aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-12-16[AX25]: Locking dependencies fix in ax25_disconnect().Jarek Poplawski
Bernard Pidoux reported these lockdep warnings: [ INFO: possible irq lock inversion dependency detected ] 2.6.23.1 #1 --------------------------------------------------------- fpac/4933 just changed the state of lock: (slock-AF_AX25){--..}, at: [<d8be3312>] ax25_disconnect+0x46/0xaf [ax25] but this lock was taken by another, soft-irq-safe lock in the past: (ax25_list_lock){-+..} and interrupts could create inverse lock ordering between them. [...] [ INFO: inconsistent lock state ] 2.6.23.1 #1 --------------------------------- inconsistent {in-softirq-W} -> {softirq-on-W} usage. ax25_call/4005 [HC0[0]:SC0[0]:HE1:SE1] takes: (slock-AF_AX25){-+..}, at: [<d8b79312>] ax25_disconnect+0x46/0xaf [ax25] [...] This means slock-AF_AX25 could be taken both from softirq and process context with softirqs enabled, so it's endangered itself, but also makes ax25_list_lock vulnerable. It was not 100% verified if the real lockup can happen, but this fix isn't very costly and looks safe anyway. (It was tested by Bernard with 2.6.23.9 and 2.6.24-rc5 kernels.) Reported_by: Bernard Pidoux <pidoux@ccr.jussieu.fr> Tested_by: Bernard Pidoux <pidoux@ccr.jussieu.fr> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-16[IPV4]: Make tcp_input_metrics() get minimum RTO via tcp_rto_min()Satoru SATOH
tcp_input_metrics() refers to the built-time constant TCP_RTO_MIN regardless of configured minimum RTO with iproute2. Signed-off-by: Satoru SATOH <satoru.satoh@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-16[IPV6]: Fix the return value of ipv6_getsockoptWei Yongjun
If CONFIG_NETFILTER if not selected when compile the kernel source code, ipv6_getsockopt will returen an EINVAL error if optname is not supported by the kernel. But if CONFIG_NETFILTER is selected, ENOPROTOOPT error will be return. This patch fix to always return ENOPROTOOPT error if optname argument of ipv6_getsockopt is not supported by the kernel. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-16[BRIDGE]: Assign random address.Stephen Hemminger
Assigning a valid random address to bridge device solves problems when bridge device is brought up before adding real device to bridge. When the first real device is added to the bridge, it's address will overide the bridges random address. Note: any device added to a bridge must already have a valid ethernet address. br_add_if -> br_fdb_insert -> fdb_insert -> is_valid_ether_addr Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-14[IPV4]: Updates to nfsroot documentationAmos Waterland
The difference between ip=off and ip=::::::off has been a cause of much confusion. Document how each behaves, and do not contradict ourselves by saying that "off" is the default when in fact "any" is the default and is descibed as being so lower in the file. Signed-off-by: Amos Waterland <apw@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-14[ATM]: Fix compiler warning noise with FORE200E driverTom "spot" Callaway
gcc throws these warnings with: CONFIG_ATM_FORE200E=m # CONFIG_ATM_FORE200E_PCA is not set drivers/atm/fore200e.c:2695: warning: 'fore200e_pca_detect' defined but not used drivers/atm/fore200e.c:2748: warning: 'fore200e_pca_remove_one' defined but not used By moving the #ifdef CONFIG_ATM_FORE200E_PCA around those two functions, the compiler warnings are silenced. Signed-off-by: Tom "spot" Callaway <tcallawa@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-14[NETFILTER]: bridge: fix missing link layer headers on outgoing routed packetsPatrick McHardy
As reported by Damien Thebault, the double POSTROUTING hook invocation fix caused outgoing packets routed between two bridges to appear without a link-layer header. The reason for this is that we're skipping the br_nf_post_routing hook for routed packets now and don't save the original link layer header, but nevertheless tries to restore it on output, causing corruption. The root cause for this is that skb->nf_bridge has no clearly defined lifetime and is used to indicate all kind of things, but that is quite complicated to fix. For now simply don't touch these packets and handle them like packets from any other device. Tested-by: Damien Thebault <damien.thebault@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-14[SYNCPPP]: Endianness and 64bit fixes.Al Viro
* trivial annotations * long != 32bit, use __be32 * wrong endianness in sending CISCO_ADDR_REPLY Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-14[TIPC]: Fix semaphore handling.Andrew Morton
As noted by Kevin, tipc's release() does down_interruptible() and ignores the return value. So if signal_pending() we'll end up doing up() on a non-downed semaphore. Fix. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-14[NETFILTER]: xt_hashlimit should use time_after_eq()Eric Dumazet
In order to avoid jiffies wraparound and its effect, special care must be taken when doing comparisons ... Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-14[XFRM]: Display the audited SPI value in host byte order.Paul Moore
Currently the IPsec protocol SPI values are written to the audit log in network byte order which is different from almost all other values which are recorded in host byte order. This patch corrects this inconsistency by writing the SPI values to the audit record in host byte order. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-14[NETFILTER]: ip_tables: fix compat copy racePatrick McHardy
When copying entries to user, the kernel makes two passes through the data, first copying all the entries, then fixing up names and counters. On the second pass it copies the kernel and match data from userspace to the kernel again to find the corresponding structures, expecting that kernel pointers contained in the data are still valid. This is obviously broken, fix by avoiding the second pass completely and fixing names and counters while dumping the ruleset, using the kernel-internal data structures. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-14[NETFILTER]: ctnetlink: set expected bit for related conntracksPablo Neira Ayuso
This patch is a fix. It sets IPS_EXPECTED for related conntracks. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix endless loop in cheetah_xcall_deliver(). [SERIAL] sparc: Infrastructure to fix section mismatch bugs.
2007-12-12Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c/isp1301_omap: Build fix i2c: Add missing spaces in split log messages i2c-gpio: Initialize adapter class i2c: Delete an outdated piece of documentation
2007-12-12[SPARC64]: Fix endless loop in cheetah_xcall_deliver().David S. Miller
We need to mask out the proper bits when testing the dispatch status register else we can see unrelated NACK bits from previous cross call sends. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-12[SERIAL] sparc: Infrastructure to fix section mismatch bugs.Martin Habets
This patch against 2.6.23 sparc-2.6.git contains a number of minor cleanups of the sparc serial drivers. Initially I fixed this build warning: WARNING: vmlinux.o(.text+0x107a2c): Section mismatch: reference to .init.text:add_preferred_console (between 'sunserial_console_match' and 'sunserial_console_termios') which is done by declaring sunserial_console_match() as __init. This resulted in build warnings on sunserial_current_minor. To resolve these the variable was changed so it is no longer global, and to hide operations on it inside 2 new functions. These functions handle the UART minor handling code that is common to all sparc serial drivers. These changes allowed to clean up the uart counters in all the sparc serial drivers, and the administration of minor device numbers. Lastly, sunserial_console_termios() does not need to be exported since it is only called from non-modular code. Sadly, the following build warning still exists: WARNING: vmlinux.o(__ksymtab+0x2910): Section mismatch: reference to .init.text:sunserial_console_match (between '__ksymtab_sunserial_console_match' and '__ksymtab_sunserial_unregister_minors') This could be resolved by not exporting sunserial_console_match(), but this is not possible at the moment because it is being called from modular code. On the other hand, this is a bogus warning since it comes from a ksymtab section. Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-12i2c/isp1301_omap: Build fixDavid Brownell
Build fix to the isp1301_omap driver ... this driver gets built more often in the OMAP tree than in mainline, partly because the defconfig for H2 (plus probably H3 and H4) needs updating. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-12-12i2c: Add missing spaces in split log messagesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-12-12i2c-gpio: Initialize adapter classAtsushi Nemoto
This is required to let hwmon drivers attach to the adapter. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-12-12i2c: Delete an outdated piece of documentationJean Delvare
I'm amazed that this old piece of documentation managed to survive until today. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-12-12V4L/DVB (6609): Re-adds lock safe videobuf_read_startMauro Carvalho Chehab
videobuf_dvb needs videobuf_read_start. The EXPORT_SYMBOL_GPL() were removed by a previous patch. However, videobuf_dvb needs this. This patch re-adds videobuf_read_start, doing the proper lock. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11Revert "make bnx2x select ZLIB_INFLATE"Linus Torvalds
This reverts commit 70eba18b5664f90d7620905e005b89388e5fd94b, as per Jeff Garzik: "That was meant for 2.6.25, and actually (due to patching) applied to a completely unrelated 2.6.24 net driver." Noted-by: Roland Dreier <rdreier@cisco.com> Requested-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-11V4L/DVB (6797): bt8xx/ section fixesAdrian Bunk
This patch fixes the following section mismatch with CONFIG_HOTPLUG=n: <-- snip --> ... ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6796): ivtv/ section fixAdrian Bunk
This patch fixes the following section mismatch with CONFIG_HOTPLUG=n: <-- snip --> ... ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6794): Fix compilation when dib3000mc is compiled as a moduleMauro Carvalho Chehab
As reported by Andrew Morton: > ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined! > ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined! > ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko] undefined! > ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko] undefined! > ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-a800.ko] undefined! > ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-a800.ko] undefined Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6733): DVB: Compile 3000MC-specific DIB code only for ↵Jiri Kosina
CONFIG_DVB_DIB3000MC On Tue, 4 Dec 2007, Ingo Molnar wrote: > drivers/built-in.o: In function `dibusb_dib3000mc_tuner_attach': > : undefined reference to `dib3000mc_get_tuner_i2c_master' > drivers/built-in.o: In function `dibusb_dib3000mc_tuner_attach': > : undefined reference to `dib3000mc_set_config' Seems like -common part contains also code that is not completely common to all the modules. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6750): Fix in-kernel compilation for cxusbMauro Carvalho Chehab
cxusb needs tuner-xc2028*.h files, but Makefile is not adding its patch drivers/media/dvb/dvb-usb/cxusb.c:33:26: error: tuner-xc2028.h: File not found drivers/media/dvb/dvb-usb/cxusb.c:34:32: error: tuner-xc2028-types.h: File not found Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6746): saa7134-dvb: fix tuning for WinTV HVR-1110Benoit Istin
There are several months my hvr1110 stop working. This is very simple to fix, for my card revision at least, by setting a missing field to the hauppauge_hvr_1110_config. Signed-off-by: Benoit Istin <beistin@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6751): V4L: Memory leak! Fix count in videobuf-vmalloc mmapBrandon Philips
This is pretty serious bug. map->count is never initialized after the call to kmalloc making the count start at some random trash value. The end result is leaking videobufs. Also, fix up the debug statements to print unsigned values. Pushed to http://ifup.org/hg/v4l-dvb too Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6690): saa7134: fix ignored interruptsHeikki Lindholm
The saa7134 video driver starts dropping frames when used together with the saa7134-alsa driver. Frames are dropped because when an audio event is waiting the driver simply ignores the interrupt and passes it on to the saa7134-alsa interrupt handler. The alsa interrupt handler in turn acknowledges all types of events thus clearing the pending video events as well. Fix by only masking out the audio event in the video interrupt handler and by only acknowledging the audio event in the alsa driver. Signed-off-by: Heikki Lindholm <holindho@cs.helsinki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6686): saa7134: fix composite over s-video input on the Tevion MD 9717Hermann Pitton
The vmux for composite over s-video input was wrong. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6684): Complement va_start() with va_end() + style fixesRichard Knutsson
Complement va_start() with va_end() + minor style fixes in the same function. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6666): saa7134-alsa: fix period handlingHeikki Lindholm
The period handling in saa7134-alsa is broken in two ways. First, the minimum number of periods of two does not work, because the dma is setup two periods ahead in the irq handler. Fix the minimum to four periods. Second, the code assumes that the number of periods is divisible by two, which isn't always the case on ALSA. Fix by adding a constraint. Signed-off-by: Heikki Lindholm <holindho@cs.helsinki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6629): zl10353: fix default adc_clock and TRL nominal rate calculationChris Pascoe
The default adc_clock for the zl10353 is different from what was originally thought to be the case and the TRL nominal rate formula was incorrect as a result. Use a better (and hopefully now correct) formula. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6615): V4L: Fix VIDIOCGMBUF locking in saa7146Brandon Philips
Fallout from videobuf_mmap_setup() locking fixes. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6602): V4L: Convert videobuf drivers to videobuf_stopBrandon Philips
Drivers were using cookie cutter code for stopping the read/stream. Use the new videobuf_stop function which is lock safe. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6601): V4L: videobuf-core locking fixes and commentsBrandon Philips
- Add comments to functions that require that caller hold q->lock - Add __videobuf_mmap_free that doesn't hold q->lock for use within videobuf - Add locking to videobuf_mmap_free - Fix linux/drivers/media/common/saa7146_video.c which was holding lock around videobuf_read_stop - Add locking to functions that operate on a queue - Add videobuf_stop to take care of stopping in both the read and stream case TODO: bttv still has an unsafe call to videobuf_queue_is_busy Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6581): Fix: avoids negative vma usage countMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6579): Fix bug #8824: Correct support for Diseqc on tda10086Hartmut Hackmann
This is a modified version of a patch previously posted by Thomas Unverzagt. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6542): Fix S-video mode on tvp5150Mauro Carvalho Chehab
Thanks to Markus Reichberger to point this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6540): em28xx: fix failing autodetection after the rebootSascha Sommer
The attached patch is required so that the autodetecion code also works after a reboot. Setting the I2C speed does not seem to be supported for em2800. Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6485): ivtv: fix compile warningHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11[IPSEC]: Fix potential dst leak in xfrm_lookupHerbert Xu
If we get an error during the actual policy lookup we don't free the original dst while the caller expects us to always free the original dst in case of error. This patch fixes that. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[VLAN]: Fix potential race in vlan_cleanup_module vs vlan_ioctl_handler.Pavel Emelyanov
The vlan module cleanup function starts with vlan_netlink_fini(); vlan_ioctl_set(NULL); The first call removes all the vlan devices and the second one closes the vlan ioctl. AFAIS there's a tiny race window between these two calls - after rtnl unregistered all the vlans, but the ioctl handler isn't set to NULL yet, user can manage to call this ioctl and create one vlan device, and that this function will later BUG_ON seeing non-emply hashes. I think, that we must first close the vlan ioctl and only after this remove all the vlans with the vlan_netlink_fini() call. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[NET]: Fix wrong comments for unregister_net*Wang Chen
There are some return value comments for void functions. Fixed it. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[BNX2]: Update version to 1.6.9.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[BNX2]: Fix RX packet rot.Michael Chan
Packets can be left in the RX ring if the NAPI budget is reached. This is caused by storing the latest rx index at the beginning of bnx2_rx_int(). We may not process all the work up to this index if the budget is reached and so some packets in the RX ring may rot when we later check for more work using this stored rx index. The fix is to not store this latest hw index and only store the processed rx index. We use a new function bnx2_get_hw_rx_cons() to fetch the latest hw rx index. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[BNX2]: Add PHY_DIS_EARLY_DAC workaround.Michael Chan
5709 Ax and Bx chips all need this workaround. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[S390]: Fix use of skb after netif_rxJulia Lawall
Recently, Wang Chen submitted a patch (d30f53aeb31d453a5230f526bea592af07944564) to move a call to netif_rx(skb) after a subsequent reference to skb, because netif_rx may call kfree_skb on its argument. netif_rx_ni calls netif_rx, so the same problem occurs in the files below. I have left the updating of dev->last_rx after the calls to netif_rx_ni because it seems time dependent, but moved the other field updates before. This was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression skb, e,e1; @@ ( netif_rx(skb); | netif_rx_ni(skb); ) ... when != skb = e ( skb = e1 | * skb ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 05:40:30 +0000