aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-02-01USB: usb_serial_console: allocate fake tty and termios before calling driver ↵Aristeu Rozanski
open() method The usb serial method set_termios() is called for the first time from open() method in order to set up the termios structure with the default device's settings, ignoring the current settings. Once it's initialized, the next set_termios() calls will update the device with the tty->termios settings. Currently USB serial console code calls the driver open() method without a tty and after that will allocate a fake tty and termios so the command line arguments can be applied to the device (console=ttyUSB0,115200,...). This makes the driver overwrite the termios with the default settings and not applying the command line options. This patch changes usb_console_setup() to allocate the fake tty and termios before the open() method is called. Tested successfully with a pl2303 Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: usb_serial: clean tty reference in the last closeAristeu Rozanski
When a usb serial adapter is used as console, the usb serial console driver bumps the open_count on the port struct used but doesn't attach a real tty to it (only a fake one temporaly). If this port is opened later using the regular character device interface, the open method won't initialize the port, which is the expected, and will receive a brand new tty struct created by tty layer, which will be stored in port->tty. When the last close is issued, open_count won't be 0 because of the console usage and the port->tty will still contain the old tty value. This is the last ttyUSB<n> close so the allocated tty will be freed by the tty layer. The usb_serial and usb_serial_port are still in use by the console, so port_free() won't be called (serial_close() -> usb_serial_put() -> destroy_serial() -> port_free()), so the scheduled work (port->work, usb_serial_port_work()) will still run. And usb_serial_port_work() does: (...) tty = port->tty; if (!tty) return; tty_wakeup(tty); which causes (manually copied): Faulting instruction address: 0x6b6b6b68 Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT PowerMac Modules linked in: binfmt_misc ipv6 nfs lockd nfs_acl sunrpc dm_snapshot dm_mirror dm_mod hfsplus uinput ams input_polldev genrtc cpufreq_powersave i2c_powermac therm_adt746x snd_aoa_codec_tas snd_aoa_fabric_layout snd_aoa joydev snd_aoa_i2sbus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc pmac_zilog serial_core evdev ide_cd cdrom snd appletouch soundcore snd_aoa_soundbus bcm43xx firmware_class usbhid ieee80211softmac ff_memless firewire_ohci firewire_core ieee80211 ieee80211_crypt crc_itu_t sungem sungem_phy uninorth_agp agpart ssb NIP: 6b6b6b68 LR: c01b2108 CTR: 6b6b6b6b REGS: c106de80 TRAP: 0400 Not tainted (2.6.24-rc2) MSR: 40009032 <EE,ME,IR,DR> CR: 82004024 XER: 00000000 TASK = c106b4c0[5] 'events/0' THREAD: c106c000 GPR00: 6b6b6b6b c106df30 c106b4c0 c2d613a0 00009032 00000001 00001a00 00000001 GPR08: 00000008 00000000 00000000 c106c000 42004028 00000000 016ffbe0 0171a724 GPR16: 016ffcf4 00240e24 00240e70 016fee68 016ff9a4 c03046c4 c0327f50 c03046fc GPR24: c106b6b9 c106b4c0 c101d610 c106c000 c02160fc c1eac1dc c2d613ac c2d613a0 NIP [6b6b6b68] 0x6b6b6b68 LR [c01b2108] tty_wakeup+0x6c/0x9c Call Trace: [c106df30] [c01b20e8] tty_wakeup+0x4c/0x9c (unreliable) [c106df40] [c0216138] usb_serial_port_work+0x3c/0x78 [c106df50] [c00432e8] run_workqueue+0xc4/0x15c [c106df90] [c0043798] worker_thread+0xa0/0x124 [c106dfd0] [c0048224] kthread+0x48/0x84 [c106dff0] [c00129bc] kernel_thread+0x44/0x60 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX Slab corruption: size-2048 start=c2d613a0, len=2048 Redzone: 0x9f911029d74e35b/0x9f911029d74e35b. Last user: [<c01b16d8>](release_one_tty+0xbc/0xf4) 050: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Prev obj: start=c2d60b88, len=2048 Redzone: 0x9f911029d74e35b/0x9f911029d74e35b. Last user: [<c00f30ec>](show_stat+0x410/0x428) 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b This patch avoids this, clearing port->tty considering if the port is used as serial console or not Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: usb_serial_console: fix command line parsingAristeu Rozanski
Currently usb serial console support ignores the device and always use ttyUSB0. Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: cypress_cy7c63: updated contact/usage informationOliver Bock
here's a minor update to the cypress_cy7c63 driver providing new contact and usage information. From: Oliver Bock <bock@tfh-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: add Printer Gadget DriverCraig W. Nadler
G_PRINTER: Adds a USB printer gadget driver for use in printer firmware. This adds a USB printer gadget driver for use in printer firmware. The printer gadget channels data between the USB host and a userspace program driving the print engine. The user space program reads and writes the device file /dev/g_printer to receive or send printer data. It can use ioctl calls to the device file to get or set printer status. Signed-off-by: Craig W. Nadler <craig@nadler.us> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: usb-storage: new "lockable" subclass 0x07Alan Stern
This patch (as1011) adds a #define for the newly-created Lockable (i.e., password-protected) subclass 0x07 for USB mass-storage devices. The private ISD200 entry (which had been mapped to subclass 0x07) is moved to 0xf0, which is unlikely to conflict with any official subclass designation. The US_SC_MIN and US_SC_MAX constants aren't used anywhere, so the patch removes them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: Add missing "space" to printk messagesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: m66592-udc: Add support for SH7722 USBFYoshihiro Shimoda
Add support for SuperH SH7722 USB Function. M66592 is similar to SH7722 USBF. It can support SH7722 USBF by changing several M66592 code. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: TI 3410/5052 USB Serial: convert td_open_close_lock to mutexMatthias Kaehlcke
TI 3410/5052 USB Serial: convert semaphore td_open_close_lock to the mutex API. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: device DMA support on OMAP2Kyungmin Park
The current omap udc dosen't support the DMA mode and it has some problem at setup time on OMAP2 with previous patch file. I found that the code assumes bulk out required the big data transfer. But MODE SELECT(6) sent the only 24 bytes. it makes a problem. So I implement the small packets handling for it. It is tested with both linux and windows. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: David Brownell <david-b@pacbell.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: usb/mon/mon_bin.c: cleanupsAdrian Bunk
- make the needlessly global struct mon_fops_binary static - #if 0 the unused mon_bin_mmap() and related code Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg KH <greg@kroah.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: s3c2410_udc: minor irq handler cleanupsJeff Garzik
- 'irq' argument is merely used in place of a constant; replace its usage with that constant. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: David Brownell <david-b@pacbell.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: sisusb: *_ioctl32_conversion functions do not exist in recent kernelsFernando Luis Vázquez Cao
Remove dead code while at it. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: sis FB driver: *_ioctl32_conversion functions do not exist in recent ↵Fernando Luis Vazquez Cao
kernels Remove dead code while at it. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Greg KH <greg@kroah.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: add iuu_phoenix driverAlain Degreffe
Signed-off-by: Alain Degreffe <eczema@ecze.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: isd200: don't include <linux/ide.h>Bartlomiej Zolnierkiewicz
Now that commit 3794ade5b286cbd4551009dd341dbe9aeead2bc3 removed incorrect dependency on CONFIG_IDE we can fix the driver to not include <linux/ide.h>: * add ATA_REG_{ERROR,LCYL,HCYL,STATUS}_OFFSET defines and use them instead of IDE_{ERROR,LCYL,HCYL,STATUS}_OFFSET from <linux/ide.h> * remove no longer needed <linux/ide.h> include * remove incorrect comment added by the last commit: - isd200.c is not the only user of struct hd_driveid besides IDE (see drivers/block/xsysace.c and arch/um/drivers/ubd_kern.c) Cc: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: autosuspend for cdc-acmOliver Neukum
Here we go. This patch implements suspend/resume and autosuspend for the CDC ACM driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: Remove unnecessary zeroing from ubPete Zaitcev
These zeroings were taken from usb-storage long time ago. I examined the submission paths and usb_fill_bulk_urb and found them unnecessary. Signed-off-by: Pete Zaitcev <zaitcev@yahoo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: Convert from class_device to device for USB coreTony Jones
Convert from class_device to device for drivers/usb/core. Signed-off-by: Tony Jones <tonyj@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: handle idVendor of 0x0000Greg Kroah-Hartman
Some crazy devices in the wild have a vendor id of 0x0000. If we try to add a module alias with this id, we just can't do it due to a check in the file2alias.c file. Change the test to verify that both the vendor and product ids are 0x0000 to show a real "blank" module alias. Note, the module-init-tools package also needs to be changed to properly generate the depmod tables. Cc: Janusz <janumix@poczta.fm> Cc: stable <stable@kernel.org> Cc: Jon Masters <jcm@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01usb: fix usbtest halt check on big endian systemsJan Andersson
usbtest did not swap the received status information when checking for a non-zero value and failed to discover halted endpoints on big endian systems. Cc: stable <stable@kernel.org> Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: storage: Add unusual_dev for HP r707Grant Grundler
Add "FIX_CAPACITY" entry for HP Photosmart r707 Camera in "Disk" mode. Camera will wedge when /lib/udev/vol_id attempts to access the last sector, EIO gets reported to dmesg, and block device is marked "offline" (it is). Reproduced vol_id behavior with: "dd if=/dev/sda of=/dev/null skip=60800 count=1" Cc: stable <stable@kernel.org> Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: Variant of the Dell Wireless 5520 driverNate Carlson
I've got a Dell wireless 5520 card with a different USB ID - specifically, 8136 instead of 8137. Attached a small patch to add support, and the output of an 'ati3'. If we could get this in, that'd be sweet. ;) Thanks! nc@knight:~/tmp/linux-2.6.24-rc8/drivers/usb/serial$ lsusb | grep 8136 Bus 001 Device 005: ID 413c:8136 Dell Computer Corp. nc@knight:~/tmp/linux-source-2.6.23/drivers/usb/serial$ cu -l ttyUSB0 -s 115200 Connected. ati3 Manufacturer: Novatel Wireless Incorporated Model: Expedite EU860D MiniCard Revision: 10.10.04.01-01 [2007-04-11 14:07:19] IMEI: 011186000228043 +GCAP: +CGSM,+DS,+ES From: Nate Carlson <natecars@natecarlson.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: use GFP_NOIO in reset pathOliver Neukum
this function will run in the context of the scsi error handler thread. It must use GFP_NOIO instead of GFP_KERNEL to avoid a possible deadlock. Cc: stable <stable@kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: ftdi driver - add support for optical probe deviceEd Beroset
Added support for the Elster Unicom III Optical Probe. The device ID has already been added to the usb.ids file. Cc: stable <stable@kernel.org> Signed-off-by: Ed Beroset <beroset@mindspring.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: pl2303: add support for RATOC REX-USB60FAkira Tsukamoto
pl2303: add support for RATOC REX-USB60F This patch adds support for RATOC REX-USB60F Serial Adapters, which is widely used in Japan recently. Cc: stable <stable@kernel.org> Signed-off-by: Akira Tsukamoto <akirat@rd.scei.sony.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: remove duplicate entry in Option driver and Pl2303 driver for Huawei modemDaniel Kozák
Remove entry for Huawei E620 UMTS/HSDPA card (ID: 12d1:1001) in pl2303 driver Option driver is use instead Cc: stable <stable@kernel.org> Signed-off-by: Daniel Kozák <kozzi11@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: sierra: add support for Onda H600/Zte MF330 datacard to USB Driver for ↵Bruno Redondi
Sierra Wireless Added support for Onda H600/Zte MF330 GPRS/UMTS/HSDPA datacard Cc: stable <stable@kernel.org> Signed-off-by: Bruno Redondi <bruno.redondi@altarisoluzione.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: ftdi-sio: Patch to add vendor/device id for ATK_16IC CCDFranco Lanza
little patches only to add vendor/device id of ATK_16IC CCD cam for astronomy. From: Franco Lanza <nextime@nexlab.it> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: ftdi_sio - enabling multiple ELV devices, adding EM1010PCPeter Stark
I work with a group of people on a free home automation tool called FHEM. Some of the users own more than one USB-serial device by ELV. The ftdi_sio driver has most of the ELV devices disabled by default and needs to be re-enabled every time you get a new kernel. Additionally a new device (EM 1010 PC - enegry monitor) is missing in the list. Currently our users have to follow the instructions we provide at http://www.koeniglich.de/fhem/linux.html ... However, to some users it is too complicated to compile their own kernel module. We are aware that you can specify one additional device using the vendor/product option of the module. But lot's of users own more than one device. Cc: stable <stable@kernel.org> Signed-off-by: Peter Stark <peter.stark@t-online.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB : correct comments in usb/core/notify.cManish Katiyar
This patch corrects the wrong function name mentioned in the comments of usb_unregister_notify function. Signed-off-by: Manish Katiyar <mkatiyar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: sierra driver - add devicesKevin Lloyd
The following improvements were made: - Added new product support: MC5725, AC 880 U, MP 3G (UMTS & CDMA) Cc: stable <stable@kernel.org> Signed-off-by: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: Adding YC Cable USB Serial device to pl2303Damien Stuart
This simply adds the "YC Cable" as a vendor and its pl2303-based USB<->Serial adapter as a product. This particular adapter is sold by Radio Shack. I've done limited testing on a few different systems with no issues. Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: Sierra - Add support for Aircard 881UJessica L. Blank
Adds the appropriate vendor and device IDs for the AirCard 881U to sierra.c. (This device is often rebadged by AT&T as the USBConnect 881). Cc: stable <stable@kernel.org> Signed-off-by: Jessica L Blank <j@twu.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: add support for 4348:5523 WinChipHead USB->RS 232 adapterPiotr Roszatycki
add support for: 4348:5523 WinChipHead USB->RS 232 adapter with Prolifec PL 2303 chipset [ mingo@elte.hu: merged it and nursed it upstream ] Cc: stable <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: CP2101 New Device IDsCraig Shelley
Six new device IDs for CP2101 driver. Cc: stable <stable@kernel.org> Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01usb gadget: fix fsl_usb2_udc potential OOPSLi Yang
For fsl_usb2_udc driver, ep0 also has a descriptor. Current code is misleading and contains a logical mistake. Here is the patch to fix it. http://bugzilla.kernel.org/show_bug.cgi?id=9595 Cc: stable <stable@kernel.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: keyspan: Fix oopsAlan Cox
If we get a data URB back from the hardware after we have put the tty to bed we go kaboom. Fortunately all we need to do is process the URB without trying to ram its contents down the throat of an ex-tty. Cc: stable <stable@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: kill swap_io_context() as-iosched: fix inconsistent ioc->lock context ide-cd: fix leftover data BUG block: make elevator lib checkpatch compliant cfq-iosched: make checkpatch compliant block: make core bits checkpatch compliant block: new end request handling interface should take unsigned byte counts unexport add_disk_randomness block/sunvdc.c:print_version() must be __devinit splice: always updated atime in direct splice
2008-02-01block: kill swap_io_context()Jens Axboe
It blindly copies everything in the io_context, including the lock. That doesn't work so well for either lock ordering or lockdep. There seems zero point in swapping io contexts on a request to request merge, so the best point of action is to just remove it. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-01docbook: rapidio: fix fatal filename errorRandy Dunlap
Fix docbook fatal error (files were renamed): docproc: linux-2.6.24-git9/arch/ppc/kernel/rio.c: No such file or directory Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01fix directory entry in arch-x86-MakefileSteven Rostedt
Doing a make randconfig I came across this error in the Makefile. This patch makes a directory out of arch/x86/mach-default for CONFIG_X86_RDC321X Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix inconsistent .section usage in lib/ [SPARC/SPARC64]: Fix usage of .section .sched.text in assembler code.
2008-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (173 commits) [NETNS]: Lookup in FIB semantic hashes taking into account the namespace. [NETNS]: Add a namespace mark to fib_info. [IPV4]: fib_sync_down rework. [NETNS]: Process interface address manipulation routines in the namespace. [IPV4]: Small style cleanup of the error path in rtm_to_ifaddr. [IPV4]: Fix memory leak on error path during FIB initialization. [NETFILTER]: Ipv6-related xt_hashlimit compilation fix. [NET_SCHED]: Add flow classifier [NET_SCHED]: sch_sfq: make internal queues visible as classes [NET_SCHED]: sch_sfq: add support for external classifiers [NET_SCHED]: Constify struct tcf_ext_map [BLUETOOTH]: Fix bugs in previous conn add/del workqueue changes. [TCP]: Unexport sysctl_tcp_tso_win_divisor [IPV4]: Make struct ipv4_devconf static. [TR] net/802/tr.c: sysctl_tr_rif_timeout static [XFRM]: Fix statistics. [XFRM]: Remove unused exports. [PKT_SCHED] sch_teql.c: Duplicate IFF_BROADCAST in FMASK, remove 2nd. [BNX2]: Fix ASYM PAUSE advertisement for remote PHY. [IPV4] route cache: Introduce rt_genid for smooth cache invalidation ...
2008-02-01pasemi: Fix thinko in dma_direct_ops setupOlof Johansson
[POWERPC] pasemi: Fix thinko in dma_direct_ops setup The first patch will just fall through and still set dma_data to a bad value, make it return directly instead. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: remove dead timer int pending codeGreg Ungerer
Remove all the dead timer interrupt checking functions for the ColdFire CPU "timers" hardware that are not used after switching to GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: remove empty timer offset function for 68360Greg Ungerer
Switching to GENERIC_TIME means we no longer need the empty timer offset function for the 68360 CPU. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: remove local gettimeofday codeGreg Ungerer
Remove unused local gettimeofday functions, now that we are using GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: set config to use GENERIC_TIMEGreg Ungerer
Switch m68knommu arch to using GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: switch ColdFire TIMER to use GENERIC_TIMEGreg Ungerer
Switch the ColdFire TIMER timer to use GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>