aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-03-25[NETFILTER]: nf_conntrack: fix NF_CT_TUPLE_DUMP for IPv4Patrick McHardy
NF_CT_TUPLE_DUMP prints IPv4 addresses as IPv6, fix this and use printk (guarded by #ifdef DEBUG) directly instead of pr_debug since the tuple is usually printed at the end of line and we don't want to include a log-level. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: ipt_CLUSTERIP: fix non-existant macro-namePatrick McHardy
With nf_conntrack DUMP_TUPLE got renamed to NF_CT_DUMP_TUPLE, fix CLUSTERIP to use the proper macro name. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25Merge branch 'net-2.6.26-netns-20080326' of ↵David S. Miller
git://git.linux-ipv6.org/gitroot/yoshfuji/linux-2.6-dev
2008-03-25Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.26
2008-03-25rt2x00: Fix in_atomic() usageIvo van Doorn
rt73usb and rt2500usb used in_atomic to determine if a configuration step should be rescheduled or not. Since in_atomic() is not a valid method to determine if sleeping is allowed we should fix the way this is handled by adding a new flag to rt2x00. In addition mark LED class support for the drivers broken since that also uses the broken in_atomic() method but so far no solution exists to have LED triggers work only in scheduled context. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25rt2x00: Fix rate detection for invalid signalsIvo van Doorn
It has been observed on rt2500pci hardware that some frames received with signal 0x0C do not have the OFDM flag set. Signals can have 2 meanings: 1) The PLCP value 2) The bitrate * 10 For rt2500pci (1) is for frames received with a OFDM rate, and (2) is for frames received with a CCK rate. But 0x0C is a invalid bitrate value but is a valid PLCP value for 54Mbs (obvious OFDM rate). This means that it is possible that the hardware does not set the OFDM bit correctly under all circumstances. This results in rt2x00 failing to detect the rate and mac80211 triggering a WARN_ON() and dropping the frame. To bypass this, print a warning when such a frame is received, and reset the rate to the lowest supported rate for the current band. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25PS3: gelic: Add support for separate cipher selectionMasakazu Mokuno
From version 2.20 of the PS3 system software, the hypervisor allows the guest OSes to specify separate cipher for group and pairwise. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25b43: Don't compile N-PHY code when N-PHY is disabledMichael Buesch
There's no need to compile the N-PHY support code, when the N-PHY support is disabled in Kconfig. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: Completing the parameter packagingAssaf Krauss
This patch completes the changes regarding the packaging of user parameters. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25ipw2200 annotations and fixesAl Viro
a) a bunch of printks in error-handling assums that ->status is big-endian. b) bitfields trouble c) missing annotations NB: a bunch of structs is declared packed for no good reason, AFAICS. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25rt2x00: Add dev_flags to rx descriptorIvo van Doorn
The rxdone_entry_desc structure contains 3 fields which are always 1 or 0. We can safe 8 bytes by replacing them with a single dev_flags fields which contain the flags for those settings. Additionally we can remove the OFDM flag since it is no longer used since the introduction of the SIGNAL_PLCP flag. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: configure default wmm params correctlyVladimir Koutny
Default WMM params have to be set according to beacon/probe response information prior to authentication (or IBSS start/join); beacon queue is configured only in IBSS. This does not affect the use of 'real' WMM params as reported by AP. Signed-off-by: Vladimir Koutny <vlado@ksp.sk> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: prevent tuning during scanningMohamed Abbas
Postpone calling ieee80211_hw_config if hardware scanning is active. This is similar to solution for software scanning where channel setting is delayed until scan complete. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: tear down of block ack sessionsRon Rindjunsky
This patch adds a clean tear down for all block ack sessions if interface goes down or if a deauthentication is done. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: fixing debug prints for AddBA requestRon Rindjunsky
This patch also fixes the Rx timer's comments Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: fixing delba debug printRon Rindjunsky
This patch fixes a wrong debug print when receiving delba Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: filter scan results on unusable channelsJohannes Berg
When you have an AP on channel 13, it will currently often enough be listed in scan results even when the regulatory domain restricts to channels 1-11. This is due to channel overlap. To avoid getting very strange failures, don't show such APs in the scan results. The failure mode will now go from "I can see the AP but not associate" to "I can't see the AP although I know it's there" which is easier to debug. This problem was first really noticed by Jes Sorensen. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Jes Sorensen <jes@trained-monkey.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: use ieee80211_get_channelJohannes Berg
Use the new ieee80211_get_channel() function instead of open-coding it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25wireless: add wiphy channel freq to channel struct lookup helperJohannes Berg
Add ieee80211_get_channel() which gets you a channel struct for a specific wiphy if that channel is present in that wiphy. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: move host command sending functions to core moduleTomas Winkler
1. Host command sending functions moved from iwl4965-base.c to iwl-hcmd.c in iwlcore module 2. enqueue_hcmd function currently stays in iwl4965-base.c. It is invoked through the new 'utils' field in priv's ops. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: rename iwl4965_get_channel_info to iwl_get_channel_infoAssaf Krauss
iwl4965_get_channel_info was moved to iwlcore module 4965 needs to be stripped off Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: iwl3945 remove 4965 commandsTomas Winkler
This patch removes 4965 host commands from iwl-3945-commands.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi-2.6: enables RX TKIP decryption in HWEmmanuel Grumbach
This patch enables RX TKIP decryption in HW. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi-2.6: enables HW TKIP encryptionEmmanuel Grumbach
This patch add support for TKIP encryption (TX) in HW. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: allows driver to request a Phase 1 RX keyEmmanuel Grumbach
This patch makes mac80211 able to send a phase1 key for TKIP decryption. This is needed for drivers that don't do the rekeying by themselves (i.e. iwlwifi). Upon IV16 wrap around, the packet is decrypted in SW, if decryption is ok, mac80211 calls to update_tkip_key with a new phase 1 RX key. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: get a TKIP phase key from skbEmmanuel Grumbach
This patch makes mac80211 able to compute a TKIP key from an skb. The requested key can be a phase 1 or a phase 2 key. This is useful for drivers who need to provide tkip key to their HW to enable HW encryption. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi-2.6: RX status translation to old schemeEmmanuel Grumbach
This patch adds translation for the RX status of an incoming packet. The incoming status has to be translated to the old scheme in order to know if the decryption has been done, MIC failure has occured, TTAK is valid etc... This translation is mandatory for all RX packets when using 5300 and for all HT packets using 4965. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi-2.6: Cleans up set_key flowEmmanuel Grumbach
This patch cleans up the set_key flow. Rxon with hw encryption bit set is not sent upon each call to set_key. Separation is made between global key (WEP) and dynamic key (TKIP + CCMP and WEP in some cases). Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: Probe Flow - Extracting hw and priv initAssaf Krauss
1. Extracting hw and priv initialization from probe function. 2. Moving some initialization functions to core module. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: Probe Flow - Performing allocation in a separate functionAssaf Krauss
Performing allocation in a separate function (previously handled in 'probe') Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: Packing all 4965 parametersAssaf Krauss
This patch defines a package struct for iwlwifi parameters, and uses a single instance of this struct to group all iwl4965 module parameters together. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: Re-ordering probe flow (4965)Assaf Krauss
This patch re-orders the iwl4965_pci_probe function. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: remove macros containing offsets from eeprom structReinette Chatre
A user needing to access these fields can use offsetof() for access. The comments still contain the offset to assist with debugging. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: store rssi as an u32Holger Schurig
Don't store an (hardware base) u8 value in bss_descriptor, but just an unsigned int (RSSI is really unsigned). Compilers generate more efficent code for ints than for bytes. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: remove lots of unused stuffHolger Schurig
This removes many unused function parameters as well as some not-implemented functions, e.g. CMD_802_11_GET_STATS. The silly lbs_set_cmd_ctrl_node() function is now also gone. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: misc power saving adjustsHolger Schurig
* firmware for the CF card supports power saving * the driver currenly only accept "iwconfig ethX power on|off", so I fixed what the range wext ioctl reports. * initialize value/flags in lbs_get_power() * get rid of unused parameter psmode in lbs_ps_confirm_sleep() * some minor debug output tweaks Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: convert GET_LOG to a direct commandHolger Schurig
Now uses __lbs_cmd() to get the "log" (it's actually more a snapshot of various counters, not a sequential log). Besides the "mechanical" convertion the patch add the following logical changes: * Removes the priv->logmsg variable, it was only used in one place anyway, also don't blindly get the counters when associating. Getting the counters then the user asks via WEXT for them is good enought. * don't set wstats.discard.fragment with log.rxfrag, because the latter is a counter for successfully received packets, not for fragmented packets. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: fix scheduling while atomic bug in CMD_MAC_CONTROLHolger Schurig
The old code incorrectly used lbs_cmd_with_response() and now uses lbs_cmd_async(). While there I noticed that there is no real useful return values for asynchronous command functions, so I made the function "void". Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: make a handy lbs_cmd_async() commandHolger Schurig
This uses a static lbs_cmd_async_callback function, which is a noop. Just setting the callback argument to __lbs_cmd_async() to NULL won't work, because then the cmdnode wouldn't be released. This also makes __lbs_cmd_async() a static method, which is now only used by lbs_cmd() and lbs_cmd_async(). Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: Add debugfs to iwl coreTomas Winkler
This patch adds debugfs support to iwl core currently only iwl4965 is supported Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: Add TX/RX statistcs to driverTomas Winkler
This patch supports collecting of TX and RX statistics in the driver. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: rename struct iwl4965_priv to struct iwl_privTomas Winkler
This patch renames iwl4965_priv to iwl_priv. iwl_priv will be shared by more hw. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: rename iwl-4965-debug.h back to iwl-debug.hTomas Winkler
This patch removes iwl-4965-debug.h to iwl-debug.h It will be used by more NICs Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: Bug fix, CCMP with HW encryption with AGGMax Stepanov
This patch fixes a bug in security. Enables CCMP HW encryption with aggregations. Signed-off-by: Max Stepanov <max.stepanov@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: remove some unused commandsHolger Schurig
Neither CMD_802_11_PAIRWISE_TSC nor CMD_802_11_GROUP_TSC is used or documented. It might have something to do with TKIP sequence counters, but that's just an educated guess. Remove all occurences of them. CMD_CODE_DNLD is also neither used nor documented. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: rename packetfilter to mac_controlHolger Schurig
The CMD_MAC_CONTROL can be used for other things than just filtering packets, e.g. to enable and disable WMM. This uses the same term mac_control for the define, the function and the shadow value in struct lbs_private. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: convert CMD_MAC_CONTROL to a direct commandHolger Schurig
convert CMD_MAC_CONTROL to a direct command Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-26[NET] NETNS: Omit namespace comparision without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce an inline net_eq() to compare two namespaces. Without CONFIG_NET_NS, since no namespace other than &init_net exists, it is always 1. We do not need to convert 1) inline vs inline and 2) inline vs &init_net comparisons. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26[NET] NETNS: Omit neigh_parms->net and pneigh_entry->net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce neigh_parms/pneigh_entry inlines: neigh_parms_net(), pneigh_net(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26[NET] NETNS: Omit seq_net_private->net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Without CONFIG_NET_NS, no namespace other than &init_net exists, no need to store net in seq_net_private. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 05:26:29 +0000