aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-01-28sh: Fix get_user()/put_user() build error.Paul Mundt
Fixes the build error caused by -Werror on gcc 3.x compilers: arch/sh/kernel/signal_32.c: In function `sys_sigaction': arch/sh/kernel/signal_32.c:66: warning: initialization discards qualifiers from pointer target type arch/sh/kernel/signal_32.c:67: warning: initialization discards qualifiers from pointer target type arch/sh/kernel/signal_32.c:69: warning: initialization discards qualifiers from pointer target type arch/sh/kernel/signal_32.c:70: warning: initialization discards qualifiers from pointer target type The mismatch in question was introduced by commit-id 9c5a4eec79b3eb8876d2e7fddfa1e040a7650e55. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add support for SH7721 CPU subtype.Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Provide a stubbed __set_fixmap() for nommu.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Always use CONFIG_HZ for HZ.Paul Mundt
Currently the wdt forces HZ=1000 and sidesteps CONFIG_HZ completely. This is a remnant from when HZ was hardcoded and before CONFIG_HZ was introduced. Additionally, not all of the timers have this requirement these days, so it's also an artificial limitation. Just kill it off and use CONFIG_HZ directly. Reported-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: include/asm-sh/: Spelling fixes.Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: arch/sh/: Spelling fixes.Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix up KERNEL_ENTRY calculation for uImage.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix up binfmt_flat compile warnings.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Kill off pgtable.h from scatterlist.h.Paul Mundt
Fixes up the mmc build. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix up switch_to() type casts.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Stub in page_table_range_init() on nommu.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Use def_bool where possible.Harvey Harrison
Change occurances of: bool default X to: def_bool X Change ocurances of: bool "Foo" default X to: def_bool X prompt "Foo" Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Kill off superfluous __KERNEL__ check in asm/elf.h.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Provide the FPSCR init through AT_FPUCW.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Use utsname()->machine for ELF_PLATFORM.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Encode L1/L2 cache shape in auxvt.Paul Mundt
This adds in the L1I/L1D/L2 cache shape support to their respective entries in the ELF auxvt, based on the Alpha implementation. We use this on the userspace libc side for calculating a tightly packed SHMLBA amongst other things. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Support denormalization on SH-4 FPU.Stuart Menefy
Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix up uImage target entry point.Thomas Betker
This patch changes the uImage target so that it generates a wrapped compressed vmlinux, rather than a wrapped zImage. The previous version matched the ARM, this version matches the PPC. However I would question how useful a self decompressing image is with a boot loader which does decompression, so I think this is more useful. I also feel it matches the descrition in the help text ("Compressed kernel image") better. Signed-off-by: Thomas Betker <thomas.betker@5etech.eu> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: get_user fixes and nommu consolidation.Stuart Menefy
When a get_user(to, from++) is called the pointer increment is performed after its first usage, in the specific after the __add_ok invokation. This causes a wrong get_user return value, putting a wrong character in the destination variable. This patch solves the problem using a new temporary pointer. Additionally this reworks the use of the register banks, allowing for consolidation between the MMU and nommu implementations. Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com> Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Document PTEL 31:29 use on PTEA-wielding parts.Stuart Menefy
Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Populate swapper_pg_dir with fixmap range.Stuart Menefy
This saves us from having to use kmalloc() for the fixmap entries, which is needed early for the uncached fixmap. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Clean up places that make 29-bit physical assumptions.Stuart Menefy
Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Preparation for uncached jumps through PMB.Stuart Menefy
Presently most of the 29-bit physical parts do P1/P2 segmentation with a 1:1 cached/uncached mapping, jumping between the two to control the caching behaviour. This provides the basic infrastructure to maintain this behaviour on 32-bit physical parts that don't map P1/P2 at all, using a shiny new linker section and corresponding fixmap entry. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Explicit alignment for PAGE_SIZE in copy/clear_page().Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: GUSA atomic rollback support.Stuart Menefy
This implements kernel-level atomic rollback built on top of gUSA, as an alternative non-IRQ based atomicity method. This is generally a faster method for platforms that are lacking the LL/SC pairs that SH-4A and later use, and is only supportable on legacy cores. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix compile error of arch/sh/mm/pmb.cNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: comment tidying for sh64->sh migration.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: syscall auditing for sh5, too.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28rtc: rtc-sh: Split out the CPU defs to asm/cpu/.Paul Mundt
With all of the different CPU types this was getting a but unwieldly. Since sh64 is now integrated, we don't have to worry about multiple architectures caring about the header definitions. Split out the defs for each asm/cpu/ to make rtc-sh slightly less visually offensive. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: CCR1->CCR renaming for SH-2 parts.Paul Mundt
Avoid namespace collision with a CCR1 definition. The general SH code always expects CCR anyways, so there's no point in keeping the CCR1 naming around. Fixes up synclink collisions: drivers/char/pcmcia/synclink_cs.c:283:1: warning: "CCR1" redefined In file included from include/asm/cache.h:13, from include/asm/processor_32.h:15, from include/asm/processor.h:60, from include/linux/prefetch.h:14, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/char/pcmcia/synclink_cs.c:38: include/asm/cpu/cache.h:21:1: warning: this is the location of the previous definition Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Bump up ARCH_KMALLOC_MINALIGN for DMA cases.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Invalidate the TLB after applying PMB mappings.Stuart Menefy
Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Provide a 29/32-bit physical hint for bootloaders.Stuart Menefy
Shoves a magic word in to the empty_zero_page section for the bootloader to work out whether to start the kernel in 29-bit or 32-bit mode. [ Renesas CPUs already take care of the initial PMB mappings entirely in hardware and decide on 29-bit/32-bit physical depending on which pin powered up the CPU, so this is mostly for ST parts. -- PFM ]. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add a printk() to warn legacy mem= growers.Stuart Menefy
mem= can't be used to grow the size of kernel memory, so provide a warning to that effect. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: SH-2A FPU support.Paul Mundt
Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add SH7263 CPU support.Paul Mundt
This adds support for the SH7263 (SH-2A) CPU. This particular CPU is a superset of SH7203, adding some additional peripheral blocks and hooking up additional (reserved on SH7203) vectors in the INTC block. No visibly nasty surprises, yet.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix the arch/sh/kernel/traps.c build for sh32.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add SH7203 CPU support.Paul Mundt
This adds support for the SH7203 (SH-2A) CPU. Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28rtc: rtc-sh: SH-2A support.Paul Mundt
Trivial support for the SH-2A on-chip RTC. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: syscall audit support.Yuichi Nakamura
Support syscall auditing.. Signed-off-by: Yuichi Nakamura <ynakam@hitachisoft.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix up uname -m matching for native sh64.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Move mach-cayman in with the rest of the boards.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Kill off the mach-harp and mach-sim machtypes.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix up bug trap handler build for sh32.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Build fixes for lib32 clear_page.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix up default zImage target for sh32.Paul Mundt
This was using the absolute path, which was confusing the make target. Switch it to just 'zImage', as per powerpc. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Bring the SH-5 FPU in line with the SH-4 FPU API.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Get the SH-5 PCI support building.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Bump number of quicklists for SH-5.Paul Mundt
Sync up with the SH definitions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add SH-5 subtypes to check_bugs() for utsname.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>