aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-02-05bonding: fix device name allocation errorJay Vosburgh
The code to select names for the bonding interfaces was, for the non-sysfs creation case, always using a hard-coded set of bond0, bond1, etc, up to max_bonds. This caused conflicts for the second or subsequent loads of the module. Changed the code to obtain device names from dev_alloc_name(). Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05net: use bitrev8Akinobu Mita
Use bitrev8 for bmac, mace, macmace, macsonic, and skfp drivers. [akpm@osdl.org: use the API, not the array] Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mirko Lindner <mlindner@syskonnect.de> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05bonding.h: "extern inline" -> "static inline"Adrian Bunk
"extern inline" generates a warning with -Wmissing-prototypes and I'm currently working on getting the kernel cleaned up for adding this to the CFLAGS since it will help us to avoid a nasty class of runtime errors. If there are places that really need a forced inline, __always_inline would be the correct solution. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05qla3xxx: Add support for Qlogic 4032 chip.Ron Mercer
Qlogic 4032 chip is an incremental change from the 4022. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05remove the broken OAKNET driverAdrian Bunk
The OAKNET driver: - has been marked as BROKEN for more than two years and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05chelsio: more rx speedupStephen Hemminger
Cleanup receive processing some more: * do the reserve padding of skb during setup * don't pass constants to get_packet * do smart prefetch of skb * make copybreak a module parameter Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05chelsio: NAPI speed improvementStephen Hemminger
Speedup and cleanup the receive processing by eliminating the mmio read and a lock round trip. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Add support for the latest 1G/10G Chelsio adapter, T3.Divy Le Ray
This driver is required by the Chelsio T3 RDMA driver posted by Steve Wise. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05make hdlc_setup() static againAdrian Bunk
hdlc_setup was exported, but this export was never used. If a driver using it actually shows up it can still be exported again. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: rx skb recycleAyaz Abdulla
This patch removes the code that recycled the skb on error. This will help in reducing the branches in the main data paths. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: tx lockingAyaz Abdulla
This patch reduces the amount of code within the lock to only the critical sections. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: ring accessAyaz Abdulla
This patch modifys ring access by using pointers. This avoids computing the current index and avoids accessing the base address of the rings. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: dma accessAyaz Abdulla
This patch allows the hardware to fetch the tx and rx ring descriptors with 64 bytes per access instead of 32 bytes. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05remove the broken SKMC driverAdrian Bunk
The SKMC driver has: - already been marked as BROKEN in 2.6.0 three years ago and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05driver for Silan SC92031 netdevCesar Eduardo Barros
This is a driver for the Silan SC92031/Rsltek 8139D NIC chip. This chip is found on at least one counterfeit Encore ENL832-TX-RENT NIC [1], which came with a mini-CD with the 2.4 driver. A slightly older version of the driver was found at [2]. The main difference between them is that the newer one has a small bugfix in the RX path, a lot of gratuitous renaming of functions, all the printable strings changed to show as a "Rsltek 8139D" [sic], and a PCI ID of 8139 instead of 2031. The driver on this patch is a rewrite of the vendor drivers (based mostly on the older one). Changes from the previous patch sent to netdev: - Use MMIO instead of PIO - Changed TX bounce buffers allocation - Use skb_copy_and_csum_dev - Several small bug fixes - Tested for more than just a few minutes each time [1] See http://www.encore-usa.com/faq.php under ENL832-TX-RENT for more information [2] Look for SL_LINUX.ZIP (which is really a .tar.gz) at http://broadbandforum.in/dataone_Intex_LAN_cardlinux-t4207-s15.html [3] To compile on 2.6.17, simply add back the last argument to the interrupt handler in two places, and copy the boolean declarations from 2.6.19 [akpm@osdl.org: build fixes] Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05sky2: better power state managementStephen Hemminger
Improve power management and error handling by using pci_set_power_state(), instead of driver doing PCI PM register changes in the driver. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05remove NETIF_F_TSO ifdeferyArjan van de Ven
Remove the NETIF_F_TSO #ifdef-ery in drivers/net; this was for old-old-2.4 compat (even current 2.4 has NETIF_F_TSO) but it's time to get rid of it by now. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet RX Debugging printoutLinas Vepstas
Add some debugging and error printing. The show_rx_chain() prints out the status of the rx chain, which shows that the status of the descriptors gets messed up after the second & subsequent RX ramfulls. Print out contents of bad packets if error occurs. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet Avoid possible RX chain corruptionLinas Vepstas
Delete possible source of chain corruption; the hardware already knows the location of the tail, and writing it again is likely to mess it up. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet Memory barrierLinas Vepstas
Add memory barrier to make sure that the rest of the RX descriptor state is flushed to memory before we tell the hardware that its ready to go. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet RX Chain tailLinas Vepstas
Tell the hardware the location of the rx ring tail. More punctuation cleanup. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet Remove unused variableLinas Vepstas
Remove unused variable; this makes code easier to read. Tweak commentary. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet RX RefillLinas Vepstas
The invocation of the rx ring refill routine is haphazard, it can be called from a central location. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet Cleanup return codesLinas Vepstas
Simplify the somewhat convoluted use of return codes in the rx buffer handling. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet another skb mem leakLinas Vepstas
Another skb leak in an error branch. Fix this by adding call to dev_kfree_skb_irq() after moving to a more appropriate spot. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet RX skb mem leakLinas Vepstas
One of the unlikely error branches has an skb memory leak. Fix this by handling the error conditions consistently. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet cleanup un-needed APILinas Vepstas
There is no need to pass a flag into spider_net_decode_one_descr() so remove this, and perform some othre minor cleanup. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet remove rxramfull taskletLinas Vepstas
Get rid of the rxramfull tasklet, and let the NAPI poll routine deal with this situation. (The rxramfull interrupt is simply stating that the h/w has run out of room for incoming packets). Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet add net_ratelimit to suppress long outputLinas Vepstas
This patch adds net_ratelimit to many of the printks in order to limit extraneous warning messages (created in response to Bug 28554). This patch supercedes all previous ratelimit patches. This has been tested, please apply. From: James K Lewis <jklewis@us.ibm.com> Signed-off-by: James K Lewis <jklewis@us.ibm.com> Signed-off-by: Linas Vepstas <jlinas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Spidernet DMA coalescingLinas Vepstas
The current driver code performs 512 DMA mappings of a bunch of 32-byte ring descriptor structures. This is silly, as they are all in contiguous memory. This patch changes the code to dma_map_coherent() each rx/tx ring as a whole. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: James K Lewis <jklewis@us.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05chelsio: tabulate the update of the statistic countersFrancois Romieu
Let's try to avoid some code duplication. - cxgb2 The data are contiguous. Use plain memcpy. - ixf1010/pm3393/vsc7326 The cast of &mac->stats to (u64 *) is not wonderful but it is not clear if it is worth to add an ad-hoc union under the struct cmac_statistics. vsc7326_reg.h suggests that more statistics could be available. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-02-05chelsio: misc cleanups in sgeFrancois Romieu
- duplicated code in sge::free_cmdQ_buffers ; - NET_IP_ALIGN is already defined in (included) <linux/skbuff.h> ; - pci_alloc_consistent() returns void * ; - pci_alloc_consistent() returns a zeroed chunk of memory ; - early return in restart_tx_queues. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-02-05chelsio: useless test in cxgb2::remove_oneFrancois Romieu
pci_get_drvadata() is necessarily distinct from NULL if cxgb2::init_one succeeded. cxgb2::remove_one is solely issued through the PCI device callback. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-02-05chelsio: useless curly bracesFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-02-05chelsio: spaces, tabs and friendsFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-02-05chelsio: the return statement is not a functionFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-02-05chelsio: move return, break and continue statements on their own lineFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-02-05[PATCH] ipw2200: add iwconfig rts/frag auto supportZhu Yi
This patch add ipw2200 support for iwconfig rts/frag auto. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: Add ID for ZyXEL ZyAIR G-220 v2Daniel Drake
Tested by Marijn Schouten zd1211b chip 0586:340f v4810 high 00-13-49 AL2230_RF pa0 g--- FCC ID: I88G220V2 Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] softmac: avoid assert in ieee80211softmac_wx_get_rateJohn W. Linville
Unconfigured bcm43xx device can hit an assert() during wx_get_rate queries. This is because bcm43xx calls ieee80211softmac_start late (i.e. during open instead of probe). bcm43xx_net_open -> bcm43xx_init_board -> bcm43xx_select_wireless_core -> ieee80211softmac_start Fix is to check that device is running before completing ieee80211softmac_wx_get_rate. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] prism54: add ethtool -i interfaceKai Engert
Add support for "ethtool -i" to prism54 driver. ethtool -i queries the specified device for associated driver information. This helps tools like Fedora's system-config-network to provide GUI management of network devices. I learned how to write this patch by reading the ipw2100 driver code. Signed-off-by: Kai Engert <kengert@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] bcm43xx: Interrogate hardware-enable switch and update LEDsLarry Finger
The current bcm43xx driver ignores any wireless-enable switches on mini-PCI and mini-PCI-E cards. This patch implements a new routine to interrogate the radio hardware enabled bit in the interface, logs the initial state and any changes in the switch (if debugging enabled), activates the LED to show the state, and changes the periodic work handler to provide 1 second response to switch changes and to account for changes in the periodic work specs. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: Add ID for Linksys WUSBF54GDaniel Drake
Tested by Henrik Hjelte zd1211b chip 13b1:0024 v4802 high 00-14-bf AL2230_RF pa0 ---- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] Update Prism54 MAINTAINERS entryMichael Buesch
prism54-private@prism54.org bounces with SMTP error from remote mailer after RCPT TO:<prism54-private@prism54.org>: host mx1.tuxfamily.net [212.85.158.8]: 550 unknown user developers@islsm.org seems to be the new mailing list. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: Remove addressing abstractionDaniel Drake
Instead of passing our own custom 32-bit addresses around and translating them, this patch makes all our register address constants absolute and removes the translation. There are two ugly parts: - fw_reg_addr() is needed to compute addresses of firmware registers, as this is dynamic based upon firmware - inc_addr() needs a small hack to handle byte vs word addressing However, both of those are only small, and we don't use fw_regs a whole lot anyway. The bonuses here include simplicity and improved driver readability. Also, the fact that registers are now referenced by 16-bit absolute addresses (as opposed to 32-bit pseudo addresses) means that over 2kb compiled code size has been shaved off. Includes some touchups and sparse fixes from Ulrich Kunitz. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: Consistency for address space constantsDaniel Drake
The zd1211rw address space has confused me once too many times. This patch introduces the following naming notation: Memory space is split into segments (cr, fw, eeprom) and segments may contain components (e.g. boot code inside eeprom). These names are arbitrary and only for the description below: x_START: Absolute address of segment start (previously these were named such as CR_BASE_OFFSET, but they weren't really offsets unless you were considering them as an offset to 0) x_LEN: Segment length x_y_LEN: Length of component y of segment x x_y_OFFSET: Relative address of component y into segment x. The absolute address for this component is (x_START + x_y_OFFSET) I also renamed EEPROM registers to EEPROM data. These 'registers' can't be written to using standard I/O and really represent predefined data from the vendor. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: 2 new ZD1211B device ID'sDaniel Drake
Philips SNU5600, tested by unibrow zd1211b chip 0471:1236 v4810 high 00-12-bf AL2230_RF pa0 g-- SMC Ez Connect 802.11g (SMCWUSB-G), tested by Victorino Sanz Prat zd1211b chip 083a:4505 v4810 full 00-13-f7 AL2230_RF pa0 g--N Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: Generic HMAC initializationDaniel Drake
Many of the registers written during ZD1211 HMAC initialization are duplicated exactly for ZD1211B. Move the identical ones into a generic part, and write the hardware-specific ones separately. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05e1000: update version to 7.3.20-k2Auke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2007-02-05e1000: tune our dynamic itr transmit packet accountingJesse Brandeburg
The driver was still mis-calculating the number of bytes sent during transmit, now the driver computes what appears to be exactly 100% correct byte counts (not including CRC) when figuring out how many bytes and frames were sent during the current transmit packet.
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 09:38:00 +0000