aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-06-03iwlwifi: iwl-5000 add rxon_assocRon Rindjunsky
This patch adds rxon assoc command for 5000 HW. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: implement txq invalidate byte count tableTomas Winkler
This is required to overcome a bug in 5000 HW byte count table. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: move tx reclaim flow into iwl-txTomas Winkler
This patch 1. moves TX reclaim flow into iwl-tx 2. separates command queue and tx queue reclaim flow Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: fix in-column rate scalingGuy Cohen
This patch fixes cases that the code raised or didn't decrease the rate although the success ratio was not good. Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: move 4965 tx response into iwl-4965.cTomas Winkler
This patch moves 4965 tx repsone into iwl-4965.c. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwlifi: impelemnt 5000 tx response pathRon Rindjunsky
This patch implements 5000 HW tx response path. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: move tx response common handlers to iwlcoreTomas Winkler
This pach moves common tx response handlers to the header files and iwl-tx.c. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: add iwl5000_tx_response structureRon Rindjunsky
This patch adds iwl5000_tx_repsons structure. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: activate status ready timeout only for run time ucodeRon Rindjunsky
This patch makes driver state timeout checks on ucode alive response only if run time ucode have been loaded. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi-5000: implement initial calibration for 5000Tomas Winkler
This patch adds initial calibration framework for 5000 HW faimily. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: move iwl_rx_missed_beacon_notif to iwl-rx.cTomas Winkler
This patch moves iwl_rx_missed_beacon_notif rx handler to iwl-rx.c. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: move add sta handler to iwl-sta.cTomas Winkler
This patch moves add_sta hander to iwl-sta.c. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: add remove station functionalityTomas Winkler
This patch adds remove station functionality, which is required for 5000 and AP mode. There are still some gaps in managment that need to be closed but it provides sufficient functionality for 5000 HW. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: move iwl_rxq_stop into iwl-rx.cTomas Winkler
This patch moves iwl_rxq_stop into iwl-rx.c. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: move txq_ctx_stop into iwl-tx.cTomas Winkler
This patch moves txq_ctx_stop into iwl-tx.c iwlcore module. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: refactor stop master functionTomas Winkler
This patch refactors stop master function for 4965 and 5000. Currently it duplicates the function. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: implement apm stop functionTomas Winkler
This patch adds apm stop function for 4965 and 5000. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: implement apm reset flowTomas Winkler
This patch implements apm reset flow for 4965 and 5000. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: setup correctly L1 L0S pi link valuesTomas Winkler
This patch setups L1 L0S pci link values. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: remove 4965 from alive_resp structuresTomas Winkler
This patch removes 4965 from alive_resp and init_alivie_resp. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: clean up alive_start routineTomas Winkler
This patch cleans up alive_start routine. It removes 4965 from the common code and moves the run time calibration reset into a common code. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: remove notif_missed_beacons variableTomas Winkler
This patch removes notif_missed_beacons from priv since it was never used. Missed beacons notification will have only meaning if roaming will be implemented in mac80211. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: remove unused variable form __iwl4965_downTomas Winkler
This patch removes unused variable from __iwl4965_down. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: mark 4965 ucode typesTomas Winkler
This patch marks 4965 ucode types. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: create drivers debugfs dir under wiphy->debugfsdirZhu Yi
This patch creates driver's debugfs tree under wiphy->debugfsdir. This patch fixes collision in debugfs if two or more NICs are plugged. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: increase max payload of iwl_cmdRon Rindjunsky
This patch increases iwl_cmd payload maximum size from 360 to 640 to fit some of iwl5000 commands as well. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: use uCode error and event tables pointer w.r.t loaded imageGregory Greenman
This patch updates the usage of the pointers to error and log tables received in alive response w.r.t. the current uCode image. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: add RTC data address for iwl5000Ron Rindjunsky
This patch fills the valid_rtc_data_addr handler in iwl5000. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: move iwl_dump_nic_error_log to iwlcore moduleEster Kummer
This patch moves the function iwl_dump_nic_error_log to iwlcore. Remove sysfs entry it cannot be really triggered. Signed-off-by: Ester Kummer <ester.kummer@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03mac80211: sends HT IE to user level through wextEmmanuel Grumbach
This patch adds HT IE in the scan list that is returned to user level through wext. This is useful to let wpa_supplicant if a bss supports 11n or not: WEP and TKIP are not supported in 11n. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: fix compact flash interrupt handlingHolger Schurig
The old code misbehaved because it polled card status and always called the "tx over" code-path. This also fixes a hard lockup by not allowing and card interrupts while transferring a TX frame or a command into the card. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: rate adaptation configuration via iwconfig.Javier Cardona
Implemented rate adaptation support via 'iwconfig rate' API. It is now possible to specify a bit-rate value and append 'auto'. That will configure rate adaptation to use all bit-rates equal or lower than than selected value. Made lbs_cmd_802_11_rate_adapt_rateset a direct command. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03b43legacy: fix build errors when DMA or PIO are not selectedJohannes Berg
Currently, b43legacy is broken due to commit fbad4598ca826b994d0fd4ce3deebc9cd1960b31 Author: Johannes Berg <johannes@sipsolutions.net> Date: Thu May 15 12:55:29 2008 +0200 mac80211: move TX info into skb->cb when compiled with only PIO or only DMA because I forgot to update two stubs. This patch fixes it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03mac80211: fix deadlock in sta->lockTomas Winkler
This patch fixes a deadlock of sta->lock use, occurring while changing tx aggregation states, as dev_queue_xmit end up in new function test_and_clear_sta_flags that uses that lock thus leading to deadlock Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03mac80211: fix ieee80211_get_buffered_bcTomas Winkler
fix bss not initialized in ieee80211_get_buffered_bc and unbalanced locking Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03rndis_wlan: use ARRAY_SIZE instead of sizeof when adding 11g ratesScott Ashcroft
While figuring out the TKIP problem I found a bug in the code which adds the 11g rates. It's using sizeof instead of ARRAY_SIZE to terminate the for loop. This makes it fall off the end of the rates array start into the frequency array instead. Running "iwlist rate" should show the problem as there will always be 32 rates with the last few being bogus. The following patch will fix it. Signed-off-by: Scott Ashcroft <scott.ashcroft@talk21.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03ath5k: use IEEE80211_SKB_CBJohannes Berg
ath5k still uses the "(void*) skb->cb" direct cast, use IEEE80211_SKB_CB instead. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: before sleeping, check for a command resultHolger Schurig
If we don't check for a command response early, but rather sleep, then we might sleep despite an already-received command response. This will lead to a command-timeout. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: use lbs_pr_XX instead of printkHolger Schurig
... because lbs_pr_XXX prefixes all messages with "libertas: " Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: speeds up downloading of CF firmwareHolger Schurig
Keep the timeout the same (1000*500 == 100000 * 5), but take shorter naps. Makes downloading the firmware slightly faster. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: don't spin_unlock_irq() twiceHolger Schurig
priv->driver_lock has already been unlocked some lines above. This patch fixes the sparse warning: drivers/net/wireless/libertas/main.c:792:6: warning: context problem in 'lbs_thread': '_spin_unlock_irq' expected different context drivers/net/wireless/libertas/main.c:792:6: context 'lock': wanted >= 1, got 0 Signed-of-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03mac80211: clean up skb reallocation codeJohannes Berg
This cleans up the skb reallocation code to avoid problems with skb->truesize, not resize an skb twice for a single output path because we didn't expand it enough during the first copy and also removes the code to further expand it during crypto operations which will no longer be necessary. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03ps3: gelic: updown_lock semaphore to mutexDaniel Walker
Signed-off-by: Daniel Walker <dwalker@mvista.com> Acked-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03ps3: gelic: assoc_stat_lock semaphore to mutexDaniel Walker
Signed-off-by: Daniel Walker <dwalker@mvista.com> Acked-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03ps3: gelic: scan_lock semaphore to mutexDaniel Walker
Signed-off-by: Daniel Walker <dwalker@mvista.com> Acked-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: provide reset_card() callback on OLPCDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03b43: enable meshJohannes Berg
This patch enables b43 to do mesh networking, tested against my zd1211rw dongle. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21mac80211: remove channel use statisticsJohannes Berg
The useless channel use statistics are quite a lot of code, currently use integer divisions in the packet fast path, are rather inaccurate since they do not account for retries and finally nobody even cares. Hence, remove them completely. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21b43: Add firmware markers supportMichael Buesch
This adds support for firmware markers. With firmware markers it's easily possible to check whether the firmware runs some codepath or not. The driver will throw a message when the firmware executes a MARKER(x). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21b43: Add panic reason code that doesn't trigger restartMichael Buesch
Add a firmware panic reason code that doesn't trigger a restart. This is useful for firmware debugging and avoiding endless restart loops. We can use FWPANIC_DIE to halt the firmware at a well defined point. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-19 07:57:14 +0000