aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-01-12orinoco: take the driver lock in the rx taskletDavid Kilroy
Fix the warning reproduced below. We add to rx_list in interrupt context and remove elements in tasklet context. While removing elements we need to prevent the interrupt modifying the list. Note that "orinoco: Process bulk of receive interrupt in a tasklet" did not preserve locking semantics on what is now orinoco_rx. This patch reinstates the locking semantics and ensures it covers rx_list as well. This leads to additional cleanup required in free_orinocodev. [89479.105038] WARNING: at lib/list_debug.c:30 __list_add+0x8f/0xa0() [89479.105058] list_add corruption. prev->next should be next (dddb3568), but was cbc28978. (prev=dddb3568). [89479.106002] Pid: 15746, comm: X Not tainted 2.6.28-1avb #26 [89479.106020] Call Trace: [89479.106062] [<c011d3b0>] warn_slowpath+0x60/0x80 [89479.106104] [<c01073d0>] ? native_sched_clock+0x20/0x70 [89479.106194] [<c013d825>] ? lock_release_holdtime+0x35/0x200 [89479.106218] [<c018d9f0>] ? __slab_alloc+0x550/0x560 [89479.106254] [<c02f9c9d>] ? _spin_unlock+0x1d/0x20 [89479.106270] [<c018d9f0>] ? __slab_alloc+0x550/0x560 [89479.106302] [<c01ff2a7>] ? delay_tsc+0x17/0x24 [89479.106319] [<c01ff221>] ? __const_udelay+0x21/0x30 [89479.106376] [<dfa8b1e2>] ? hermes_bap_seek+0x112/0x1e0 [hermes] [89479.106396] [<c013d7eb>] ? trace_hardirqs_off+0xb/0x10 [89479.106418] [<c018e307>] ? __kmalloc_track_caller+0xb7/0x110 [89479.106448] [<c028eefc>] ? dev_alloc_skb+0x1c/0x30 [89479.106465] [<c028eefc>] ? dev_alloc_skb+0x1c/0x30 [89479.106482] [<c020e13f>] __list_add+0x8f/0xa0 [89479.106551] [<dfd0fcae>] orinoco_interrupt+0xcae/0x16c0 [orinoco] [89479.106574] [<c013b0e3>] ? tick_dev_program_event+0x33/0xb0 [89479.106594] [<c01073d0>] ? native_sched_clock+0x20/0x70 [89479.106613] [<c013d825>] ? lock_release_holdtime+0x35/0x200 [89479.106662] [<c013d7eb>] ? trace_hardirqs_off+0xb/0x10 [89479.106892] [<dfe7faa7>] ? usb_hcd_irq+0x97/0xa0 [usbcore] [89479.106926] [<c015ba79>] handle_IRQ_event+0x29/0x60 [89479.106947] [<c015cf89>] handle_level_irq+0x69/0xe0 [89479.106963] [<c015cf20>] ? handle_level_irq+0x0/0xe0 [89479.106977] <IRQ> [<c02ca933>] ? tcp_v4_rcv+0x633/0x6e0 [89479.107025] [<c0103f0c>] ? common_interrupt+0x28/0x30 [89479.107057] [<c02a0000>] ? sk_run_filter+0x320/0x7a0 [89479.107078] [<c020e041>] ? list_del+0x21/0x90 [89479.107106] [<dfd0d24e>] ? orinoco_rx_isr_tasklet+0x2ce/0x480 [orinoco] [89479.107131] [<c01402e0>] ? __lock_acquire+0x160/0x1650 [89479.107151] [<c01073d0>] ? native_sched_clock+0x20/0x70 [89479.107169] [<c013d825>] ? lock_release_holdtime+0x35/0x200 [89479.107200] [<c012249a>] ? irq_enter+0xa/0x60 [89479.107217] [<c0104e52>] ? do_IRQ+0xd2/0x130 [89479.107518] [<c010342c>] ? restore_nocheck_notrace+0x0/0xe [89479.107542] [<c0122830>] ? __do_softirq+0x0/0x110 [89479.107561] [<c013f7b4>] ? trace_hardirqs_on_caller+0x74/0x140 [89479.107583] [<c01ff678>] ? trace_hardirqs_on_thunk+0xc/0x10 [89479.107602] [<c0122087>] ? tasklet_action+0x27/0x90 [89479.107620] [<c013f7b4>] ? trace_hardirqs_on_caller+0x74/0x140 [89479.107638] [<c01220a3>] ? tasklet_action+0x43/0x90 [89479.107655] [<c012289f>] ? __do_softirq+0x6f/0x110 [89479.107674] [<c0122830>] ? __do_softirq+0x0/0x110 [89479.107685] <IRQ> [<c015cf20>] ? handle_level_irq+0x0/0xe0 [89479.107715] [<c012246d>] ? irq_exit+0x5d/0x80 [89479.107732] [<c0104e52>] ? do_IRQ+0xd2/0x130 [89479.107747] [<c0103337>] ? sysenter_exit+0xf/0x16 [89479.107765] [<c013f83d>] ? trace_hardirqs_on_caller+0xfd/0x140 [89479.107782] [<c0103f0c>] ? common_interrupt+0x28/0x30 [89479.107797] ---[ end trace a1fc0a52df4a729d ]--- Reported-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12ath9k: Enforce module build if rfkill is a moduleJouni Malinen
CONFIG_ATH9K=y results in build issues if CONFIG_RFKILL=m since ath9k does not depend on rfkill in kconfig (i.e., CONFIG_RFKILL is used to select whether to enable rfkill in ath9k), but uses its functions if rfkill is enabled. Enforce ath9k to be build as a module if CONFIG_RFKILL=m to avoid this invalid configuration. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12p54usb: Add USB ID for Thomson Speedtouch 121gMichiel
Add the USB ID for Thomson Speedtouch 121g to p54usb. Signed-off-by: Michiel <michiel@ettema.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12rt2x00: Fix TX short preamble detectionIvo van Doorn
The short preamble mode was not correctly detected during TX, rt2x00 used the rate->hw_value_short field but mac80211 is not using this field that way. Instead the flag IEEE80211_TX_RC_USE_SHORT_PREAMBLE should be used to determine if the frame should be send out using short preamble or not. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12rt2x00: add USB ID for the Linksys WUSB200.Stefan Lippers-Hollmann
add USB ID for the Linksys WUSB200 Wireless-G Business USB Adapter to rt73usb. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12p54usb: Fix to prevent SKB memory allocation errors with 4K page sizeLarry Finger
On x86_64 architecture with 4K page size and SLUB debugging enabled, stress testing on p54usb has resulted in skb allocation failures of O(1) and extreme page fragmentation. Reducing rx_mtu fixes this problem by reducing the size of all receive skb allocations to be of O(0). This change does not impact performance in any way. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12rt2x00: Fix radio LED type checkAndrew Price
Since "rt2x00: Fix LED state handling", rt2x00leds_led_radio wrongly checks that the LED type is LED_TYPE_ASSOC. This patch makes it check for LED_TYPE_RADIO once again. Signed-off-by: Andrew Price <andy@andrewprice.me.uk> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12Wireless: Fix Kconfig fact errorErik Ekman
Raytheon cards use 2.4 GHz, not 2.4 MHz. See http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Linux.Wireless.drivers.html#Raylink Signed-off-by: Erik Ekman <erik@kryo.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-11ucc_geth: use correct UCCE macrosTimur Tabi
The UCC Event Register (UCCE) already has unambigous macro definitions in qe.h, so we should not be defining our own in the UCC Ethernet driver. Removed unused local variable 'dev' from ucc_geth_poll(), which fixes a warning caused by commit 908a7a16b852ffd618a9127be8d62432182d81b4 ("net: Remove unused netdev arg from some NAPI interfaces."). Replaced in_be/out_be pairs with setbits32 or clrbits32, where applicable. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11net_dma: acquire/release dma channels on ifup/ifdownDan Williams
The recent dmaengine rework removed the capability to remove dma device driver modules while net_dma is active. Rather than notify dmaengine-clients that channels are trying to be removed, we now rely on clients to notify dmaengine when they no longer have a need for channels. Teach net_dma to release channels by taking dmaengine references at netdevice open and dropping references at netdevice close. Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11cxgb3: Keep LRO off if disabled when interface is downRoland Dreier
I have a system with a Chelsio adapter (driven by cxgb3) whose ports are part of a Linux bridge. Recently I updated the kernel and discovered that things stopped working because cxgb3 was doing LRO on packets that were passed into the bridge code for forwarding. (Incidentally, this problem manifested itself in a strange way that made debugging a bit interesting -- for some reason, the skb_warn_if_lro() check in bridge didn't trigger and these LROed packets were forwarded out a forcedeth interface, and caused the forcedeth transmit path to get stuck) This is because cxgb3 has no way of keeping state for the LRO flag until the interface is brought up, so if the bridging code disables LRO while the interface is down, then cxgb3_up() will just reenable LRO, and on my Debian system at least, the init scripts add interfaces to a bridge before bringing the interfaces up. Fix this by keeping track of each interface's LRO state in cxgb3 so that when bridge disables LRO, it stays disabled in cxgb3_up() when the interface is brought up. I did this by changing the rx_csum_offload flag into a pair of bit flags; the effect of this on the rx_eth() fast path is miniscule enough that it should be fine (eg on x86, a cmpb instruction becomes a testb instruction). Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11sfc: SFT9001: Fix condition for LNPGA power-offBen Hutchings
Only the SFX7101 requires software power control. This was incorrectly being applied to the SFT9001 rev A as well. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11dccp ccid-3: Fix RFC referenceGerrit Renker
Thanks to Wei and Arnaldo for pointing out the correct new reference for CCID-3. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11smsc911x: register irq with device name, not driver nameSteve Glendinning
This change lets "cat /proc/interrupts" show the name of the ethernet device (e.g. eth0) rather than the driver name (smsc911x). Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11smsc911x: fix smsc911x_reg_read compiler warningSteve Glendinning
if this code path is ever hit, the platform_data struct isn't properly configured with a bus width flag so the device won't work (hence the BUG()). This patch adds a dummy return statement to eliminate this compiler warning: drivers/net/smsc911x.c: In function 'smsc911x_reg_read': drivers/net/smsc911x.c:148: warning: control reaches end of non-void function Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11forcedeth: napi schedule lock fixAyaz Abdulla
This patch fixes a potential race condition between scheduling napi and completing napi poll. The call to netif_rx_schedule should be under protection of the lock (as is the completion), otherwise, interrupts could be masked off. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11net: fix section mismatch warnings in dccp/ccids/lib/tfrc.cLeonardo Potenza
Removed the __exit annotation of tfrc_lib_exit(), in order to suppress the following section mismatch messages: WARNING: net/dccp/dccp.o(.text+0xd9): Section mismatch in reference from the function ccid_cleanup_builtins() to the function .exit.text:tfrc_lib_exit() The function ccid_cleanup_builtins() references a function in an exit section. Often the function tfrc_lib_exit() has valid usage outside the exit section and the fix is to remove the __exit annotation of tfrc_lib_exit. WARNING: net/dccp/dccp.o(.init.text+0x48): Section mismatch in reference from the function ccid_initialize_builtins() to the function .exit.text:tfrc_lib_exit() The function __init ccid_initialize_builtins() references a function __exit tfrc_lib_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __exit annotation of tfrc_lib_exit() so it may be used outside an exit section. Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11forcedeth: remove mgmt unit for mcp79 chipsetAyaz Abdulla
This patch removes the feature flag for mgmt unit as it is not used for this chipset. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11qlge: Remove dynamic alloc of rx ring control blocks.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11qlge: Fix schedule while atomic issue.Ron Mercer
There is no need to sleep while waiting for the hardware semaphore to become available. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11qlge: Remove support for device ID 8000.Ron Mercer
Support for dev id 8000 is pushed out until 2.6.30. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11qlge: Get rid of split addresses in hardware control blocks.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11qlge: Get rid of volatile usage for shadow register.Ron Mercer
Putting back ql_read_sh_reg() function and using rmb() instead of volatile. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11forcedeth: version bump and copyrightAyaz Abdulla
This patch bumps up the version number and adds current year to copyright. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11forcedeth: xmit lock fixAyaz Abdulla
This patch fixes a potential race condition between xmit thread and xmit completion thread. The calculation of empty tx descriptors is not performed under the lock. This could cause it to set the stop flag while the completion thread finishes all tx's. This will result in the tx queue in stopped state and no one to wake it up. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11netdev: missing validate_address hooksStephen Hemminger
Some devices were converted incorrectly and are missing the validate address hooks. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11netdev: add missing set_mac_address hookStephen Hemminger
Many drivers lost the ability to set ethernet address accidently during the net_device_ops conversion. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11netdev: gianfar: add MII ioctl handlerClifford Wolf
This is the same kind of wrapper that can also be found in many other network device drivers. Tested with a freescale MPC8349E host CPU: Toggled the interface LEDs on a DP83865 PHY. Signed-off-by: Clifford Wolf <clifford@clifford.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11drivers/net/wireless/libertas: move a dereference below a NULL testJulia Lawall
In each case, if the NULL test is necessary, then the dereference should be moved below the NULL test. I have also taken advantage of the availability of the value of priv->dev in the subsequent calls to netif_stop_queue and netif_carrier_off. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11drivers/net/hamradio/6pack.c: move a dereference below a NULL testJulia Lawall
In each case, if the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11drivers/isdn/hardware/mISDN: move a dereference below a NULL testJulia Lawall
In each case, if the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11net/bridge/netfilter: move a dereference below a NULL testJulia Lawall
In each case, if the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11net/tipc/bcast.h: use ARRAY_SIZEJulia Lawall
ARRAY_SIZE is more concise to use when the size of an array is divided by the size of its type or the size of its first element. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @i@ @@ #include <linux/kernel.h> @depends on i using "paren.iso"@ type T; T[] E; @@ - (sizeof(E)/sizeof(T)) + ARRAY_SIZE(E) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11wimax: fix typo in kernel-doc for debugfs_dentry in struct wimax_devInaky Perez-Gonzalez
The kernel-doc was referring to member @debufs_dentry instead of @debugfs_dentry. Reported by Randy Dunlap http://marc.info/?l=linux-netdev&m=123147942302885&w=2 As well, escape the colon in the field's text description, as it is causing the generated text to be erraticly broken up (with paragraphs moved down). Could not find a reason why it is happening so, even when other field descriptions use colons and work as expected. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-113c59x: Use device_set_wakeup_enableSteffen Klassert
Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set this bit by calling device_set_wakeup_enable(). This restores proper WOL for the 3c59x driver. Reported-and-tested-by: Graeme Wilford <gwilford@gmail.com> Reported-by: Gunnar Degnbol <degnbol@danbbs.dk> Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11qeth: fix usage of netdev_opsFrank Blaschka
Have separate netdev_ops for OSA and HiperSocket/TR. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11qlge: Naming interrupt vectorsJesper Dangaard Brouer
Name interrupt vectors according to the new naming standard, by Robert Olsson and DaveM. The qlge driver were very close to the new standard, thus the change is kind of trivial. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11b44: fix misalignment and wasted space in rx handlingFelix Fietkau
Broadcom 4400 puts a header of configurable size (apparently needs to be at least 28 bytes) in front of received packets. When handling this, the previous code accidentally added the offset 30 *twice* for the software and once for the hardware, thereby cancelling out the IP alignment effect of the 30 byte padding and wasting an additional 30 bytes of memory per packet. This patch fixes this problem and improves routing throughput by about 30% on MIPS, where unaligned access is expensive. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11ipcomp: Remove spurious truesize increaseHerbert Xu
When I made ipcomp use frags, I forgot to take out the original truesize update that was added for pskb_expand_head. As we no longer expand the head of skb, that update should have been removed. This bug is not related to the truesize warnings since we only made it bigger than what it should've been. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11e1000e: Add process name to WARN message when detecting Mutex contentionDavid Graham
Adds process name of the current mutex holder to the WARN message output when the e1000e driver attempts to acquire the nvm_mutex and finds that it is already being held. With this patch the WARN message indicates both the process name of the current mutex holder and the process name of the attempted acquisition, which together will help to identify the contending codepaths. Signed-off-by: David Graham <david.graham@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11r6040: bump release to 0.21Florian Fainelli
Bump version to 0.21 and release date to 09Jan2009. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11r6040: no longer mark r6040 as being experimentalFlorian Fainelli
We do not depend on EXPERIMENTAL and the driver is not experimental, so remove this warning. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11r6040: generate random ethernet MAC address when not initializedFlorian Fainelli
This patch makes the ethernet driver assign a random ethernet MAC address when the bootloader does not set it. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11r6040: fix ifconfig down and freeing of tx/rx descriptorsFlorian Fainelli
This patch fixes warnings and such traces that appear when doing an ifconfig down on the interface: WARNING: at arch/x86/kernel/pci-dma.c:376 dma_free_coherent+0x40/0x7d() Modules linked in: Signed-off-by: Joe Chou <joe.chou@rdc.com.tw> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11irda: fix incomplete conversation to internal statsAlexander Beregalov
Fix for commit af0490810c (irda: convert to internal stats) Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-10Linux 2.6.29-rc1Linus Torvalds
2009-01-10bootgraph: make the bootgraph script show async waiting timeArjan van de Ven
It is useful for diagnosing boot performance to see where async function calls are waiting on serialization... this patch adds this functionality to the bootgraph.pl script. The waiting time is shown as a half transparent, gray bar through the block that is waiting. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10libata: only ports >= 0 need to synchronizeArjan van de Ven
In a discussio with Jeff Garzik, he mentioned that the serialization for the libata port probes only needs to be within the domain of a host. This means that for the first port of each host (with ID 0), we don't need to wait, so we can relax our serialization a little. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10libata: Add a per-host flag to opt-in into parallel port probesArjan van de Ven
This patch adds a per host flag that allows drivers to opt in into having its busses scanned in parallel. Drivers that do not set this flag get their ports scanned in the "original" sequence. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (36 commits) x86: fix section mismatch warnings in mcheck/mce_amd_64.c x86: offer frame pointers in all build modes x86: remove duplicated #include's x86: k8 numa register active regions later x86: update Alan Cox's email addresses x86: rename all fields of mpc_table mpc_X to X x86: rename all fields of mpc_oemtable oem_X to X x86: rename all fields of mpc_bus mpc_X to X x86: rename all fields of mpc_cpu mpc_X to X x86: rename all fields of mpc_intsrc mpc_X to X x86: rename all fields of mpc_lintsrc mpc_X to X x86: rename all fields of mpc_iopic mpc_X to X x86: irqinit_64.c init_ISA_irqs should be static Documentation/x86/boot.txt: payload length was changed to payload_length x86: setup_percpu.c fix style problems x86: irqinit_64.c fix style problems x86: irqinit_32.c fix style problems x86: i8259.c fix style problems x86: irq_32.c fix style problems x86: ioport.c fix style problems ...