aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-01-30x86: remove obsolete nohpet declarationThomas Gleixner
Lonely user is hpet.c, so no need to declare it elsewhere. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: move pmtmr related declarationsThomas Gleixner
Move more stuff out of proto.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: move tsc related declarationsThomas Gleixner
tsc has also it's own header file. Nuke the stupid 64 bit ifdef while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: move pda related declarationThomas Gleixner
pda has its own header file as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: move page related declarationThomas Gleixner
end_pfn is in page.h, so end_pfn_map has a place there as well Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: move numa related declarationsThomas Gleixner
More stuff shuffeled to the correct place Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: move mce related declarationsThomas Gleixner
Move the mce related declarations where they belong, fix the users and remove 32bit dependency in mce.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: move debug related declarations to kdebug.hThomas Gleixner
Move them and fixup some users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: move k8 related declarationsThomas Gleixner
Move k8 related declarations to k8.h and fix numa_64.c Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: move idle related declarationsThomas Gleixner
Move idle related declarations to processor_64.h, where the the others are as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: make early_indentify_cpu staticThomas Gleixner
early_indentify_cpu is only used in setup_64.c Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: move acpi and pci declarationsThomas Gleixner
Move acpi/pci related declarations to the correct headers and remove the duplicate. Build fix from: Andrew Morton Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: remove duplicated declarationsThomas Gleixner
Remove declarations which are made already in the appropriate header file. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: merge apic_32/64.hThomas Gleixner
Unify apic.h variants. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: use u32 for some lapic functionsThomas Gleixner
Use u32 so 32 and 64bit have the same interface. Andrew Morton: xen, lguest build fixes Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: use u32 for safe_apic_wait_icr_idle()Thomas Gleixner
Preperatory patch for merging apic headers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: rename get_maxlvt to lapic_get_maxlvtThomas Gleixner
Use the same name for the 32 and 64 bit variant. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: prepare unification of include/asm-x86/apic_32/64.hThomas Gleixner
White space and coding style clenaup. Move the K8 local apic defines to apicdef.h, where they belong Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: unify include/asm-x86/apicdef_32/64.hThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: merge arch/x86/kernel/ldt_32/64.cThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: prepare arch/x86/kernel/ldt_32/64.c for mergingThomas Gleixner
White space and coding style cleanups. Change unsigned to int. There is no win when we compare mincount against pc->size, which is an int as well. Casting pc->size to unsigned just might hide real problems. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: introduce ldt_write accessorThomas Gleixner
Create a ldt write accessor like the 32 bit one. Preparatory patch for merging ldt.c and anyway necessary for 64bit paravirt ops. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: clean up include/asm-x86/desc_64.hThomas Gleixner
White space and coding style clenaup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: clean up arch/x86/kernel/ldt_32/64.cThomas Gleixner
White space and coding style clenaup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: clean up arch/x86/kernel/e820_64.cThomas Gleixner
White space and coding style cleanup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: code cleanups in arch/x86/kernel/pci-gart_64.cIngo Molnar
code cleanups: errors lines of code errors/KLOC arch/x86/kernel/pci-gart_64.c 183 748 244.6 arch/x86/kernel/pci-gart_64.c 0 790 0 Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: lindent arch/i386/math-emu, cleanupIngo Molnar
manually clean up some of the damage that lindent caused. (this is a separate commit so that in the unlikely case of a typo we can bisect it down to the manual edits.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: lindent arch/i386/math-emuIngo Molnar
lindent these files: errors lines of code errors/KLOC arch/x86/math-emu/ 2236 9424 237.2 arch/x86/math-emu/ 128 8706 14.7 no other changes. No code changed: text data bss dec hex filename 5589802 612739 3833856 10036397 9924ad vmlinux.before 5589802 612739 3833856 10036397 9924ad vmlinux.after the intent of this patch is to ease the automated tracking of kernel code quality - it's just much easier for us to maintain it if every file in arch/x86 is supposed to be clean. NOTE: it is a known problem of lindent that it causes some style damage of its own, but it's a safe tool (well, except for the gcc array range initializers extension), so we did the bulk of the changes via lindent, and did the manual fixups in a followup patch. the resulting math-emu code has been tested by Thomas Gleixner on a real 386 DX CPU as well, and it works fine. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: mach-voyager, lindentIngo Molnar
lindent the mach-voyager files to get rid of more than 300 style errors: errors lines of code errors/KLOC arch/x86/mach-voyager/ [old] 409 3729 109.6 arch/x86/mach-voyager/ [new] 71 3678 19.3 Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: clean up arch/x86/kernel/aperture_64.c printk()sIngo Molnar
clean up arch/x86/kernel/aperture_64.c printk()s. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: clean up arch/x86/kernel/aperture_64.cIngo Molnar
whitespace cleanup. No code changed: text data bss dec hex filename 2080 76 4 2160 870 aperture_64.o.before 2080 76 4 2160 870 aperture_64.o.after errors lines of code errors/KLOC arch/x86/kernel/aperture_64.c 114 299 381.2 arch/x86/kernel/aperture_64.c 0 315 0 Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: clean up arch/x86/ia32/mmap32.cThomas Gleixner
White space and coding style clenaup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: clean up arch/x86/ia32/syscall32.cThomas Gleixner
White space and coding style clenaup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: clean up arch/x86/ia32/sys_ia32.cThomas Gleixner
White space and coding style clenaup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: clean up arch/x86/ia32/ptrace32.cThomas Gleixner
White space and coding style clenaup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: clean up arch/x86/ia32/ipc32.cThomas Gleixner
White space and coding style cleanup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: clean up arch/x86/ia32/ia32_signal.cThomas Gleixner
White space and coding style clenaup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: clean up arch/x86/ia32/aout32.cThomas Gleixner
White space and coding style clenaup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: clean up arch/x86/ia32/fpu32.cThomas Gleixner
White space and coding style clenaup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: unify asm/cpufeature.hH. Peter Anvin
asm/cpufeature.h was already almost unified; this completes the job. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add <asm/asm.h>H. Peter Anvin
Create <asm/asm.h>, with common definitions suitable for assembly unification. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: enable irq in default_idle on 64-bitHiroshi Shimamoto
local_irq_enable() is missing after sched_clock_idle_wakeup_event(). Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: idle wakeup event in the HLT loopIngo Molnar
do a proper idle-wakeup event on HLT as well - some CPUs stop the TSC in HLT too, not just when going through the ACPI methods. (the ACPI idle code already does this.) [ update the 64-bit side too, as noticed by Jiri Slaby. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: scale cyc_2_nsec according to CPU frequencyGuillaume Chazarain
scale the sched_clock() cyc_2_nsec scaling factor according to CPU frequency changes. [ mingo@elte.hu: simplified it and fixed it for SMP. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: protect against sigaltstack wraparoundRoland McGrath
cf http://lkml.org/lkml/2007/10/3/41 To summarize: on Linux, SA_ONSTACK decides whether you are already on the signal stack based on the value of the SP at the time of a signal. If you are not already inside the range, you are not "on the signal stack" and so the new signal handler frame starts over at the base of the signal stack. sigaltstack (and sigstack before it) was invented in BSD. There, the SA_ONSTACK behavior has always been different. It uses a kernel state flag to decide, rather than the SP value. When you first take an SA_ONSTACK signal and switch to the alternate signal stack, it sets the SS_ONSTACK flag in the thread's sigaltstack state in the kernel. Thereafter you are "on the signal stack" and don't switch SP before pushing a handler frame no matter what the SP value is. Only when you sigreturn from the original handler context do you clear the SS_ONSTACK flag so that a new handler frame will start over at the base of the alternate signal stack. The undesireable effect of the Linux behavior is that an overflow of the alternate signal stack can not only go undetected, but lead to a ring buffer effect of clobbering the original handler frame at the base of the signal stack for each successive signal that comes just after the overflow. This is what Shi Weihua's test case demonstrates. Normally this does not come up because of the signal mask, but the test case uses SA_NODEFER for its SIGSEGV handler. The other subtle part of the existing Linux semantics is that a simple longjmp out of a signal handler serves to take you off the signal stack in a safe and reliable fashion without having used sigreturn (nor having just returned from the handler normally, which means the same). After the longjmp (or even informal stack switching not via any proper libc or kernel interface), the alternate signal stack stands ready to be used again. A paranoid program would allocate a PROT_NONE red zone around its alternate signal stack. Then a small overflow would trigger a SIGSEGV in handler setup, and be fatal (core dump) whether or not SIGSEGV is blocked. As with thread stack red zones, that cannot catch all overflows (or underflows). e.g., a local array as large as page size allocated in a function called from a handler, but not actually touched before more calls push more stack, could cause an overflow that silently pushes into some unrelated allocated pages. The BSD behavior does not do anything in particular about overflow. But it does at least avoid the wraparound or "ring buffer effect", so you'll just get a straightforward all-out overflow down your address space past the low end of the alternate signal stack. I don't know what the BSD behavior is for longjmp out of an SA_ONSTACK handler. The POSIX wording relating to sigaltstack is pretty minimal. I don't think it speaks to this issue one way or another. (The program that overflows its stack is clearly in undefined behavior territory of one sort or another anyhow.) Given the longjmp issue and the potential for highly subtle complications in existing programs relying on this in arcane ways deep in their code, I am very dubious about changing the behavior to the BSD style persistent flag. I think Shi Weihua's patches have a similar effect by tracking the SP used in the last handler setup. I think it would be sensible for the signal handler setup code to detect when it would itself be causing a stack overflow. Maybe something like the following patch (untested). This issue exists in the same way on all machines, so ideally they would all do a similar check. When it's the handler function itself or its callees that cause the overflow, rather than the signal handler frame setup alone crossing the boundary, this still won't help. But I don't see any way to distinguish that from the valid longjmp case. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add DMI quirk for io-delay hangs on Compaq Presario V6000 laptopsIngo Molnar
add the DMI strings provided by Islam Amer <pharon@gmail.com>, for the Compaq Presario V6000 (Quanta/30B7). Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: make io_delay=0xed the defaultIngo Molnar
make io_delay=0xed the default. This frees up port 0x80 which is a debug port on some machines and locks up certain laptops. Testing only for now. Try the io_delay=0x80 boot option if this does not work for you. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: various changes and cleanups to in_p/out_p delay detailsIngo Molnar
various changes to the in_p/out_p delay details: - add the io_delay=none method - make each method selectable from the kernel config - simplify the delay code a bit by getting rid of an indirect function call - add the /proc/sys/kernel/io_delay_type sysctl - change 'io_delay=standard|alternate' to io_delay=0x80 and io_delay=0xed - make the io delay config not depend on CONFIG_DEBUG_KERNEL Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: "David P. Reed" <dpreed@reed.com>
2008-01-30x86: provide a DMI based port 0x80 I/O delay override.Rene Herman
x86: provide a DMI based port 0x80 I/O delay override. Certain (HP) laptops experience trouble from our port 0x80 I/O delay writes. This patch provides for a DMI based switch to the "alternate diagnostic port" 0xed (as used by some BIOSes as well) for these. David P. Reed confirmed that port 0xed works for him and provides a proper delay. The symptoms of _not_ working are a hanging machine, with "hwclock" use being a direct trigger. Earlier versions of this attempted to simply use udelay(2), with the 2 being a value tested to be a nicely conservative upper-bound with help from many on the linux-kernel mailinglist but that approach has two problems. First, pre-loops_per_jiffy calibration (which is post PIT init while some implementations of the PIT are actually one of the historically problematic devices that need the delay) udelay() isn't particularly well-defined. We could initialise loops_per_jiffy conservatively (and based on CPU family so as to not unduly delay old machines) which would sort of work, but... Second, delaying isn't the only effect that a write to port 0x80 has. It's also a PCI posting barrier which some devices may be explicitly or implicitly relying on. Alan Cox did a survey and found evidence that additionally some drivers may be racy on SMP without the bus locking outb. Switching to an inb() makes the timing too unpredictable and as such, this DMI based switch should be the safest approach for now. Any more invasive changes should get more rigid testing first. It's moreover only very few machines with the problem and a DMI based hack seems to fit that situation. This also introduces a command-line parameter "io_delay" to override the DMI based choice again: io_delay=<standard|alternate> where "standard" means using the standard port 0x80 and "alternate" port 0xed. This retains the udelay method as a config (CONFIG_UDELAY_IO_DELAY) and command-line ("io_delay=udelay") choice for testing purposes as well. This does not change the io_delay() in the boot code which is using the same port 0x80 I/O delay but those do not appear to be a problem as David P. Reed reported the problem was already gone after using the udelay version. He moreover reported that booting with "acpi=off" also fixed things and seeing as how ACPI isn't touched until after this DMI based I/O port switch I believe it's safe to leave the ones in the boot code be. The DMI strings from David's HP Pavilion dv9000z are in there already and we need to get/verify the DMI info from other machines with the problem, notably the HP Pavilion dv6000z. This patch is partly based on earlier patches from Pavel Machek and David P. Reed. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix: s2ram + P4 + tsc = annoyanceMike Galbraith
s2ram recently became useful here, except for the kernel's annoying habit of disabling my P4's perfectly good TSC. [ 107.894470] CPU 1 is now offline [ 107.894474] SMP alternatives: switching to UP code [ 107.895832] CPU0 attaching sched-domain: [ 107.895836] domain 0: span 1 [ 107.895838] groups: 1 [ 107.896097] CPU1 is down [ 3.726156] Intel machine check architecture supported. [ 3.726165] Intel machine check reporting enabled on CPU#0. [ 3.726167] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available [ 3.726170] CPU0: Thermal monitoring enabled [ 3.726175] Back to C! [ 3.726708] Force enabled HPET at resume [ 3.726775] Enabling non-boot CPUs ... [ 3.727049] CPU0 attaching NULL sched-domain. [ 3.727165] SMP alternatives: switching to SMP code [ 3.727858] Booting processor 1/1 eip 3000 [ 3.727862] CPU 1 irqstacks, hard=b042f000 soft=b042d000 [ 3.738173] Initializing CPU#1 [ 3.798912] Calibrating delay using timer specific routine.. 5986.12 BogoMIPS (lpj=2993061) [ 3.798920] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000 [ 3.798931] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 3.798934] CPU: L2 cache: 512K [ 3.798936] CPU: Physical Processor ID: 0 [ 3.798938] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000 [ 3.798946] Intel machine check architecture supported. [ 3.798952] Intel machine check reporting enabled on CPU#1. [ 3.798955] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available [ 3.798959] CPU1: Thermal monitoring enabled [ 3.799161] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 [ 3.799187] checking TSC synchronization [CPU#0 -> CPU#1]: [ 3.819181] Measured 63588552840 cycles TSC warp between CPUs, turning off TSC clock. [ 3.819184] Marking TSC unstable due to: check_tsc_sync_source failed. If check_tsc_warp() is called after initial boot, and the TSC has in the meantime been set (BIOS, user, silicon, elves) to a value lower than the last stored/stale value, we blame the TSC. Reset to pristine condition after every test. Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 22:15:38 +0000