aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-05-12fix the dynamic allocation and probe in loop.cAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Ken Chen <kenchen@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12SLUB: i386 supportChristoph Lameter
SLUB cannot run on i386 at this point because i386 uses the page->private and page->index field of slab pages for the pgd cache. Make SLUB run on i386 by replacing the pgd slab cache with a quicklist. Limit the changes as much as possible. Leave the improvised linked list in place etc etc. This has been working here for a couple of weeks now. Acked-by: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12compat signalfd and timerfd are cond syscallsHeiko Carstens
Add missing cond_syscall statements for compat_sys_signalfd and compat_sys_timerfd. Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12IPMI: Add PPC openfirmware unregisterChristian Krafft
When trying to load the ipmi_si module on a powerpc with no BMC (baseboard management controller) the driver failes to load correctly, but doesn't unregister itself from of_platform. So, on a second modprobe the kernel crashes. This patch adds the missing unregister call. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12IPMI: fix SI address space settingsCorey Minyard
Fix a rather obvious error that Patrick found in the setup routines. Need to set the proper address space in the ACPI case. Signed-off-by: Corey Minyard <minyard@acm.org> Cc: Patrick Schoeller <Patrick.Schoeller@hp.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12MAINTAINERS: remove invalid list address for TPMStephen Rothwell
This address bounces with "550 Unknown user". Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Kylene Hall <kjhall@us.ibm.com> Cc: Marcel Selhorst <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12Missing include file in tpm_atmel.hStephen Rothwell
On PPC64, we need to include asm/prom.h for function definitions. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12tty: flush flip buffer on ldisc input queue flushPaul Fulghum
Flush the tty flip buffer when the line discipline input queue is flushed, including the user call tcflush(TCIFLUSH/TCIOFLUSH). This prevents unexpected stale data after a user application calls tcflush(). Signed-off-by: Alan Cox <alan@redhat.com> Cc: Antonino Ingargiola <tritemio@gmail.com> Signed-off-by: Paul Fulghum <paulkf@microgate.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12ntfs: use zero_user_pageNate Diller
Use zero_user_page() instead of open-coding it. [akpm@linux-foundation.org: kmap-type fixes] Signed-off-by: Nate Diller <nate.diller@gmail.com> Acked-by: Anton Altaparmakov <aia21@cantab.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12fault injection: disable stacktrace filter for x86-64Akinobu Mita
Disable stacktrace filter support for x86-64 for now. Will be enable when we can get the dwarf2 unwinder back. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Wire up signalfd/timerfd/eventfd syscalls. [SPARC64]: Add support for bq4802 TOD chip, as found on ultra45. [SPARC64]: Correct FIRE_IOMMU_FLUSHINV register offset. [SPARC64]: envctrl.c needs asm/io.h [SPARC64]: Update defconfig. [TTY]: Export proc_clear_tty() to modulea. [SPARC64]: pci_resource_adjust() cannot be __init. [SPARC64]: Spelling fixes. [SPARC]: Spelling fixes. [SPARC64]: Kill LARGE_ALLOCS and update defconfig.
2007-05-12x86_64: use signalfd and timerfd compat syscallsHeiko Carstens
Looks like these two are wired up in a wrong way. Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12x86_64: Add asm/mtrr.h include for some buildsAndi Kleen
The earlier change to call the bp mtrr init from bugs.c broke on some configurations due to missing includes. Noticed by "Avuton Olrich" <avuton@gmail.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12pm3fb: Fix compile error if moduleAntonino A. Daplas
pm3fb_setup() should only compiled if pm3fb is built statically in the kernel. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11[SPARC]: Wire up signalfd/timerfd/eventfd syscalls.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-11[SPARC64]: Add support for bq4802 TOD chip, as found on ultra45.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-11[SPARC64]: Correct FIRE_IOMMU_FLUSHINV register offset.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-11[SPARC64]: envctrl.c needs asm/io.hDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-11[SPARC64]: Update defconfig.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-11[TTY]: Export proc_clear_tty() to modulea.David S. Miller
A use was added to the solaris syscall module which can be built modular. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-11[SPARC64]: pci_resource_adjust() cannot be __init.David S. Miller
Noticed by Meelis Roos. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-11[SPARC64]: Spelling fixes.Simon Arlott
Spelling fixes in arch/sparc64/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-11[SPARC]: Spelling fixes.Simon Arlott
Spelling fixes in arch/sparc/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-11[SPARC64]: Kill LARGE_ALLOCS and update defconfig.David S. Miller
Let's use SLUB, since it works now, in order to get it tested a bit. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (23 commits) [POWERPC] Add arch/powerpc support for the Motorola PrPMC2800 [POWERPC] Add bootwrapper support for Motorola PrPMC2800 platform [POWERPC] Add DTS file for the Motorola PrPMC2800 platform [POWERPC] Check cache coherency of kernel vs firmware [POWERPC] Add Marvell mv64x60 PCI bridge support [POWERPC] Create Marvell mv64x60 I2C platform_data [POWERPC] Create Marvell mv64x60 ethernet platform_data [POWERPC] Create Marvell mv64x60 MPSC (serial) platform_data [POWERPC] Add interrupt support for Marvell mv64x60 chips [POWERPC] Add bootwrapper support for Marvell/mv64x60 I2C [POWERPC] Add bootwrapper support for Marvell MPSC [POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge [POWERPC] Add Makefile rules to wrap dts file in zImage [POWERPC] Spelling fixes: arch/ppc/ [POWERPC] U-boot passes the initrd as start/end, not start/size. [POWERPC] PS3: Update ps3_defconfig [POWERPC] PS3: Fix request_irq warning [POWERPC] Don't complain if size-cells == 0 in prom_parse() [POWERPC] Simplify smp_space_timers [POWERPC] Trivial ps3 warning fixes ...
2007-05-12[POWERPC] Add arch/powerpc support for the Motorola PrPMC2800Dale Farnsworth
This finally adds the PPC_PRPMC2800 Kconfig option, the board setup code (the setup and reset functions) and the defconfig, to support the Motorola PrPMC2800 platform. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Add bootwrapper support for Motorola PrPMC2800 platformMark A. Greer
The Motorola PrPMC280 and PrPMC2800 processor modules sit on an F101 or PrPMC2800 baseboard, respectively. There are several variants of each type of processor module which can have different amounts of memory, amounts of FLASH, cpu frequencies, and an mv64360 or an mv64362. The bootwrapper code for that platform reads VPD from an I2C EEPROM to determine the processor module variant. From the variant, the amount of memory, etc. is determined and the device tree is updated accordingly. If the variant cannot be determined (e.g., corrupted VPD or a previously unknown variant), the property values already in the device tree are used. Also, the firmware for those platforms does not completely configure the mv64x60 host bridge so that configuration is done here. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Add DTS file for the Motorola PrPMC2800 platformMark A. Greer
Add the device tree source file for the prpmc2800 line of processor PMCs. Several of the property values are updated by the bootwrapper but sane defaults have been chosen in case the bootwrapper can't determine the exact processor board variant. The defaults should allow the kernel to boot despite having non-optimal device tree property values. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Check cache coherency of kernel vs firmwareDale Farnsworth
check_cache_coherency() verifies that the cache coherency setting of the kernel (CONFIG_NOT_COHERENT_CACHE) matches that left by the firmware, as indicated by coherency-off device tree property. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Add Marvell mv64x60 PCI bridge supportDale Farnsworth
This patch adds PCI bridge support for the Marvell mv64x60 chip. We also provide the ability to read/write the mv64x60 hotswap register via sysfs if the hs_reg_valid property is set in the device tree. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Create Marvell mv64x60 I2C platform_dataDale Farnsworth
This patch creates platform_device entries for the Marvell mv64x60 I2C ports, based on information contained in device tree. This driver (like the other mv64x60 drivers) are unusual in that it works on both the MIPS and PowerPC architectures. Because of that, the drivers do not support the normal PowerPC of_platform_bus_type. They support platform_bus_type instead. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Create Marvell mv64x60 ethernet platform_dataDale Farnsworth
This patch creates platform_device entries for the Marvell mv64x60 ethernet controller ports, based on information contained in the device tree. This driver (like the other mv64x60 drivers) are unusual in that it works on both the MIPS and PowerPC architectures. Because of that, the drivers do not support the normal PowerPC of_platform_bus_type. They support platform_bus_type instead. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Create Marvell mv64x60 MPSC (serial) platform_dataDale Farnsworth
This patch creates platform_device entries for the Marvell mv64x60 MPSC (multi-protocol serial controller) ports, based on information contained in the device tree. This driver (like the other mv64x60 drivers) are unusual in that it works on both the MIPS and PowerPC architectures. Because of that, the drivers do not support the normal PowerPC of_platform_bus_type. They support platform_bus_type instead. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Add interrupt support for Marvell mv64x60 chipsDale Farnsworth
There are 3 interrupt groups each with its own status/mask registers. We use a separate struct irq_chip for each interrupt group and handle interrupts in two stages or levels: level 1 selects the appropriate struct irq_chip, and level 2 selects individual interrupts within that irq_chip. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Add bootwrapper support for Marvell/mv64x60 I2CMark A. Greer
Some platforms support a variety processor modules with no method of determining which exact processor module is being used except by examining Vital Product Data (VPD). The modules may have different amounts of memory, clock frequencies, etc. so reading the VPD becomes necessary to correctly set properties in the device tree before its passed to the kernel. Often the VPD is stored in I2C EEPROMs so an I2C driver becomes necessary. This I2C driver is for the I2C controller that's embedded on the Marvel mv64x60 line of host bridges. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Add bootwrapper support for Marvell MPSCMark A. Greer
The bootwrapper requires a serial driver to allow cmdline editing and information reporting on the console. This driver is required by platforms that boot a zImage and use the MPSC for the console. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridgeMark A. Greer
The mv64x60 host bridge has many windows between its various components (cpu, system memory, ethernet ctlr, MPSC, DMA ctlr, PCI MEM, PCI I/O). Unfortunately, the firmware on some of mv64x60-based platforms do not properly or completely configure those windows (e.g., MPSC->system memory windows not configured or CPU->PCI MEM space not configured). So, the missing configuration needs to be done in either the bootwrapper or in the kernel. To keep the kernel as clean as possible, it is done in the bootwrapper. Note that I/O controller configuration is NOT being done, its only the windows to allow the I/O controllers and other components to access memory, etc. that is being done--drivers assume that their controllers can already access system memory). Table of routines and the windows they configure: mv64x60_config_ctlr_windows() ENET->System Memory MPSC->System Memory IDMA->System Memory mv64x60_config_pci_windows() PCI MEM->System Memory PCI I/O->Bridge's Registers mv64x60_config_cpu2pci_window() CPU->PCI MEM CPU->PCI I/O Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Add Makefile rules to wrap dts file in zImageMark A. Greer
Add 'zImage.dts' and 'zImage.dts_initrd' build rules that automatically compile and wrap a dts file from arch/powerpc/boot/dts into the zImage file. The resulting zImage will be arch/powerpc/boot/zImage.dts.<platform> and arch/powerpc/boot/zImage.dts_initrd.<platform>, respectively. Having separate rules allows the user to choose whether to include a device tree--and which device tree--at build time. This is useful when one Makefile target builds a zImage that runs on several platforms except for differing device trees. By just setting CONFIG_DEVICE_TREE and running "make zImage.dts" the exact zImage you want is built without Makefile bloat or manually running the wrapper script. The dts file is expected to be arch/powerpc/boot/dts/$(CONFIG_DEVICE_TREE) Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Spelling fixes: arch/ppc/Simon Arlott
Spelling fixes in arch/ppc/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] U-boot passes the initrd as start/end, not start/size.Scott Wood
The boot wrapper platform init code on 83xx and 85xx using the cuboot platform type was incorrectly assuming that u-boot supplied the size of the initrd, whereas it actually supplies the end address. This fixes it. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] PS3: Update ps3_defconfigGeoff Levand
Update ps3_defconfig. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] PS3: Fix request_irq warningGeoff Levand
Fix compiler warning: ps3/smp.c:122: warning: ignoring return value of 'request_irq' Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Don't complain if size-cells == 0 in prom_parse()Kim Phillips
An mdio bus scan was added with ucc_geth phylib migration patches, now machines complain on boot, saying: prom_parse: Bad cell count for /qe@e0100000/mdio@2120/ethernet-phy@00 prom_parse: Bad cell count for /qe@e0100000/mdio@2120/ethernet-phy@01 since size-cells can indeed be 0, this patch fixes the check. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Simplify smp_space_timerswill schmidt
Greatly simplify the function smp_space_timers. The stolen time calculation (per comment within the code) doesn't need the half-jiffy stagger any more. There isn't an issue with bouncing off global locks, so we really shouldn't need any sort of staggering at all. However, the last_jiffy value still needs to be set. This removes the extra stagger logic, and just sets the values. This change should benefit applications that rely on barrier synchronization, and will help cut down OS jitter. Boot tested across the board (G5,power3,power4,power5,970mp blade). Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Trivial ps3 warning fixesStephen Rothwell
Fixes warnings: arch/powerpc/platforms/ps3/system-bus.c: In function 'ps3_map_sg': arch/powerpc/platforms/ps3/system-bus.c:278: warning: unused variable 'i' arch/powerpc/platforms/ps3/system-bus.c:277: warning: unused variable 'dev' arch/powerpc/platforms/ps3/setup.c:103: warning: 'prealloc' defined but not used Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Add missed includeStephen Rothwell
fixes: arch/powerpc/platforms/pasemi/idle.c: In function 'pasemi_system_reset_exception': arch/powerpc/platforms/pasemi/idle.c:55: warning: implicit declaration of function 'do_IRQ' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Remove unused variable in hpte_decode()Stephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Assign correct variable in hpte_decode()Stephen Rothwell
This case will never be hit, but it should be corrected anyway. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-11Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] iTCO_wdt.c - fix ACPI Base register
2007-05-11Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_platform: don't use generic ata_port_start Use menuconfig objects: libata add the ATI SB700 SATA controller device id to AHCI pci table Add the combined mode for ATI SB700 pata_pcmcia: recognize 2GB CompactFlash from Transcend git-libata-all: sata_via build fix libata-acpi: clean up parameters and misc stuff libata-acpi: s/CONFIG_SATA_ACPI/CONFIG_ATA_ACPI/ libata: give devices one last chance even if recovery failed with -EINVAL libata: fallback to the other IDENTIFY on device error, take#2 libata: ignore EH scheduling during initialization libata: clean up SFF init mess libata: implement libata.spindown_compat libata: reimplement suspend/resume support using sdev->manage_start_stop