aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-10-09IB/mthca: Use PCI-X/PCI-Express read control interfacesPeter Oruba
These driver changes incorporate the proposed PCI-X / PCI-Express read byte count interface. Reading and setting those values doesn't take place "manually", instead wrapping functions are called to allow quirks for some PCI bridges. Signed-off by: Peter Oruba <peter.oruba@amd.com> Based on work by Stephen Hemminger <shemminger@linux-foundation.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/sa: Error handling thinko fixAli Ayoub
ib_create_send_mad() returns an error code pointer on error, not NULL. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ehca: Export module parameters in sysfsAnton Blanchard
At the moment the ehca module parameters are not exported in sysfs. Export them with 0444 permissions. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ehca: Make output clearer by removing some debug messagesAnton Blanchard
ehca spits out a lot of debugging information. I had to look closely to see the "Port 1 is not active" message within all the debug: eHCA Infiniband Device Driver (Rel.: SVNEHCA_0022) eHCA scaling code enabled ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_define_sqp Port 1 is not active. ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_create_qp ehca_define_sqp() failed rc=ffffffffffffffff ib_mad: Couldn't create ib_mad QP1 ib_mad: Couldn't open ehca0 port 1 ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr unsupported fmr_attr->page_shift=9 ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr rc=ffffffffffffffea pd=c000000b4b5b2420 mr_access_flags=7 fmr_attr=c0000005afd37394 fmr_create failed for FMR 0 Remove a few debug statements so that things are clearer: eHCA Infiniband Device Driver (Rel.: SVNEHCA_0022) eHCA scaling code enabled ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_define_sqp Port 1 is not active. ib_mad: Couldn't create ib_mad QP1 ib_mad: Couldn't open ehca0 port 1 ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr unsupported fmr_attr->page_shift=9 fmr_create failed for FMR 0 Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/mlx4: Fix up SRQ limit_watermark endiannessRoland Dreier
mlx4_srq_query() returns a big-endian 16-bit value through an int *, which screws up sparse checking. Fix this so that a CPU-endian value is returned. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IPoIB: Fix error path memory leakEli Cohen
Clean up properly if ib_query_pkey() or ib_query_gid() fail. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IPoIB: Fix typo to end statement with ';' instead of ','Eli Cohen
Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/mthca: Enable MSI-X by defaultMichael S. Tsirkin
Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Enable MSI-X by defaultMichael S. Tsirkin
Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/fmr_pool: Clean up some error messages in fmr_pool.cAnton Blanchard
A number of printks in fmr_pool.c dont have newlines, eg: fmr_create failed for FMR 0<5>FS-Cache: Loaded Fix them up. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ehca: Include <linux/mutex.h> from ehca_classes.hRoland Dreier
ehca_classes.h uses struct mutex, so while <linux/mutex.h> seems to be pulled in indirectly by one of the headers it includes, the right thing is to include <linux/mutex.h> directly. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Acked-by: Stefan Roscher <stefan.roscher@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/mlx4: Use __set_data_seg() in mlx4_ib_post_recv()Roland Dreier
Use a __set_data_seg() helper in mlx4_ib_post_recv() too; in addition to making the code easier to read, this also allows gcc to generate better code -- on x86_64: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-8 (-8) function old new delta mlx4_ib_post_recv 359 351 -8 Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Don't free special QPs in QP number bitmapRoland Dreier
Special QPs are not allocated using the regular QP number bitmap, so when they are destroyed, their QP number should not be freed in the bitmap. Found by Dotan Barak of Mellanox. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Use enum value GO_BIT_TIMEOUT_MSECSDotan Barak
Rename GO_BIT_TIMEOUT to GO_BIT_TIMEOUT_MSECS for clarity, and actually use it as the go bit timeout (instead of having the define but then ignoring it and using a hard-coded 10 * HZ for the actual timeout). Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB: find_first_zero_bit() takes unsigned pointerRoland Dreier
Fix sparse warning drivers/infiniband/core/device.c:142:6: warning: incorrect type in argument 1 (different signedness) drivers/infiniband/core/device.c:142:6: expected unsigned long const *addr drivers/infiniband/core/device.c:142:6: got long *[assigned] inuse by making the local variable inuse unsigned. Does not affect generated code at all. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IPoIB: Make sure no receives are handled when stopping deviceRoland Dreier
The current IPoIB code might process receive completions from ipoib_drain_cq() when bringing down the interface. This could cause packets to be passed up the stack without the device's poll method being called. Avoid this by setting the status of any successful completions to IB_WC_WR_FLUSH_ERR. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09RDMA/cxgb3: Make the iw_cxgb3 module parameters writableSteve Wise
Allow changing parameter values without having to reload the module. This is safe because these parameters are only looked at when a new connection is established. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09Linux 2.6.23Linus Torvalds
2007-10-09Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Au1000: set the PCI controller IO base [MIPS] Alchemy: Fix USB initialization. [MIPS] IP32: Fix fatal typo in address computation.
2007-10-09NLM: Fix a memory leak in nlmsvc_testlockTrond Myklebust
The recent fix for a circular lock dependency unfortunately introduced a potential memory leak in the event where the call to nlmsvc_lookup_host fails for some reason. Thanks to Roel Kluin for spotting this. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-09sata_mv: correct S/G table limitsJeff Garzik
The recent mv_fill_sg() rewrite, to fix a data corruption problem related to IOMMU virtual merging, forgot to account for the potentially-increased size of the scatter/gather table after its run. Additionally, the DMA boundary is reduced from 0xffffffff to 0xffff to more closely match the needs of mv_fill_sg(). Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-09[MIPS] Au1000: set the PCI controller IO baseFlorian Fainelli
The PCI controller IO base was not set in the au1000 pci code. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-09[MIPS] Alchemy: Fix USB initialization.Florian Fainelli
This patch fixes a wrong ifdef in the board setup code, leading to the GPIO pin not being pulled high, and thus the USB switch not being powered at all. This finishes the rename of CONFIG_USB_OHCI to CONFIG_USB_OHCI_HCD, which started in 2005 (before 2.6.12-rc2), then probably because things were working anyway for most people got forgotten. [Ralf: Paolo's original patch didn't fix the module case, Florian's patch only fixed MTX1 etc. so this is a combined patch plus some cleanups.] Cc: Giuseppe Patanè <giuseppe.patane@tvblob.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-09[MIPS] IP32: Fix fatal typo in address computation.Giuseppe Sacco
Signed-off-by: Giuseppe Sacco <eppesuig@debian.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-08Correct Makefile rule for generating custom keymapMaarten Bressers
When building a custom keymap, after setting GENERATE_KEYMAP := 1 in drivers/char/Makefile, the kernel build fails like this: CC drivers/char/vt.o make[2]: *** No rule to make target `drivers/char/%.map', needed by `drivers/char/defkeymap.c'. Stop. make[1]: *** [drivers/char] Error 2 make: *** [drivers] Error 2 This was caused by commit af8b128719f5248e542036ea994610a29d0642a6, which deleted a necessary colon from the Makefile rule that generates the keymap, since that rule contains both a target and a target-pattern. The following patch puts the colon back: Signed-off-by: Maarten Bressers <mbres@gentoo.org> Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-08ISDN: Fix data access out of array boundsKarsten Keil
Fix against access random data bytes outside the dev->chanmap array. Thanks to Oliver Neukum for pointing me to this issue. Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-08Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPv6]: Fix ICMPv6 redirect handling with target multicast address [PKT_SCHED] cls_u32: error code isn't been propogated properly [ROSE]: Fix rose.ko oops on unload [TCP]: Fix fastpath_cnt_hint when GSO skb is partially ACKed
2007-10-08AIO: fix cleanup in io_submit_one(...)Yan Zheng
When IOCB_FLAG_RESFD flag is set and iocb->aio_resfd is incorrect, statement 'goto out_put_req' is executed. At label 'out_put_req', aio_put_req(..) is called, which requires 'req->ki_filp' set. Signed-off-by: Yan Zheng<yanzheng@21cn.com> Cc: Zach Brown <zach.brown@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-08fix page release issue in filemap_faultYan Zheng
find_lock_page increases page's usage count, we should decrease it before return VM_FAULT_SIGBUS Signed-off-by: Yan Zheng<yanzheng@21cn.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-08fix VM_CAN_NONLINEAR check in sys_remap_file_pagesYan Zheng
The test for VM_CAN_NONLINEAR always fails Signed-off-by: Yan Zheng<yanzheng@21cn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-08mm: set_page_dirty_balance() vs ->page_mkwrite()Peter Zijlstra
All the current page_mkwrite() implementations also set the page dirty. Which results in the set_page_dirty_balance() call to _not_ call balance, because the page is already found dirty. This allows us to dirty a _lot_ of pages without ever hitting balance_dirty_pages(). Not good (tm). Force a balance call if ->page_mkwrite() was successful. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-08[IPv6]: Fix ICMPv6 redirect handling with target multicast addressBrian Haley
When the ICMPv6 Target address is multicast, Linux processes the redirect instead of dropping it. The problem is in this code in ndisc_redirect_rcv(): if (ipv6_addr_equal(dest, target)) { on_link = 1; } else if (!(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) { ND_PRINTK2(KERN_WARNING "ICMPv6 Redirect: target address is not link-local.\n"); return; } This second check will succeed if the Target address is, for example, FF02::1 because it has link-local scope. Instead, it should be checking if it's a unicast link-local address, as stated in RFC 2461/4861 Section 8.1: - The ICMP Target Address is either a link-local address (when redirected to a router) or the same as the ICMP Destination Address (when redirected to the on-link destination). I know this doesn't explicitly say unicast link-local address, but it's implied. This bug is preventing Linux kernels from achieving IPv6 Logo Phase II certification because of a recent error that was found in the TAHI test suite - Neighbor Disovery suite test 206 (v6LC.2.3.6_G) had the multicast address in the Destination field instead of Target field, so we were passing the test. This won't be the case anymore. The patch below fixes this problem, and also fixes ndisc_send_redirect() to not send an invalid redirect with a multicast address in the Target field. I re-ran the TAHI Neighbor Discovery section to make sure Linux passes all 245 tests now. Signed-off-by: Brian Haley <brian.haley@hp.com> Acked-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-07[PKT_SCHED] cls_u32: error code isn't been propogated properlyStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-07[ROSE]: Fix rose.ko oops on unloadAlexey Dobriyan
Commit a3d384029aa304f8f3f5355d35f0ae274454f7cd aka "[AX.25]: Fix unchecked rose_add_loopback_neigh uses" transformed rose_loopback_neigh var into statically allocated one. However, on unload it will be kfree's which can't work. Steps to reproduce: modprobe rose rmmod rose BUG: unable to handle kernel NULL pointer dereference at virtual address 00000008 printing eip: c014c664 *pde = 00000000 Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC Modules linked in: rose ax25 fan ufs loop usbhid rtc snd_intel8x0 snd_ac97_codec ehci_hcd ac97_bus uhci_hcd thermal usbcore button processor evdev sr_mod cdrom CPU: 0 EIP: 0060:[<c014c664>] Not tainted VLI EFLAGS: 00210086 (2.6.23-rc9 #3) EIP is at kfree+0x48/0xa1 eax: 00000556 ebx: c1734aa0 ecx: f6a5e000 edx: f7082000 esi: 00000000 edi: f9a55d20 ebp: 00200287 esp: f6a5ef28 ds: 007b es: 007b fs: 0000 gs: 0033 ss: 0068 Process rmmod (pid: 1823, ti=f6a5e000 task=f7082000 task.ti=f6a5e000) Stack: f9a55d20 f9a5200c 00000000 00000000 00000000 f6a5e000 f9a5200c f9a55a00 00000000 bf818cf0 f9a51f3f f9a55a00 00000000 c0132c60 65736f72 00000000 f69f9630 f69f9528 c014244a f6a4e900 00200246 f7082000 c01025e6 00000000 Call Trace: [<f9a5200c>] rose_rt_free+0x1d/0x49 [rose] [<f9a5200c>] rose_rt_free+0x1d/0x49 [rose] [<f9a51f3f>] rose_exit+0x4c/0xd5 [rose] [<c0132c60>] sys_delete_module+0x15e/0x186 [<c014244a>] remove_vma+0x40/0x45 [<c01025e6>] sysenter_past_esp+0x8f/0x99 [<c012bacf>] trace_hardirqs_on+0x118/0x13b [<c01025b6>] sysenter_past_esp+0x5f/0x99 ======================= Code: 05 03 1d 80 db 5b c0 8b 03 25 00 40 02 00 3d 00 40 02 00 75 03 8b 5b 0c 8b 73 10 8b 44 24 18 89 44 24 04 9c 5d fa e8 77 df fd ff <8b> 56 08 89 f8 e8 84 f4 fd ff e8 bd 32 06 00 3b 5c 86 60 75 0f EIP: [<c014c664>] kfree+0x48/0xa1 SS:ESP 0068:f6a5ef28 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-07[TCP]: Fix fastpath_cnt_hint when GSO skb is partially ACKedIlpo Järvinen
When only GSO skb was partially ACKed, no hints are reset, therefore fastpath_cnt_hint must be tweaked too or else it can corrupt fackets_out. The corruption to occur, one must have non-trivial ACK/SACK sequence, so this bug is not very often that harmful. There's a fackets_out state reset in TCP because fackets_out is known to be inaccurate and that fixes the issue eventually anyway. In case there was also at least one skb that got fully ACKed, the fastpath_skb_hint is set to NULL which causes a recount for fastpath_cnt_hint (the old value won't be accessed anymore), thus it can safely be decremented without additional checking. Reported by Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-07Driver core: fix SYSF_DEPRECATED breakage for nested classdevsDmitry Torokhov
We should only reparent to a class former class devices that form the base of class hierarchy. Nested devices should still grow from their real parents. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Tested-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: point to migration document
2007-10-07Add manufacturer and card id of teltonica pcmcia modemsAttila Kinali
Add the manufacturer and card id of teltonica pcmcia modems to serial_cs.c Signed-off-by: Attila Kinali <attila@kinali.ch> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07sysrq docs: document sequence that actually worksPavel Machek
Document sequence of keypresses that actually works. Yes, this changed year-or-so ago. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07fix bogus reporting of signals by auditAl Viro
Async signals should not be reported as sent by current in audit log. As it is, we call audit_signal_info() too early in check_kill_permission(). Note that check_kill_permission() has that test already - it needs to know if it should apply current-based permission checks. So the solution is to move the call of audit_signal_info() between those. Bogosity in question is easily reproduced - add a rule watching for e.g. kill(2) from specific process (so that audit_signal_info() would not short-circuit to nothing), say load_policy, watch the bogus OBJ_PID entry in audit logs claiming that write(2) on selinuxfs file issued by load_policy(8) had somehow managed to send a signal to syslogd... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Steve Grubb <sgrubb@redhat.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07Move kasprintf.o to obj-yAlexey Dobriyan
Modulat lguest started giving linking errors MODPOST 1 modules ERROR: "kasprintf" [drivers/lguest/lg.ko] undefined! Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07lockstat: documentationPeter Zijlstra
Provide some documentation for CONFIG_LOCK_STAT. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07Longhaul: add auto enabled "revid_errata" optionRafal Bilski
VIA C3 Ezra-T has RevisionID equal to 1, but it needs RevisionKey to be 0 or CPU will ignore new frequency and will continue to work at old frequency. New "revid_errata" option will force RevisionKey to be set to 0, whatever RevisionID is. Additionaly "Longhaul" will not silently ignore unsuccessful transition. It will try to check if "revid_errata" or "disable_acpi_c3" options need to be enabled for this processor/system. Same for Longhaul ver. 2 support. It will be disabled if none of above options will work. Best case scenario (with patch apllied and v2 enabled): longhaul: VIA C3 'Ezra' [C5C] CPU detected. Longhaul v2 supported. longhaul: Using northbridge support. longhaul: VRM 8.5 longhaul: Max VID=1.350 Min VID=1.050, 13 possible voltage scales longhaul: f: 300000 kHz, index: 0, vid: 1050 mV [...] longhaul: Voltage scaling enabled. Worst case scenario: longhaul: VIA C3 'Ezra-T' [C5M] CPU detected. Powersaver supported. longhaul: Using northbridge support. longhaul: Using ACPI support. longhaul: VRM 8.5 longhaul: Claims to support voltage scaling but min & max are both 1.250. Voltage scaling disabled longhaul: Failed to set requested frequency! longhaul: Enabling "Ignore Revision ID" option. longhaul: Failed to set requested frequency! longhaul: Disabling ACPI C3 support. longhaul: Disabling "Ignore Revision ID" option. longhaul: Failed to set requested frequency! longhaul: Enabling "Ignore Revision ID" option. [akpm@linux-foundation.org: coding-style cleanups] Signed-off-by: Rafal Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07Fix timer_stats printout of events/secAnton Blanchard
When using /proc/timer_stats on ppc64 I noticed the events/sec field wasnt accurate. Sometimes the integer part was incorrect due to rounding (we werent taking the fractional seconds into consideration). The fraction part is also wrong, we need to pad the printf statement and take the bottom three digits of 1000 times the value. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07Don't do load-average calculations at even 5-second intervalsLinus Torvalds
It turns out that there are a few other five-second timers in the kernel, and if the timers get in sync, the load-average can get artificially inflated by events that just happen to coincide. So just offset the load average calculation it by a timer tick. Noticed by Anders Boström, for whom the coincidence started triggering on one of his machines with the JBD jiffies rounding code (JBD is one of the subsystems that also end up using a 5-second timer by default). Tested-by: Anders Boström <anders@bostrom.dyndns.org> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07VT_WAITACTIVE: Avoid returning EINTR when not necessaryLinus Torvalds
We should generally prefer to return ERESTARTNOHAND rather than EINTR, so that processes with unhandled signals that get ignored don't return EINTR. This can help with X startup issues: Fatal server error: xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call although the real fix is having the X server always retry EINTR regardless (since EINTR does happen for signals that have handlers installed). Keithp has a patch for that. Regardless, ERESTARTNOHAND is the correct thing to use. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07firewire: point to migration documentStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-06Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] IP32: Enable PCI bridges
2007-10-06Revert "intel_agp: fix stolen mem range on G33"Kyle McMartin
This reverts commit f443675affe3f16dd428e46f0f7fd3f4d703eeab, which breaks horribly if you aren't running an unreleased xf86-video-intel driver out of git. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Dave Airlie <airlied@linux.ie> Cc: Zhenyu Wang <zhenyu.z.wang@intel.com> Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-06Fix non-terminated PCI match table in PowerMac IDEBenjamin Herrenschmidt
The PCI device table in the powermac IDE driver isn't properly terminated. Depending on how your kernel is linked and other random factors, you can end up with this driver matched against any other PCI device in your system, possibly crashing at boot. Thanks to Heikki for tracking this down with me, the bug have been there for some time, though it rarely hurts due to luck. In this case, the switch from .22 to .23-rc9 is causing it to show up due to differences in the resulting layout of .data I suppose. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <pmac@au1.ibm.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Heikki Lindholm <holindho@cs.helsinki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 22:54:56 +0000