aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-09-07drm/kms: remove old std mode fallback code.Dave Airlie
The new code adds modes in the helper, which makes more sense I disliked the non-driver code adding modes. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07drm/kms/i915: Add the default mode for CRT output without EDIDykzhao
Add the default mode for every output device when there is no mode for it. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07drm/kms: add a function that can add the mode for the output device without EDIDZhao Yakui
Add a function that can be used to add the default mode for the output device without EDID. It will add the default mode that meets with the requirements of given hdisplay/vdisplay limit. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07drm/kms: try to find the std mode in DMT tableZhao Yakui
When we need to add the standard timing mode, we will firstly check whether it can be found in DMT table by comparing the hdisplay/vdisplay/vfresh_rate. If it can't be found, then we will use the cvt/gtf to add the required mode. If it can be found, it will be returned. At the same time the function of drm_mode_vrefresh is also fixed. It will return the result of actual refresh_rate plus 0.5. For example: When the calculated value is 84.9, then the fresh_rate is 85. When the calculated value is 70.02, then the fresh_rate is 70. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07drm/kms: Add the default mode tableZhao Yakui
When we add a standard timing mode in UMS, we will first check whether it can be found in default mode table. If it can't be found, then we will use cvt/gtf to add the standard timing mode. Add the default mode table so that we can check whether the given mode can be found in the default mode table as what we have done in UMS mode. If the status of one output device is connected but there is no EDID, it will have no correct mode. In such case we can add some default modes for it. Of course we only add the modes in the default modes list that visible part is not greater than 1024x768. The default mode is autogenerated from the DMT spec. And it is copied from xserver/hw/xfree86/modes/xf86EdidModes.c. But the mode with reduced blank feature is removed. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07drm: split crtc/fb helpers into a separate moduleDave Airlie
I really don't want to have core drm module rely on CONFIG_FB, so this is the easiest answer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07drm/radeon/kms: add updated registers from drm-fixes.Dave Airlie
Fixes up the DISCARD + 2 sided stencil in the new generator scripts. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07drm/radeon/kms: block depthxy offset from use from userspace.Dave Airlie
This could be used to bypass CS checks. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-02drm/crtc_helper: avoid NULL-pointer dereference when encoder is NULLMaarten Maathuis
Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-09-02drm/crtc: fix mismerge of last patch.Dave Airlie
We only want to NULL encoder->crtc when it is off. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-02drm/kms: add explicit encoder disable function and detach harder.Dave Airlie
For shared tv-out and VGA encoders, we really need to know if the encoder is just being switched off temporarily in blanking or if we are really disabling it hard. Also we need to try harder to disconnect encoders from unused connectors so we can share more efficently. (shared encoders stuff is coming in radeon tv-out support) Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-02drm: fix drm_cache.c for arch with no support.Dave Airlie
This produces a warn on for architectures where this gets called but we don't have a cache flushing implementation suitable. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-02drm/mm: add ability to dump mm lists via debugfsDave Airlie
This adds code to the drm_mm to talk to debugfs, and adds support to radeon to add the VRAM and GTT mm lists to debugfs. I tested with spinlock debugging and it doesn't give out. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31drm: fix two issues with fb consolidation.Dave Airlie
Set accel to none, we really don't want anyone thinking fb is an accel interface. Pass pitch not depth to function for intel. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31drm: use proc_create_data()Alexey Dobriyan
airlied: fixup race against drm info by filling out tmp before adding it to proc. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31drm/kms: Parse the detailed time info in CEA-EDIDZhao Yakui
Sometimes we can obtain the EDID with multiple blocks from the display device. For example: HDMI monitor. When the CEA-EDID block is detected, we should also parse the detailed timing info from it. Otherwise we will lose some modes for the display device. The first step is check whether the CEA EDID block is found. If it exists, it will skip the CEA-data block and parse the detailed timing info. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31drm/kms: move driver specific fb common code to helper functions (v2)Dave Airlie
Initially I always meant this code to be shared, but things ran away from me before I got to it. This refactors the i915 and radeon kms fbdev interaction layers out into generic helpers + driver specific pieces. It moves all the panic/sysrq enhancements to the core file, and stores a linked list of kernel fbs. This could possibly be improved to only store the fb which has fbcon on it for panics etc. radeon retains some specific codes used for a big endian workaround. changes: fix oops in v1 fix freeing path for crtc_info Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31drm/r128: Add test for initialisation to all ioctls that require itBen Hutchings
Almost all r128's private ioctls require that the CCE state has already been initialised. However, most do not test that this has been done, and will proceed to dereference a null pointer. This may result in a security vulnerability, since some ioctls are unprivileged. This adds a macro for the common initialisation test and changes all ioctl implementations that require prior initialisation to use that macro. Also, r128_do_init_cce() does not test that the CCE state has not been initialised already. Repeated initialisation may lead to a crash or resource leak. This adds that test. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31radeon: Use request_firmware()Ben Hutchings
Loosely based on a patch by Jaswinder Singh Rajput <jaswinderlinux@gmail.com>. KMS support by Dave Airlie <airlied@redhat.com>. For Radeon 100- to 500-series, firmware blobs look like: struct { __be32 datah; __be32 datal; } cp_ucode[256]; For Radeon 600-series, there are two separate firmware blobs: __be32 me_ucode[PM4_UCODE_SIZE * 3]; __be32 pfp_ucode[PFP_UCODE_SIZE]; For Radeon 700-series, likewise: __be32 me_ucode[R700_PM4_UCODE_SIZE]; __be32 pfp_ucode[R700_PFP_UCODE_SIZE]; Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31drm: dereference of tmp in drm_proc_create_files()Roel Kluin
tmp allocation may fail, prevent a dereference. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31drm/crtc_helper: NULL encoder->crtc when switching encodersMaarten Maathuis
- Previously the old encoder would be called during modeset and without a connector bad things happened. Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31drm/crtc_helper: place drm_helper_encoder_in_use() in the header fileMaarten Maathuis
- The symbol was already exported. Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31drm/crtc_helper: replace modeset fail path with something simplerMaarten Maathuis
- The previous system was not very transparent, nor flexible. - This is needed to be able to fix a few bugs in the mechanism. Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31drm/radeon: cleanup mkregtable.cDave Airlie
This cleans up the code in mkregtable.c to be more kernel style. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-27drm: GEM handles are u32, not intPekka Paalanen
Several functions in the GEM kernel API used int as handle type, but user API has it __u32 which is also the intended type. Replace int with u32. Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-27drm/rs600/690: use autogenerated safe register tables.Dave Airlie
This ports rs690 to the safe reg tables and makes rs600 also use the same table. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-27drm/r128: Use request_firmware() to load CCE microcodeBen Hutchings
Firmware blob looks like this: __be32 datah __be32 datal Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-27drm/mga: Use request_firmware() to load microcodeBen Hutchings
Image format is IHEX, one record for each pipe in order (record addresses are ignored). Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-27drm/ttm: consolidate cache flushing code in one place.Dave Airlie
This merges the TTM and drm cache flushing into one file in the drm core. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21drm/radeon/kms: generate the safe register tables.Dave Airlie
Previously we just made these offline and included them, but no reason we can't generate them at build time. TODO: add rs690 + r100/r200 when done. should we do rs480/rs690 no tcl version? Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-20drm/ttm: Fixes for "Memory accounting rework."Thomas Hellstrom
ttm: Fix error paths when kobject_add returns an error. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-20drm/ttm: Fixes for "Make parts of a struct ttm_bo_device global"Thomas Hellstrom
ttm: Remove a stray debug printout. Remove a re-init of the lru spinlock at device init. radeon: Fix the size of the bo_global allocation. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-20Merge Linus master to drm-nextDave Airlie
linux-next conflict reported needed resolution. Conflicts: drivers/gpu/drm/drm_crtc.c drivers/gpu/drm/drm_edid.c drivers/gpu/drm/i915/intel_sdvo.c drivers/gpu/drm/radeon/radeon_ttm.c drivers/gpu/drm/ttm/ttm_bo.c
2009-08-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix oopses with doubly mounted snapshots nilfs2: missing a read lock for segment writer in nilfs_attach_checkpoint()
2009-08-19AFS: Documentation updatesAnton Blanchard
Fix some issues with the AFS documentation, found when testing AFS on ppc64: - Update AFS features: reading/writing, local caching - Typo in kafs sysfs debug file - Use modprobe instead of insmod in example - Update IPs for grand.central.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-19Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/kms: teardown crtc correctly when fb is destroyed. drm/kms/radeon: cleanup combios TV table like DDX. drm/radeon/kms: memset the allocated framebuffer before using it. drm/radeon/kms: although LVDS might be possible on crtc 1 don't do it. drm/radeon/kms: implement bo busy check + current domain drm/radeon/kms: cut down indirects in register accesses. drm/radeon/kms: Fix up vertical blank interrupt support. drm/radeon/kms: add rv530 R300_SU_REG_DEST + reloc for ZPASS_ADDR drm/edid: fixup detailed timings like the X server. drm/radeon/kms: Add specific rs690 authorized register table
2009-08-19Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Update Microblaze defconfigs microblaze: Use klimit instead of _end for memory init microblaze: Enable ppoll syscall microblaze: Sane handling of missing timer/intc in device tree microblaze: use the generic ack_bad_irq implementation
2009-08-19Merge branch 'perfcounters-fixes-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Make 'make html' work perf annotate: Fix segmentation fault perf_counter: Fix the PARISC build perf_counter: Check task on counter read IPI perf: Rename perf-examples.txt to examples.txt perf record: Fix typo in pid_synthesize_comm_event
2009-08-19ttm: Make parts of a struct ttm_bo_device global.Thomas Hellstrom
Common resources, like memory accounting and swap lists should be global and not per device. Introduce a struct ttm_bo_global to accomodate this, and register it with sysfs. Add a small sysfs interface to return the number of active buffer objects. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-08-19drm/ttm: Memory accounting rework.Thomas Hellstrom
Use inclusive zones to simplify accounting and its sysfs representation. Use DMA32 accounting where applicable. Add a sysfs interface to make the heuristically determined limits readable and configurable. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-08-19drm/ttm: Add a virtual ttm sysfs device.Thomas Hellstrom
The device directory will be the base directory of the sysfs representation of other ttm subsystems. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-08-19drm: Enable drm drivers to add drm sysfs devices.Thomas Hellstrom
Export utility functions for drivers to add specialized devices in the sysfs drm class subdirectory. Initially this will be needed form TTM to add a virtual device that handles power management. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-08-19drm/ttm: optimize bo_kmap_type valuesPekka Paalanen
A micro-optimization on the function ttm_kmap_obj_virtual(). By defining the values of enum ttm_bo_kmap_obj::bo_kmap_type to have a bit indicating iomem, size of the function ttm_kmap_obj_virtual() will be reduced by 16 bytes on x86_64 (gcc 4.1.2). ttm_kmap_obj_virtual() may be heavily used, when buffer objects are accessed via wrappers, that work for both kinds of memory addresses: iomem cookies and kernel virtual. Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm/kms: no need to return void value (encoder)Pekka Paalanen
Cc: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm: clarify scaling property namesJesse Barnes
Now that we're using the scaling property in the Intel driver I noticed that the names were a bit confusing. I've corrected them according to our discussion on IRC and the mailing list, though I've left out potential new additions for a new scaling property with an integer (or two) for the scaling factor. None of the drivers implement that today, but if someone wants to do it, I think it could be done with the addition of a single new type and a new property to describe the scaling factor in the X and Y directions. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm: fixup includes in encoder slave header files.Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm: remove root requirement from DRM_IOCTL_SET_VERSION (+ DRM_IOCTL_AUTH_MAGIC)Jesse Barnes
Just a DRM_MASTER flag is sufficient here, though maybe this call is totally deprecated anyway (xf86-video-intel still calls it though). (airlied: drop ioctl auth_magic as discussed on mailing list also) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm/kms: teardown crtc correctly when fb is destroyed.Dave Airlie
If userspace destroys a framebuffer that is in use on a crtc, don't just null it out, tear down the crtc properly so the hw gets turned off. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm/kms/radeon: cleanup combios TV table like DDX.Dave Airlie
The fallback case wasn't getting executed properly if there was no TV table, which my T42 M7 hasn't got. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm/radeon/kms: memset the allocated framebuffer before using it.Dave Airlie
This gets rid of some ugliness, we shuold probably find a way for the GPU to zero this. Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 16:50:23 +0000