aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-09-09[CRYPTO] blkcipher: Fix handling of kmalloc page straddlingHerbert Xu
The function blkcipher_get_spot tries to return a buffer of the specified length that does not straddle a page. It has an off-by-one bug so it may advance a page unnecessarily. What's worse, one of its callers doesn't provide a buffer that's sufficiently long for this operation. This patch fixes both problems. Thanks to Bob Gilligan for diagnosing this problem and providing a fix. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-09-09[Bluetooth] Fix parameter list for event filter commandMarcel Holtmann
On device initialization the event filters are cleared. In case of clearing the filters the extra condition type shall be omitted. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-09-09[Bluetooth] Update security filter for Bluetooth 2.1Marcel Holtmann
This patch updates the HCI security filter with support for the Bluetooth 2.1 commands and events. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-09-09[Bluetooth] Add compat handling for timestamp structureMarcel Holtmann
The timestamp structure needs special handling in case of compat programs. Use the same wrapping method the network core uses. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-09-09[Bluetooth] Add missing stat.byte_rx counter modificationMarcel Holtmann
With the support for hci_recv_fragment() the call to increase the stat.byte_rx counter got accidentally removed. This patch fixes it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-09-07firewire: fw-ohci: ignore failure of pci_set_power_state (fix suspend ↵Stefan Richter
regression) Fixes (papers over) "Sleep problems with kernels >= 2.6.21 on powerpc", http://lkml.org/lkml/2007/8/25/155. The issue is that the FireWire controller's pci_dev.current_state of iBook G3 and presumably older PowerBooks is still in PCI_UNKNOWN instead of PCI_D0 when the firewire driver's .suspend method is called. Like it was suggested earlier in http://lkml.org/lkml/2006/10/24/13, we do not fail .suspend anymore if pci_set_power_state failed. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-09-06m32r: Rename STI/CLI macrosHirokazu Takata
The names of STI and CLI macros were derived from i386 arch historically, but their name are incomprehensible. So, for easy to understand, rename these macros to ENABLE_INTERRUPTS and DISABLE_INTERRUPTS, respectively. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-06m32r: build fix of entry.SHirokazu Takata
This patch fixes the following compile error: <-- snip --> ... AS arch/m32r/kernel/entry.o /home/bunk/linux/kernel-2.6/linux-2.6.23-rc3-mm1/arch/m32r/kernel/entry.S: Assembler messages: /home/bunk/linux/kernel-2.6/linux-2.6.23-rc3-mm1/arch/m32r/kernel/entry.S:358: Error: bad instruction `addi r0,#(((((0)+(64))+(32))+(32)))' make[2]: *** [arch/m32r/kernel/entry.o] Error 1 <-- snip --> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Cc: Adrian Bunk <bunk@kernel.org>
2007-09-05sched: fix ideal_runtime calculations for reniced tasksPeter Zijlstra
fix ideal_runtime: - do not scale it using niced_granularity() it is against sum_exec_delta, so its wall-time, not fair-time. - move the whole check into __check_preempt_curr_fair() so that wakeup preemption can also benefit from the new logic. this also results in code size reduction: text data bss dec hex filename 13391 228 1204 14823 39e7 sched.o.before 13369 228 1204 14801 39d1 sched.o.after Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05sched: improve prev_sum_exec_runtime settingPeter Zijlstra
Second preparatory patch for fix-ideal runtime: Mark prev_sum_exec_runtime at the beginning of our run, the same spot that adds our wait period to wait_runtime. This seems a more natural location to do this, and it also reduces the code a bit: text data bss dec hex filename 13397 228 1204 14829 39ed sched.o.before 13391 228 1204 14823 39e7 sched.o.after Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05sched: simplify __check_preempt_curr_fair()Peter Zijlstra
Preparatory patch for fix-ideal-runtime: simplify __check_preempt_curr_fair(): get rid of the integer return. text data bss dec hex filename 13404 228 1204 14836 39f4 sched.o.before 13393 228 1204 14825 39e9 sched.o.after functionality is unchanged. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05sched: fix xtensa build warningIngo Molnar
rename RSR to SRR - 'RSR' is already defined on xtensa. found by Adrian Bunk. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05sched: debug: fix sum_exec_runtime clearingIngo Molnar
when cleaning sched-stats also clear prev_sum_exec_runtime. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05sched: debug: fix cfs_rq->wait_runtime accountingIngo Molnar
the cfs_rq->wait_runtime debug/statistics counter was not maintained properly - fix this. this also removes some code: text data bss dec hex filename 13420 228 1204 14852 3a04 sched.o.before 13404 228 1204 14836 39f4 sched.o.after Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2007-09-05sched: fix niced_granularity() shiftIngo Molnar
fix niced_granularity(). This resulted in under-scheduling for CPU-bound negative nice level tasks (and this in turn caused higher than necessary latencies in nice-0 tasks). Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05sched: fix MC/HT scheduler optimization, without breaking the FUZZ logic.Suresh Siddha
First fix the check if (*imbalance + SCHED_LOAD_SCALE_FUZZ < busiest_load_per_task) with this if (*imbalance < busiest_load_per_task) As the current check is always false for nice 0 tasks (as SCHED_LOAD_SCALE_FUZZ is same as busiest_load_per_task for nice 0 tasks). With the above change, imbalance was getting reset to 0 in the corner case condition, making the FUZZ logic fail. Fix it by not corrupting the imbalance and change the imbalance, only when it finds that the HT/MC optimization is needed. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05[XFS] fix nasty quota hashtable allocation bugEric Sandeen
This git mod: 77e4635ae191774526ed695482a151ac986f3806 converted to a "greedy" allocation interface, but for the quota hashtables it switched from allocating XFS_QM_HASHSIZE (nr of elements) xfs_dqhash_t's to allocating only XFS_QM_HASHSIZE *bytes* - quite a lot smaller! Then when we converted hsize "back" to nr of elements (the division line) hsize went to 0. This was leading to oopses when running any quota tests on the Fedora 8 test kernel, but the problem has been there for almost a year. SGI-PV: 968837 SGI-Modid: xfs-linux-melb:xfs-kern:29354a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-09-05[XFS] fix sparse shadowed variable warningsChristoph Hellwig
- in xfs_probe_cluster rename the inner len to pg_len. There's no harm here because the outer len isn't used after the inner len comes into existence but it keeps the code clean. - in xfs_da_do_buf remove the inner i because they don't overlap and they are both the same type. SGI-PV: 968555 SGI-Modid: xfs-linux-melb:xfs-kern:29311a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-09-05[XFS] fix ASSERT and ASSERT_ALWAYSChristoph Hellwig
- remove the != 0 inside the unlikely in ASSERT_ALWAYS because sparse now complains about comparisons between pointers and 0 - add a standalone ASSERT implementation because defining it to ASSERT_ALWAYS means the string is expanded before the token passing stringification. This way we get the actual content of the assertion in the assfail message and don't overflow sparse's stringification buffer leading to sparse error messages. SGI-PV: 968555 SGI-Modid: xfs-linux-melb:xfs-kern:29310a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-09-05[XFS] Fix sparse warning in kmem_shake_allowChristoph Hellwig
We can't return a masked result of a __bitwise type. Compare it to 0 first to keep the behaviour without the warning. SGI-PV: 968555 SGI-Modid: xfs-linux-melb:xfs-kern:29309a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-09-05[XFS] Fix sparse NULL vs 0 warningsChristoph Hellwig
Sparse now warns about comparing pointers to 0, so change all instance where that happens to NULL instead. SGI-PV: 968555 SGI-Modid: xfs-linux-melb:xfs-kern:29308a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-09-05[XFS] Set filestreams object timeout to something sane.David Chinner
SGI-PV: 968554 SGI-Modid: xfs-linux-melb:xfs-kern:29303a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-09-05[x86 setup] Work around bug in Xen HVMChristian Ehrhardt
Apparently XEN does not keep the contents of the 48-bit gdt_48 data structure that is passed to lgdt in the XEN machine state. Instead it appears to save the _address_ of the 48-bit descriptor somewhere. Unfortunately this data happens to reside on the stack and is probably no longer availiable at the time of the actual protected mode jump. This is Xen bug but given that there is a one-line patch to work around this problem, the linux kernel should probably do this. My fix is to make the gdt_48 description in setup_gdt static (in setup_idt this is already the case). This allows the kernel to boot under Xen HVM again. Signed-off-by: Christian Ehrhardt <lk@c--e.de> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-09-04Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2007-09-04Merge branch 'for_linus' of git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds
2007-09-04Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
2007-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixLinus Torvalds
2007-09-04Merge git://git.infradead.org/~dwmw2/mtd-2.6.23Linus Torvalds
2007-09-03m32r: Separate syscall table from entry.SHirokazu Takata
- Separate sys_call_table from arch/m32r/kernel/entry.S and move it to arch/m32r/kernel/system_call.S. - Change sys_call_table section from .data to .rodata. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Cosmetic updates of arch/m32r/kernel/entry.SHirokazu Takata
- Remove unused symbols *_MASK - Change indentation of comments, etc. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Exit ei_handler directly for no IRQ case or IPI operationsHirokazu Takata
If no IRQ request is found in the IRQ check of ei_handler, we can exit directly by jumping "restore_all", instead of via "ret_from_intr". This modification is also likely effective for IPI operations, because scheduler call never happen at the exit of IPIs. Signed-off-by: Hitoshi Yamamoto <hitoshiy@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Simplify ei_handler codeHirokazu Takata
Simplify and clean up messy ei_handler code in arch/m32r/kernel/entry.S. - Remove ifdef's for CONFIG_CHIP_* configulations. - Rearrange the M32700 workaround code. - Remove the messy platform-dependent interrupt check routines and consolidate them to common INT0/INT1/INT2 check routines for all platforms with cascaded interrupt controllers. Signed-off-by: Hitoshi Yamamoto <hitoshiy@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Define symbols to unify platform-dependent ICU checksHirokazu Takata
On some m32r platforms, cascaded ICUs are used. This patch is required to simplify ei_handler and consolidate platform- dependent ICU check routines. platform ICU/INT1 ICU/INT0 ICU/INT2 -------------- -------- -------- -------- m32104ut o - - m32700ut o o o opsput o o o usrv o - - (others) - - - Signed-off-by: Hitoshi Yamamoto <hitoshiy@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Move dot.gdbinit filesHirokazu Takata
Move dot.gdbinit files from arch/m32r/{platforms}/dot.gdbinit* to arch/m32r/platforms/{platform}/. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Rearrange platform-dependent codesHirokazu Takata
Rearrange platform-dependent codes from arch/m32r/kernel/*.c to arch/m32r/platforms/{platform}/. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Add defconfig file for the usrv platform.Hirokazu Takata
Add usrv_defcofig file for the usrv (M32R MicroServer) platform. platform defconfig Note ---------- ---------------------- --------------------------- usrv usrv_defconfig SMP Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Update defconfig files for 2.6.23-rc1Hirokazu Takata
Update defconfig files for 2.6.23-rc1 in arch/m32r/configs/. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Move defconfig files to arch/m32r/configs/Hirokazu Takata
Change defconfig file's location from arch/m32r/{platform}/defconfig* to arch/m32r/configs/{platform}_defconfig. Applying this patch, we can use defconfig file for each m32r platform easily, like other architectures. ex. Setup defconfig for cross-building $ make ARCH=m32r CROSS_COMPILE=m32r-linux-gnu- {platform}_defconfig. platform defconfig Note ---------- ---------------------- --------------------------- m32104ut m32104ut_defconfig MMU-less m32700ut m32700ut.smp_defconfig SMP m32700ut m32700ut.up_defconfig UP mappi mappi.smp_defconfig SMP mappi mappi.up_defconfig UP mappi mappi.nommu_defconfig MMU-less mappi2 mappi2.opsp_defconfig FPGA env. (CPU Core: OPSP) mappi2 mappi2.vdec2_defconfig FPGA env. (CPU Core: VDEC2) mappi3 imappi3.smp_defconfig SMP oaks32r oaks32r_defconfig MMU-less opsput opsput_defconfig UP Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-02[MTD] Initialise s_flags in get_sb_mtd_aux()David Howells
Initialise s_flags in get_sb_mtd_aux() from the flags parameter. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-09-02[JFFS2] fix write deadlock regressionJason Lunz
I've bisected the deadlock when many small appends are done on jffs2 down to this commit: commit 6fe6900e1e5b6fa9e5c59aa5061f244fe3f467e2 Author: Nick Piggin <npiggin@suse.de> Date: Sun May 6 14:49:04 2007 -0700 mm: make read_cache_page synchronous Ensure pages are uptodate after returning from read_cache_page, which allows us to cut out most of the filesystem-internal PageUptodate calls. I didn't have a great look down the call chains, but this appears to fixes 7 possible use-before uptodate in hfs, 2 in hfsplus, 1 in jfs, a few in ecryptfs, 1 in jffs2, and a possible cleared data overwritten with readpage in block2mtd. All depending on whether the filler is async and/or can return with a !uptodate page. It introduced a wait to read_cache_page, as well as a read_cache_page_async function equivalent to the old read_cache_page without any callers. Switching jffs2_gc_fetch_page to read_cache_page_async for the old behavior makes the deadlocks go away, but maybe reintroduces the use-before-uptodate problem? I don't understand the mm/fs interaction well enough to say. [It's fine. dwmw2.] Signed-off-by: Jason Lunz <lunz@falooley.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-09-01NFS: Fix a write request leak in nfs_invalidate_page()Trond Myklebust
Ryusuke Konishi says: The recent truncate_complete_page() clears the dirty flag from a page before calling a_ops->invalidatepage(), ^^^^^^ static void truncate_complete_page(struct address_space *mapping, struct page *page) { ... cancel_dirty_page(page, PAGE_CACHE_SIZE); <--- Inserted here at kernel 2.6.20 if (PagePrivate(page)) do_invalidatepage(page, 0); ---> will call a_ops->invalidatepage() ... } and this is disturbing nfs_wb_page_priority() from calling nfs_writepage_locked() that is expected to handle the pending request (=nfs_page) associated with the page. int nfs_wb_page_priority(struct inode *inode, struct page *page, int how) { ... if (clear_page_dirty_for_io(page)) { ret = nfs_writepage_locked(page, &wbc); if (ret < 0) goto out; } ... } Since truncate_complete_page() will get rid of the page after a_ops->invalidatepage() returns, the request (=nfs_page) associated with the page becomes a garbage in nfs_inode->nfs_page_tree. ------------------------ Fix this by ensuring that nfs_wb_page_priority() recognises that it may also need to clear out non-dirty pages that have an nfs_page associated with them. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-09-01NFS: change NFS mount error return when hostname/pathname too longChuck Lever
According to the mount(2) man page, the proper error return code for the mount(2) system call when the special device name or the mounted-on directory name is too long is ENAMETOOLONG. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-09-01NFS: Off-by-one length error in string handlingChuck Lever
The hostname was getting truncated in the new text-based NFS mount API. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-09-01NFS: Return a real error code from mount(2)Chuck Lever
Don't filter the return code from the in-kernel rpcbind or NFS mount clients. Return the real error code so that callers of the new NFS text-based mount API can apply a useful retry strategy. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-09-01NFS: mount option parser chokes on proto=Chuck Lever
The new text-based NFS mount option parsing logic doesn't recognize any valid transport protocols due to a silly mistake in the protocol token matching logic. This prevents basic mount requests such as: mount.nfs server:/export /mnt -o proto=tcp from working with the new text-based NFS mount API. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-09-01NFSv4: Ensure that we pass the correct dentry to nfs4_intent_set_fileTrond Myklebust
This patch fixes an Oops that was reported by Gabriel Barazer. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-09-01NFSv4: Fix a typo in _nfs4_do_open_reclaimTrond Myklebust
This should fix the following Oops reported by Jeff Garzik: kernel BUG at fs/nfs/nfs4xdr.c:1040! invalid opcode: 0000 [1] SMP CPU 0 Modules linked in: nfs lockd sunrpc af_packet ipv6 cpufreq_ondemand acpi_cpufreq battery floppy nvram sg snd_hda_intel ata_generic snd_pcm_oss snd_mixer_oss snd_pcm i2c_i801 snd_page_alloc e1000 firewire_ohci ata_piix i2c_core sr_mod cdrom sata_sil ahci libata sd_mod scsi_mod ext3 jbd ehci_hcd uhci_hcd Pid: 16353, comm: 10.10.10.1-recl Not tainted 2.6.23-rc3 #1 RIP: 0010:[<ffffffff88240980>] [<ffffffff88240980>] :nfs:encode_open+0x1c0/0x330 RSP: 0018:ffff8100467c5c60 EFLAGS: 00010202 RAX: ffff81000f89b8b8 RBX: 00000000697a6f6d RCX: ffff81000f89b8b8 RDX: 0000000000000004 RSI: 0000000000000004 RDI: ffff8100467c5c80 RBP: ffff8100467c5c80 R08: ffff81000f89bc30 R09: ffff81000f89b83f R10: 0000000000000001 R11: ffffffff881e79e0 R12: ffff81003cbd1808 R13: ffff81000f89b860 R14: ffff81005fc984e0 R15: ffffffff88240af0 FS: 0000000000000000(0000) GS:ffffffff8052a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00002adb9e51a030 CR3: 000000007ea7e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process 10.10.10.1-recl (pid: 16353, threadinfo ffff8100467c4000, task ffff8100038ce780) Stack: ffff81004aeb6a40 ffff81003cbd1808 ffff81003cbd1808 ffffffff88240b5d ffff81000f89b8bc ffff81005fc984e8 ffff81000f89bc30 ffff81005fc984e8 0000000300000000 0000000000000000 0000000000000000 ffff81003cbd1800 Call Trace: [<ffffffff88240b5d>] :nfs:nfs4_xdr_enc_open_noattr+0x6d/0x90 [<ffffffff881e74b7>] :sunrpc:rpcauth_wrap_req+0x97/0xf0 [<ffffffff88240af0>] :nfs:nfs4_xdr_enc_open_noattr+0x0/0x90 [<ffffffff881df57a>] :sunrpc:call_transmit+0x18a/0x290 [<ffffffff881e5e7b>] :sunrpc:__rpc_execute+0x6b/0x290 [<ffffffff881dff76>] :sunrpc:rpc_do_run_task+0x76/0xd0 [<ffffffff882373f6>] :nfs:_nfs4_proc_open+0x76/0x230 [<ffffffff88237a2e>] :nfs:nfs4_open_recover_helper+0x5e/0xc0 [<ffffffff88237b74>] :nfs:nfs4_open_recover+0xe4/0x120 [<ffffffff88238e14>] :nfs:nfs4_open_reclaim+0xa4/0xf0 [<ffffffff882413c5>] :nfs:nfs4_reclaim_open_state+0x55/0x1b0 [<ffffffff882417ea>] :nfs:reclaimer+0x2ca/0x390 [<ffffffff88241520>] :nfs:reclaimer+0x0/0x390 [<ffffffff8024e59b>] kthread+0x4b/0x80 [<ffffffff8020cad8>] child_rip+0xa/0x12 [<ffffffff8024e550>] kthread+0x0/0x80 [<ffffffff8020cace>] child_rip+0x0/0x12 Code: 0f 0b eb fe 48 89 ef c7 00 00 00 00 02 be 08 00 00 00 e8 79 RIP [<ffffffff88240980>] :nfs:encode_open+0x1c0/0x330 RSP <ffff8100467c5c60> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-09-01NFS: Fix use of cancel_delayed_work_sync in nfs_release_automount_timerTrond Myklebust
Doh! We can't use cancel_delayed_work_sync because we may have been called from an unmount that was being performed by nfs_automount_task. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-09-01Fix sata_via write errors on PATA drive connected to VT6421Ondrej Zary
I think that I've found and fixed the problem. There is a copy/paste bug in vt6421_set_dma_mode() function which causes wrong values to be written to PATA_UDMA_TIMING register. This patch fixes a copy/paste bug that breaks DMA modes on VT6421 PATA port. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-01[libata] ata_piix: properly terminate DMI system listJeff Garzik
If you don't terminate a list, bad things happen... Signed-off-by: Jeff Garzik <jeff@garzik.org>