aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-09-17MIPS: Loongson: pm: clean up the reboot supportWu Zhangjin
Several magic numbers have been replaced by relative macros, which will be more readable and understandable. Signed-off-by: Wu Zhangjin <wuzj@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Loongson: pm: Remove redundant source codeWu Zhangjin
The implmentation of loongson2e_power_off and loongson2e_halt is almostly the same, just preserve one of them. Signed-off-by: Wu Zhangjin <wuzj@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Loongson: Add new early_printk implmentationWu Zhangjin
This patch is based on the implementation in the lm2e-fixes branch of Philippe's git://git.linux-cisco.org/linux-mips.git and the malta-specific early_printk implementation. Signed-off-by: Wu Zhangjin <wuzj@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Loongson: Remove out-of-date board-specific kgdb source codeWu Zhangjin
Since the re-implementation of kgdb by commit 8854700115ecf8aa6f087aa915b7b6cf18090d39 the platform-specific version has become superfluous, remove it. Signed-off-by: Wu Zhangjin <wuzj@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Loongson: Remove existing early_printk implementationWu Zhangjin
Removes the existing implementation of early_printk for fulong. The old implementation was based on the outdated board-specific dbg_io.c. Since commit 8d60a903d986ffa26c41f0092320a3b9da20bfaf dbg_io.c is not longer needed; it will be removed by the next patch, and a new implementation of early_printk will be added later. Signed-off-by: Wu Zhangjin <wuzj@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: IP22, IP28: Build with -WerrorRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: FW: Build with -WerrorRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Fulong: Convert reset initialization to initcall.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Malta: Convert reset initialization to initcall.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Get rid of duplicate cpu_idle() prototype.Ralf Baechle
Since 2.6.11-rc1 there is a prototype in <linux/smp.h>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: TXx9: Fix error handling.Julia Lawall
Error handling code following a kzalloc should free the allocated data. Error handling code following an ioremap should iounmap the allocated data. The semantic match that finds the first problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: TXx9: Disable PM capability of TX493[89] internal etherAtsushi Nemoto
Some TC35815 variants (i.e. TX493[89] internal ether) report existance of PM registers though they are not supported. Disable PM features by clearing pdev->pm_cap. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: make page.h constants available to assembly.Nelson Elhage
page.h includes ifndef __ASSEMBLY__ guards, but PAGE_SIZE and some other constants are defined using "1UL", which the assembler does not support. Use the _AC macro from const.h to make them available to assembly (and linker scripts). Signed-off-by: Nelson Elhage <nelhage@ksplice.com> Signed-off-by: Tim Abbott <tabbott@ksplice.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Alchemy: add gpio_request/gpio_free stubs for CONFIG_GPIOLIB=nManuel Lauss
Some drivers use gpio_request/gpio_free regardless of whether gpiolib is actually built; add stubs to work around the ensuing compile failures. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Lasat: Fix compilationAlexey Dobriyan
Header needed for current_cpu_data which expands to smp_processor_id(). However, linux/smp.h can't be included into asm/cpu-info.h due to horrible circular dependencies, so plug it here. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Octeon: Check all CCAs in cvmx_write_csr.David Daney
The current code only checks CCA of 0 when deciding if a dummy read is needed. Since the kernel can (and does) use other CCAs we need to mask out the CCA bits from the address. Since the address constant now fits in 16 bits, there is an added benefit that smaller code is generated. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Octeon: False positive timeoutRoel Kluin
If we reach the test just below the loop with a `timeout' value of 0, this does not mean that the timeout caused the loop to end, but rather the `smi_rd.s.pending', in the last iteration. If timeout caused the loop to end, then `timeout' is -1, not 0. Since this can occur only in the last iteration, it is not very likely to be a problem. By changing the post- to prefix decrement we ensure that a timeout of 0 does mean it timed out. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Fix potencial build error in <asm/delay.h>Ralf Baechle
<asm/delay.h> will break if HZ isn't defined. In 2.6.26 and later we're usually lucky ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17be2net: fix some cmds to use mccq instead of mboxSathya Perla
All cmds issued to BE after the creation of mccq must now use the mcc-q (and not mbox) to avoid a hw issue that results in mbox poll timeout. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-17atl1e: fix 2.6.31-git4 -- ATL1E 0000:03:00.0: DMA-API: device driver frees DMAJie Yang
use the wrong API when free dma. So when map dma use a flag to demostrate whether it is 'pci_map_single' or 'pci_map_page'. When free the dma, check the flags to select the right APIs('pci_unmap_single' or 'pci_unmap_page'). set the flags type to u16 instead of unsigned long on David's comments. Signed-off-by: Jie Yang <jie.yang@atheros.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-17pkt_sched: Fix qstats.qlen updating in dump_statsJarek Poplawski
Some classful qdiscs miss qstats.qlen updating with q.qlen of their child qdiscs in dump_stats methods. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-17ipv6: Log the affected address when DAD failure occursJens Rosenboom
If an interface has multiple addresses, the current message for DAD failure isn't really helpful, so this patch adds the address itself to the printk. Signed-off-by: Jens Rosenboom <me@jayr.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-17wl12xx: Fix print_mac() conversion.David S. Miller
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-17Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: check NB MCE bank enable on the current node properly amd64_edac: Rewrite unganged mode code of f10_early_channel_count amd64_edac: cleanup amd64_check_ecc_enabled x86, EDAC: Provide function to return NodeId of a CPU amd64_edac: build driver only on AMD hardware
2009-09-17Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (39 commits) xfs: includecheck fix for fs/xfs/xfs_iops.c xfs: switch to seq_file xfs: Record new maintainer information xfs: use correct log reservation when handling ENOSPC in xfs_create xfs: xfs_showargs() reports group *and* project quotas enabled xfs: un-static xfs_inobt_lookup xfs: actually enable the swapext compat handler xfs: simplify xfs_trans_iget xfs: merge fsync and O_SYNC handling xfs: speed up free inode search xfs: rationalize xfs_inobt_lookup* xfs: untangle xfs_dialloc xfs: factor out debug checks from xfs_dialloc and xfs_difree xfs: improve xfs_inobt_update prototype xfs: improve xfs_inobt_get_rec prototype xfs: factor out inode initialisation fs/xfs: Correct redundant test xfs: remove XFS_INO64_OFFSET un-static xfs_read_agf xfs: add more statics & drop some unused functions ...
2009-09-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (75 commits) Blackfin: update ftrace for latest toolchain Blackfin: fix elf_fpregset_t definition Blackfin: unify cache init functions Blackfin: swap clocksource ratings for gptimer/cycles Blackfin: update ftrace_push_return_trace() breakage Blackfin: update cm board resources Blackfin: cm-bf537u: split board from cm-bf537e Blackfin: bf538-ezkit: add SPI IRQ resources Blackfin: increase default async timings for parallel flashes Blackfin: add ICPLB coverage for async banks Blackfin: use KERN_ALERT in all kgdb_test output Blackfin: fix BF54x SPI CS resources Blackfin: fix typo in isram_write() Blackfin: bf537-stamp: add adp5588 gpio resources Blackfin: add some isram-driver self tests Blackfin: workaround anomaly 05000283 Blackfin: fix spelling in a few comments Blackfin: use raw_smp_processor_id() in exception code Blackfin: remove useless duplicated assignment in gpio code Blackfin: Fix link errors with binutils 2.19 and GCC 4.3 ...
2009-09-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (53 commits) m68knommu: Make PAGE_SIZE available to assembly files. m68knommu: fix ColdFire definition of CLOCK_TICK_RATE m68knommu: set multi-function pins for ethernet when enabled m68knommu: remove special interrupt handling code for ne2k support m68knommu: relax IO_SPACE_LIMIT setting m68knommu: remove ColdFire direct interrupt register access m68knommu: create a speciailized ColdFire 5272 interrupt controller m68knommu: add support for second interrupt controller of ColdFire 5249 m68knommu: clean up old ColdFire timer irq setup m68knommu: map ColdFire interrupts to correct masking bits m68knommu: clean up ColdFire 532x CPU timer setup m68knommu: simplify ColdFire "timers" clock initialization m68knommu: support code to mask external interrupts on old ColdFire CPU's m68knommu: merge old ColdFire interrupt controller masking macros m68knommu: remove duplicate ColdFire mcf_autovector() code m68knommu: move ColdFire INTC definitions to new include file m68knommu: mask off all interrupts in ColdFire intc-simr controller m68knommu: remove timer device interrupt setup for ColdFire 532x m68knommu: remove interrupt masking from ColdFire pit timer m68knommu: remove unecessary interrupt level setting in ColdFire 520x setup ...
2009-09-17Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (lm85) Don't bind to Winbond/Nuvoton WPCD377I hwmon: (pcf8591) Documentation clean-ups hwmon: Clearly mark ACPI drivers as such hwmon: Use resource_size hwmon: Include <linux/io.h> instead of <asm/io.h> hwmon: (tmp421) Add documentation hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips hwmon-vid: Ignore 6th VID pin of AMD family 0Fh processors hwmon: (asus_atk0110) Add maintainer information hwmon: (abituguru3) Support multiple DMI strings per chip ID
2009-09-17Merge branch 'for-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb * 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: avoid radio controller reset loops uwb: stop uwbd thread if rc->start() fails uwb: handle radio controller events with out-of-range IDs correctly
2009-09-17ALSA: hda - Fix MSI GX620 mixerTakashi Iwai
The headphone and speaker mixer elements aren't properly set for MSI GX620 with targa-8ch-dig quirk. Also fixed the speaker volume control for other ALC883-targa quirks, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-17ext4: replace MAX_DEFRAG_SIZE with EXT_MAX_BLOCKEric Sandeen
There's no reason to redefine the maximum allowable offset in an extent-based file just for defrag; EXT_MAX_BLOCK already does this. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-17regulator: Voltage count for AB3100Linus Walleij
This sets the number of voltages for the AB3100 regulators so that they play well with the voltage listing functions and can be used properly with the MMC regulator integration glue for example. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: Convert WM8350 to use request_threaded_irq()Mark Brown
Instead of hand rolling our own variant. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: Update MAINTAINERS patterns for WM831xMark Brown
The WM831x PMICs added a backlight driver and a new include directory. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17ext4: Fix the alloc on close after a truncate hueristicTheodore Ts'o
In an attempt to avoid doing an unneeded flush after opening a (previously non-existent) file with O_CREAT|O_TRUNC, the code only triggered the hueristic if ei->disksize was non-zero. Turns out that the VFS doesn't call ->truncate() if the file doesn't exist, and ei->disksize is always zero even if the file previously existed. So remove the test, since it isn't necessary and in fact disabled the hueristic. Thanks to Clemens Eisserer that he was seeing problems with files written using kwrite and eclipse after sudden crashes caused by a buggy Intel video driver. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-17sched: Fix SD_POWERSAVING_BALANCE|SD_PREFER_LOCAL vs SD_WAKE_AFFINEPeter Zijlstra
The SD_POWERSAVING_BALANCE|SD_PREFER_LOCAL code can break out of the domain iteration early, making us miss the SD_WAKE_AFFINE bits. Fix this by continuing iteration until there is no need for a larger domain. This also cleans up the cgroup stuff a bit, but not having two update_shares() invocations. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-17sched: Stop buddies from hogging the systemPeter Zijlstra
Clear buddies more agressively. The (theoretical, haven't actually observed any of this) problem is that when we do not select either buddy in pick_next_entity() because they are too far ahead of the left-most task, we do not clear the buddies. This means that as soon as we service the left-most task, these same buddies will be tried again on the next schedule. Now if the left-most task was a pure hog, it wouldn't have done any wakeups and it wouldn't have set buddies of its own. That leads to the old buddies dominating, which would lead to bad latencies. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-17sched: Add new wakeup preemption mode: WAKEUP_RUNNINGPeter Zijlstra
Create a new wakeup preemption mode, preempt towards tasks that run shorter on avg. It sets next buddy to be sure we actually run the task we preempted for. Test results: root@twins:~# while :; do :; done & [1] 6537 root@twins:~# while :; do :; done & [2] 6538 root@twins:~# while :; do :; done & [3] 6539 root@twins:~# while :; do :; done & [4] 6540 root@twins:/home/peter# ./latt -c4 sleep 4 Entries: 48 (clients=4) Averages: ------------------------------ Max 4750 usec Avg 497 usec Stdev 737 usec root@twins:/home/peter# echo WAKEUP_RUNNING > /debug/sched_features root@twins:/home/peter# ./latt -c4 sleep 4 Entries: 48 (clients=4) Averages: ------------------------------ Max 14 usec Avg 5 usec Stdev 3 usec Disabled by default - needs more testing. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <new-submission>
2009-09-17sched: Fix TASK_WAKING & loadaverage breakageIngo Molnar
Fix this: top - 21:54:00 up 2:59, 1 user, load average: 432512.33, 426421.74, 417432.74 Which happens because we now set TASK_WAKING before activate_task(). Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-17mfd: Fix twl4030-power warningsSamuel Ortiz
KEY_1 and KEY_2 definitions conflicts with include/linux/input.h Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17regulator: AB3100 supportLinus Walleij
This adds support for the regulators found in the AB3100 Mixed-Signal IC. It further also defines platform data for the ST-Ericsson U300 platform and extends the AB3100 MFD driver so that platform/board data with regulation constraints and an init function can be passed down all the way from the board to the regulators. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17rtc: AB3100 RTC supportLinus Walleij
This adds support for the RTC found inside the AB3100 Mixed Signal chip. The symbols used for communicating with the chip is found in the mfd/ab3100-core.c driver that also provides the platform device. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: Fix ab3100-otp build failureSamuel Ortiz
ab3100.h should include linux/workqueue.h for otp to build properly. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: OMAP: Board-specifc twl4030 DPS scripts for RX51 boardAmit Kucheria
Add support for Dynamic Power Switching (DPS) for the RX51 board. These scripts are still a work-in-progress. I'll keep sending patches to update the scripts as they are optimised. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: Print warning for twl4030 out-of-order script loadingAmit Kucheria
When the sleep script is loaded before the wakeup script, there is a chance that the system might go to sleep before the wakeup script loading is completed. This will lead to a system that does not wakeup and has been observed to cause non-booting boards. Various options were considered to solve this problem, including modification of the core twl4030 power code to be smart enough to reorder the loading of the scripts. But it felt too over-engineered. Hence this patch just warns the DPS script developer so that they may be reordered in the board-code itself. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: Add support for TWL4030/5030 dynamic power switchingAmit Kucheria
The TWL4030/5030 family of multifunction devices allows board-specific control of the the various regulators, clock and reset lines through 'scripts' that are loaded into its memory. This allows for Dynamic Power Switching (DPS). Implement board-independent core support for DPS that is then used by board-specific code to load custom DPS scripts. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: AB3100 OTP readoutLinus Walleij
This adds the ability to read out OTP (One-Time Programmable) registers in the AB3100 MFD ASIC. It's a simple sysfs file you can cat to prompt. The OTP registers of the AB3100 are used to store various device-unique information such as customer ID, product flags and the 3GPP standard IMEI (International Mobile Equipment Indentity) number. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17regulator: Add Freescale MC13783 driverSascha Hauer
This driver provides basic support for the voltage regulators integrated into the Freescale MC13783 PMIC. It is currently only possible to enable/disable outputs, not to actually set the voltage. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: Add Freescale MC13783 driverSascha Hauer
This driver provides the core Freescale MC13783 support. It registers the client platform_devices and provides access to the A/D converter. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: AB3100 disable irq nosyncLinus Walleij
This will make the worker fire interrupt disable the AB3100 IRQ without sync which resolves a race since the interrupt obviously cannot wait for itself to complete while being handled. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 08:58:46 +0000