aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-06-28[ALSA] Add Intel D965 board supportTakashi Iwai
Added the support for Intel D965 boards with STAC9227 codec. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] Fix/add support of Realtek ALC883 / ALC888 and ALC861 codecsTakashi Iwai
Patch from Realtek: - Fix ALC883 support code - Add support of ALC888 codec - Add ALC660 support (ALC861-compatible) - Add HP xw4400/6400/8400/9400 support (model=hp-bpc) - Code clean-up: fix spaces and indentation Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] Fix a typo in echoaudio/midi.cTakashi Iwai
Fixed a typo in echoaudio/midi.c. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] snd-aoa: enable dual-edge in GPIOsJohannes Berg
Apparently some firmware versions forget enabling the dual-edge bit, snd-powermac did that too and even OSX does sometimes. This should fix headphone plug detection on those machines. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] snd-aoa: support iMac G5 iSightJohannes Berg
This properly adds support for the iMac G5 iSight. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] snd-aoa: not experimentalJohannes Berg
The dependencies in the soundbus Kconfig were wrong, it isn't experimental any more. This patch fixes that and makes it select SND_PCM too instead of depending on it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] Add echoaudio sound driversGiuliano Pochini
From: Giuliano Pochini <pochini@shiny.it>Add echoaudio sound drivers (darla20, darla24, echo3g, gina20, gina24, indigo, indigodj, indigoio, layla20, lala24, mia, mona) Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] ak4xxx-adda - Code clean-upTakashi Iwai
Fix spaces, fold lines to fit 80 columns in ak4xxx-adda driver codes. Split a long reset function to each codec routine just for better readability. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] Remove CONFIG_EXPERIMENTAL from intel8x0m driverTakashi Iwai
Removed CONFIG_EXPERIMENTAL from intel8x0m driver. The driver has been working well without problems. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] Stereo controls for M-Audio Revolution cardsJani Alinikula
This patch adds stereo controls to revo cards by making the ak4xxx driver mixers configurable from the card driver. Signed-off-by: Jani Alinikula <janialinikula@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] Fix misuse of __list_add() in seq_ports.cTakashi Iwai
seq_ports.c::snd_seq_delete_all_ports() uses __list_add() to replace the whole list entries. This results in BUG() with recent FC5 kernel due to a sanity check in __list_add(). The patch fixes this misue of __list_add() by using standard macros instead (although a bit more code is needed). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] hda-codec - Add model entry for Samsung X60 ChaneTakashi Iwai
Added the model entry 'laptop-eapd' for Samsung X60 Chane with AD1986A codec. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] make CONFIG_SND_DYNAMIC_MINORS non-experimentalClemens Ladisch
The dynamic minors code is mature, has been tested, and seems to work fine. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] Fix wrong dependencies of snd-aoa driverTakashi Iwai
Fixed wrong dependencies of snd-aoa driver. It selects PCM instead. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] fix build failure due to snd-aoaTakashi Iwai
When snd-aoa is not built or built as modules, but CONFIG_SND is yes, kernel build fails due to a bug I introduced when adding snd-aoa. This patch fixes it. From: Takashi Iwai <tiwai@suse.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] AD1888 mixer controls for DC modeJaya Kumar
This patch adds two mixer controls. The V_REFOUT enable is a documented register that couples the microphone input lines to the V_REFOUT DC source. The High Pass Filter enable in the AC97_AD_TEST2 (0x5c) is an undocumented register provided by Miller Puckette via Analog Devices that enables the AD codec to apply a high pass filter to the input. Signed-off-by: Jaya Kumar <jayakumar.alsa@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] Suppress irq handler mismatch messages in ALSA ISA driversTakashi Iwai
Suppress 'irq handler mismatch' messages at auto-probing of irqs in ALSA ISA drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] usb-audio support for Turtle Beach RoadieSam Revitch
From: Sam Revitch <sam.revitch@gmail.com>Recently a Turtle Beach Audio Advantage Roadie device ended up in my possession. It seems to work with the snd-usb-audio driver, but only using the headphone jack in 2-channel mode. The device has a DIN connector carrying six more channels that are otherwise silent. C-Media has freely available documentation for the CM106 chip around which this device is based, and enabling 8-channel output, or 6-channel output with the headphone jack following the front pair is a matter of setting one of its registers. Attached is a patch to try to enable 5.1 output mode at probe time. It seems to work correctly with my device. There is quite list of other configurables for this device that might deserve controls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-27Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [netdrvr] Remove long-unused bits from Becker template drivers [netdrvr] natsemi: minor cleanups [netdrvr] natsemi: Separate out media initialization code [PATCH] WAN: update info page for a bunch of my drivers [PATCH] drivers/net/hamradio/dmascc.c: fix section mismatch [PATCH] Fix phy id for LXT971A/LXT972A [PATCH] DM9000 - minor code cleanups [PATCH] DM9000 - do no re-init spin lock [PATCH] DM9000 - check for MAC left in by bootloader [PATCH] DM9000 - better checks for platform resources
2006-06-27Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: [MTD] NAND: Select chip before checking write protect status [MTD] CORE mtdchar.c: fix off-by-one error in lseek() [MTD] NAND: Fix typo in mtd/nand/ts7250.c [JFFS2][XATTR] coexistence between xattr and write buffering support. [JFFS2][XATTR] Fix wrong copyright [JFFS2][XATTR] Re-define xd->refcnt as atomic_t [JFFS2][XATTR] Fix memory leak with jffs2_xattr_ref [JFFS2][XATTR] rid unnecessary writing of delete marker. [JFFS2][XATTR] Fix ACL bug when updating null xattr by null ACL. [JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion [MTD] Fix off-by-one error in physmap.c [MTD] Remove unused 'nr_banks' variable from ixp2000 map driver [MTD NAND] s3c2412 support in s3c2410.c [MTD] Initialize 'writesize' [MTD] NAND: ndfc fix address offset thinko [MTD] NAND: S3C2410 convert prinks to dev_*()s [MTD] NAND: Missing fixups
2006-06-27Merge git://oss.sgi.com:8090/nathans/xfs-2.6Linus Torvalds
* git://oss.sgi.com:8090/nathans/xfs-2.6: [XFS] Fixup whitespace damage in log_write, remove final warning. [XFS] Rework code snippets slightly to remove remaining recent-gcc [XFS] Fix realtime subvolume expansion, a porting bug b0rked it. Coverity [XFS] Remove a race condition where a linked inode could BUG_ON in [XFS] Remove redundant directory checks from inode link operation. [XFS] Remove a couple of no-longer-used macros. [XFS] Reduce size of xfs_trans_t structure. * remove ->t_forw, ->t_back -- [XFS] remove unused behaviour lock - shrink XFS vnode as a side effect. [XFS] * There is trivial "inode => vnode => inode" conversion, but only [XFS] link(2) on directory is banned in VFS.
2006-06-27Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] ata_piix: add ICH6/7/8 to Kconfig [PATCH] sata_sil: disable hotplug interrupts on two ATI IXPs [PATCH] libata: cosmetic updates [PATCH] ata: add some NVIDIA chipset IDs [PATCH] libata reduce timeouts [PATCH] libata: implement ata_port_max_devices() [PATCH] libata: make two functions global [PATCH] libata: update ata_do_simple_cmd() [PATCH] libata: move ata_do_simple_cmd() below ata_exec_internal() [PATCH] libata: clear EH action on device detach [PATCH] libata: implement and use ata_deh_dev_action() [PATCH] libata: move ata_eh_clear_action() upward [PATCH] libata.h needs scatterlist.h [libata] sata_vsc: partially revert a PCI ID-related commit [libata] Bump versions
2006-06-27Properly delete sound/ppc/toonie.cLinus Torvalds
The previous "delete" had actually just truncated it to a zero size, something that can easily happen if you just apply a patch. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] i2c-i801.c: don't pci_disable_device() after it was just enabledDaniel Ritz
Commit 02dd7ae2892e5ceff111d032769c78d3377df970 ("[PATCH] i2c-i801: Merge setup function") has a missing return 0 in the _probe() function. This means the error path is always executed and pci_disable_device() is called even when the device just got successfully enabled. Having the SMBus device disabled makes some systems (eg. Fujitsu-Siemens Lifebook E8010) hang hard during power-off. Intead of reverting the whole commit this patch fixes it up: - don't ever call pci_disable_device(), also not in the _remove() function to avoid hangs - fix missing pci_release_region() in error path Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (25 commits) [CIFS] Fix authentication choice so we do not force NTLMv2 unless the [CIFS] Fix alignment of unicode strings in previous patch [CIFS] Fix allocation of buffers for new session setup routine to allow [CIFS] Remove calls to to take f_owner.lock [CIFS] remove some redundant null pointer checks [CIFS] Fix compile warning when CONFIG_CIFS_EXPERIMENTAL is off [CIFS] Enable sec flags on mount for cifs (part one) [CIFS] Fix suspend/resume problem which causes EIO on subsequent access to [CIFS] fix minor compile warning when config_cifs_weak_security is off [CIFS] NTLMv2 support part 5 [CIFS] Add support for readdir to legacy servers [CIFS] NTLMv2 support part 4 [CIFS] NTLMv2 support part 3 [CIFS] NTLMv2 support part 2 [CIFS] Fix mask so can set new cifs security flags properly CIFS] Support for older servers which require plaintext passwords - part 2 [CIFS] Support for older servers which require plaintext passwords [CIFS] Fix mapping of old SMB return code Invalid Net Name so it is [CIFS] Missing brace [CIFS] Do not overwrite aops ...
2006-06-27[PATCH] m68knommu: use Kconfig RAM config options in 68328 startup codeGreg Ungerer
Switch to using the new RAM Kconfig settings, instead of linker defined regions in ROM specific 68328 startup code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] m68knommu: use Kconfig RAM config options in 68360 ROM startup codeGreg Ungerer
Switch to using the new RAM Kconfig settings, instead of linker defined regions in ROM specific 68360 startup code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] m68knommu: use Kconfig RAM config options in 68360 RAM startup codeGreg Ungerer
Switch to using the new RAM Kconfig settings, instead of linker defined regions in RAM specific 68360 startup code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] m68knommu: remove NO_FORMAT_VECi from ptrace.h headerGreg Ungerer
Remove NO_FORMAT_VEC conditional check. It is not used or defined anywhere. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] m68knommu: FEC driver event/irq fixesGreg Ungerer
Collection of fixes for the ColdFire FEC ethernet driver: . reworked event setting so that it occurs after the MII setup. roucaries bastien <roucaries.bastien@gmail.com> . Do not read cbd_sc in memory for each bit we test. Once per buffer is enough. . Overrun errors must increase `rx_fifo_errors', not `rx_crc_errors' . No need for a special value to activate rx or tx. Only write access matters. . Simplify parameter of eth_copy_and_sum : `data' has already the right value. . Some spelling fixes. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] m68knommu: FEC driver set different priority/level on each IRQWillson Callan
Set different irq priority levels for each IRQ requested. According to the Freescale ColdFire documentation each separate IRQ must have its own unique priority/level combination. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] m68knommu: FEC driver support for the ColdFire 523x CPU familyMatt Waddel
Add support for the FEC module in the ColdFire 532x CPU family. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] m68knommu: avoid fec driver hang when link disappearsPhilippe De Muyter
Avoid requesting a `Graceful Transmit Stop' when link has disappeared, because that request cannot complete without link. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] m68knommu: update m68knommu defconfnigGreg Ungerer
Updated defconfig for m68knommu arch. Includes recent changes to the clock and RAM configuration options. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] m68knommu: build support for the Freescale 532x CPU familyMatt Waddel
Add build support for the M523x ColdFire CPU family. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] m68knommu: build support for the Avnet/5282 boardDaniel Alomar
Add support for the Avnet/5282 board. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] m68knommu: remove useless compiler argsPhilipe De Muyter
Here is a small patch that made my kernel .text segment shrink by 8k IIRC on my 5272-based board, by removing `-Wa,-S' from CFLAGS. The `-Wa,-S' option prevents `gas' from using short forms of jsr. Without it, `gas' replaces `jsr xxx.l' (6 bytes) by `jsr xxx@pc' (4 bytes) when possible. On 5272, both forms are equally fast. The `-Wa,-m5307' option is useless, because gcc already gives it to `gas' from the `-m5307' option. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] voyager: add cpu_present_mapJames Bottomley
Voyager stopped booting some time in the 2.6.16-2.6.17 timeframe; the reason was that it doesn't have a cpu_present_map, so add one. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (26 commits) V4L/DVB (4263): Fix warning when compiling on 64 bit machines V4L/DVB (4261): Included required header for in-kernel compilation V4L/DVB (4260): Stradis.c: make 2 functions static V4L/DVB (4259): Pass an explicit log prefix to cx2341x_log_status V4L/DVB (4257): Fix 64-bit compile warnings. V4L/DVB (4255): Tda9887 default TOP value is 0x10 V4L/DVB (4254): Remove obsoleted tuner_debug option. V4L/DVB (4253): IVTV VBI format description too long. V4L/DVB (4252): Remove duplicate 'tda9887' in info messages. V4L/DVB (4245): Reduce the amount of pvrusb2-sourced noise going into the system log V4L/DVB (4244): Implement use of cx2341x module in pvrusb2 driver V4L/DVB (4243): Exploit new V4L control features in pvrusb2 V4L/DVB (4242): Don't suspend encoder when changing its attributes (in pvrusb2) V4L/DVB (4241): Fix faulty encoder error recovery in pvrusb2 V4L/DVB (4240): Various V4L control enhancements in pvrusb2 V4L/DVB (4239): Handle boolean controls in pvrusb2 V4L/DVB (4238): Make sure flags field is initialized when quering a control in pvrusb2 V4L/DVB (4237): Move LOG_STATUS bracketing to a different part of the pvrusb2 driver V4L/DVB (4236): Rearrange things in pvrusb2 driver in preparation for using cx2341x module V4L/DVB (4235): Increase the maximum number of controls that pvrusb2-sysfs.c can handle. ...
2006-06-28[XFS] Fixup whitespace damage in log_write, remove final warning.Nathan Scott
SGI-PV: 904196 SGI-Modid: xfs-linux-melb:xfs-kern:26366a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-27[PATCH] i4l fix DLE masking in isdn_tty_try_readKarsten Keil
DLE masking was non-functional since the new tty handling. Found by Peter Evertz <leo2@pec.homeip.net> Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] do_IRQ() warning fixAndrew Morton
arch/i386/kernel/irq.c: In function 'do_IRQ': arch/i386/kernel/irq.c:104: warning: suggest parentheses around arithmetic in operand of | Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] drivers/message/i2o/iop.c: unexport i2o_msg_nop()Adrian Bunk
It's available in a header as a static inline - there's no need to export it. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] drivers/char/ipmi/ipmi_msghandler.c: make proc_ipmi_root staticAdrian Bunk
Make struct proc_ipmi_root static. Besides this, tremove removes an unused #ifdef CONFIG_PROC_FS from include/linux/ipmi.h. Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] Remove redundant NULL checks before [kv]free - in drivers/Jesper Juhl
Remove redundant NULL chck before kfree + tiny CodingStyle cleanup for drivers/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] Remove redundant NULL checks before [kv]free - in kernel/Jesper Juhl
Remove redundant kfree NULL checks from kernel/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] Remove redundant NULL checks before [kv]free - in fs/Jesper Juhl
Remove redundant NULL checks before kfree for fs/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] futex_requeue() optimizationSebastien Dugue
In futex_requeue(), when the 2 futexes keys hash to the same bucket, there is no need to move the futex_q to the end of the bucket list. Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] rtmutex: Propagate priority settings into PI lock chainsThomas Gleixner
When the priority of a task, which is blocked on a lock, changes we must propagate this change into the PI lock chain. Therefor the chain walk code is changed to get rid of the references to current to avoid false positives in the deadlock detector, as setscheduler might be called by a task which holds the lock on which the task whose priority is changed is blocked. Also add some comments about the get/put_task_struct usage to avoid confusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] rtmutex: Modify rtmutex-tester to test the setscheduler propagationThomas Gleixner
Make test suite setscheduler calls asynchronously. Remove the waits in the test cases and add a new testcase to verify the correctness of the setscheduler priority propagation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 03:19:30 +0000