aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-10-12[SCSI] advansys: Remove some custom wrappersMatthew Wilcox
- Replace ASC_ASSERT() with BUG_ON(). In a few places, get rid of the assertion altogether -- the ensuing crash will tell us all we need to know. Use BUG() where it fits better than BUG_ON(). Also fix a fencepost error in advansys_proc_info(). - Replace DvcSleepMilliSecond with mdelay. Despite its name using 'sleep', the implementation was a delay. I've marked some places with XXX where we should probably be using msleep instead. They need to be audited to be sure we can sleep in that context. - Replace DvcDelayMicroSecond with udelay. - Replace DvcDelayNanoSecond with udelay too. All callers were multiples of 1000. - Remove DvcEnterCritical and DvcLeaveCritical. These functions are no-ops, and as the comments said, the spinlock protects the critical sections. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] advansys: Remove a check for an impossible conditionMatthew Wilcox
AscExeScsiQueue() has one caller, and it passes the address of a variable; this cannot ever be NULL. This is the only place that ever sets ASCQ_ERR_SCSIQ_NULL_PTR, so delete that error code too, as well as several other unused ASCQ_ERR codes. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] advansys: Support 16-byte commands properlyMatthew Wilcox
The SCSI midlayer won't send commands greater than ->max_cmd_len. So the checks on length in asc_build_req and adv_build_req are obsolete and can be deleted, but also we have to set the max_cmd_len in advansys_board_found(). Also move the length definitions together, and write a helpful comment. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] advansys: Enable interrupts earlier in queuecommandMatthew Wilcox
Move as much as possible outside the critical section in queuecommand, eg: - Set the scsi_done field before acquiring the lock - Call asc_scsi_done after dropping the lock Also remove a comment suggesting we should enable interrupts (now we do) and do some minor reformatting for readability. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] advansys: Remove `active' queue and all remaining internal queueing codeMatthew Wilcox
The `active' list was used in the reset handler -- but the midlayer guarantees that list is empty by the time the reset handler is invoked. It was also checked in the interrupt routines to be sure that this command belonged to this board, but we don't need to check that either. We can then delete the asc_prt_target_stats() function as it will never print anything, along with asc_enqueue(), asc_dequeue_list(), asc_rmqueue(), asc_scsi_done_list(), struct asc_queue, ASC_QUEUE_EMPTY, ASC_TID_ALL, ASC_FRONT, ASC_BACK, and all the REQ* macros. Also remove this item from the todo list. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] advansys: Remove `done' queueMatthew Wilcox
- Move the guts of asc_scsi_done_list() into a new function, asc_scsi_done. - Call asc_scsi_done() in asc_isr_callback() and adv_isr_callback(). The comment was wrong; scsi_done cannot enable interrupts. - All other places which queued an scp on the done list are error paths for queuecommand, and so we can just call asc_scsi_done() in queuecommand if we receive an error. - We no longer need to keep a list of done requests in advansys_interrupt Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] advansys: Remove a check for an impossible conditionMatthew Wilcox
The midlayer guarantees it won't call ->queuecommand for a host which is handling a reset condition. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] advansys: Remove `waiting' queueMatthew Wilcox
If the adapter is busy, return the request to the midlayer rather than queueing it in the driver. asc_execute_queue() and asc_dequeue() become unused, and we don't need to print out stats on the waiting queue any more. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] advansys: Shrink advansys_board_found a little moreMatthew Wilcox
Move the error reporting into AscInitGetConfig, AdvInitGetConfig and AscInitSetConfig. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] advansys: Reformat microcodeMatthew Wilcox
It's just data, so format it to something that looks more visually appealing (and saves some lines) Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] advansys: Create AdvLoadMicrocodeMatthew Wilcox
Split AdvLoadMicrocode out of AdvInitAsc3550Driver, AdvInitAsc38C0800Driver and AdvInitAsc38C1600Driver. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] advansys: Create AdvBuildCarrierFreelistMatthew Wilcox
Split AdvBuildCarrierFreelist out of AdvInitAsc3550Driver, AdvInitAsc38C0800Driver and AdvInitAsc38C1600Driver. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] advansys: Fix VLB driver nameMatthew Wilcox
You can't have two drivers for the same bus type with the same name. Since ISA and VLB are both isa_drivers, rename the VLB one to advansys_vlb. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] zfcp: whitespace cleanupSwen Schillig
Cleanup the whitepace from the entire zfcp driver to prevent to have those changes in future feature or function patches. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: remove redundant memsetMariusz Kozlowski
alloc_fcdev() calls alloc_netdev() which uses kzalloc to alloc all the memory together with dev->priv region hence no zeroing of structs inside struct mpt_lan_priv needed. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Acked-by: "Moore, Eric Dean" <Eric.Moore@lsil.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: fix two potential mem leaksJesper Juhl
The Coverity checker spotted two potential memory leaks in drivers/message/fusion/mptbase.c::mpt_attach(). There are two returns that may leak the storage allocated for 'ioc' (sizeof(MPT_ADAPTER) bytes). A simple fix would be to simply add two kfree() calls before the return statements, but a better fix (that this patch implements) is to reorder the code so that if we hit the first return condition we don't have to do the allocation at all and then just add a kfree() call for the second case. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: "Moore, Eric Dean" <Eric.Moore@lsil.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: mostly kmalloc + memset conversion to kzallocMariusz Kozlowski
This patch does kmalloc + memset conversion to kzalloc anSigned-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> d simplifies mptctl_probe(). drivers/message/fusion/mptctl.c | 82092 -> 81884 (-208 bytes) drivers/message/fusion/mptctl.o | 201784 -> 200648 (-1136 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Acked-by: "Moore, Eric Dean" <Eric.Moore@lsil.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: Use menuconfig objectsJan Engelhardt
Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Acked-by: "Moore, Eric Dean" <Eric.Moore@lsil.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] srp_transport: convert to use supported_mode attributeFUJITA Tomonori
srp transport works for target drivers without supported_mode attribute but it would be better to use it explicitly. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] fc_transport: add target driver supportFUJITA Tomonori
This adds minimum target driver support like the srp transport does: - fc_remote_port_{rolechg,delete} calls scsi_tgt_it_nexus_{create,destroy} for target drivers. - add callbacks to notify target drivers of the nexus and tmf operation results to fc_function_template. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] add supported_mode and active_mode attributes to the hostFUJITA Tomonori
This adds supported_mode and active_mode attributes to /sys/class/sys_host/hostX/ for specifying the mode that a lld supports and the currently activated mode. The output format is similar to fc rport roles: luce:/sys/class/scsi_host/host0$ cat supported_mode Initiator luce:/sys/class/scsi_host/host0$ cat active_mode Initiator The mode values uses bitmap since we would support dual-mode llds in the future like this: luce:/sys/class/scsi_host/host0$ cat supported_mode Initiator, Target The supported_mode attribute looks at a scsi_host_template and the active_mode attribute looks at a scsi_host. We would add a hook to a scsi_host_template to change the active_mode attribute dynamically. But now there is no hook since no lld supports that feature. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] tgt: fix can_queue bugFUJITA Tomonori
should use host->can_queue instead of host->hostt->can_queue. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] aic94xx: Add new PCI ID for ASC58300Gilbert Wu
Add new HBA PCI ID (0x416) for ASC58300 which has eight port SAS and SATA PCI-X 133MHz low profile host bus adapter with two mini SAS 4x external connectors. Signed-off-by: Gilbert Wu <gilbert_wu@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] aacraid: Add documentation for new Adaptec, SMC and SUN cardsSalyzyn, Mark
Add the SMC LP, SUN EM and Adaptec 5405 cards to the aacraid documentation list of supported products. These cards are picked up with family match, so no associated code changes. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] hptiop: adding new firmware interface and more PCI device IDsHighPoint Linux Team
updated patch based on Jeff Garzik's comments. - check adapter firmware version and use appropriate interface accordingly - add new PCI device IDs and use PCI_VDEVICE macro - update driver version string - remove unused data structures - remove unnecessary typecasts Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] zfcp: Enable debug feature before setting adapter onlineChristof Schmitt
Already register the debug feature before the zfcp adapter is set online. This allows to use the debug feature to investigate the online/offline sequence. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] zfcp: cleanup, separation of ERP, non ERP-version for exchange_ functionsSwen Schillig
cleanup, using ERP request mempool for all ERP versions of the exchange functions (exchange_config (ECD), exchange_port (EPD) ) providing individual versions of the ECD, EPD functions for ERP and other purposes (_sync). Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] scsi_transport_fc: Introduce disable_target_scan flagChristof Schmitt
This change has already been discussed on linux-scsi: http://marc.info/?t=118771096400003 http://marc.info/?t=118760913100005 Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] zfcp: Remove braces for only one statementChristof Schmitt
Remove braces for only one statement Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] zfcp: Remove unnecessary assignmentChristof Schmitt
zfcp_adapter_enqueue initialized adapter->ccw_device twice with the same value. Remove the second assignment, since it is not necessary. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] zfcp: avoid if (whatever) ; constructs.Heiko Carstens
Avoid "if (whatever) ;" constructs since they seem to confuse people, even if there is a comment. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] zfcp: correct indentation for nested if-elseChristof Schmitt
correct indentation for nested if-else Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] kmalloc + memset conversion to kzallocMariusz Kozlowski
In NCR_D700, a4000t, aic7xxx_old, bvme6000, dpt_i2o, gdth, lpfc, megaraid, mvme16x osst, pluto, qla2xxx, zorro7xx Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: Change company name from LSI Logic to LSIPrakash, Sathya
Recently LSI Logic Corp was renamed as LSI Corp, so whereever there is a reference of LSI Logic, it is changed to LSI in mpt fusion driver code. signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Acked-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: Link speed change display supportPrakash, Sathya
When there is state change in FC links, a message is displayed with old and new link speed. signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Acked-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: Creation of mptsas.h header filePrakash, Sathya
The data structure definitions from mptsas.c are moved to a new header file mptsas.h signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Acked-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: Change call back indices to u8 from intPrakash, Sathya
The call back index requires only u8 but in lot of places it is referred as int, now everywhere the call back index variables are declared as u8 with uniform name cb_idx signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Acked-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: Usage of high priority request FIFO to send task ↵Prakash, Sathya
management commands Added support for sending the task management requests through High priority request FIFO instead of Doorbell writes when firmware support High priority FIFO. signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Acked-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: Add support for ATTO 4LD: Rebranded LSI 53C1030Eric Moore
Per request from Matthew Wilcox - using PCI_VENDOR_ATTO. Add support for ATTO UL4D, they are rebranded 53C1030. The changes are 1. Adding a new PCI vendor ID in pci table 2. The spi_port_page_2 is in different format than that of LSI generic spi_port_page_2 and hence mapping code is added. signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] Addition to pci_ids.h for ATTO Technology, Inc.Eric Moore
A new PCI_VENDOR_ID for pci_ids.h. signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] dtc: clean up indent damage and add printk levelsAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] make scsi_decode_sense_buffer and scsi_decode_sense_extras staticAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] NCR5380: fix NCR53C400_PSEUDO_DMA is not definedGabriel C
In file included from drivers/scsi/g_NCR5380_mmio.c:9: drivers/scsi/g_NCR5380.c:559:5: warning: "NCR53C400_PSEUDO_DMA" is not defined Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] scsi_error.c should #include "scsi_transport_api.h"Adrian Bunk
Every file should #include the headers containing the prototypes for its global functions (in this case for scsi_schedule_eh()). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] ips: warning fixAndrew Morton
drivers/scsi/ips.c: In function 'ips_insert_device': drivers/scsi/ips.c:6957: warning: 'index' may be used uninitialized in this function Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] NCR_D700, lpfc: Clean up duplicate includesJesper Juhl
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] aacraid: rename check_resetAndrew Morton
Too generic, clashes with ISDN. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] lpfc: fix potential overflow of hbqs arrayJesper Juhl
The Coverity checker noticed that we may overrun a statically allocated array in drivers/scsi/lpfc/lpfc_sli.c::lpfc_sli_hbqbuf_find(). The case is this; In 'struct lpfc_hba' we have #define LPFC_MAX_HBQS 4 ... struct lpfc_hba { ... struct hbq_s hbqs[LPFC_MAX_HBQS]; ... }; But then in lpfc_sli_hbqbuf_find() we have this code hbqno = tag >> 16; if (hbqno > LPFC_MAX_HBQS) return NULL; if 'hbqno' ends up as exactely 4, then we won't return, and then this list_for_each_entry(d_buf, &phba->hbqs[hbqno].hbq_buffer_list, list) { will cause an overflow of the statically allocated array at index 4, since the valid indices are only 0-3. I propose this patch, that simply changes the 'hbqno > LPFC_MAX_HBQS' into 'hbqno >= LPFC_MAX_HBQS' as a possible fix. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] fc4: convert to use the data buffer accessorsFUJITA Tomonori
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] advansys: Move documentation to Documentation/scsiMatthew Wilcox
The 700+-line comment at the top of the advansys driver fits more comfortably in Documentation/scsi. Delete the sections on: - kernels supported - other files modified (obsolete) - source comments (obsolete) - tests to run - release history (that's what a VCS is for) - contacting connectcom (the domain has expired and the phone number is now in use by another organisation) Known problems/fix list is moved down to the section where jejb put his FIXME. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 12:26:08 +0000