aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-05-05mlx4_core: Support creation of FMRs with pages smaller than 4KOren Duer
Don't hard code a test against a minimum page shift of 12, since the device may support smaller pages. Test against the actual smallest page size from the device capabilities. Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-05IB/ehca: Fix function return typesStefan Roscher
Also remove duplicate assignment of local_ca_ack_delay and change min_t check for local_ca_ack_delay to u8 instead of int. Signed-off-by: Stefan Roscher <stefan.roscher at de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-02RDMA/cxgb3: Bump up the MPA connection setup timeout.Steve Wise
Testing on large clusters shows its way too short at 10 secs. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-02RDMA/cxgb3: Silently ignore close reply after abort.Steve Wise
Remove bad BUG_ON() that can trigger in correct operation from close_con_rpl(). It is possible to get a close_rpl message on a dead connection. The sequence is: - host refs ep for close exchange - host posts close_req - hw posts PEER_ABORT from incoming RST - host marks ep DEAD - host posts ABORT_RPL and releases ep resources - hw posts CLOSE_RPL - host derefs ep and ep freed. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-02RDMA/cxgb3: QP flush fixesSteve Wise
- Flush the QP only after the HW disables the connection. Currently we flush the QP when transitioning to CLOSING. This exposes a race condition where the HW can complete a RECV WR, for instance, -and- the SW can flush that same WR. - Only call CQ event handlers on flush IFF we actually flushed something. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-30IB/ipoib: Fix transmit queue stalling foreverEli Cohen
Commit f56bcd80 ("IPoIB: Use separate CQ for UD send completions") introduced a bug where the transmit queue could get stopped and never woken up. The problem is that send completions are only polled at the end of the xmit function, so if the send queue fills up and the xmit path stops the queue, then there is no way for send completions to ever get polled, and so the transmit queue stays stopped forever. Fix this by arming the send CQ just before posting the last send request that fills the send queue. Then, when the completion event handler is called, drain the send CQ. Since it is possible that not enough send completions are in the CQ, verify that the the net queue has been woken up after draining the send CQ, and if not arm a timer and drain again at the timer function. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-30IB/mlx4: Fix off-by-one errors in calls to mlx4_ib_free_cq_buf()Roland Dreier
When I merged bbf8eed1 ("IB/mlx4: Add support for resizing CQs") I changed things around so that mlx4_ib_alloc_cq_buf() and mlx4_ib_free_cq_buf() were used everywhere they could be. However, I screwed up the number of entries passed into mlx4_ib_alloc_cq_buf() in a couple places -- the function bumps the number of entries internally, so the caller shouldn't add 1 as well. Passing a too-big value for the number of entries to mlx4_ib_free_cq_buf() can cause the cleanup to go off the end of an array and corrupt allocator state in interesting ways. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] linux/libata.h: reorganize ata_device struct members a bit ahci: SB600 ahci can't do MSI, blacklist that capability libata: More TSSTcorp pain, keep in sync with legacy IDE pata_via: Fix 6410 misdetect [libata] pata_atiixp: fix PIO timing data misprogramming
2008-04-29Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (26 commits) [ARM] pxa: fix 1c104e0e4f6ab396960c058e95e18bdedcac945b [ARM] serial: s3c2410: platform_get_irq() may return signed unnoticed [ARM] am79c961a: platform_get_irq() may return signed unnoticed [ARM] Feroceon: Feroceon-specific WA-cache compatible {copy,clear}_user_page() [ARM] Feroceon: fix function alignment in proc-feroceon.S [ARM] Orion: catch a couple more alternative spellings of PCIe [ARM] Orion: fix orion-ehci platform resource end addresses [ARM] Orion: fix ->map_irq() PCIe bus number check [ARM] Orion: fix ioremap() optimization [ARM] feroceon: remove CONFIG_CPU_CACHE_ROUND_ROBIN check [ARM] feroceon: remove CONFIG_CPU_DCACHE_WRITETHROUGH check kprobes/arm: fix decoding of arithmetic immediate instructions kprobes/arm: fix cache flush address for instruction stub [ARM] 5022/1: Race in ARM MMCI PL18x driver, V2 [ARM] 5021/1: at91: buildfix for sam9263 + PM [ARM] 5018/1: RealView: Fix the ARM11MPCore Oprofile compilation [ARM] 5016/1: AT91: typo in mci configuration for at91cap at91sam9263 [ARM] 5017/1: pxa3xx: Report unsupported wakeup sources in pxa3xx_set_wake() [ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info [ARM] 5014/1: Cleanup reset state before entering suspend or resetting. ...
2008-04-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (28 commits) V4L-DVB(7789a): cx18: fix symbol conflict with ivtv driver V4L/DVB (7789): tuner: remove static dependencies on analog tuner sub-modules V4L/DVB (7785): [2.6 patch] make mt9{m001,v022}_controls[] static V4L/DVB (7786): cx18: new driver for the Conexant CX23418 MPEG encoder chip V4L/DVB (7783): drivers/media/dvb/frontends/s5h1420.c: printk fix V4L/DVB (7782): pvrusb2: Driver is no longer experimental V4L/DVB (7781): pvrusb2-dvb: include dvb support by default and update Kconfig help text V4L/DVB (7780): pvrusb2: always enable support for OnAir Creator / HDTV USB2 V4L/DVB (7779): pvrusb2-dvb: quiet down noise in kernel log for feed debug Rename common tuner Kconfig names to use the same Fix V4L/DVB core help messages V4L/DVB (7769): Move other terrestrial tuners to common/tuners V4L/DVB (7768): reorganize some DVB-S Kconfig items V4L/DVB(7767): Move tuners to common/tuners V4L/DVB (7766): saa7134: add another PCI ID for Beholder M6 V4L/DVB (7765): Add support for Beholder BeholdTV H6 V4L/DVB (7763): ivtv: add tuner support for the AverMedia M116 V4L/DVB (7762): ivtv: fix tuner detection for PAL-N/Nc V4L/DVB (7761): ivtv: increase the DMA timeout from 100 to 300 ms V4L/DVB (7759): ivtv: increase version number to 1.2.1 ...
2008-04-29Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Convert most new-style drivers to use module aliasing i2c: Add support for device alias names i2c-amd756-s4882: Fix an error path i2c: Drop unused RTC driver IDs i2c/tps65010: Add missing intialization of client data i2c-sis5595: Minor cleanups in sis5595_access i2c-piix4: Minor cleanups i2c: Spelling fix (successful) i2c-stub: No newline in parameter description
2008-04-29[libata] linux/libata.h: reorganize ata_device struct members a bitJeff Garzik
Put the big stuff at the end, to prepare for upcoming changes (and also hopefully achieve nicer packing of remaining members). Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29ahci: SB600 ahci can't do MSI, blacklist that capabilityTejun Heo
This fixes bz#10507. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Shane Huang <Shane.Huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29V4L-DVB(7789a): cx18: fix symbol conflict with ivtv driverMauro Carvalho Chehab
LD drivers/media/video/built-in.o drivers/media/video/cx18/built-in.o: In function `get_service_set': /home/v4l/tokernel/git/drivers/media/video/cx18/cx18-ioctl.c:118: multiple definition of `get_service_set' drivers/media/video/ivtv/built-in.o:/home/v4l/tokernel/git/drivers/media/video/ivtv/ivtv-ioctl.c:119: first defined here drivers/media/video/cx18/built-in.o: In function `expand_service_set': /home/v4l/tokernel/git/drivers/media/video/cx18/cx18-ioctl.c:92: multiple definition of `expand_service_set' drivers/media/video/ivtv/built-in.o:/home/v4l/tokernel/git/drivers/media/video/ivtv/ivtv-ioctl.c:92: first defined here drivers/media/video/cx18/built-in.o: In function `service2vbi': /home/v4l/tokernel/git/drivers/media/video/cx18/cx18-ioctl.c:44: multiple definition of `service2vbi' drivers/media/video/ivtv/built-in.o:/home/v4l/tokernel/git/drivers/media/video/ivtv/ivtv-ioctl.c:42: first defined here make[2]: ** [drivers/media/video/built-in.o] Erro 1 make[1]: ** [drivers/media/video] Erro 2 make: ** [drivers/media/] Erro 2 Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7789): tuner: remove static dependencies on analog tuner sub-modulesMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7785): [2.6 patch] make mt9{m001,v022}_controls[] staticAdrian Bunk
This patch makes the needlessly global mt9{m001,v022}_controls[] static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7786): cx18: new driver for the Conexant CX23418 MPEG encoder chipHans Verkuil
Many thanks to Steve Toth from Hauppauge and Nattu Dakshinamurthy from Conexant for their support. I am in particular thankful to Hauppauge since without their help this driver would not exist. It should also be noted that Steve did the work to get the DVB part up and running. Thank you! Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: G. Andrew Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7783): drivers/media/dvb/frontends/s5h1420.c: printk fixAndrew Morton
drivers/media/dvb/frontends/s5h1420.c: In function `s5h1420_setsymbolrate': drivers/media/dvb/frontends/s5h1420.c:484: warning: long long unsigned int format, u64 arg (arg 2) We do not know what type the architecture uses for u64. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7782): pvrusb2: Driver is no longer experimentalMike Isely
This driver has been in-kernel and reasonably stable for well over a year. It is in a stable form and is known to work well. Remove its experimental status. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7781): pvrusb2-dvb: include dvb support by default and update ↵Michael Krufky
Kconfig help text Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7780): pvrusb2: always enable support for OnAir Creator / HDTV USB2Michael Krufky
This was a build option in the past, to avoid conflicts with the cxusb module for digital televsion support. Now that dtv mode support has been merged into pvrusb2, the OnAir devices are fully supported by this single module. This no longer should be a build option. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7779): pvrusb2-dvb: quiet down noise in kernel log for feed debugMichael Krufky
Get rid of the noise in dmesg during dvb feed changes, unless the appropriate debug trace flag is enabled. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29Rename common tuner Kconfig names to use the sameMauro Carvalho Chehab
namespace for all of them.
2008-04-29Fix V4L/DVB core help messagesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7769): Move other terrestrial tuners to common/tunersMauro Carvalho Chehab
Those tuners are currently used only under media/dvb. However, they can support also analog TV. Better to move them to the same place as the other hybrid tuners. This would make easier to use those tuners also by analog drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7768): reorganize some DVB-S Kconfig itemsMauro Carvalho Chehab
There are some DVB-S tuners together with DVB-S tags, while others together with tuners. Better to have all of them together. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB(7767): Move tuners to common/tunersMauro Carvalho Chehab
There were several issues in the past, caused by the hybrid tuner design, since now, the same tuner can be used by drivers/media/dvb and drivers/media/video. Kconfig items were rearranged, to split V4L/DVB core from their drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7766): saa7134: add another PCI ID for Beholder M6Igor Kuznetsov
Signed-off-by: Igor Kuznetsov <igk@igk.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7765): Add support for Beholder BeholdTV H6Igor Kuznetsov
Signed-off-by: Igor Kuznetsov <igk@igk.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7763): ivtv: add tuner support for the AverMedia M116Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7762): ivtv: fix tuner detection for PAL-N/NcHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7761): ivtv: increase the DMA timeout from 100 to 300 msHans Verkuil
When there is a lot of DMA traffic this timeout might sometimes be too low. Increase it to be on the safe side. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7759): ivtv: increase version number to 1.2.1Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7758): ivtv: fix oops when itv->speed == 0 and VIDEO_CMD_PLAY is calledHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7757): ivtv: add autodetect for the AVermedia M104 cardHans Verkuil
Note that this card is only detected and not yet working. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7756): ivtv: use strlcpy instead of strcpyHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7755): ivtv: add support for card comments and detected but ↵Hans Verkuil
unsupported cards Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7754): ivtv: change initialization order to fix an oops when device ↵Hans Verkuil
registration failed Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7753): saa7134: fix tuner setupMauro Carvalho Chehab
Tuner setup were happening during i2c attach callback. This means that it would happen on two conditions: 1) if tuner module weren't load, it will happen at request_module("tuner"); 2) if tuner is not compiled as a module, or it is already loaded (for example, on setups with more than one tuner), it will happen when saa7134 registers I2C bus. Due to that, if tuner were loaded, tuner setup will happen _before_ reading the proper values at tuner eeprom. Since set_addr refuses to change for a tuner that were previously defined (except if the tuner_addr is set), this were making eeprom tuner detection useless. This patch removes tuner type setup from saa7134-i2c, moving it to the proper place, after taking eeprom into account. Reviewed-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7752): tuner-core: add a missing \n after a debug printkMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7749): cx88: fix tuner setupMauro Carvalho Chehab
Tuner setup were happening during i2c attach callback. This means that it would happen on two conditions: 1) if tuner module weren't load, it will happen at request_module("tuner"); 2) if tuner is not compiled as a module, or it is already loaded (for example, on setups with more than one tuner), it will happen when cx88 registers I2C bus. Due to that, if tuner were loaded, tuner setup will happen _before_ reading the proper values at tuner eeprom. Since set_addr refuses to change for a tuner that were previously defined (except if the tuner_addr is set), this were making eeprom tuner detection useless. This patch removes tuner type setup from cx88-i2c, moving it to the proper place, after taking eeprom into account. Reviewed-by: Gert Vervoort <gert.vervoort@hccnet.nl> Reviewed-by: Ian Pickworth <ian@pickworth.me.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29libata: More TSSTcorp pain, keep in sync with legacy IDEAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29pata_via: Fix 6410 misdetectAlan Cox
The discrete VIA ATA chips don't have 0x40 enable bits. We check that properly in one location but not another. This causes some users 6410 RAID cards to be incorrectly skipped. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29[libata] pata_atiixp: fix PIO timing data misprogrammingJeff Garzik
Use correct variable, achieve desired result... Spotted by LKML/linux-ide poster whose name I lost (apologies!) Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29i2c: Convert most new-style drivers to use module aliasingJean Delvare
Based on earlier work by Jon Smirl and Jochen Friedrich. Update most new-style i2c drivers to use standard module aliasing instead of the old driver_name/type driver matching scheme. I've left the video drivers apart (except for SoC camera drivers) as they're a bit more diffcult to deal with, they'll have their own patch later. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: Jochen Friedrich <jochen@scram.de>
2008-04-29i2c: Add support for device alias namesJean Delvare
Based on earlier work by Jon Smirl and Jochen Friedrich. This patch allows new-style i2c chip drivers to have alias names using the official kernel aliasing system and MODULE_DEVICE_TABLE(). At this point, the old i2c driver binding scheme (driver_name/type) is still supported. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jochen Friedrich <jochen@scram.de> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org>
2008-04-29i2c-amd756-s4882: Fix an error pathJean Delvare
If initialization fails, we want to restore the physical bus, not delete it again. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-29i2c: Drop unused RTC driver IDsJean Delvare
The x1208, pcf8563 and isl1208 RTC drivers have been converted to new-style i2c drivers, so they no longer use I2C driver IDs. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it>
2008-04-29i2c/tps65010: Add missing intialization of client dataJean Delvare
tps65010_remove() calls i2c_get_clientdata(client) but the client data is never set during initialization, so it gets a NULL pointer at best. I guess it was never spotted because the tps65010 driver is typically not built modular so this function is discarded. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net>
2008-04-29i2c-sis5595: Minor cleanups in sis5595_accessJean Delvare
* Remove commented-out code. * Use dev_warn instead of printk. * Remove a legacy comment. Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 15:37:20 +0000