aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-07-14iwlwifi: Fix LEDs for 3945Abhijeet Kolekar
The patch fixes LEDs problem for 3945. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14iwlwifi: send TXPOWER command after a new RXON commandZhu Yi
The patch fixes the problem that TXPOWER command is not sent after we issue a new RXON command which requires a tune. Otherwise we won't be able to Tx any frames. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14iwlwifi: enable active scanningTomas Winkler
This patch enables active scan on active channels. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14iwlwifi: unify 4965 and 5000 scanning codeTomas Winkler
This patch unifies 4965 and 5000 scanning code. We increases the version number to 1.3.27. Since new uCode iwlwifi-4965-2.ucode is required for 4965 cards. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14iwlwifi: LED use correctly blink tableTomas Winkler
This patch makes correct usage of the LED blink table. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14iwlwifi: fix LED stallTomas Winkler
This patch fixes LED stall. last_blink_time was updated only if LED command was sent, causing wrong computation of the througput. Some code cleanup comes with this patch as well Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14iwlwifi: differentiate 4965 and 5000 hw ampdu queues numberTomas Winkler
This patch asks to allocate the correct amount of sw queues according to hw ampdu queues number. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14iwlwifi: make iwl4965_mac_conf_tx in atomic contextEmmanuel Grumbach
This patch fixes iwl4965_mac_conf_tx. A mutex was taken in atomic context leading to Oops. This patch removes the mutex and extends the hold priv->lock. None of the field of QOS is accessed without priv->lock held. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14iwlwifi: rs always set lq_sta->privTomas Winkler
This patch fixes printk NULL pointer exceptions in rs code. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14iwlwifi: remove post associate workTomas Winkler
This patch removes post associate work. It wasn't used. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14iwlwifi: fixes RTS / CTS supportEmmanuel Grumbach
This patch fixes the RTS / CTS support in iwlwifi. 5000 will send CTS to self when allowed by spec, 4965 will send RTS or CTS to self according to mac80211 request. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14iwlwifi: adding pci device ids to iwl_hw_card_idsEsti Kummer
The patch adds PCI device IDs to iwl_hw_card_ids. Signed-off-by: Esti Kummer <stkumer@localhost.localdomain> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14iwl3965: remove useless network and duplicate checkingAdel Gadllah
mac802 can handle duplicate packages on its own, so let it do it. The patch is based on patch from Johannes Berg for iwl4965. Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: dont add a STA which is not in the same IBSSEmmanuel Grumbach
This patch avoids adding STAs that don't belong to our IBSS ieee80211_bssid_match matches also bcast address so also APs were added Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14iwlwif: remove compilation warnings iwl_add_radiotapTomas Winkler
Use directly put_unaligned_leX instead of put_unaligned(cpu_to_leX Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211 hwsim: fix endianness bugJohannes Berg
Radiotap is entirely little endian. Found with sparse. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: fix struct ieee80211_tx_queue_paramsJohannes Berg
Multiple issues: - there are no "default" values needed - cw_min/cw_max can be larger than documented - restructure to decrease size - use get_unaligned_le16 Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: fix TX sequence numbersJohannes Berg
This patch makes mac80211 assign proper sequence numbers to QoS-data frames. It also removes the old sequence number code because we noticed that only the driver or hardware can assign sequence numbers to non-QoS-data and especially management frames in a race-free manner because beacons aren't passed through mac80211's TX path. This patch also adds temporary code to the rt2x00 drivers to not break them completely, that code will have to be reworked for proper sequence numbers on beacons. It also moves sequence number assignment down in the TX path so no sequence numbers are assigned to frames that are dropped. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14wext: make sysfs bits optional and deprecate themJohannes Berg
The /sys/class/net/*/wireless/ direcory is, as far as I know, not used by anyone. Additionally, the same data is available via wext ioctls. Hence the sysfs files are pretty much useless. This patch makes them optional and schedules them for removal. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: fix RX sequence number checkJohannes Berg
According to 802.11-2007, we are doing the wrong thing in the sequence number checks when receiving frames. This fixes it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: Fix ieee80211_rx_reorder_ampdu: ignore QoS null packetsEmmanuel Grumbach
This patch fixes the check at the entrance to ieee80211_rx_reorder_ampdu. This check has been broken by 'mac80211: rx.c use new helpers'. Letting QoS NULL packet in ieee80211_rx_reorder_ampdu led to packet loss in RX. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14rtl8187: use different ANAPARAM*_OFF values for 8187BHerton Ronaldo Krzesinski
For RTL8187B it seems we need special values too for ANAPARAM*_OFF values (and not use RTL8187 ones). The ANAPARAM*_OFF values used are the stock ones read from the hardware after a cold boot. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14ssb: Include dma-mapping.hMichael Buesch
ssb.h implements DMA mapping functions, so it should include dma-mapping.h. This fixes compile failures on certain architectures. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14rt2x00: Reorganize beacon handlingIvo van Doorn
With the new beacon handling from mac80211 we can reorganize the beacon handling in rt2x00 as well. This patch will move the function to the TX handlers, and move all duplicate code into rt2x00queue.c. After this change the descriptor helper functions from rt2x00queue.c no longer need to be exported outside of rt2x00lib and can be declared static. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14rt2x00: Add support for CTS protection in rt2x00libIvo van Doorn
Inform drivers about the changed CTS protection settings. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: revamp beacon configurationJohannes Berg
This patch changes mac80211's beacon configuration handling to never pass skbs to the driver directly but rather always require the driver to use ieee80211_beacon_get(). Additionally, it introduces "change flags" on the config_interface() call to enable drivers to figure out what is changing. Finally, it removes the beacon_update() driver callback in favour of having IBSS beacon delivered by ieee80211_beacon_get() as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: push interface checks downJohannes Berg
This patch pushes the "netif_running()" and "same type as before" checks down into ieee80211_if_change_type() to centralise the logic instead of duplicating it for cfg80211 and wext. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: revamp virtual interface handlingJohannes Berg
This patch revamps the virtual interface handling and makes the code much easier to follow. Fewer functions, better names, less spaghetti code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: make master netdev handling saneJohannes Berg
Currently, almost every interface type has a 'bss' pointer pointing to BSS information. This BSS information, however, is for a _local_ BSS, not for the BSS we joined, so having it on a STA mode interface makes little sense, but now they have it pointing to the master device, which is an AP mode virtual interface. However, except for some bitrate control data, this pointer is only used in AP/VLAN modes (for power saving stations.) Overall, it is not necessary to even have the master netdev be a valid virtual interface, and it doesn't have to be on the list of interfaces either. This patch changes the master netdev to be special, it now - no longer is on the list of virtual interfaces, which lets me remove a lot of tests for that - no longer has sub_if_data attached, since that isn't used Additionally, this patch changes some vlan/ap mode handling that is related to these 'bss' pointers described above (but in the VLAN case they actually make sense because there they point to the AP they belong to); it also adds some debugging code to IEEE80211_DEV_TO_SUB_IF to validate it is not called on the master netdev any more. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14rtl8187: Fixed section mismatch in rtl8187_dev.cIhar Hrachyshka
When CONFIG_HOTPLUG=n the following error occures on vmlinux linkage: `.exit.text' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o 'rtl8187_disconnect' function marked as __devexit isn't compiled with no hotplug support. Added __devexit_p macros to fix the problem. Signed-off-by: Ihar Hrachyshka <ihar.hrachyshka@promwad.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14rt2x00: Fix NULL pointer error in adhoc/master modeIvo van Doorn
As soon as an interface is enabled, and that interface is in adhoc or master mode, the device will start raising beacondone interrupts. But before the first interrupt is raised, mac80211 will probably not have send any beacons to the device yet, which results in a NULL pointer error when the skb is being freed. Note that the "raise beacondone interrupts without a beacon" is also a bug, and will be addressed later. The more important bug however is preventing the NULL pointer failt itself, since there might be other conditions that could trigger it as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: power management wext hooksSamuel Ortiz
This patch implements the power management routines wireless extensions for mac80211. For now we only support switching PS mode between on and off. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08netdev: Move atomic queue state bits into netdev_queue.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08net: Delete NETDEVICES_MULTIQUEUE kconfig option.David S. Miller
Multiple TX queue support is a core networking feature. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move _xmit_lock and xmit_lock_owner into netdev_queue.David S. Miller
Accesses are mostly structured such that when there are multiple TX queues the code transformations will be a little bit simpler. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Make qdisc_run take a netdev_queue.David S. Miller
This allows us to use this calling convention all the way down into qdisc_restart(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Make netif_schedule() routines work with netdev_queue objects.David S. Miller
Only plain netif_schedule() remains taking a net_device, mostly as a compatability item while we transition the rest of these interfaces. Everything else calls netif_schedule_queue() or __netif_schedule(), both of which take a netdev_queue pointer. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move gso_skb into netdev_queue.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08mac80211: Decrease number of explicit ->tx_queue references.David S. Miller
Accomplish this by using local variables. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Add qdisc_tx_is_noop() helper and use in IPV6.David S. Miller
This indicates if the NOOP scheduler is what is active for TX on a given device. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08net: Clean up explicit ->tx_queue references in link watch.David S. Miller
First, we add a qdisc_tx_changing() helper which returns true if the qdisc attachment is in transition. Second, we remove an assertion warning which is of limited value and is hard to express precisely in a multiqueue environment. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Add qdisc_all_tx_empty()David S. Miller
This is a helper function, currently used by IRDA. This is being added so that we can contain and isolate as many explicit ->tx_queue references in the tree as possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Add qdisc_reset_all_tx().David S. Miller
Isolate callers that want to simply reset all the TX qdiscs from the details of TX queues. Use this in the ISDN code. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move next_sched into struct netdev_queue.David S. Miller
We schedule queues, not the device, for output queue processing in BH. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Make netem queue agnostic.David S. Miller
It just wants the root qdisc given an arbitrary qdisc, and that is simply qdisc->dev_queue->qdisc Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Stephen Hemminger <shemminger@vyatta.com>
2008-07-08pkt_sched: Kill stats_lock member of struct Qdisc.David S. Miller
It is always equal to qdisc->dev_queue->lock Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Kill qdisc_ingress, use netdev->rx_queue.qdisc instead.David S. Miller
Now that our qdisc management is bi-directional, per-queue, and fully orthogonal, there is no reason to have a special ingress qdisc pointer in struct net_device. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move rest of qdisc state into struct netdev_queueDavid S. Miller
Now qdisc, qdisc_sleeping, and qdisc_list also live there. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: The ingress_lock member is no longer needed.David S. Miller
Every qdisc is assosciated with a queue, and in the case of ingress qdiscs that will now be netdev->rx_queue so using that queue's lock is the thing to do. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move queue_lock into struct netdev_queue.David S. Miller
The lock is now an attribute of the device queue. One thing to notice is that "suspicious" places emerge which will need specific training about multiple queue handling. They are so marked with explicit "netdev->rx_queue" and "netdev->tx_queue" references. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 10:16:47 +0000