aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-06-26[SCSI] qla2xxx: Update version number to 8.01.05-k3.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Correctly set the firmware NOS/OLS timeout during ↵Andrew Vasquez
initialization. Original code incorrectly assigned it to the driver's link-down-timeout value (a value in seconds). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Convert from pci_module_init() to pci_register_driver().Andrew Vasquez
Also remove qla2xxx_probe_one/qla2xxx_remove_one stubs previously used with external firmware module loaders. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Correct 'loop-down' determination logic in qla2x00_fw_ready().Andrew Vasquez
As there is no point in failing the initialization process when firmware informs the host software that it could not transition beyond a CONFIG_WAIT nor WAIT_FOR_LOGIN state. Previous logic would mark such conditions as a general *failure* and subsequently tear-down the scsi-host during initialization. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Add support for extended error logging.Andrew Vasquez
Similar in form to QLogic's standard offering -- via the 'extended_error_logging' module parameter. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Cleanup DEBUG macro usage.Andrew Vasquez
- macro usage statements should terminate with a ';' - remove unused macros. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Remove no-op IOCTL codes and macros.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Create an VPD sysfs entry for supported ISPs only.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Add DMI (Diagnostics Monitoring Interface) support.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Honour 'skip process-login' option during fabric-login IOCB.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Add NVRAM 'Disable Serdes' bit support.Andrew Vasquez
The host section of ISP24xx NVRAMs contain a new bit which allows a user to selectively disable ports of an HBA. These ports (hosts) will not be presented to the midlayer. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Resync with latest HBA SSID specification -- 2.2j.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Rework firmware-trace facilities.Andrew Vasquez
- Defer firmware dump-data raw-to-textual conversion to user-space. - Add module parameter (ql2xallocfwdump) to allow for per-HBA allocations of firmware dump memory. - Dump request and response queue data as per firmware group request. - Add extended firmware trace support for ISP24XX/ISP54XX chips. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] SCSI core: Allow QUIESCE -> CANCEL sdev transitionAlan Stern
We have to be able to remove SCSI devices even when they are suspended, so QUIESCE -> CANCEL must be a legal state transition. This patch (as727) adds the transition to the state machine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] sd/scsi_lib simplify sd_rw_intr and scsi_io_completionLuben Tuikov
This patch simplifies "good_bytes" computation in sd_rw_intr(). sd: "good_bytes" computation is always done in terms of the resolution of the device's medium, since after that it is the number of good bytes we pass around and other layers/contexts (as opposed ot sd) can translate that to their own resolution (block layer:512). It also makes scsi_io_completion() processing more straightforward, eliminating the 3rd argument to the function. It also fixes a couple of bugs like not checking return value, using "break" instead of "return;", etc. I've been running with this patch for some time now on a test (do-it-all) system. Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] aic79xx: remove slave_destroyHannes Reinecke
Even with the latest fixes aic79xx still occasionally triggers the BUG_ON in slave_destroy. Rather than trying to figure out the various levels of interaction here I've decided to remove the callback altogether. The primary reason for the slave_alloc / slave_destroy is to keep an index of pointers to the sdevs associated with a given target. However, by changing the arguments to the affected functions slightly it's possible to avoid the use of that index entirely. The only performance penalty we'll incur is in writing the information for /proc/scsi/XXX, as we'll have to recurse over all available sdevs to find the correct ones. But I doubt that reading from /proc is in any way time-critical. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] HP XP devinfo updateHannes Reinecke
According to Anthony Cheung all HP XP arrays with "OPEN-" types support REPORT_LUN. So there is no reason why we shouldn't use it. Signed-off-by: Anthony Cheung <anthony.cheung@hp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] megaraid_sas: zcr with fixSumant Patro
The patch adds support for a ZCR controller (Device ID : 0x413). It also has a critical bug fix : Disable controller interrupt before firing INIT cmd to FW. Interrupt is enabled after required initialization is over. This is done to ensure that driver is ready to handle interrupts when it is generated by the controller. Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] ibmvscsi: treat busy and error conditions separatelyDave C Boutcher
This patch fixes a condition where ibmvscsi treats a transport error as a "busy" condition, so no errors were returned to the scsi mid-layer. In a RAID environment this means that I/O hung rather than failing over. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] scsi_debug version 1.79Douglas Gilbert
- add 'virtual_gb' parameter to simulate large storage (by wrapping in dev_size_mb megabytes of actual ram) - add 'no_lun_0' parameter to skip lun 0 on each target (but still respond as required to INQUIRY + REPORT LUNS) - add well know lu support - add MODE SELECT commands support [pages: 0xa and 0x1c] - add LOG SENSE command support [pages: 0xd and 0x2f] - add READ CAPACITY (16) support - increase number of mode pages supported (to read), mainly transport specific (SAS) mode (sub)pages - add more VPD pages and extend others, including ATA information VPD page - START STOP UNIT now maintains a state machine - READ (16) and WRITE (16) cope with lbas larger than 32 bits (needed for the 'virtual_gb' parameter) - allow single command transfers up to 32 MB - more precise error (sense data) messages Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] kmalloc argument switcheroo in recent 53c700 change.Dave Jones
On Wed, Jun 21, 2006 at 07:00:34PM +0000, Linux Kernel wrote: > commit 67d59dfdeb21df2c16dcd478b66177e91178ecd0 > tree ae85703651d81740f4a6cd398f9dd4d6aabe6a2f > parent 6db874fbdbedba5e15e76cc03b42f52ea70338c0 > author James Bottomley <James.Bottomley@steeleye.com> Wed, 14 Jun 2006 07:31:19 -0500 > committer James Bottomley <jejb@mulgrave.il.steeleye.com> Tue, 20 Jun 2006 05:34:01 -0500 > > [SCSI] 53c700: remove reliance on deprecated cmnd fields > ... > > + SDp->hostdata = kmalloc(GFP_KERNEL, sizeof(struct NCR_700_sense)); > + > + if (!SDp->hostdata) > + return -ENOMEM; "I'll take reversed arguments for $100 please Alex". Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-25[PATCH] uclinux: use PER_LINUX_32BIT in binfmt_flatMalcolm Parsons
binfmt_flat.c calls set_personality with PER_LINUX as the personality. On the arm architecture this results in the program running in 26bit usermode. PER_LINUX_32BIT should be used instead. This doesn't affect other architectures that use binfmt_flat. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: make enable_irq() macro statementGreg Ungerer
Change enable_irq() macro to be a statement, not expression. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: fix ColdFire 5249 PLL setGreg Ungerer
Fix PLL setting for the Coldfire 5249 CPU. This brings it into line with the new style frequency configuration of m68knommu parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: ColdFire cache flush fixupsGreg Ungerer
Fix flush code for the ColdFire 5206/5206e/5272 cases. Add support for the new ColdFire 532x CPU family Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: improve syscall entry and fix stracePhilippe De Muyter
Here is a patch to the system call handling for 5307/5272/etc to: - fix the strace support (one tested the wrong bit) - make all system calls a little bit faster by inlining set_esp0 and supporting ENOSYS out of the critical path. - remove extraneous spaces Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: force stack alignment on ColdFireGreg Ungerer
This patch solve a bug triggered by execvp (this function use calloc to store the argument list and gcc 3.4.x align the stack to word, not to dword). This situation aren't related to signal handling and all 2.6.x have the bug. On ColdFire targets we must force the stack to be aligned. Original patch from Andrea Tarani <andrea.tarani@gilbarco.com>, Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: configurable frequency selection headerGreg Ungerer
Remove list of fixed clock frequency options used for configuring master clock, and make field an int. Much more flexible this way, no need to add more options for every new used freqency. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: configurable frequency selectionGreg Ungerer
Remove list of fixed clock frequency options used for configuring master clock, and make field an int. Much more flexible this way, no need to add more options for every new used freqency. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: configure support for Avnet5282 boardGreg Ungerer
Add support for the AVNET 5282 board. Patch submitted by Daniel Alomar <dalomar@serrasold.com>. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: ColdFire 532x CPU configure supportGreg Ungerer
Add configure support for the new Freescale 532x family of CPUs. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25Revert "swsusp special saveable pages support" commitsLinus Torvalds
This reverts commits 3e3318dee0878d42ed62a19c292a2ac284135db3 [PATCH] swsusp: x86_64 mark special saveable/unsaveable pages b6370d96e09944c6e3ae8d5743ca8a8ab1f79f6c [PATCH] swsusp: i386 mark special saveable/unsaveable pages ce4ab0012b32c1a4a1d6e934aeb73bf3151c48d9 [PATCH] swsusp: add architecture special saveable pages support because not only do they apparently cause page faults on x86, the infrastructure doesn't compile on powerpc. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: ColdFire 532x CPU platform build supportGreg Ungerer
Add build support for the new Freescale 532x CPU platforms. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: add ColdFire 532x UART address supportGreg Ungerer
Add support for the UART addressing on the new Freescale M532x CPU family. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: add ColdFire 532x timer build supportGreg Ungerer
Add build support for new Freescale M532x CPU family timer. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: cleanup setup.cGreg Ungerer
A cleanup of m68knommu/kernel/setup.c : - No need to initialize global pointers to NULL, they will have that value automatically, and they eat up space in my data segment image in FLASH. - Remove get_cpuinfo. It has been replaced by show_cpuinfo. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: check DEBUG defined arch codeGreg Ungerer
Don't rely on DEBUG having a value, check for it being defined. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: include ColdFire 532x register definitionsGreg Ungerer
Include the ColdFire 532x support when including ColdFire peripharp support definitions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: add ColdFire 532x cache initGreg Ungerer
Add cache init support for the new ColdFire 532x CPU family. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: 532x UART supportGreg Ungerer
ColdFire serial driver support for the new 532x CPU family UARTs. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: ColdFire 532x register definitionsGreg Ungerer
Register definitions for the new Freescale 532x Coldfire CPU family. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: ColdFire 532x CPU startup codeGreg Ungerer
Add kernel startup code for the new Freescale 532x CPU family. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: read/write register access for PIT timerGreg Ungerer
Modify the m68knommu/ColdFire PIT timer code to use register offsets with raw_read/raw_write access, instead of a mapped struct. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: remove use of rom_lengthGreg Ungerer
Remove use of rom_length. It serves not real purpose, and when we move to new stye RAM configuration it will not be needed. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: switch arch config name to CONFIG_M68KGreg Ungerer
Switch to naming the architecture config options for the m68knommu branch as "M68K", dropping "M68KNOMMU". The CONFIG_MMU separates the 2 now, and the m68knommu branch is still strictly speaking an M68K (including the ColdFire parts). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: read/write register access for ColdFire core timerGreg Ungerer
Modify the m68knommu/ColdFire core timer code to use register offsets with raw_read/raw_write access, instead of a mapped struct. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68knommu: 532x FEC eth struct mapGreg Ungerer
Specify the struct mapping used on the new Freescale 532x CPU family's FEC ethernet core. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] spufs: update ->flush method protoAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] xfs: update ->flush method protoAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Nathan Scott <nathans@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: iSER Kconfig and Makefile IB/iser: iSER handling of memory for RDMA IB/iser: iSER RDMA CM (CMA) and IB verbs interaction IB/iser: iSER initiator iSCSI PDU and TX/RX IB/iser: iSCSI iSER transport provider high level code IB/iser: iSCSI iSER transport provider header file IB/uverbs: Remove unnecessary list_del()s IB/uverbs: Don't free wr list when it's known to be empty
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 07:17:05 +0000