aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-10-25toshiba_acpi: always call input_sync() after input_report_switch()Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-25ACPI: Always report a sync event after a lid state changeGuillem Jover
Currently not always an EV_SYN event is reported to userland after the EV_SW SW_LID event has been sent. This is easy to verify by using “input-events” from input-utils and just closing and opening the lid. Signed-off-by: Guillem Jover <guillem.jover@nokia.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-25ACPI: cpufreq, processor: fix compile error in drivers/acpi/processor_perflib.cMiao Xie
When trying to build 2.6.28-rc1 on ia64, make aborts with: CC drivers/acpi/processor_perflib.o drivers/acpi/processor_perflib.c:41:28: error: asm/cpufeature.h: No such file or directory drivers/acpi/processor_perflib.c: In function ‘acpi_processor_get_performance_info’: drivers/acpi/processor_perflib.c:364: error: implicit declaration of function ‘boot_cpu_has’ drivers/acpi/processor_perflib.c:364: error: ‘X86_FEATURE_EST’ undeclared (first use in this function) drivers/acpi/processor_perflib.c:364: error: (Each undeclared identifier is reported only once drivers/acpi/processor_perflib.c:364: error: for each function it appears in.) make[2]: *** [drivers/acpi/processor_perflib.o] Error 1 make[1]: *** [drivers/acpi] Error 2 make: *** [drivers] Error 2 this patch fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-24i7300_idle: Fix compile warning CONFIG_I7300_IDLE_IOAT_CHANNEL not definedVenki Pallipadi
When I7300_idle driver is not configured, there is a compile time warning about IDLE_IOAT_CHANNEL not defined. Fix it. Reported-by: Suresh Siddha <suresh.b.siddha@intel.com> Reported-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-24i7300_idle: Cleanup based review commentsVenki Pallipadi
Cleanup of i7300 idle driver based on review comments from Randy Dunlap, Andi Kleen and Len Brown. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-24i7300_idle: Disable ioat channel only on platforms where ile driver can loadVenki Pallipadi
Based on input from Andi Kleen: share the platform detection code with ioat_dma and disable the channel in dma engine only for specific platforms. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-24mfd: Make WM8400 depend on I2C until SPI is submittedMark Brown
Otherwise we could build in WM8400 but not I2C. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-24mfd: add missing Kconfig entry for da903xSamuel Ortiz
This one was accidentally left out during the rc1 mfd merge. Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-24uwb: build UWB before USB/WUSBDavid Vrabel
The WHCI-HCD driver in drivers/usb/host/ depends on the umc driver in drivers/uwb/. Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-24libata: fix bug with non-ncq devicesJens Axboe
The recent commit 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e ("libata: switch to using block layer tagging support") to enable support for block layer tagging in libata was broken for non-NCQ devices The block layer initializes the tag field to -1 to detect invalid uses of a tag, and if the libata devices does NOT support NCQ, we just used that field to index the internal command list. So we need to check for -1 first and only use the tag field if it's valid. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Paul Mundt <lethal@linux-sh.org> Tested-by: Dave Young <hidave.darkstar@gmail.com> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23Linux 2.6.28-rc1Linus Torvalds
2008-10-23Fix PCI hotplug printk formatRandy Dunlap
Fix printk format warning: drivers/pci/hotplug/acpiphp_ibm.c:207: warning: format '%08lx' expects type 'long unsigned int', but argument 3 has type 'long long unsigned int' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: remove unused resource assignment in pci_read_bridge_bases() PCI hotplug: shpchp: message refinement PCI hotplug: shpchp: replace printk with dev_printk PCI: add routines for debugging and handling lost interrupts PCI hotplug: pciehp: message refinement PCI: fix ARI code to be compatible with mixed ARI/non-ARI systems PCI hotplug: cpqphp: fix kernel NULL pointer dereference
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) tcp: Restore ordering of TCP options for the sake of inter-operability net: Fix disjunct computation of netdev features sctp: Fix to handle SHUTDOWN in SHUTDOWN_RECEIVED state sctp: Fix to handle SHUTDOWN in SHUTDOWN-PENDING state sctp: Add check for the TSN field of the SHUTDOWN chunk sctp: Drop ICMP packet too big message with MTU larger than current PMTU p54: enable 2.4/5GHz spectrum by eeprom bits. orinoco: reduce stack usage in firmware download path ath5k: fix suspend-related oops on rmmod [netdrvr] fec_mpc52xx: Implement polling, to make netconsole work. qlge: Fix MSI/legacy single interrupt bug. smc911x: Make the driver safer on SMP smc911x: Add IRQ polarity configuration smc911x: Allow Kconfig dependency on ARM sis190: add identifier for Atheros AR8021 PHY 8139x: reduce message severity on driver overlap igb: add IGB_DCA instead of selecting INTEL_IOATDMA igb: fix tx data corruption with transition to L0s on 82575 ehea: Fix memory hotplug support netdev: DM9000: remove BLACKFIN hacking in DM9000 netdev driver ...
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: math-emu: Fix thinko in _FP_DIV math-emu: Fix signalling of underflow and inexact while packing result. sparc: Add checkstack support sparc: correct section of current_pc() sparc: correct section of apc_no_idle sparc64: Fix race in arch/sparc64/kernel/trampoline.S
2008-10-23PCI: remove unused resource assignment in pci_read_bridge_bases()Zhao, Yu
This cleanup removes the resource assignment in pci_read_bridge_bases() since it has taken care by pci_alloc_child_bus() when allocating the bus: /* Set up default resource pointers and names.. */ for (i = 0; i < PCI_BRIDGE_RES_NUM; i++) { child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i]; child->resource[i]->name = child->name; } Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: shpchp: message refinementTaku Izumi
This patch refines messages in shpchp module. The main changes are as follows: - remove the trailing "." - remove __func__ as much as possible - capitalize the first letter of messages - show PCI device address including its domain Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: shpchp: replace printk with dev_printkTaku Izumi
This patch replaces printks within shpchp module with dev_printks. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: drivers/ide/generic.c -> drivers/ide/ide-pci-generic.c ide-disk: set non-rotational queue flag for SSD and CF devices ide-cd: add TEAC CD-224E to the NO_AUTOCLOSE list ide: Add tx4938ide driver (v2) TXx9: Add TX4938 ATA support (v3) ide: Add tx4939ide driver (v6) ide: two more pci_ioremap_bar() conversions pci: use pci_ioremap_bar() in drivers/ide sgiioc4: use ide_host_add() (take 2) sgiioc4: fix error cleanup path (take 2)
2008-10-23Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds/acpi: Fix merge fallout from acpi_driver_data change leds: Simplify logic in leds-ams-delta leds: Fix trigger registration race leds: Fix leds-class.c comment leds: Add driver for HP harddisk protection LEDs leds: leds-pca955x - Mark pca955x_led_set() static leds: Remove uneeded leds-cm-x270 driver leds: Remove uneeded strlen calls leds: Add leds-wrap default-trigger leds: Make default trigger fields const leds: Add backlight LED trigger leds: da903x: Add support for LEDs found on DA9030/DA9034
2008-10-23Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: corgi backlight driver should not select ssp drivers [ARM] 5321/1: Kirkwood: fix typo in Makefile [ARM] 5320/1: fix assembly constraints in implementation of do_div() [ARM] 5318/1: Swap the PRRR and NMRR values in proc-v7.S [ARM] 5316/1: AT91: oops (regression) fix on gpio irq [ARM] msm: vreg interface to msm7k pmic [ARM] msm: dma: various basic dma improvements and bugfixes [ARM] msm: clock: provide clk_*() api support for [ARM] msm: clean up iomap and devices [ARM] msm: add proc_comm support, necessary for clock and power control [ARM] msm: rename ARCH_MSM7X00A to ARCH_MSM [ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h [ARM] pxa: update {corgi,spitz}_defconfig to favor SPI-based drivers [ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"
2008-10-23Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: Add driver for Tabletkiosk Sahara TouchIT-213 Tablet PC backlight: da903x: Add backlight driver for DA9030/DA9034 tosa: add support for bl/lcd driver backlight: add support for Sharp SL-6000 LCD and backlight drivers
2008-10-23libata: switch to using block layer tagging supportJens Axboe
libata currently has a pretty dumb ATA_MAX_QUEUE loop for finding a free tag to use. Instead of fixing that up, convert libata to using block layer tagging - gets rid of code in libata, and is also much faster. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23PCI: add routines for debugging and handling lost interruptsJames Bottomley
We're getting a lot of storage drivers blamed for interrupt misrouting issues. This patch provides a standard way of reporting the problem ... and, if possible, correcting it. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: pciehp: message refinementTaku Izumi
This patch refines messages in pciehp module. The main changes are as follows: - remove the trailing "." - remove __func__ as much as possible - capitalize the first letter of messages - show PCI device address including its domain Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI: fix ARI code to be compatible with mixed ARI/non-ARI systemsZhao, Yu
The original ARI support code has a compatibility problem with non-ARI devices. If a device doesn't support ARI, turning on ARI forwarding on its upper level bridge will cause undefined behavior. This fix turns on ARI forwarding only when the subordinate devices support it. Tested-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: cpqphp: fix kernel NULL pointer dereferenceKenji Kaneshige
The following patch fixes the regression in 2.6.27 that causes kernel NULL pointer dereference at cpqphp driver probe time. This patch should be backported to the .27 stable series. Seems to have been introduced by f46753c5e354b857b20ab8e0fe7b2579831dc369. The root cause of this problem seems that cpqphp driver calls pci_hp_register() wrongly. In current implementation, cpqphp driver passes 'ctrl->pci_dev->subordinate' as a second parameter for pci_hp_register(). But because hotplug slots and it's hotplug controller (exists as a pci funcion) are on the same bus, it should be 'ctrl->pci_dev->bus' instead. Cc: <stable@kernel.org> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23leds/acpi: Fix merge fallout from acpi_driver_data changeStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-23ide: drivers/ide/generic.c -> drivers/ide/ide-pci-generic.cBartlomiej Zolnierkiewicz
Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23ide-disk: set non-rotational queue flag for SSD and CF devicesBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23ide-cd: add TEAC CD-224E to the NO_AUTOCLOSE listMárton Németh
The "TEAC CD-ROM CD-224E" cannot close its tray, so add it to the NO_AUTOCLOSE list. This will correct the "Can close tray" field of /proc/sys/dev/cdrom/info. Signed-off-by: Márton Németh <nm127@freemail.hu> Acked-by: Borislav Petkov <petkovbb@gmail.com> [bart: minor fixups to patch description] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23ide: Add tx4938ide driver (v2)Atsushi Nemoto
This is the driver for the Toshiba TX4938 SoC EBUS controller ATA mode. It has custom set_pio_mode and some hacks for big endian. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: ralf@linux-mips.org Cc: sshtylyov@ru.mvista.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23TXx9: Add TX4938 ATA support (v3)Atsushi Nemoto
Add a helper routine to register tx4938ide driver and use it on RBTX4938 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23ide: Add tx4939ide driver (v6)Atsushi Nemoto
This is the driver for the Toshiba TX4939 SoC ATA controller. This controller has standard ATA taskfile registers and DMA command/status registers, but the register layout is swapped on big endian. There are some other endian issue and some special registers which requires many custom dma_ops/tp_ops routines and build_dmatable. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: ralf@linux-mips.org Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23ide: two more pci_ioremap_bar() conversionsArjan van de Ven
based on suggestion from Sergei Shtylyov, there are two more places where using pci_ioremap_bar() makes sense. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23pci: use pci_ioremap_bar() in drivers/ideArjan van de Ven
Use the newly introduced pci_ioremap_bar() function in drivers/ide. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23sgiioc4: use ide_host_add() (take 2)Sergei Shtylyov
Convert the driver to use ide_host_add() -- this seems to be a straightforward change which I'm not sure why hasn't been done yet... While doing this at last, get rid of: - useless local copy of the 'sgiioc4_port_info' variable; - unnecessary 'goto' and label... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: jeremy@sgi.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23sgiioc4: fix error cleanup path (take 2)Sergei Shtylyov
The driver "forgot" to call iounmap() iff request_mem_region() call failed in sgiioc4_ide_setup_pci_device()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: jeremy@sgi.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23[ARM] pxa: corgi backlight driver should not select ssp driversRussell King
Resolves build errors with eseries and magician defconfigs (which make use of the corgi backlight driver.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-23tcp: Restore ordering of TCP options for the sake of inter-operabilityIlpo Järvinen
This is not our bug! Sadly some devices cannot cope with the change of TCP option ordering which was a result of the recent rewrite of the option code (not that there was some particular reason steming from the rewrite for the reordering) though any ordering of TCP options is perfectly legal. Thus we restore the original ordering to allow interoperability with/through such broken devices and add some warning about this trap. Since the reordering just happened without any particular reason, this change shouldn't cost us anything. There are already couple of known failure reports (within close proximity of the last release), so the problem might be more wide-spread than a single device. And other reports which may be due to the same problem though the symptoms were less obvious. Analysis of one of the case revealed (with very high probability) that sack capability cannot be negotiated as the first option (SYN never got a response). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Reported-by: Aldo Maggi <sentiniate@tiscali.it> Tested-by: Aldo Maggi <sentiniate@tiscali.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-23Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: staging: pcc_acpi: delete obsolete driver
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (21 commits) [SCSI] sd: fix computation of the full size of the device [SCSI] lib: string_get_size(): don't hang on zero; no decimals on exact [SCSI] sun3x_esp: Convert && to || [SCSI] sd: remove command-size switching code [SCSI] 3w-9xxx: remove unnecessary local_irq_save/restore for scsi sg copy API [SCSI] 3w-xxxx: remove unnecessary local_irq_save/restore for scsi sg copy API [SCSI] fix netlink kernel-doc [SCSI] sd: Fix handling of NO_SENSE check condition [SCSI] export busy state via q->lld_busy_fn() [SCSI] refactor sdev/starget/shost busy checking [SCSI] mptfusion: Increase scsi-timeouts, similariy to the LSI 4.x driver. [SCSI] aic7xxx: Take the LED out of diagnostic mode on PM resume [SCSI] aic79xx: user visible misuse wrong SI units (not disk size!) [SCSI] ipr: use memory_read_from_buffer() [SCSI] aic79xx: fix shadowed variables [SCSI] aic79xx: fix shadowed variables, add statics [SCSI] aic7xxx: update *_shipped files [SCSI] aic7xxx: update .reg files [SCSI] aic7xxx: introduce "dont_generate_debug_code" keyword in aicasm parser [SCSI] scsi_dh: Initialize path state to be passive when path is not owned ...
2008-10-23Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix section mismatch warning - apic_x2apic_phys x86: fix section mismatch warning - apic_x2apic_cluster x86: fix section mismatch warning - apic_x2apic_uv_x x86: fix section mismatch warning - apic_physflat x86: fix section mismatch warning - apic_flat x86: memtest fix use of reserve_early() x86 syscall.h: fix argument order x86/tlb_uv: remove strange mc146818rtc include x86: remove redundant KERN_DEBUG on pr_debug x86: do_boot_cpu - check if we have ESR register x86: MAINTAINERS change for AMD microcode patch loader x86/proc: fix /proc/cpuinfo cpu offline bug x86: call dmi-quirks for HP Laptops after early-quirks are executed x86, kexec: fix hang on i386 when panic occurs while console_sem is held MCE: Don't run 32bit machine checks with interrupts on x86: SB600: skip IRQ0 override if it is not routed to INT2 of IOAPIC x86: make variables static
2008-10-23staging: pcc_acpi: delete obsolete driverLen Brown
pcc_acpi is based on an old version of drivers/misc/panasonic-laptop.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-23Fix compile warning in kernel/params.cLinus Torvalds
Move free_module_param_attrs() into the CONFIG_MODULES section, since it's only used inside there. Thus avoiding the warning kernel/params.c:514: warning: 'free_module_param_attrs' defined but not used Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23Merge branch 'proc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc * 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc: (35 commits) proc: remove fs/proc/proc_misc.c proc: move /proc/vmcore creation to fs/proc/vmcore.c proc: move pagecount stuff to fs/proc/page.c proc: move all /proc/kcore stuff to fs/proc/kcore.c proc: move /proc/schedstat boilerplate to kernel/sched_stats.h proc: move /proc/modules boilerplate to kernel/module.c proc: move /proc/diskstats boilerplate to block/genhd.c proc: move /proc/zoneinfo boilerplate to mm/vmstat.c proc: move /proc/vmstat boilerplate to mm/vmstat.c proc: move /proc/pagetypeinfo boilerplate to mm/vmstat.c proc: move /proc/buddyinfo boilerplate to mm/vmstat.c proc: move /proc/vmallocinfo to mm/vmalloc.c proc: move /proc/slabinfo boilerplate to mm/slub.c, mm/slab.c proc: move /proc/slab_allocators boilerplate to mm/slab.c proc: move /proc/interrupts boilerplate code to fs/proc/interrupts.c proc: move /proc/stat to fs/proc/stat.c proc: move rest of /proc/partitions code to block/genhd.c proc: move /proc/cpuinfo code to fs/proc/cpuinfo.c proc: move /proc/devices code to fs/proc/devices.c proc: move rest of /proc/locks to fs/locks.c ...
2008-10-23ext4: remove unused variable in ext4_get_parentChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> [ All users removed in "switch all filesystems over to d_obtain_alias", aka commit 440037287c5ebb07033ab927ca16bb68c291d309 ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23[ARM] 5321/1: Kirkwood: fix typo in MakefileNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-23pcc-acpi: fix compile with new stricter ACPI typesLinus Torvalds
This was another merge problem that wasn't a data conflict, but due to independent changes in two branches that just didn't work together. The pcc-acpi staging driver used acpi_driver_data(device) = hotkey; to set driver data, but the ACPI merge made that invalid in commit db89b4f0dbab837d0f3de2c3e9427a8d5393afa3 ("ACPI: catch calls of acpi_driver_data on pointer of wrong type"), and now you're supposed to just do. device->driver_data = hotkey; instead. Fix it up. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23ext3 quota support: fix compile failureLinus Torvalds
This one was due to a merge error: we added a use of nd.path in commit 2d7c820e56ce83b23daee9eb5343730fb309418e ("ext3: add checks for errors from jbd"), and concurrently we got rid of 'nd' and used a naked 'path' in commit 8264613def2e5c4f12bc3167713090fd172e6055 ("[PATCH] switch quota_on-related stuff to kern_path()"). That all merged cleanly, but it didn't actually _work_. This should fix it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 06:30:12 +0000