsinger <9zabner@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-16Input: psmouse - fix breakage introduced by b7802c5c1eaJiri Kosina
Commit b7802c5c1ea ("Input: psmouse - use boolean type") caused the synaptics_hardware variable to be completely useless, as it is constantly set to 'true' throughout the whole psmouse_extensions(). This was caused by the following hunk in the commit in question - int synaptics_hardware = 0; + bool synaptics_hardware = true; which is wrong and causes driver to issue extra reset when falling back to bare PS/2 protocol. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-16Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-11-17[ARM] pxa: ensure mfp is in correct range in mfp_{read,write}Roel Kluin
Ensure we do not read/write outside array boundaries with a negative index. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-17[ARM] pxa/hx4700: fix hx4700 touchscreen pressure valuesPaul Parsons
hx4700 touchscreen events were being dropped in ads7846_rx() because their pressure values consistently exceeded the platform maximum of 512; a sample of 256 pressure values were in the range 531 to 815. Doubling the platform maximum to 1024 allows hx4700 touchscreen events to pass the test. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-16Merge branch 'for-rmk' of git://git.marvell.com/orionRussell King
2009-11-16ARM: 5787/1: U300 COH 901 331 fixesLinus Walleij
This will fix some small issues with the COH 901 331 RTC driver: - Interrupt is disabled after alarm so that we don't fire multiple interrupts. - We return 0 from the coh901331_alarm_irq_enable() ridding a compile warning. - We alter the name in the U300 device registry to match that of the driver so they sucessfully resolve. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-16ARM: Fix warning in sa1100-flash.cRussell King
drivers/mtd/maps/sa1100-flash.c: In function 'sa1100_probe_subdev': drivers/mtd/maps/sa1100-flash.c:214: warning: format '%d' expects type 'int', but argument 3 has type 'uint64_t' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-16at91: at91sam9g20ek modify dual slot evaluation kitNicolas Ferre
at91sam9g20ek rev. C and onwards embed two SD/MMC slots. This patch modify the previous dual slot board definition to match the official rev. C board. It also allows the use of at91_mci SD/MMC driver in addition to the atmel-mci one. Some pins have been re-affected from leds or Ethernet phy IRQ to the SD/MMC slot A. This lead to a modification of those definitions. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-11-16cifs: clear server inode number flag while autodisablingSuresh Jayaraman
Fix the commit ec06aedd44 that intended to turn off querying for server inode numbers when server doesn't consistently support inode numbers. Presumably the commit didn't actually clear the CIFS_MOUNT_SERVER_INUM flag, perhaps a typo. Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Acked-by: Jeff Layton <jlayton@redhat.com> Cc: Stable <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-11-16dereferencing freed memory regulator_fixed_voltage_remove()Dan Carpenter
Don't dereference drvdata after it has been freed. regards, dan carpenter Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-11-16leds-gpio: fix possible crash on OF device unbindingDmitry Eremin-Solenikov
If there are leds present in the OF tree, but the GPIOs for (some) of them are unavailable, led_data doesn't get populated with correct devices. Then, on device unbinding, one can crash the kernel. Workaround this by setting led->gpio to invalid value early. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-11-16backlight: Fix backlight limiting on spitz/corgi devicesPavel Machek
On spitz (& similar) machines, if battery is running low, backlight needs to be limited to lower step. Unfortunately, current code uses &= for limiting, turning backlight off completely for some backlight settings. Fix that. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 01:35:46 +0000