aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-05-07[POWERPC] mpc52xx suspend to deep-sleepDomen Puncer
Implement deep-sleep on MPC52xx. SDRAM is put into self-refresh with help of SRAM code (alternatives would be code in FLASH, I-cache). Interrupt code must also not be in SDRAM, so put it in I-cache. MPC52xx core is static, so contents will remain intact even with clocks turned off. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Don't shutdown TX on mpc5200 serial port if it is a consoleGrant Likely
If the serial port gets shut down, then console output stalls. 9 out of 10 kernel hackers agree, this is a bad thing. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Set efika's device_type to "soc"Domen Puncer
Device type should be "soc" (as in lite5200.dts), compatible is already set to "mpc5200". Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] lite5200(b) support for i2cDomen Puncer
Add fsl-i2c to mpc5200 i2c node in device tree, and enable FSL_SOC. Tested to work with built-in eeprom on lite5200b. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] lite5200(b) DTS fixesDomen Puncer
Three trivial DTS fixes: -Mark Lite5200(b) boards as "mpc5200" compatible. On efika the firmware already does that. -Fix mscan interrupt. -Fix wakeup GPIO address. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] macintosh: Use common modalias generation for macio_sysfsSylvain Munaut
There is now a common function to generate the modalias string, so use it. We just need to add the \n at the end. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Export of_device_get_modaliasSylvain Munaut
Apparently other parts of the kernel need to know the modalias internally (like the sysfs code in macintosh driver). To avoid consistency issues, we export this code and use it everywhere it's needed rather than repeat it ... Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Fix some missing build dependencies in arch/powerpc/bootDavid Gibson
This patch fixes a couple of missing dependencies in arch/powerpc/boot/Makefile. First, it ensures that the zlib.h header is linked in before attempting to build gunzip_util.o, as it is, building gunzip_util.o usually works, but not always depending on make order. Second, it makes the final images which are built using a dts dependent on that dts, so the image will be correctly rebuilt if the dts changes. This in turn requires fixing the definition of the dts variable. CONFIG_DEVICE_TREE from Kconfig will have quotes around it, which don't matter when passing the variable to a shell, but which need to be removed when incorporating it into a filename for make's use. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Kill off the PTE_FMT macroDavid Gibson
32-bit powerpc uses a PTE_FMT macro to handle printk() formatting of PTE entries (which can vary in type and size). Apparently there was a good reason for it once, but with current compilers it's simpler just to workaround the variation with a cast in the printk() itself (there's only one use). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] pasemi: Update ppc_proc_freq from cpufreq driverOlof Johansson
Update the global cpu speed variable according to current cpufreq speed, /proc/cpuinfo reports the actual speed. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] powermac: Suspend to disk on G5Johannes Berg
Powermac G5 suspend to disk implementation. The code is platform agnostic but only tested on powermac, no other 64-bit powerpc machines. Because nvidiafb still breaks suspend I have marked it EXPERIMENTAL on powermac and because I can't test it and some lowlevel code will need changes it is BROKEN on all other 64-bit platforms. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] DART iommu suspendJohannes Berg
This implements save and restore hooks for IOMMUs and implements it the DART iommu. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Rename device_is_compatible to of_device_is_compatibleStephen Rothwell
for consistency with other Open Firmware interfaces (and Sparc). This is just a straight replacement. This leaves the compatibility define in place. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] powermac: Support G5 CPU hotplugJohannes Berg
This allows "hotplugging" of CPUs on G5 machines. CPUs that are disabled are put into an idle loop with the decrementer frequency set to minimum. To wake them up again we kick them just like when bringing them up. To stop those CPUs from messing with any global state we stop them from entering the timer interrupt. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] bootwrapper: Only build cuImage if CONFIG_DEVICE_TREE is non-emptyScott Wood
This allows the zImage target to once again be used to build all supported image types, rather than requiring an explicit "make uImage" to avoid failing to create an unneeded cuImage. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Add smp_call_function_map and smp_call_function_singlewill schmidt
Add a new function named smp_call_function_single(). This matches a generic prototype from include/linux/smp.h. Add a function smp_call_function_map(). This is, for the most part, a rename of smp_call_function, with some added cpumask support. smp_call_function and smp_call_function_single call into smp_call_function_map. Lightly tested on 970mp (blade), power4 and power5. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> cc: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Change topology_init() to a subsys_initcallKevin Corry
Change the powerpc version of topology_init() from an __initcall to a subsys_initcall to match all other architectures. Signed-off-by: Kevin Corry <kevcorry@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] MPIC sys_device & suspend/resumeJohannes Berg
This adds mpic to the system devices and implements suspend and resume for them. This is necessary to get interrupts for modules back to where they were before a suspend to disk. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] 64K page support for kexecLuke Browning
This fixes a couple of kexec problems related to 64K page support in the kernel. kexec issues a tlbie for each pte. The parameters for the tlbie are the page size and the virtual address. Support was missing for the computation of these two parameters for 64K pages. This adds that support. Signed-off-by: Luke Browning <lukebrowning@us.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Minor fault path optimizationChristoph Hellwig
Call the kprobes pagefault handler directly instead of going through the complex notifier chain. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Transparently handle <.symbol> lookup for kprobesSrinivasa Ds
When data symbols are not present in kernel image, user needs to add dot(".") before function name explicitly, that he wants to probe in kprobe module on ppc64. for ex:- When data symbols are missing on ppc64, ==================== [root@llm27lp1 ~]# cat /proc/kallsyms | grep do_fork c00000000006283c T .do_fork ============================== User needs add "." to "do_fork" kp.symbol_name = ".do_fork"; ============================ This makes kprobe modules unportable. This fixes the problem. Signed-off-by: Srinivasa Ds <srinivasa@in.ibm.com> Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Remove duplicate export of __div64_32.Scott Wood
Change 3927f2e8f9afa3424bb51ca81f7abac01ffd0005 moved lib/lib64.c from lib-y to obj-y, preventing the export in ppc_ksyms.c from overriding the one in lib, and thus causing a duplicate-export warning. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] pasemi: Only call of_platform_bus_probe() on relevant platformsOlof Johansson
Only publish of_platform devices if running on a machine that has them. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Rename get_property to of_get_property: driversStephen Rothwell
These are all the remaining instances of get_property. Simple rename of get_property to of_get_property. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] get_property returns constStephen Rothwell
This is the last place that needs changing since get_property was changed to return "const void *". Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Small cleanups to the cuboot bootwrapper codeDavid Gibson
This patch makes a few small cleanups to the cuboot code. - It removes the double layered selection of images, via cuboot-plat-y, instead having the cuboot platforms directly select a suitable image-y (this changes the name of the final cuboot image from plain cuImage to cuImage.<platform>). - Factors out some code in the wrapper that's potentially useful to platforms other than uboot. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] PS3: Defconfig updatesGeoff Levand
Updates to ps3_defconfig for linux-2.6.21. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] PS3: Fix system slowdownTakao Shinohara
The PS3 HV will deliver soft-disabled interrupts at the next HV call or interrupt. Add an HV call to local_irq_restore() to force the timely delivery of any pending interrupts. This fixes the system slowdown bug reported here http://bugzilla.kernel.org/show_bug.cgi?id=8260 Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] PS3: Interrupt routine fixups.Geoff Levand
Fixups for the ps3 interrupt routines to support all HV device in a generic way. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] PS3: Remove duplicate variable assignementGeoff Levand
A minor change to remove a duplicate variable assignement in ps3_mm_shutdown(); Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] PS3: Add DABR supportGeoff Levand
Add PS3 support for the PowerPC processor's Data Address Breakpoint Register (DABR). Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Fix spurious vectors on weird MPICJosh Boyer
The weird TSI 10x MPIC needs an EOI after getting a spurious vector. This patch uses the existing MPIC_SPV_EOI flag to fix this issue. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Use menuconfig objects II - MacintoshJan Engelhardt
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu", so that the user can disable all the options in that menu at once instead of having to disable each option separately. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Fix suspend states againJohannes Berg
In commit 0fba3a1f39f8b0a50b56c8b068fa52131cbc84c2 (a very long time ago, May 2006), I fixed a bug that caused powermacs to crash when you tried entering standby/mem suspend states. As I'm now getting more familiar with the suspend code I notice a few more things: 1. we previously misunderstood what pm_ops is for, it isn't supposed to be for doing platform dependent suspend/resume stuff that needs to be done for suspend to disk (as we currently try to use it!), it is instead for entering platform dependent suspend states ("standby", "mem"). 2. due to the first point, we never properly save FPU and altivec states when suspending to disk. It probably hasn't hurt yet because the process that writes the "disk" to /sys/power/state uses neither and its context is used. This patch addresses these points as follows: 1. remove all pm_ops from powermac, powermac suspend to ram isn't currently usable via /sys/power/state but is done via the PMU instead. 2. move the code responsible for storing FPU/altivec state into save_processor_state and the set_context() call to restore_processor_state. 3. add a call to kernel_enable_spe() It may look like there is some code removal missing but that is actually because the new suspend.h file overrides the ppc/suspend.h one which was previously used. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Remove arch/powerpc's dependence on asm-ppc/pg{alloc,table}.hDavid Gibson
Currently, all 32-bit powerpc platforms use asm-ppc/pgtable.h and asm-ppc/pgalloc.h, even when otherwise compiled with ARCH=powerpc. Those asm-ppc files are a fairly nasty tangle of #ifdefs including a bunch of things which shouldn't be necessary any more in arch/powerpc. Cleaning up that mess is going to take a while, but this patch is a first step. It separates the asm-powerpc/pg{alloc,table}.h into 64 bit and 32 bit versions in asm-powerpc, which the basic .h files in asm-powerpc select based on config. We make a few tiny tweaks to the innards of the files along the way, making the outermost ifdefs (double-inclusion protection and __KERNEL__) a little cleaner, and #including asm-generic/pgtable.h from the top-level asm-powerpc/pgtable.h (since both the old 32-bit and 64-bit versions ended with such an #include). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Fix STRICT_MM_TYPECHECKSDavid Gibson
Since we don't have it active by default, the STRICT_MM_TYPECHECKS option has bitrotted again. This patch fixes a couple of simple build fixes if the option is selected. First, pud_t mustn't be defined in page.h on 32-bit systems, because it conflicts with the version in the generic pud-folding code. Second, pci_32.c is missing a __pgprot() wrapper call. Third, a couple of PS3 files use constants of type pgprot_t when they need the raw values, we add pgprot_val() calls to fix this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Revise PPC44x MMU code for arch/powerpcDavid Gibson
This patch takes the definitions for the PPC44x MMU (a software loaded TLB) from asm-ppc/mmu.h, cleans them up of things no longer necessary in arch/powerpc and puts them in a new asm-powerpc/mmu_44x.h file. It also substantially simplifies arch/powerpc/mm/44x_mmu.c and makes a couple of small fixes necessary for the 44x MMU code to build and work properly in arch/powerpc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Uninline of_iomap functionChristian Krafft
There is no big reason to have that function inlined. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Initialise spinlock in the DEBUG_PAGEALLOC codeMichael Ellerman
Fixes: BUG: spinlock bad magic on CPU#0, swapper/0 lock: c00000000064ec30, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 Call Trace: [c00000000062b980] [c00000000000f920] .show_stack+0x6c/0x1a0 (unreliable) [c00000000062ba20] [c0000000001c2b40] .spin_bug+0xb0/0xd4 [c00000000062bab0] [c0000000001c2ed0] ._raw_spin_lock+0x44/0x184 [c00000000062bb50] [c0000000003a42b4] ._spin_lock+0x10/0x24 [c00000000062bbd0] [c00000000002b4dc] .kernel_map_pages+0x198/0x278 [c00000000062bc90] [c000000000079720] .free_hot_cold_page+0x124/0x418 [c00000000062bd70] [c000000000530278] .free_all_bootmem_core+0x14c/0x224 [c00000000062be50] [c00000000052a178] .mem_init+0x68/0x170 [c00000000062bee0] [c00000000051d874] .start_kernel+0x2a0/0x37c [c00000000062bf90] [c0000000000084c8] .start_here_common+0x54/0x8c Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Turn on corresponding PHY drivers in QE UEC platforms defconfigsKim Phillips
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Add 'mdio' to bus scan id list for platforms with QE UECKim Phillips
Add 'mdio' to bus scan id list for platforms with QE UEC as a consequence of converting UEC mdio driver to an of_platform driver in the ucc_geth phylib conversion patch. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Replace undocumented interface properties in dts filesKim Phillips
phy-connection-type now supersedes the interface property. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Document phy-connection-type propertyKim Phillips
Since ucc_geth is being migrated to use the phylib, the existing (undocumented) 'interface' property is being deprecated in favour of 'phy-connection-type'. phy-connection-type is now maintained one-to-one with definitions in include/linux/phy.h, albeit in the form of a string. If not specified, "mii" is assumed. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] pseries: Handle null iommu dma-window property correctlyLinas Vepstas
Some versions of pSeries firmware fail to set up a dma-window property for PCI slots that are unoccupied. As a result, the loop searching for this propery, in pci_dma_dev_setup_pSeriesLP(), can run to the end, resulting in a NULL pointer dereference later in the routine. This patch prevents the crash, and prints a warning message. This is theoretically a rare error, as it occurs on what is hopefully just beta levels of firmware. But just in case this firmware escapes into the wild, this patch will avoid the crash. Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
2007-05-02[POWERPC] powermac: Fix G5-cpufreq for cpu on/offlineJohannes Berg
The original code here is wrong, it applies "previous" knowledge. The way the cpufreq core is designed is that the policy for the secondary CPU that comes online says that it must in fact not use this policy but use the same as the other CPUs that are listed, which in fact is CPU#0. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] apm_emu: Use generic apm-emulationJohannes Berg
This patch removes a huge amount of code that is now in common code in drivers/char/apm-emulation.c Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] kernel: Remove loops_per_jiffy code for 7448HPC2 platformsZang Roy-r61911
Remove loops_per_jiffy early initialization code for 7448HPC2 platforms. Since udelay no longer uses loops_per_jiffy it is not necessary to initialize it early. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] drivers/macintosh/mac_hid.c: Make code staticAdrian Bunk
This patch makes some needlessly global code static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Remove unneeded page_is_ram exportJohannes Berg
arch/powerpc/mm/mem.c exports page_is_ram, which is not used anywhere that could be modular. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Move of_irq_to_resource from prom.h to prom_parse.cMathieu Desnoyers
In the powerpc architecture, of_irq_to_resource, currently sitting in prom.h, needs irq_of_parse_and_map and NO_IRQ from asm-powerpc/irq.h. The solution suggested by Benjamin Herrenschmidt is to move it to arch/powerpc/kernel/prom_parse.c. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>