aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-06-12myri10ge: report when the link partner is running in Myrinet modeBrice Goglin
Since Myri-10G boards may also run in Myrinet mode instead of Ethernet, add a message when we detect that the link partner is not running in the right mode. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12myri10ge: limit the number of recoveriesBrice Goglin
Limit the number of recoveries from a NIC hw watchdog reset to 1 by default. It enables detection of defective NICs immediately since these memory parity errors are expected to happen very rarely (less than once per century*NIC). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12NetXen: Fix link status messagesMithlesh Thukral
NetXen: Fix incorrect link status even with switch turned OFF. NetXen driver failed to accurately indicate when a link is up or down. This was encountered during failover testing, when the first port indicated that the link was up even when the 10G switch it was assigned to in the Bladecenter was turned off completely. Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12Revert "[netdrvr e100] experiment with doing RX in a similar manner to eepro100"Jeff Garzik
This reverts commit d52df4a35af569071fda3f4eb08e47cc7023f094. This patch attempted to fix e100 for non-cache coherent memory architectures by using the cb style code that eepro100 had and using the EL and s bits from the RFD list. Unfortunately the hardware doesn't work exactly like this and therefore this patch actually breaks e100. Reverting the change brings it back to the previously known good state for 2.6.22. The pending rewrite in progress to this code can then be safely merged later. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12[TCP]: Disable TSO if MD5SIG is enabled.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-12[PPP_MPPE]: Fix "osize too small" check.Konstantin Sharlaimov
Prevent mppe_decompress() from generating "osize too small" errors when checking for output buffer size. When receiving a packet of mru size the output buffer for decrypted data is 1 byte too small since mppe_decompress() tries to account for possible PFC, however later in code it is assumed no PFC. Adjusting the check prevented these errors from occurring. Signed-off-by: Konstantin Sharlaimov <konstantin.sharlaimov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-12Merge branch 'mac80211-fixes' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2007-06-12[PATCH] libertas: convert libertas_mpp into anycast_maskLuis Carlos
With firmware 5.220.11.p5, this allows to specify the anycast addresses the device will listen to. The anycast address range is C0:27:C0:27:C0:XX where XX goes from 00 to 1F (or 0 to 31 in dec). The value to write on anycast_mask will specify which addresses the device listens to. Bits in a 32 bit int are numbered from 0 (least significative bit) to 31. A specific address ending in YY will be listened to if bit YY in the value is set to one. Examples: 0x00000000 : do not listen to any anycast address 0xFFFFFFFF : listen to every anycast address from :00 to :1F 0x00000013 : listen to anycast addresses :00, :01 and :04 Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12[PATCH] libertas: actually send mesh frames to mesh netdevDan Williams
Found by Luis; got broken during module split. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12[PATCH] libertas: deauthenticate from AP in channel switchLuis Carlos Cobo Rus
This avoids channel mismatch between driver and firmware in case we change channel while associated to an AP. Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12[PATCH] libertas: pull current channel from firmware on mesh autostartLuis Carlos Cobo Rus
Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12IB/mlx4: Fix warning in rounding up queue sizesRoland Dreier
Doing max(1, foo) where foo is u32 generates a warning, because 1 is a signed constant. Fix this by using 1U instead. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-12IB/mlx4: Fix handling of wq->tail for send completionsRoland Dreier
Cast the increment added to wq->tail when send completions are processed to u16 to avoid using wrong values caused by standard integer promotions. The same bug was fixed in libmlx4 by Eli Cohen <eli@mellanox.co.il>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-12[PARISC] remove global_ack_eiemGrant Grundler
Kudos to Thibaut Varene for spotting the (mis)use of appropriately named global_ack_eiem. This took a long time to figure out and both insight from myself, Kyle McMartin, and James Bottomley were required to narrow down which bit of code could have this race condition. The symptom was interrupts stopped getting delivered while some workload was generating IO interrupts on two different CPUs. One of the interrupt sources would get masked off and stay unmasked. Problem was global_ack_eiem was accessed with read/modified/write sequence and not protected by a spinlock. PA-RISC doesn't need a global ack flag though. External Interrupts are _always_ delivered to a single CPU (except for "global broadcast interrupt" which AFAIK currently is not used.) So we don't have to worry about any given IRQ vector getting delivered to more than one CPU. Tested on a500 and rp34xx boxen. rsync to/from gsyprf11 (a500) would lock up the box since NIC (tg3) interrupt and SCSI (sym2) were on "opposite" CPUs (2 CPU system). Put them on the same CPU or apply this patch and 10GB of data would rsync completely. Please apply the following critical patch. thanks, grant Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Acked-by: Thibaut VARENE <T-Bone@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-06-12Input: i8042 - add ULI EV4873 to noloop listDmitry Torokhov
The box does not implement AUX LOOP command properly and so we can't test for AUX IRQ delivery so blacklist it via DMI and assume that AUX port is present. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-12Input: i8042 - add ASUS P65UP5 to the noloop listDmitry Torokhov
This board does not raise AUX IRQ in response to AUX LOOP command which interferes with our test for proper AUX IRQ wiring. Put it in the blacklist and assume mouse is present. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-12Input: usbtouchscreen - fix fallout caused by move from drivers/usbOndrej Zary
During the move from drivers/usb/input into drivers/input/touchscreen Kconfig variables were shuffled a bit to use a new namespace (CONFIG_TOUCHSCREEN) while usbtouchscreen was still using old ones. Also noticed by Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-11[XFS] Update the MAINTAINERS file entry for XFS.Timothy Shimmin
Remove David Chatterton from XFS entry in MAINTAINERS file. Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-06-11[PATCH] mac80211: Don't stop tx queue on master device while scanning.Mattias Nissler
mac80211 stops the tx queues during scans. This is wrong with respect to the master deivce tx queue, since stopping it prevents any probes from being sent during the scan. Instead, they accumulate in the queue and are only sent after the scan is finished, which is obviously wrong. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Make sure RQ allocation is always valid RDMA/cma: Fix initialization of next_port IB/mlx4: Fix zeroing of rnr_retry value in ib_modify_qp() mlx4_core: Don't set MTT address in dMPT entries with PA set mlx4_core: Check firmware command interface revision IB/mthca, mlx4_core: Fix typo in comment mlx4_core: Free catastrophic error MSI-X interrupt with correct dev_id mlx4_core: Initialize ctx_list and ctx_lock earlier mlx4_core: Fix CQ context layout
2007-06-11[PATCH] mac80211: fix debugfs tx power reduction outputJohannes Berg
This patch fixes a typo in mac80211's debugfs.c. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] cfg80211: fix signed macaddress in sysfsDavid Lamparter
Fix signedness mixup making mac addresses show up strangely (like 00:11:22:33:44:ffffffaa) in /sys/class/ieee80211/*/macaddress. Signed-off-by: David Lamparter <equinox@diac24.net> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11kbuild: fix sh64 section mismatch problemsSam Ravnborg
There's a special .cranges section that is almost always generated, with data being moved to the appropriate section by the linker at a later stage. To give a bit of background, sh64 has both a native SHmedia instruction set (32-bit instructions) and SHcompact (which is compatability with normal SH -- 16-bit, a massively reduced register set, etc.). code ranges are emitted when we're using the 32-bit ABI, but not the 64-bit one. It is a special staging section used solely by binutils where code with different flags get placed (more specifically differing flags for input and output sections), before being lazily merged by the linker. The closest I've been able to find to documentation is: http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/ld/emultempl/sh64elf.em?rev=1.10&content-type=text/x-cvsweb-markup&cvsroot=src It's an array of 8-byte Elf32_CRange structure given in http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/bfd/elf32-sh64.h?rev=1.4&content-type=text/x-cvsweb-markup&cvsroot=src that describes for which ISA a range is used. Silence the warnings by allowing references from .init.text to .cranges. The following warnings are fixed: WARNING: init/built-in.o(.cranges+0x0): Section mismatch: reference to .init.text: WARNING: init/built-in.o(.cranges+0xa): Section mismatch: reference to .init.text: WARNING: init/built-in.o(.cranges+0x14): Section mismatch: reference to .init.text: WARNING: init/built-in.o(.cranges+0x1e): Section mismatch: reference to .init.text: WARNING: init/built-in.o(.cranges+0x28): Section mismatch: reference to .init.text: WARNING: init/built-in.o(.cranges+0x32): Section mismatch: reference to .init.text: WARNING: kernel/built-in.o(.cranges+0x50): Section mismatch: reference to .init.text: WARNING: kernel/built-in.o(.cranges+0x5a): Section mismatch: reference to .init.text: WARNING: kernel/built-in.o(.cranges+0x64): Section mismatch: reference to .init.text: WARNING: kernel/built-in.o(.cranges+0xfa): Section mismatch: reference to .init.text: WARNING: kernel/built-in.o(.cranges+0x104): Section mismatch: reference to .init.text: WARNING: kernel/built-in.o(.cranges+0x10e): Section mismatch: reference to .init.text: WARNING: kernel/built-in.o(.cranges+0x14a): Section mismatch: reference to .init.text: WARNING: kernel/built-in.o(.cranges+0x154): Section mismatch: reference to .init.text: WARNING: kernel/built-in.o(.cranges+0x15e): Section mismatch: reference to .init.text: WARNING: mm/built-in.o(.cranges+0x6e): Section mismatch: reference to .init.text: WARNING: mm/built-in.o(.cranges+0x78): Section mismatch: reference to .init.text: WARNING: mm/built-in.o(.cranges+0x82): Section mismatch: reference to .init.text: WARNING: mm/built-in.o(.cranges+0xaa): Section mismatch: reference to .init.text: WARNING: fs/built-in.o(.cranges+0x136): Section mismatch: reference to .init.text: WARNING: fs/built-in.o(.cranges+0x140): Section mismatch: reference to .init.text: WARNING: fs/built-in.o(.cranges+0x14a): Section mismatch: reference to .init.text: WARNING: fs/built-in.o(.cranges+0x168): Section mismatch: reference to .init.text: WARNING: fs/built-in.o(.cranges+0x1f4): Section mismatch: reference to .init.text: WARNING: fs/built-in.o(.cranges+0x1fe): Section mismatch: reference to .init.text: WARNING: net/built-in.o(.cranges+0x302): Section mismatch: reference to .init.text: WARNING: net/built-in.o(.cranges+0x30c): Section mismatch: reference to .init.text: WARNING: net/built-in.o(.cranges+0x316): Section mismatch: reference to .init.text: WARNING: net/built-in.o(.cranges+0x3a2): Section mismatch: reference to .init.text: WARNING: net/built-in.o(.cranges+0x3ac): Section mismatch: reference to .init.text: WARNING: net/built-in.o(.cranges+0x4ce): Section mismatch: reference to .init.text: WARNING: net/built-in.o(.cranges+0x4d8): Section mismatch: reference to .init.text: Signed-off-by: Paul Mundt <lethal@linux-sh.org> Cc: Kaz Kojima <kkojima@rr.iij4u.or.jp> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-06-11Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix smp barriers in test_and_{change,clear,set}_bit [MIPS] Fix IP27 build [MIPS] Fix modpost warnings by making start_secondary __cpuinit [MIPS] SMTC: Fix build error caused by nonsense code. [MIPS] SMTC: The MT ASE requires to initialize c0_pagemask and c0_wired. [MIPS] SMTC: Don't continue in set_vi_srs_handler on detected bad arguments. [MIPS] SMTC: Fix warning. [MIPS] Wire up utimensat, signalfd, timerfd, eventfd [MIPS] Atlas: Fix build. [MIPS] Always install the DSP exception handler. [MIPS] SMTC: Don't set and restore irqregs ptr from self_ipi. [MIPS] Fix KMODE for the R3000
2007-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] CIFS should honour umask [CIFS] Missing flag on negprot needed for some servers to force packet signing [CIFS] whitespace cleanup part 2 [CIFS] whitespace cleanup [CIFS] fix mempool destroy done in wrong order in cifs error path [CIFS] typo in previous patch [CIFS] Fix oops on failed cifs mount (in kthread_stop)
2007-06-11Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgartLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] intel_agp: Add support for G33, Q33 and Q35 chipsets [AGPGART] intel_agp: add support for 945GME [AGPGART] intel_agp: add support for 965GME/GLE [AGPGART] intel_agp: use table for device probe [AGPGART] intel_agp: cleanup intel private data
2007-06-11Merge branch 'linus-plus-plus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'linus-plus-plus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: limit post SRST nsect/lbal wait to ~100ms libata: force PIO on IOMEGA ZIP 250 ATAPI libata passthru: update cached device paramters libata passthru: always enforce correct DEV bit libata passthru: map UDMA protocols libata passthru: support PIO multi commands libata passthru: update protocol numbers libata: Correct abuse of language libata-core/sff: Fix multiple assumptions about DMA ahci: Add MCP73/MCP77 support to AHCI driver libata: fix hw_sata_spd_limit initialization libata: print device model and firmware revision for ATAPI devices libata: fix probe time irq printouts libata: disable NCQ for HITACHI HTS541680J9SA00/SB21C7EP remove unused variable in pata_isapnp
2007-06-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (5751): Ivtv: fix ia64 printk format warnings. V4L/DVB (5761): Fix broken b2c2 dependency on non x86 architectures V4L/DVB (5673): Fix audio stuttering for saa711x/ivtv when in radio mode. V4L/DVB (5736): Add V4L2_FBUF_CAP/FLAG_LOCAL/GLOBAL_INV_ALPHA V4L/DVB (5732): Add ivtv CROPCAP support and fix ivtv S_CROP for video output. V4L/DVB (5730): Remove unused V4L2_CAP_VIDEO_OUTPUT_POS V4L/DVB (5720): Usbvision: fix urb allocation and submits V4L/DVB (5716): Tda10086,tda826x: fix tuning, STR/SNR values V4L/DVB (5675): Move big PIO accesses from the interrupt handler to a workhandler V4L/DVB (5699): Cinergyt2: fix file release handler V4L/DVB (5700): Saa7111: fix picture settings cache bug V4L/DVB (5702): Fix Kconfig items to avoid linkedition errors
2007-06-11Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: ide: Add the MCP73/77 support to PATA driver Add the PATA controller device ID to pci_ids.h for MCP73/MCP77. hpt366: disallow Ultra133 for HPT374 ide: generic IDE PCI driver, add another device exception ide: HPA detect from resume it821x: RAID mode fixes serverworks: fix CSB6 tuning logic serverworks: remove crappy code
2007-06-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: don't call switch on old cards mmc: fix broken if clause au1xmmc: Replace C code with call to ARRAY_SIZE() macro. mmc-atmel: remove linux/mmc/protocol.h dependencies
2007-06-11Merge branch 'splice-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'splice-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block: splice: __generic_file_splice_read: fix read/truncate race splice: __generic_file_splice_read: fix i_size_read() length checks splice: move balance_dirty_pages_ratelimited() outside of splice actor pipe: move pipe_inode_info structure decleration up before it's used splice: remove do_splice_direct() symbol export splice: move inode size check into generic_file_splice_read()
2007-06-11[PATCH] libertas: reduce SSID and BSSID mixed-case abuseDan Williams
Kill mixed case function names from scan.c/scan.h. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove WPA_SUPPLICANT structureDan Williams
Unused. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove structure WLAN_802_11_SSID and libertas_escape_essidDan Williams
Replace WLAN_802_11_SSID with direct 'ssid' and 'ssid_len' members like ieee80211. In the process, remove private libertas_escape_essid and depend on the ieee80211 implementation of escape_essid instead. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: tweak association debug outputDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fix big-endian associate command.David Woodhouse
Byte-swapping length fields and then passing them to memcpy() considered harmful. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: don't byte-swap firmware version number. It's a byte array.David Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: more endianness fixes, in tx.c this timeDavid Woodhouse
Now we finally get connectivity. For a while, before something else dies... Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: More endianness fixes.David Woodhouse
Now it at least manages to load the firmware. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: first pass at fixing up endianness issuesDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: sparse fixesDan Williams
Fix various issues reported by sparse. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fix character set in READMEDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: support for mesh autostart on firmware 5.220.11Luis Carlos Cobo Rus
Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: split wext for eth and mshLuis Carlos Cobo Rus
Separate wireless handlers of mshX and ethX. ethX remains as before. For mshX, it has been disabled set/get essid, wap and set mode. Get mode always returns "Repeater" and by now we use the Nickname to show if the mesh is active ("Mesh") or not (empty). The rest remains as before. Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: make mac address configuration work with mesh interface tooLuis Carlos Cobo Rus
Signed-off-by: Luis Carlos Cobo Rus <luiscarlos@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: updated readme fileLuis Carlos Cobo Rus
Fix some wording and blinding table command options, clarify argument list for fwt_add and fwt_list, simplify fwt_list_route Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: Make WPA work through supplicant handshakeDan Williams
Fix WPA so it works up through the supplicant 4-Way handshake process. Doesn't successfully pass traffic yet; may be problems installing the GTK to the firmware. - RSN needs to be enabled before the association command is sent - Use keys from the association request not the adapter structure - cmd_act_mac_strict_protection_enable != IW_AUTH_DROP_UNENCRYPTED - Fix network filtering logic in is_network_compatible() WPA helpers Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: add more verbose debugging to libertas_cmd_80211_authenticateDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: debug print spacing fixes in assoc.cDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: send SIOCGIWSCAN event after partial scans tooDan Williams
Any time the driver gets new scan results, even from partial scans, it should send the scan event to userspace. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 03:47:51 +0000