aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-10-14ftrace: make work with new ring bufferSteven Rostedt
This patch ports ftrace over to the new ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ring_buffer: reset buffer page when freeingSteven Rostedt
Mathieu Desnoyers pointed out that the freeing of the page frame needs to be reset otherwise we might trigger BUG_ON in the page free code. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ring_buffer: add paranoid check for buffer pageSteven Rostedt
If for some strange reason the buffer_page gets bigger, or the page struct gets smaller, I want to know this ASAP. The best way is to not let the kernel compile. This patch adds code to test the size of the struct buffer_page against the page struct and will cause compile issues if the buffer_page ever gets bigger than the page struct. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing: unified trace bufferSteven Rostedt
This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: give time for wakeup test to runSteven Rostedt
It is possible that the testing thread in the ftrace wakeup test does not run before we stop the trace. This will cause the trace to fail since nothing will be in the buffers. This patch adds a small wait in the wakeup test to allow for the woken task to run and be traced. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: don't consume unhandled entries by boot tracerFrédéric Weisbecker
When the boot tracer can't handle an entry output, it returns 1. It should return 0 to relay on other output functions. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace/fastboot: disable tracers self-tests when boot tracer is selectedFrédéric Weisbecker
The tracing engine resets the ring buffer and the tracers touch it too during self-tests. These self-tests happen during tracers registering and work against boot tracing which is logging initcalls. We have to disable tracing self-tests if the boot-tracer is selected. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: launch boot tracing after pre-smp initcallsFrédéric Weisbecker
Launch the boot tracing inside the initcall_debug area. Old printk have not been removed to keep the old way of initcall tracing for backward compatibility. [ mingo@elte.hu: resolved conflicts ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: give an entry on the config for boot tracerFrédéric Weisbecker
Bring the entry to choose the boot tracer on the kernel config. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: make tracing suitable to run the boot tracerFrédéric Weisbecker
The tracing engine have now to be init in early_initcall to set the boot tracer. Only the debugfs settings will be initialized at fs_initcall time. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: add the boot tracerFrédéric Weisbecker
Add the boot/initcall tracer. It's primary purpose is to be able to trace the initcalls. It is intended to be used with scripts/bootgraph.pl after some small improvements. Note that it is not active after its init. To avoid tracing (and so crashing) before the whole tracing engine init, you have to explicitly call start_boot_trace() after do_pre_smp_initcalls() to enable it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/fastboot: add a script to visualize the kernel boot process / timeArjan van de Ven
When optimizing the kernel boot time, it's very valuable to visualize what is going on at which time. In addition, with the fastboot asynchronous initcall level, it's very valuable to see which initcall gets run where and when. This patch adds a script to turn a dmesg into a SVG graph (that can be shown with tools such as InkScape, Gimp or Firefox) and a small change to the initcall code to print the PID of the thread calling the initcall (so that the script can work out the parallelism). Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-10-14markers: bit-field is not thread-safe nor smp-safeLai Jiangshan
bit-field is not thread-safe nor smp-safe. struct marker_entry.rcu_pending is not protected by any lock in rcu-callback free_old_closure(). so we must turn it into a safe type. detail: I suppose rcu_pending and ptype are store in struct marker_entry.tmp1 free_old_closure() side: change ptype side: | load struct marker_entry.tmp1 --------------------------------|-------------------------------- | change ptype bit in tmp1 load struct marker_entry.tmp1 | change rcu_pending bit in tmp1 | store tmp1 | --------------------------------|-------------------------------- | store tmp1 now this result equals that free_old_closure() do not change rcu_pending bit, bug! This bug will cause redundant rcu_barrier_sched() called. not too harmful. ----- corresponding: free_old_closure() side: change ptype side: load struct marker_entry.tmp1 | --------------------------------|-------------------------------- | load struct marker_entry.tmp1 change rcu_pending bit in tmp1 | | change ptype bit in tmp1 | store tmp1 --------------------------------|-------------------------------- store tmp1 | now this result equals that change ptype side do not change ptype bit, bug! this bug cause marker_probe_cb() access to invalid memory. oops! see also: http://en.wikipedia.org/wiki/Bit_field Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14markers: fix unchecked formatLai Jiangshan
when the second, third... probe is registered, its format is not checked, this patch fixes it. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14markers: turn marker_synchronize_unregister() into an inlineMathieu Desnoyers
Turn marker synchronize unregister into a static inline. There is no reason to keep it as a macro over a static inline. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14markers: re-enable fast batch registrationMathieu Desnoyers
Lai Jiangshan discovered a reentrancy issue with markers and fixed it by adding synchronize_sched() calls at each registration/unregistraiton. It works, but it removes the ability to do batch registration/unregistration and can cause registration of ~100 markers to take about 30 seconds on a loaded machine (synchronize_sched() is much slower on such workloads). This patch implements a version of the fix which won't slow down marker batch registration/unregistration. It also go back to the original non-synchronized reg/unreg. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14sputrace: use marker_synchronize_unregister()Mathieu Desnoyers
We need a marker_synchronize_unregister() before the end of exit() to make sure every probe callers have exited the non preemptible section and thus are not executing the probe code anymore. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14markers: documentation fix for teardownMathieu Desnoyers
Document the need for a marker_synchronize_unregister() before the end of exit() to make sure every probe callers have exited the non preemptible section and thus are not executing the probe code anymore. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14markers: probe example, fix teardownMathieu Desnoyers
Need a marker_synchronize_unregister() before the end of exit() to make sure every probe callers have exited the non preemptible section and thus are not executing the probe code anymore. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14markers: fix unregister bug and reenter bug, cleanupMathieu Desnoyers
Use the new rcu_read_lock_sched/unlock_sched() in marker code around the call site instead of preempt_disable/enable(). It helps reviewing the code more easily. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14markers: marker_synchronize_unregister()Mathieu Desnoyers
Create marker_synchronize_unregister() which must be called before the end of exit() to make sure every probe callers have exited the non preemptible section and thus are not executing the probe code anymore. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracepoints: fix reentrancyMathieu Desnoyers
The tracepoints had the same problem markers did have wrt reentrancy. Apply a similar fix using a rcu_barrier after each tracepoint mutex lock. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracepoints: use rcu schedMathieu Desnoyers
Make tracepoints use rcu sched. (cleanup) Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14markers: fix unregister bug and reenter bugLai Jiangshan
unregister bug: codes using makers are typically calling marker_probe_unregister() and then destroying the data that marker_probe_func needs(or unloading this module). This is bug when the corresponding marker_probe_func is still running(on other cpus), it is using the destroying/ed data. we should call synchronize_sched() after marker_update_probes(). reenter bug: marker_probe_register(), marker_probe_unregister() and marker_probe_unregister_private_data() are not reentrant safe functions. these 3 functions release markers_mutex and then require it again and do "entry->oldptr = old; ...", but entry->oldptr maybe is using now for these 3 functions may reenter when markers_mutex is released. we use synchronize_sched() instead of call_rcu_sched() to fix this bug. actually we can do: " if (entry->rcu_pending) rcu_barrier_sched(); " after require markers_mutex again. but synchronize_sched() is better and simpler. For these 3 functions are not critical path. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14x86/ftrace: use uaccess in atomic contextFrédéric Weisbecker
With latest -tip I get this bug: [ 49.439988] in_atomic():0, irqs_disabled():1 [ 49.440118] INFO: lockdep is turned off. [ 49.440118] Pid: 2814, comm: modprobe Tainted: G W 2.6.27-rc7 #4 [ 49.440118] [<c01215e1>] __might_sleep+0xe1/0x120 [ 49.440118] [<c01148ea>] ftrace_modify_code+0x2a/0xd0 [ 49.440118] [<c01148a2>] ? ftrace_test_p6nop+0x0/0xa [ 49.440118] [<c016e80e>] __ftrace_update_code+0xfe/0x2f0 [ 49.440118] [<c01148a2>] ? ftrace_test_p6nop+0x0/0xa [ 49.440118] [<c016f190>] ftrace_convert_nops+0x50/0x80 [ 49.440118] [<c016f1d6>] ftrace_init_module+0x16/0x20 [ 49.440118] [<c015498b>] load_module+0x185b/0x1d30 [ 49.440118] [<c01767a0>] ? find_get_page+0x0/0xf0 [ 49.440118] [<c02463c0>] ? sprintf+0x0/0x30 [ 49.440118] [<c034e012>] ? mutex_lock_interruptible_nested+0x1f2/0x350 [ 49.440118] [<c0154eb3>] sys_init_module+0x53/0x1b0 [ 49.440118] [<c0352340>] ? do_page_fault+0x0/0x740 [ 49.440118] [<c0104012>] syscall_call+0x7/0xb [ 49.440118] ======================= It is because ftrace_modify_code() calls copy_to_user and copy_from_user. These functions have been inserted after guessing that there couldn't be any race condition but copy_[to/from]_user might sleep and __ftrace_update_code is called with local_irq_saved. These function have been inserted since this commit: d5e92e8978fd2574e415dc2792c5eb592978243d: "ftrace: x86 use copy from user function" Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14x86: suppress trivial sparse signedness warningsHarvey Harrison
Could just as easily change the three casts to cast to the correct type...this patch changes the type of ftrace_nop instead. Supresses sparse warnings: arch/x86/kernel/ftrace.c:157:14: warning: incorrect type in assignment (different signedness) arch/x86/kernel/ftrace.c:157:14: expected long *static [toplevel] ftrace_nop arch/x86/kernel/ftrace.c:157:14: got unsigned long *<noident> arch/x86/kernel/ftrace.c:161:14: warning: incorrect type in assignment (different signedness) arch/x86/kernel/ftrace.c:161:14: expected long *static [toplevel] ftrace_nop arch/x86/kernel/ftrace.c:161:14: got unsigned long *<noident> arch/x86/kernel/ftrace.c:165:14: warning: incorrect type in assignment (different signedness) arch/x86/kernel/ftrace.c:165:14: expected long *static [toplevel] ftrace_nop arch/x86/kernel/ftrace.c:165:14: got unsigned long *<noident> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: warn on failure to disable mcount callersSteven Rostedt
With the recent updates to ftrace, there should not be any failures when modifying the code. If there is, then we need to warn about it. This patch has a cleaned up version of the code that I used to discover that the weak symbols were causing failures. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: replace none tracer by nop tracerFrédéric Weisbecker
Replace "none" tracer by the recently created "nop" tracer. Both are pretty similar except that nop accepts TRACE_PRINT or TRACE_SPECIAL entries. And as a consequence, changing the size of the ring buffer now requires that tracing has already been disabled. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: tracing engine depends on Nop TracerFrédéric Weisbecker
Now that the nop tracer is used as the default tracer by replacing the "none" tracer, tracing engine depends on it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: make nop tracer reset previous entriesFrédéric Weisbecker
If nop tracer is selected, some old entries from the previous tracer could still be enqueued. Tracing have to be reset. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14trace: remove pointless ifdefsSteven Noonan
The functions are already 'extern' anyway, so there's no problem with linkage. Removing these ifdefs also helps find any potential compiler errors. Suggested by Andrew Morton. Signed-off-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: mcount_addr defined but not usedSteven Noonan
When CONFIG_DYNAMIC_FTRACE isn't used, neither is mcount_addr. This patch eliminates that warning. Signed-off-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: add nop tracerSteven Noonan
A no-op tracer which can serve two purposes: 1. A template for development of a new tracer. 2. A convenient way to see ftrace_printk() calls without an irrelevant trace making the output messy. [ mingo@elte.hu: resolved conflicts ] Signed-off-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: inject markers via trace_marker filePekka Paalanen
Allow a user to inject a marker (TRACE_PRINT entry) into the trace ring buffer. The related file operations are derived from code by Frédéric Weisbecker <fweisbec@gmail.com>. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14mmiotrace: remove left-over marker cruftPekka Paalanen
Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14mmiotrace: handle TRACE_PRINT entriesPekka Paalanen
Also make trace_seq_print_cont() non-static, and add a newline if the seq buffer can't hold all data. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14x86 mmiotrace: implement mmiotrace_printk()Pekka Paalanen
Offer mmiotrace users a function to inject markers from inside the kernel. This depends on the trace_vprintk() patch. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: add trace_vprintk()Pekka Paalanen
trace_vprintk() for easier implementation of tracer specific *_printk functions. Add check check for no_tracer, and implement __ftrace_printk() as a wrapper. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: move mmiotrace functions out of trace.cPekka Paalanen
Moves the mmiotrace specific functions from trace.c to trace_mmiotrace.c. Functions trace_wake_up(), tracing_get_trace_entry(), and tracing_generic_entry_update() are therefore made available outside trace.c. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14x86 mmiotrace: fix a rare memory leakPekka Paalanen
Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: fix unlocking of hashSteven Rostedt
This must be brown paper bag week for Steven Rostedt! While working on ftrace for PPC, I discovered that the hash locking done when CONFIG_FTRACE_MCOUNT_RECORD is not set, is totally incorrect. With a cut and paste error, I had the hash lock macro to lock for both hash_lock _and_ hash_unlock! This bug did not affect x86 since this bug was introduced when CONFIG_FTRACE_MCOUNT_RECORD was added to x86. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: use ftrace_release for all dynamic ftrace functionsSteven Rostedt
ftrace_release is necessary for all uses of dynamic ftrace and not just the archs that have CONFIG_FTRACE_MCOUNT_RECORD defined. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: make it depend on DEBUG_KERNELIngo Molnar
make most of the tracers depend on DEBUG_KERNEL - that's their intended purpose. (most distributions have DEBUG_KERNEL enabled anyway so this is not a practical limitation - but it simplifies the tracing menu in the normal case) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: sched_switch: show the wakee's cpuPeter Zijlstra
While profiling the smp behaviour of the scheduler it was needed to know to which cpu a task got woken. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: make ftrace_printk usable with the other tracersPeter Zijlstra
Currently ftrace_printk only works with the ftrace tracer, switch it to an iter_ctrl setting so we can make us of them with other tracers too. [rostedt@redhat.com: tweak to the disable condition] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: print continue index fixSteven Rostedt
An item in the trace buffer that is bigger than one entry may be split up using the TRACE_CONT entry. This makes it a virtual single entry. The current code increments the iterator index even while traversing TRACE_CONT entries, making it look like the iterator is further than it actually is. This patch adds code to not increment the iterator index while skipping over TRACE_CONT entries. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: binary and not logical for continue testSteven Rostedt
Peter Zijlstra provided me with a nice brown paper bag while letting me know that I was doing a logical AND and not a binary one, making a condition true more often than it should be. Luckily, a false true is handled by the calling function and no harm is done. But this needs to be fixed regardless. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: make output nicely spaced for up to 999 cpusMichael Ellerman
Currently some of the ftrace output goes skewiff if you have more than 9 cpus, and some if you have more than 99. Twiddle with the headers and format strings to make up to 999 cpus display without causing spacing problems. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14stack tracer: depends on DEBUG_KERNELIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: stack trace add indexesSteven Rostedt
This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>