aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-04-02atmel_serial: fix uart/console concurrent accessMarc Pignat
Strange chars appear on the serial port when a printk and a printf happens at the same time. This is caused by the pdc sending chars while atmel_console_write (called from printk) is executing Concurent access of uart and console to the same port leads to corrupted data to be transmitted, so disable tx dma (PDC) while writing to the console. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02atmel_serial: avoid stopping pdc during transmissionMichael Trimarchi
I found a problem related to losing data during pdc transmission in atmel_serial: connect ttyS1 with ttyS2 using a loopback cable, send 30 byte of packet from one to the other and waiting for 30 byte. On the other side just read and echo the data received. We always call atmel_tx_dma() from the tasklet regardless of what interrupt triggered it. Signed-off-by: michael <trimarchi@gandalf.sssup.it> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02kvm: provide kvm.h for all architecture: fixes headers_installChristian Borntraeger
Currently include/linux/kvm.h is not considered by make headers_install, because Kbuild cannot handle " unifdef-$(CONFIG_FOO) += foo.h. This problem was introduced by commit fb56dbb31c4738a3918db81fd24da732ce3b4ae6 Author: Avi Kivity <avi@qumranet.com> Date: Sun Dec 2 10:50:06 2007 +0200 KVM: Export include/linux/kvm.h only if $ARCH actually supports KVM Currently, make headers_check barfs due to <asm/kvm.h>, which <linux/kvm.h> includes, not existing. Rather than add a zillion <asm/kvm.h>s, export kvm. only if the arch actually supports it. Signed-off-by: Avi Kivity <avi@qumranet.com> which makes this an 2.6.25 regression. One way of solving the issue is to enhance Kbuild, but Avi and David conviced me, that changing headers_install is not the way to go. This patch changes the definition for linux/kvm.h to unifdef-y. If  unifdef-y is used for linux/kvm.h "make headers_check" will fail on all architectures without asm/kvm.h. Therefore, this patch also provides asm/kvm.h on all architectures. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Avi Kivity <avi@qumranet.com> Cc: Sam Ravnborg <sam@ravnborg.org Cc: David Woodhouse <dwmw2@infradead.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: use ->ata_input_data in ide_driveid_update() ide-h8300: 32-bit I/O is unsupported ide/legacy/q40ide.c: add MODULE_LICENSE ide/legacy/macide: add MODULE_LICENSE ide/legacy/falconide.c: add MODULE_LICENSE ide/legacy/buddha.c: add MODULE_LICENSE ide/legacy/gayle.c: add MODULE_LICENSE ide/h8300/ide-h8300.c: add MODULE_LICENSE ide/cris/ide-cris.c: add MODULE_LICENSE ide/arm/ide_arm.c: add MODULE_LICENSE ide/ppc/pmac.c: add MODULE_LICENSE ide/ppc/mpc8xx.c: add MODULE_LICENSE ide/pci/cmd640.c: add MODULE_LICENSE ide-pnp.c: add MODULE_LICENSE
2008-04-02ide: use ->ata_input_data in ide_driveid_update()Bartlomiej Zolnierkiewicz
Use ->ata_input_data method instead of calling ata_input_data() directly. Currently it matters only for (broken) ide-cris host driver but it may change in the future. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide-h8300: 32-bit I/O is unsupportedBartlomiej Zolnierkiewicz
This host driver doesn't support 32-bit I/O (it sets hwif->INSL/OUTSL to NULL) so IDE_HFLAG_NO_IO_32BIT host flag needs to be set. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide/legacy/q40ide.c: add MODULE_LICENSEAdrian Bunk
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide/legacy/macide: add MODULE_LICENSEAdrian Bunk
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide/legacy/falconide.c: add MODULE_LICENSEAdrian Bunk
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide/legacy/buddha.c: add MODULE_LICENSEAdrian Bunk
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide/legacy/gayle.c: add MODULE_LICENSEAdrian Bunk
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide/h8300/ide-h8300.c: add MODULE_LICENSEAdrian Bunk
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide/cris/ide-cris.c: add MODULE_LICENSEAdrian Bunk
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide/arm/ide_arm.c: add MODULE_LICENSEAdrian Bunk
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide/ppc/pmac.c: add MODULE_LICENSEAdrian Bunk
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide/ppc/mpc8xx.c: add MODULE_LICENSEAdrian Bunk
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide/pci/cmd640.c: add MODULE_LICENSEAdrian Bunk
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide-pnp.c: add MODULE_LICENSEAdrian Bunk
Now that it's in an own module it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02sky2: fix suspend/resume racesStephen Hemminger
There are a couple of possible races on suspend/resume. First the driver needs to block new packets from being queued for Tx. The other less likely problem is the watchdog timer going off during resume. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (7486): radio-cadet: wrap PNP probe code in #ifdef CONFIG_PNP V4L/DVB (7485): v4l2-int-device.c: add MODULE_LICENSE V4L/DVB (7466): Avoid minor model number warning when an OEM HVR1250 board is detected V4L/DVB (7465): Fix eeprom parsing and errors on the HVR1800 products V4L/DVB (7464): Convert driver to use a single SRAM memory map V4L/DVB (7461): bttv: fix missed index check V4L/DVB (7400): bttv: Add a radio compat_ioctl file operation V4L/DVB (7278): bttv: Re-enable radio tuner support for VIDIOCGFREQ/VIDIOCSFREQ ioctls V4L/DVB (7277): bttv: Re-enabling radio support requires the use of struct bttv_fh
2008-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] mvsas: check subsystem id [SCSI] mvsas: get phy info. [SCSI] mvsas: fix the buffer of rx DMA overflow bug [SCSI] mvsas: retry aborting task. [SCSI] mvsas: check hd whether unplugged [SCSI] mvsas : interrupt handling [SCSI] mvsas: a tag handler implementation [SCSI] mvsas: fill in error info record and phy mode6 bits. [SCSI] libsas: Warn if ATA device detected but CONFIG_SCSI_SAS_ATA not set [SCSI] hosts.c: fixes for "no error" reported after error scenarios Revert "[SCSI] fix bsg queue oops with iscsi logout"
2008-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: remove unused calc_npages() in iommu_common.h sparc64: add the segment boundary checking to IOMMUs while merging SG entries [SPARC64]: Don't open-code {get,put}_cpu_var() in flush_tlb_pending().
2008-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (45 commits) [VLAN]: Proc entry is not renamed when vlan device name changes. [IPV6]: Fix ICMP relookup error path dst leak [ATM] drivers/atm/iphase.c: compilation warning fix IPv6: do not create temporary adresses with too short preferred lifetime IPv6: only update the lifetime of the relevant temporary address bluetooth : __rfcomm_dlc_close lock fix bluetooth : use lockdep sub-classes for diffrent bluetooth protocol [ROSE/AX25] af_rose: rose_release() fix mac80211: correct use_short_preamble handling b43: Fix PCMCIA IRQ routing b43: Add DMA mapping failure messages mac80211: trigger ieee80211_sta_work after opening interface [LLC]: skb allocation size for responses [IP] UDP: Use SEQ_START_TOKEN. [NET]: Remove Documentation/networking/sk98lin.txt [ATM] atm/idt77252.c: Make 2 functions static [ATM]: Make atm/he.c:read_prom_byte() static [IPV6] MCAST: Ensure to check multicast listener(s). [LLC]: Kill llc_station_mac_sa symbol export. forcedeth: fix locking bug with netconsole ...
2008-04-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: selinux: handle files opened with flags 3 by checking ioctl permission
2008-04-02Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cfq-iosched: fix rcu freeing of cfq io contexts Fix bounce setting for 64-bit
2008-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] xcbc: Fix crash when ipsec uses xcbc-mac with big data chunk
2008-04-02afs: add missing up_write() on returnSven Schnelle
If afs_cell_alloc() fails, afs_cells_sem doesn't get unlocked, which leads to a deadlock. Unlock it before returning. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02cfq-iosched: fix rcu freeing of cfq io contextsFabio Checconi
SLAB_DESTROY_BY_RCU is not a direct substitute for normal call_rcu() freeing, since it'll page freeing but NOT object freeing. So change cfq to do the freeing on its own. Signed-off-by: Fabio Checconi <fabio@gandalf.sssup.it> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-02[VLAN]: Proc entry is not renamed when vlan device name changes.Pavel Emelyanov
This may lead to situations, when each of two proc entries produce data for the other's device. Looks like a BUG, so this patch is for net-2.6. It will not apply to net-2.6.26 since dev->nd_net access is replaced with dev_net(dev) one. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02Fix bounce setting for 64-bitAndrea Arcangeli
Looking a bit closer into this regression the reason this can't be right is that dma_addr common default is BLK_BOUNCE_HIGH and most machines have less than 4G. So if you do: if (b_pfn <= (min_t(u64, 0xffffffff, BLK_BOUNCE_HIGH) >> PAGE_SHIFT)) dma = 1 that will translate to: if (BLK_BOUNCE_HIGH <= BLK_BOUNCE_HIGH) dma = 1 So for 99% of hardware this will trigger unnecessary GFP_DMA allocations and isa pooling operations. Also note how the 32bit code still does b_pfn < blk_max_low_pfn. I guess this is what you were looking after. I didn't verify but as far as I can tell, this will stop the regression with isa dma operations at boot for 99% of blkdev/memory combinations out there and I guess this fixes the setups with >4G of ram and 32bit pci cards as well (this also retains symmetry with the 32bit code). Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-02[IPV6]: Fix ICMP relookup error path dst leakHerbert Xu
When we encounter an error while looking up the dst the second time we need to drop the first dst. This patch is pretty much the same as the one for IPv4. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02[ATM] drivers/atm/iphase.c: compilation warning fixLeonardo Potenza
Removed the warning messages: drivers/atm/iphase.c:961: warning: 'tcnter' defined but not used drivers/atm/iphase.c:963: warning: 'xdump' defined but not used tcnter and xdump() are used only in debug build Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02IPv6: do not create temporary adresses with too short preferred lifetimeBenoit Boissinot
From RFC341: A temporary address is created only if this calculated Preferred Lifetime is greater than REGEN_ADVANCE time units. In particular, an implementation must not create a temporary address with a zero Preferred Lifetime. Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02IPv6: only update the lifetime of the relevant temporary addressBenoit Boissinot
When receiving a prefix information from a routeur, only update the lifetimes of the temporary address associated with that prefix. Otherwise if one deprecated prefix is advertized, all your temporary addresses will become deprecated. Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-01bluetooth : __rfcomm_dlc_close lock fixDave Young
Lockdep warning will be trigged while rfcomm connection closing. The locks taken in rfcomm_dev_add: rfcomm_dev_lock --> d->lock In __rfcomm_dlc_close: d->lock --> rfcomm_dev_lock (in rfcomm_dev_state_change) There's two way to fix it, one is in rfcomm_dev_add we first locking d->lock then the rfcomm_dev_lock The other (in this patch), remove the locking of d->lock for rfcomm_dev_state_change because just locking "d->state = BT_CLOSED;" is enough. [ 295.002046] ======================================================= [ 295.002046] [ INFO: possible circular locking dependency detected ] [ 295.002046] 2.6.25-rc7 #1 [ 295.002046] ------------------------------------------------------- [ 295.002046] krfcommd/2705 is trying to acquire lock: [ 295.002046] (rfcomm_dev_lock){-.--}, at: [<f89a090a>] rfcomm_dev_state_change+0x6a/0xd0 [rfcomm] [ 295.002046] [ 295.002046] but task is already holding lock: [ 295.002046] (&d->lock){--..}, at: [<f899c533>] __rfcomm_dlc_close+0x43/0xd0 [rfcomm] [ 295.002046] [ 295.002046] which lock already depends on the new lock. [ 295.002046] [ 295.002046] [ 295.002046] the existing dependency chain (in reverse order) is: [ 295.002046] [ 295.002046] -> #1 (&d->lock){--..}: [ 295.002046] [<c0149b23>] check_prev_add+0xd3/0x200 [ 295.002046] [<c0149ce5>] check_prevs_add+0x95/0xe0 [ 295.002046] [<c0149f6f>] validate_chain+0x23f/0x320 [ 295.002046] [<c014b7b1>] __lock_acquire+0x1c1/0x760 [ 295.002046] [<c014c349>] lock_acquire+0x79/0xb0 [ 295.002046] [<c03d6b99>] _spin_lock+0x39/0x80 [ 295.002046] [<f89a01c0>] rfcomm_dev_add+0x240/0x360 [rfcomm] [ 295.002046] [<f89a047e>] rfcomm_create_dev+0x6e/0xe0 [rfcomm] [ 295.002046] [<f89a0823>] rfcomm_dev_ioctl+0x33/0x60 [rfcomm] [ 295.002046] [<f899facc>] rfcomm_sock_ioctl+0x2c/0x50 [rfcomm] [ 295.002046] [<c0363d38>] sock_ioctl+0x118/0x240 [ 295.002046] [<c0194196>] vfs_ioctl+0x76/0x90 [ 295.002046] [<c0194446>] do_vfs_ioctl+0x56/0x140 [ 295.002046] [<c0194569>] sys_ioctl+0x39/0x60 [ 295.002046] [<c0104faa>] syscall_call+0x7/0xb [ 295.002046] [<ffffffff>] 0xffffffff [ 295.002046] [ 295.002046] -> #0 (rfcomm_dev_lock){-.--}: [ 295.002046] [<c0149a84>] check_prev_add+0x34/0x200 [ 295.002046] [<c0149ce5>] check_prevs_add+0x95/0xe0 [ 295.002046] [<c0149f6f>] validate_chain+0x23f/0x320 [ 295.002046] [<c014b7b1>] __lock_acquire+0x1c1/0x760 [ 295.002046] [<c014c349>] lock_acquire+0x79/0xb0 [ 295.002046] [<c03d6639>] _read_lock+0x39/0x80 [ 295.002046] [<f89a090a>] rfcomm_dev_state_change+0x6a/0xd0 [rfcomm] [ 295.002046] [<f899c548>] __rfcomm_dlc_close+0x58/0xd0 [rfcomm] [ 295.002046] [<f899d44f>] rfcomm_recv_ua+0x6f/0x120 [rfcomm] [ 295.002046] [<f899e061>] rfcomm_recv_frame+0x171/0x1e0 [rfcomm] [ 295.002046] [<f899e357>] rfcomm_run+0xe7/0x550 [rfcomm] [ 295.002046] [<c013c18c>] kthread+0x5c/0xa0 [ 295.002046] [<c0105c07>] kernel_thread_helper+0x7/0x10 [ 295.002046] [<ffffffff>] 0xffffffff [ 295.002046] [ 295.002046] other info that might help us debug this: [ 295.002046] [ 295.002046] 2 locks held by krfcommd/2705: [ 295.002046] #0: (rfcomm_mutex){--..}, at: [<f899e2eb>] rfcomm_run+0x7b/0x550 [rfcomm] [ 295.002046] #1: (&d->lock){--..}, at: [<f899c533>] __rfcomm_dlc_close+0x43/0xd0 [rfcomm] [ 295.002046] [ 295.002046] stack backtrace: [ 295.002046] Pid: 2705, comm: krfcommd Not tainted 2.6.25-rc7 #1 [ 295.002046] [<c0128a38>] ? printk+0x18/0x20 [ 295.002046] [<c014927f>] print_circular_bug_tail+0x6f/0x80 [ 295.002046] [<c0149a84>] check_prev_add+0x34/0x200 [ 295.002046] [<c0149ce5>] check_prevs_add+0x95/0xe0 [ 295.002046] [<c0149f6f>] validate_chain+0x23f/0x320 [ 295.002046] [<c014b7b1>] __lock_acquire+0x1c1/0x760 [ 295.002046] [<c014c349>] lock_acquire+0x79/0xb0 [ 295.002046] [<f89a090a>] ? rfcomm_dev_state_change+0x6a/0xd0 [rfcomm] [ 295.002046] [<c03d6639>] _read_lock+0x39/0x80 [ 295.002046] [<f89a090a>] ? rfcomm_dev_state_change+0x6a/0xd0 [rfcomm] [ 295.002046] [<f89a090a>] rfcomm_dev_state_change+0x6a/0xd0 [rfcomm] [ 295.002046] [<f899c548>] __rfcomm_dlc_close+0x58/0xd0 [rfcomm] [ 295.002046] [<f899d44f>] rfcomm_recv_ua+0x6f/0x120 [rfcomm] [ 295.002046] [<f899e061>] rfcomm_recv_frame+0x171/0x1e0 [rfcomm] [ 295.002046] [<c014abd9>] ? trace_hardirqs_on+0xb9/0x130 [ 295.002046] [<c03d6e89>] ? _spin_unlock_irqrestore+0x39/0x70 [ 295.002046] [<f899e357>] rfcomm_run+0xe7/0x550 [rfcomm] [ 295.002046] [<c03d4559>] ? __sched_text_start+0x229/0x4c0 [ 295.002046] [<c0120000>] ? cpu_avg_load_per_task+0x20/0x30 [ 295.002046] [<f899e270>] ? rfcomm_run+0x0/0x550 [rfcomm] [ 295.002046] [<c013c18c>] kthread+0x5c/0xa0 [ 295.002046] [<c013c130>] ? kthread+0x0/0xa0 [ 295.002046] [<c0105c07>] kernel_thread_helper+0x7/0x10 [ 295.002046] ======================= Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-01bluetooth : use lockdep sub-classes for diffrent bluetooth protocolDave Young
'rfcomm connect' will trigger lockdep warnings which is caused by locking diffrent kinds of bluetooth sockets at the same time. So using sub-classes per AF_BLUETOOTH sub-type for lockdep. Thanks for the hints from dave jones. --- > From: Dave Jones <davej@codemonkey.org.uk> > Date: Thu, 27 Mar 2008 12:21:56 -0400 > > > Mar 27 08:10:57 localhost kernel: Pid: 3611, comm: obex-data-serve Not tainted 2.6.25-0.121.rc5.git4.fc9 #1 > > Mar 27 08:10:57 localhost kernel: [__lock_acquire+2287/3089] __lock_acquire+0x8ef/0xc11 > > Mar 27 08:10:57 localhost kernel: [sched_clock+8/11] ? sched_clock+0x8/0xb > > Mar 27 08:10:57 localhost kernel: [lock_acquire+106/144] lock_acquire+0x6a/0x90 > > Mar 27 08:10:57 localhost kernel: [<f8bd9321>] ? l2cap_sock_bind+0x29/0x108 [l2cap] > > Mar 27 08:10:57 localhost kernel: [lock_sock_nested+182/198] lock_sock_nested+0xb6/0xc6 > > Mar 27 08:10:57 localhost kernel: [<f8bd9321>] ? l2cap_sock_bind+0x29/0x108 [l2cap] > > Mar 27 08:10:57 localhost kernel: [security_socket_post_create+22/27] ? security_socket_post_create+0x16/0x1b > > Mar 27 08:10:57 localhost kernel: [__sock_create+388/472] ? __sock_create+0x184/0x1d8 > > Mar 27 08:10:57 localhost kernel: [<f8bd9321>] l2cap_sock_bind+0x29/0x108 [l2cap] > > Mar 27 08:10:57 localhost kernel: [kernel_bind+10/13] kernel_bind+0xa/0xd > > Mar 27 08:10:57 localhost kernel: [<f8dad3d7>] rfcomm_dlc_open+0xc8/0x294 [rfcomm] > > Mar 27 08:10:57 localhost kernel: [lock_sock_nested+187/198] ? lock_sock_nested+0xbb/0xc6 > > Mar 27 08:10:57 localhost kernel: [<f8dae18c>] rfcomm_sock_connect+0x8b/0xc2 [rfcomm] > > Mar 27 08:10:57 localhost kernel: [sys_connect+96/125] sys_connect+0x60/0x7d > > Mar 27 08:10:57 localhost kernel: [__lock_acquire+1370/3089] ? __lock_acquire+0x55a/0xc11 > > Mar 27 08:10:57 localhost kernel: [sys_socketcall+140/392] sys_socketcall+0x8c/0x188 > > Mar 27 08:10:57 localhost kernel: [syscall_call+7/11] syscall_call+0x7/0xb --- Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-01[ROSE/AX25] af_rose: rose_release() fixJarek Poplawski
rose_release() doesn't release sockets properly, e.g. it skips sock_orphan(), so OOPSes are triggered in sock_def_write_space(), which was observed especially while ROSE skbs were kfreed from ax25_frames_acked(). There is also sock_hold() and lock_sock() added - similarly to ax25_release(). Thanks to Bernard Pidoux for substantial help in debugging this problem. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Reported-and-tested-by: Bernard Pidoux <bpidoux@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02[CRYPTO] xcbc: Fix crash when ipsec uses xcbc-mac with big data chunkJoy Latten
The kernel crashes when ipsec passes a udp packet of about 14XX bytes of data to aes-xcbc-mac. It seems the first xxxx bytes of the data are in first sg entry, and remaining xx bytes are in next sg entry. But we don't check next sg entry to see if we need to go look the page up. I noticed in hmac.c, we do a scatterwalk_sg_next(), to do this check and possible lookup, thus xcbc.c needs to use this routine too. A 15-hour run of an ipsec stress test sending streams of tcp and udp packets of various sizes, using this patch and aes-xcbc-mac completed successfully, so hopefully this fixes the problem. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-02selinux: handle files opened with flags 3 by checking ioctl permissionStephen Smalley
Handle files opened with flags 3 by checking ioctl permission. Default to returning FILE__IOCTL from file_to_av() if the f_mode has neither FMODE_READ nor FMODE_WRITE, and thus check ioctl permission on exec or transfer, thereby validating such descriptors early as with normal r/w descriptors and catching leaks of them prior to attempted usage. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-04-01V4L/DVB (7486): radio-cadet: wrap PNP probe code in #ifdef CONFIG_PNPBjorn Helgaas
Wrap PNP probe code in #ifdef CONFIG_PNP. Without this change, we'll have unresolved references to pnp_get_resource() function when CONFIG_PNP=n. (This is a new interface that's not in mainline yet.) Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01V4L/DVB (7485): v4l2-int-device.c: add MODULE_LICENSEAdrian Bunk
Now that it's in an own module it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01V4L/DVB (7466): Avoid minor model number warning when an OEM HVR1250 board ↵Steven Toth
is detected Avoid minor model number warning when an OEM HVR1250 board is detected. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01V4L/DVB (7465): Fix eeprom parsing and errors on the HVR1800 productsSteven Toth
On some models, the valid Hauppauge eeprom data begins at a different offset. This patch avoid unfriendly 'corrupt' eeprom errors during driver load. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01V4L/DVB (7464): Convert driver to use a single SRAM memory mapSteven Toth
This reduces the memory footprint and removes the need to manually configure each map, which lead to a bug where the Fusion EXP 5 board broke for a while. This also fixes digital support again for the DViCO FusionHDTV5Express. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01V4L/DVB (7461): bttv: fix missed index checkCyrill Gorcunov
We should check for proper index first Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01V4L/DVB (7400): bttv: Add a radio compat_ioctl file operationRobert Fitzsimons
Signed-off-by: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01V4L/DVB (7278): bttv: Re-enable radio tuner support for ↵Robert Fitzsimons
VIDIOCGFREQ/VIDIOCSFREQ ioctls Signed-off-by: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01V4L/DVB (7277): bttv: Re-enabling radio support requires the use of struct ↵Robert Fitzsimons
bttv_fh A number of the radio tuner ioctl functions are shared with the TV tuner, these functions require a struct bttv_fh data structure to be allocated and initialized. Signed-off-by: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01Linux 2.6.25-rc8Linus Torvalds
2008-04-01mac80211: correct use_short_preamble handlingVladimir Koutny
ERP IE bit for preamble mode is 0 for short and 1 for long, not the other way around. This fixes the value reported to the driver via bss_conf->use_short_preamble field. Signed-off-by: Vladimir Koutny <vlado@ksp.sk> Signed-off-by: John W. Linville <linville@tuxdriver.com>