aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-03-27[PATCH] reduce stack footprint in namespace.cAl Viro
A lot of places misuse struct nameidata when they need struct path. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-27x86: prefetch fix #2Ingo Molnar
Linus noticed a second bug and an uncleanliness: - we'd return on any instruction fetch fault - we'd use both the value of 16 and the PF_INSTR symbol which are the same and make no sense the cleanup nicely unifies this piece of logic. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: xen: fix UP setup of shared_info xen: fix RMW when unmasking events x86, documentation: nmi_watchdog=2 works on x86_64 x86: stricter check in follow_huge_addr() rdc321x: GPIO routines bugfixes x86: ptrace.c: fix defined-but-unused warnings x86: fix prefetch workaround
2008-03-27Merge branch 'avr32-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 * 'avr32-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: avr32: Fix bug in early resource allocation code avr32: Build fix for CONFIG_BUG=n avr32: Work around byteswap bug in gcc < 4.2
2008-03-27xen: fix UP setup of shared_infoJeremy Fitzhardinge
We need to set up the shared_info pointer once we've mapped the real shared_info into its fixmap slot. That needs to happen once the general pagetable setup has been done. Previously, the UP shared_info was set up one in xen_start_kernel, but that was left pointing to the dummy shared info. Unfortunately there's no really good place to do a later setup of the shared_info in UP, so just do it once the pagetable setup has been done. [ Stable: needed in 2.6.24.x ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stable Kernel <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-27xen: fix RMW when unmasking eventsJeremy Fitzhardinge
xen_irq_enable_direct and xen_sysexit were using "andw $0x00ff, XEN_vcpu_info_pending(vcpu)" to unmask events and test for pending ones in one instuction. Unfortunately, the pending flag must be modified with a locked operation since it can be set by another CPU, and the unlocked form of this operation was causing the pending flag to get lost, allowing the processor to return to usermode with pending events and ultimately deadlock. The simple fix would be to make it a locked operation, but that's rather costly and unnecessary. The fix here is to split the mask-clearing and pending-testing into two instructions; the interrupt window between them is of no concern because either way pending or new events will be processed. This should fix lingering bugs in using direct vcpu structure access too. [ Stable: needed in 2.6.24.x ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stable <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-27x86, documentation: nmi_watchdog=2 works on x86_64Marcin Slusarz
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-27x86: stricter check in follow_huge_addr()Christoph Lameter
The first page of the compound page is determined in follow_huge_addr() but then PageCompound() only checks if the page is part of a compound page. PageHead() allows checking if this is indeed the first page of the compound. Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-27rdc321x: GPIO routines bugfixesFlorian Fainelli
This patch fixes the use of GPIO routines which are in the PCI configuration space of the RDC321x, therefore reading/writing to this space without spinlock protection can be problematic. We also now request and free GPIOs and support the MGB100 board, previous code was very AR525W-centric. Signed-off-by: Volker Weiss <volker@tintuc.de> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-27x86: ptrace.c: fix defined-but-unused warningsAndrew Morton
arch/x86/kernel/ptrace.c:548: warning: 'ptrace_bts_get_size' defined but not used arch/x86/kernel/ptrace.c:558: warning: 'ptrace_bts_read_record' defined but not used arch/x86/kernel/ptrace.c:607: warning: 'ptrace_bts_clear' defined but not used arch/x86/kernel/ptrace.c:617: warning: 'ptrace_bts_drain' defined but not used arch/x86/kernel/ptrace.c:720: warning: 'ptrace_bts_config' defined but not used arch/x86/kernel/ptrace.c:788: warning: 'ptrace_bts_status' defined but not used Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-27x86: fix prefetch workaroundIngo Molnar
some early Athlon XP's and Opterons generate bogus faults on prefetch instructions. The workaround for this regressed over .24 - reinstate it. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-27Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: drivers/acpi: elide a non-zero test on a result that is never 0 pnpacpi: reduce printk severity for "pnpacpi: exceeded the max number of ..." cpuidle: fix 100% C0 statistics regression cpuidle: fix cpuidle time and usage overflow ACPI: fix mis-merge -- invoke acpi_unlazy_tlb() only on C3 entry ACPI: fix a regression of ACPI device driver autoloading ACPI: SBS: remove typo from sbchc.c
2008-03-27Give futex init a proper nameBenjamin Herrenschmidt
The futex init function is called init(). This is a pain in the neck when debugging when you code dies in ... init :-) This renames it to futex_init(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-27avr32: Fix bug in early resource allocation codeHaavard Skinnemoen
add_reserved_region() tries to keep the resource list sorted, so when looking for a place to insert the new resource, it may break out before the last entry. When this happens, the list is broken in two because the sibling field of the new entry doesn't point to the next resource. Fix it by updating the new resource's sibling field appropriately. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-03-27ACPI: drivers/acpi: elide a non-zero test on a result that is never 0Julia Lawall
The function thermal_cooling_device_register always returns either a valid pointer or a value made with ERR_PTR, so a test for non-zero on the result will always succeed. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) //<smpl> @a@ expression E, E1; statement S,S1; position p; @@ E = thermal_cooling_device_register(...) ... when != E = E1 if@p (E) S else S1 @n@ position a.p; expression E,E1; statement S,S1; @@ E = NULL ... when != E = E1 if@p (E) S else S1 @depends on !n@ expression E; statement S,S1; position a.p; @@ * if@p (E) S else S1 //</smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-26Merge branches 'release', 'idle', 'redhat-bugzilla-436589', 'sbs' and ↵Len Brown
'video' into release
2008-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (43 commits) [IPSEC]: Fix BEET output [ICMP]: Dst entry leak in icmp_send host re-lookup code (v2). [AX25]: Remove obsolete references to BKL from TODO file. [NET]: Fix multicast device ioctl checks [IRDA]: Store irnet_socket termios properly. [UML]: uml-net: don't set IFF_ALLMULTI in set_multicast_list [VLAN]: Don't copy ALLMULTI/PROMISC flags from underlying device netxen, phy/marvell, skge: minor checkpatch fixes S2io: Handle TX completions on the same CPU as the sender for MIS-X interrupts b44: Truncate PHY address skge napi->poll() locking bug rndis_host: fix oops when query for OID_GEN_PHYSICAL_MEDIUM fails cxgb3: Fix lockdep problems with sge.reg_lock ehea: Fix IPv6 support dm9000: Support promisc and all-multi modes dm9601: configure MAC to drop invalid (crc/length) packets dm9601: add Hirose USB-100 device ID Marvell PHY m88e1111 driver fix netxen: fix rx dropped stats netxen: remove low level tx lock ...
2008-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Define TASK_SIZE_OF() [SPARC64]: flush_ptrace_access() needs preemption disable. [SPARC64]: Update defconfig. [SPARC64]: Fix allnoconfig build, ptrace.c missing CONFIG_COMPAT checks. [SPARC64]: Fix __get_cpu_var in preemption-enabled area. [SPARC64]: Fix sparse warnings in arch/sparc64/kernel/signal.c [SPARC64]: Fix most sparse warnings in arch/sparc64/kernel/sys_sparc.c [SPARC64]: Fix sparse warnings in arch/sparc64/kernel/time.c [SPARC64]: Fix sparse warnings in arch/sparc64/kernel/ptrace.c [SPARC64]: Fix sparse warnings in arch/sparc64/kernel/irq.c [SPARC64]: Fix sparse warnings in arch/sparc64/kernel/iommu.c [SPARC64]: Fix sparse errors in arch/sparc64/kernel/traps.c [SPARC64]: Fix sparse warnings in arch/sparc64/kernel/{cpu,setup}.c [SPARC64]: Adjust {TLBTEMP,TSBMAP}_BASE. [SPARC64]: Make save_stack_trace() more efficient.
2008-03-26[SPARC64]: Define TASK_SIZE_OF()David S. Miller
This make "cat /proc/${PID}/pagemap" more efficient for 32-bit tasks. Based upon a report by Mariusz Kozlowski. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[IPSEC]: Fix BEET outputHerbert Xu
The IPv6 BEET output function is incorrectly including the inner header in the payload to be protected. This causes a crash as the packet doesn't actually have that many bytes for a second header. The IPv4 BEET output on the other hand is broken when it comes to handling an inner IPv6 header since it always assumes an inner IPv4 header. This patch fixes both by making sure that neither BEET output function touches the inner header at all. All access is now done through the protocol-independent cb structure. Two new attributes are added to make this work, the IP header length and the IPv4 option length. They're filled in by the inner mode's output function. Thanks to Joakim Koskela for finding this problem. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: fix performance drop for glx x86: fix trim mtrr not to setup_memory two times x86: GEODE: add missing module.h include x86, cpufreq: fix Speedfreq-SMI call that clobbers ECX x86: fix memoryless node oops during boot x86: add dmi quirk for io_delay x86: convert mtrr/generic.c to kernel-doc x86: Documentation/i386/IO-APIC.txt: fix description
2008-03-26hugetlb: fix potential livelock in return_unused_surplus_hugepages()Nishanth Aravamudan
Running the counters testcase from libhugetlbfs results in on 2.6.25-rc5 and 2.6.25-rc5-mm1: BUG: soft lockup - CPU#3 stuck for 61s! [counters:10531] NIP: c0000000000d1f3c LR: c0000000000d1f2c CTR: c0000000001b5088 REGS: c000005db12cb360 TRAP: 0901 Not tainted (2.6.25-rc5-autokern1) MSR: 8000000000009032 <EE,ME,IR,DR> CR: 48008448 XER: 20000000 TASK = c000005dbf3d6000[10531] 'counters' THREAD: c000005db12c8000 CPU: 3 GPR00: 0000000000000004 c000005db12cb5e0 c000000000879228 0000000000000004 GPR04: 0000000000000010 0000000000000000 0000000000200200 0000000000100100 GPR08: c0000000008aba10 000000000000ffff 0000000000000004 0000000000000000 GPR12: 0000000028000442 c000000000770080 NIP [c0000000000d1f3c] .return_unused_surplus_pages+0x84/0x18c LR [c0000000000d1f2c] .return_unused_surplus_pages+0x74/0x18c Call Trace: [c000005db12cb5e0] [c000005db12cb670] 0xc000005db12cb670 (unreliable) [c000005db12cb670] [c0000000000d24c4] .hugetlb_acct_memory+0x2e0/0x354 [c000005db12cb740] [c0000000001b5048] .truncate_hugepages+0x1d4/0x214 [c000005db12cb890] [c0000000001b50a4] .hugetlbfs_delete_inode+0x1c/0x3c [c000005db12cb920] [c000000000103fd8] .generic_delete_inode+0xf8/0x1c0 [c000005db12cb9b0] [c0000000001b5100] .hugetlbfs_drop_inode+0x3c/0x24c [c000005db12cba50] [c00000000010287c] .iput+0xdc/0xf8 [c000005db12cbad0] [c0000000000fee54] .dentry_iput+0x12c/0x194 [c000005db12cbb60] [c0000000000ff050] .d_kill+0x6c/0xa4 [c000005db12cbbf0] [c0000000000ffb74] .dput+0x18c/0x1b0 [c000005db12cbc70] [c0000000000e9e98] .__fput+0x1a4/0x1e8 [c000005db12cbd10] [c0000000000e61ec] .filp_close+0xb8/0xe0 [c000005db12cbda0] [c0000000000e62d0] .sys_close+0xbc/0x134 [c000005db12cbe30] [c00000000000872c] syscall_exit+0x0/0x40 Instruction dump: ebbe8038 38800010 e8bf0002 3bbd0008 7fa3eb78 38a50001 7ca507b4 4818df25 60000000 38800010 38a00000 7c601b78 <7fa3eb78> 2f800010 409d0008 38000010 This was tracked down to a potential livelock in return_unused_surplus_hugepages(). In the case where we have surplus pages on some node, but no free pages on the same node, we may never break out of the loop. To avoid this livelock, terminate the search if we iterate a number of times equal to the number of online nodes without freeing a page. Thanks to Andy Whitcroft and Adam Litke for helping with debugging and the patch. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-26hugetlb: indicate surplus huge page counts in per-node meminfoNishanth Aravamudan
Currently we show the surplus hugetlb pool state in /proc/meminfo, but not in the per-node meminfo files, even though we track the information on a per-node basis. Printing it there can help track down dynamic pool bugs including the one in the follow-on patch. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-26x86: fix performance drop for glxSuresh Siddha
fix the 3D performance drop reported at: http://bugzilla.kernel.org/show_bug.cgi?id=10328 fb drivers are using ioremap()/ioremap_nocache(), followed by mtrr_add with WC attribute. Recent changes in page attribute code made both ioremap()/ioremap_nocache() mappings as UC (instead of previous UC-). This breaks the graphics performance, as the effective memory type is UC instead of expected WC. The correct way to fix this is to add ioremap_wc() (which uses UC- in the absence of PAT kernel support and WC with PAT) and change all the fb drivers to use this new ioremap_wc() API. We can take this correct and longer route for post 2.6.25. For now, revert back to the UC- behavior for ioremap/ioremap_nocache. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-26x86: fix trim mtrr not to setup_memory two timesYinghai Lu
we could call find_max_pfn() directly instead of setup_memory() to get max_pfn needed for mtrr trimming. otherwise setup_memory() is called two times... that is duplicated... [ mingo@elte.hu: both Thomas and me simulated a double call to setup_bootmem_allocator() and can confirm that it is a real bug which can hang in certain configs. It's not been reported yet but that is probably due to the relatively scarce nature of MTRR-trimming systems. ] Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-26x86: GEODE: add missing module.h includeAndres Salomon
On Wed, 26 Mar 2008 11:56:22 -0600 Jordan Crouse <jordan.crouse@amd.com> wrote: > On 26/03/08 14:31 +0100, Stefan Pfetzing wrote: > > Hello Jordan, > > > > I just tried to build your geodwdt driver for the geode watchdog. Therefore > > I pulled your repository from http://git.infradead.org/geode.git (or more, > > the git url). > > > > I tried to build the geodewdt driver as a module - which didn't work, and > > it failed with the same problem as earlier mentioned on lkmk [1]. I also > > checked the fix [2], but that seems to be already in your (or linus) tree - > > and so I'm unsure what the problem is. > > > > [1] http://kerneltrap.org/mailarchive/linux-kernel/2008/2/17/884074 > > [2] http://kerneltrap.org/mailarchive/linux-kernel/2008/2/17/884174 > > > > Building directly into the kernel seems to work. > > > > Maybe you have some idea? > > Hmm - that is strange. Exporting the symbols should work. I recommend > starting over with a clean tree. > > CCing Andres - any thoughts? > > Jordan > Er, yeah. The patch below should fix it. This should probably go into 2.6.25. Oops, EXPORT_SYMBOL_GPL wasn't being declared due to this header being missing. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-26x86, cpufreq: fix Speedfreq-SMI call that clobbers ECXStephan Diestelhorst
I have found that using SMI to change the cpu's frequency on my DELL Latitude L400 clobbers the ECX register in speedstep_set_state, causing unneccessary retries because the "state" variable has changed silently (GCC assumes it is still present in ECX). play safe and avoid gcc caching any register across IO port accesses that trigger SMIs. Signed-off by: <Stephan.Diestelhorst@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-26x86: fix memoryless node oops during bootYinghai Lu
fix oops during boot reported in this thread: http://lkml.org/lkml/2008/2/6/65 enable booting on memoryless nodes. Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-26x86: add dmi quirk for io_delayIngo Molnar
reported by mereandor@gmail.com, in: http://bugzilla.kernel.org/show_bug.cgi?id=6307 Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-26x86: convert mtrr/generic.c to kernel-docRandy Dunlap
Convert function comment blocks to kernel-doc notation. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-26x86: Documentation/i386/IO-APIC.txt: fix descriptionNick Andrew
The description of the interrupt routing doesn't match the (nice) diagram. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-26kprobes: MAINTAINERS updateMasami Hiramatsu
Add Masami Hiramatsu to kprobes maintainers Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-26Merge branch 'slab-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm * 'slab-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm: slab: fix cache_cache bootstrap in kmem_cache_init() count_partial() is not used if !SLUB_DEBUG and !CONFIG_SLABINFO
2008-03-26Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt: NOHZ: reevaluate idle sleep length after add_timer_on() clocksource: revert: use init_timer_deferrable for clocksource_watchdog
2008-03-26Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: relay: set an spd_release() hook for splice set relay file can not be read by pread(2)
2008-03-26SVCRDMA: Check num_sge when setting LAST_CTXT bitTom Tucker
The RDMACTXT_F_LAST_CTXT bit was getting set incorrectly when the last chunk in the read-list spanned multiple pages. This resulted in a kernel panic when the wrong context was used to build the RPC iovec page list. RDMA_READ is used to fetch RPC data from the client for NFS_WRITE requests. A scatter-gather is used to map the advertised client side buffer to the server-side iovec and associated page list. WR contexts are used to convey which scatter-gather entries are handled by each WR. When the write data is large, a single RPC may require multiple RDMA_READ requests so the contexts for a single RPC are chained together in a linked list. The last context in this list is marked with a bit RDMACTXT_F_LAST_CTXT so that when this WR completes, the CQ handler code can enqueue the RPC for processing. The code in rdma_read_xdr was setting this bit on the last two contexts on this list when the last read-list chunk spanned multiple pages. This caused the svc_rdma_recvfrom logic to incorrectly build the RPC and caused the kernel to crash because the second-to-last context doesn't contain the iovec page list. Modified the condition that sets this bit so that it correctly detects the last context for the RPC. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Tested-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-26Revert "PCI: remove transparent bridge sizing"Linus Torvalds
This reverts commit 8fa5913d54f3b1e09948e6a0db34da887e05ff1f, which caused various interesting problems for people, including wrong resource allocations. See for example bugzilla entry "2.6.25-rc2: ohci1394 problem (MMIO broken)" at http://bugzilla.kernel.org/show_bug.cgi?id=10080 And Gary Hade says: "The same change had also exposed an issue reported by Paul Martin that has been causing an Oops while hotplugging ThinkPads to a ThinkPad Dock II. See http://lkml.org/lkml/2008/2/19/405 http://bugzilla.kernel.org/show_bug.cgi?id=9961 I have a fix for the ThinkPad docking Oops but if the issue being discussed here is caused by the transparent bridge sizing removal change I totally agree that it should be reverted." The transparent bridge sizing removal change was motivated by insufficient PCI memory resource for a transparent bridge window that was being created as a result of expansion ROM(s) being included in the transparent bridge sizing calculations. A later "PCI: Remove default PCI expansion ROM memory allocation" change ( re: http://lkml.org/lkml/2007/12/11/361 ) removes the expansion ROM(s) from the transparent bridge sizing calculations which actually resolves the original issue in a different manner. So, even if the "PCI: remove transparent bridge sizing" is not problematic it is no longer needed anyway." Identified-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Tested-by: Thomas Meyer <thomas@m3y3r.de> Acked-by: Gary Hade <garyhade@us.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-26pnpacpi: reduce printk severity for "pnpacpi: exceeded the max number of ..."Len Brown
We have been printing these messages at KERN_ERR since 2.6.24, per http://bugzilla.kernel.org/show_bug.cgi?id=9535 But KERN_ERR pops up on a console booted with "quiet" and causes users to get alarmed and file bugs about the message itself: https://bugzilla.redhat.com/show_bug.cgi?id=436589 So reduce the severity of these messages to KERN_WARNING, which is not printed by "quiet". This message will still be seen without "quiet", but a lot of messages are printed in that mode and it will be less likely to cause undue alarm. We could go all the way to KERN_DEBUG, but this is a real warning after all, so it seems prudent not to require "debug" to see it. Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-26slab: fix cache_cache bootstrap in kmem_cache_init()Daniel Yeisley
Commit 556a169dab38b5100df6f4a45b655dddd3db94c1 ("slab: fix bootstrap on memoryless node") introduced bootstrap-time cache_cache list3s for all nodes but forgot that initkmem_list3 needs to be accessed by [somevalue + node]. This patch fixes list_add() corruption in mm/slab.c seen on the ES7000. Cc: Mel Gorman <mel@csn.ul.ie> Cc: Olaf Hering <olaf@aepfle.de> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Dan Yeisley <dan.yeisley@unisys.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-26count_partial() is not used if !SLUB_DEBUG and !CONFIG_SLABINFOChristoph Lameter
Avoid warnings about unused functions if neither SLUB_DEBUG nor CONFIG_SLABINFO is defined. This patch will be reversed when slab defrag is merged since slab defrag requires count_partial() to determine the fragmentation status of slab caches. Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-26[SPARC64]: flush_ptrace_access() needs preemption disable.David S. Miller
Based upon a report by Mariusz Kozlowski. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[SPARC64]: Update defconfig.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[SPARC64]: Fix allnoconfig build, ptrace.c missing CONFIG_COMPAT checks.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[SPARC64]: Fix __get_cpu_var in preemption-enabled area.David S. Miller
Reported by Mariusz Kozlowski. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26relay: set an spd_release() hook for spliceJens Axboe
relay doesn't reference the pages it adds, however we need a non-NULL hook or splice_to_pipe() can oops. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-26set relay file can not be read by pread(2)Lai Jiangshan
I found that relay files can be read by pread(2). I fix it, for relay files are not capable of seeking. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-26[ICMP]: Dst entry leak in icmp_send host re-lookup code (v2).Pavel Emelyanov
Commit 8b7817f3a959ed99d7443afc12f78a7e1fcc2063 ([IPSEC]: Add ICMP host relookup support) introduced some dst leaks on error paths: the rt pointer can be forgotten to be put. Fix it bu going to a proper label. Found after net namespace's lo refused to unregister :) Many thanks to Den for valuable help during debugging. Herbert pointed out, that xfrm_lookup() will put the rtable in case of error itself, so the first goto fix is redundant. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[AX25]: Remove obsolete references to BKL from TODO file.Robert P. J. Day
Given that there are no apparent calls to lock_kernel() or unlock_kernel() under net/ax25, delete the TODO reference related to that. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[NET]: Fix multicast device ioctl checksPatrick McHardy
SIOCADDMULTI/SIOCDELMULTI check whether the driver has a set_multicast_list method to determine whether it supports multicast. Drivers implementing secondary unicast support use set_rx_mode however. Check for both dev->set_multicast_mode and dev->set_rx_mode to determine multicast capabilities. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 08:13:57 +0000