aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-11-16ppp: fix BUG on non-linear SKB (multilink receive)Ben McKeegan
PPP does not correctly call pskb_may_pull() on all necessary receive paths before reading the PPP protocol, thus causing PPP to report seemingly random 'unsupported protocols' and eventually trigger BUG_ON(skb->len < skb->data_len) in skb_pull_rcsum() when receiving multilink protocol in non-linear skbs. ppp_receive_nonmp_frame() does not call pskb_may_pull() before reading the protocol number. For the non-mp receive path this is not a problem, as this check is done in ppp_receive_frame(). For the mp receive path, ppp_mp_reconstruct() usually copies the data into a new linear skb. However, in the case where the frame is made up of a single mp fragment, the mp header is pulled and the existing skb used. This skb was then passed to ppp_receive_nonmp_frame() without checking if the encapsulated protocol header could safely be read. Signed-off-by: Ben McKeegan <ben@netservers.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16ixgbe: Fixing EEH handler to handle more than one errorBreno Leitao
After commmit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff EEH breaks after the second error, since it calls pci_restore_state() but it returns 0, since pci->state_saved is false. So, this patch just call pci_save_state() after pci_restore_state(). Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-11-16net: Fix the rollback test in dev_change_name()Eric Dumazet
net: Fix the rollback test in dev_change_name() In dev_change_name() an err variable is used for storing the original call_netdevice_notifiers() errno (negative) and testing for a rollback error later, but the test for non-zero is wrong, because the err might have positive value as well - from dev_alloc_name(). It means the rollback for a netdevice with a number > 0 will never happen. (The err test is reordered btw. to make it more readable.) Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15Revert "isdn: isdn_ppp: Use SKB list facilities instead of home-grown ↵David S. Miller
implementation." This reverts commit 38783e671399b5405f1fd177d602c400a9577ae6. It causes kernel bugzilla #14594 Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15TI Davinci EMAC : Fix Console Hang when bringing the interface downSriram
In the NAPI poll function(emac_poll), check for netif_running() is unnecassary. In addition to associated runtime overhead, it also results in a continuous softirq loop when the interface is brought down under heavy traffic(tested wit Traffic Generator). Once the interface is disabled, the poll function always returns zero(with the check for netif_running) and napi_complete() would never get called resulting in softirq loop. Signed-off-by: Sriramakrishnan <srk@ti.com> Acked-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15smsc911x: Fix Console Hang when bringing the interface down.Sriram
In the NAPI poll function, check for netif_running() is unnecassary. In addition to associated runtime overhead, it also results in continuous softirq loop when the interface is brought down under heavy traffic(tested with Traffic Generator).Once the interface is disabled, the poll function always returns zero(with the check for netif_running) and napi_complete() would never get called resulting in softirq loop. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15mISDN: fix error return in HFCmulti_init()Roel Kluin
The returned error should stay negative Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15forcedeth: mac address fixStanislav O. Bezzubtsev
Use the existing random_ether_addr() to generate random MAC instead of doing it by-hand. Signed-off-by: Stanislav O. Bezzubtsev <stas@lvk.cs.msu.su> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15r6040: fix version printingFlorian Fainelli
The version string already contains the printk level specifying it again results in the following message being printed: <6>r6040: RDC R6040 NAPI ... Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6
2009-11-16Bluetooth: Fix regression with L2CAP configuration in Basic ModeGustavo F. Padovan
Basic Mode is the default mode of operation of a L2CAP entity. In this case the RFC (Retransmission and Flow Control) configuration option should not be used at all. Normally remote L2CAP implementation should just ignore this option, but it can cause various side effects with other Bluetooth stacks that are not capable of handling unknown options. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-11-16Bluetooth: Select Basic Mode as default for SOCK_SEQPACKETGustavo F. Padovan
The default mode for SOCK_SEQPACKET is Basic Mode. So when no mode has been specified, Basic Mode shall be used. This is important for current application to keep working as expected and not cause a regression. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-11-16Bluetooth: Set general bonding security for ACL by defaultAndrei Emeltchenko
This patch fixes double pairing issues with Secure Simple Paring support. It was observed that when pairing with SSP enabled, that the confirmation will be asked twice. http://www.spinics.net/lists/linux-bluetooth/msg02473.html This also causes bug when initiating SSP connection from Windows Vista. The reason is because bluetoothd does not store link keys since HCIGETAUTHINFO returns 0. Setting default to general bonding fixes these issues. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-11-13r8169: Fix receive buffer length when MTU is between 1515 and 1536Raimonds Cicans
In r8169 driver MTU is used to calculate receive buffer size. Receive buffer size is used to configure hardware incoming packet filter. For jumbo frames: Receive buffer size = Max frame size = MTU + 14 (ethernet header) + 4 (vlan header) + 4 (ethernet checksum) = MTU + 22 Bug: driver for all MTU up to 1536 use receive buffer size 1536 As you can see from formula, this mean all IP packets > 1536 - 22 (for vlan tagged, 1536 - 18 for not tagged) are dropped by hardware filter. Example: host_good> ifconfig eth0 mtu 1536 host_r8169> ifconfig eth0 mtu 1536 host_good> ping host_r8169 Ok host_good> ping -s 1500 host_r8169 Fail host_good> ifconfig eth0 mtu 7000 host_r8169> ifconfig eth0 mtu 7000 host_good> ping -s 1500 host_r8169 Ok Bonus: got rid of magic number 8 Signed-off-by: Raimonds Cicans <ray@apollo.lv> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13can: add the missing netlink get_xstats_size callbackWolfgang Grandegger
This patch adds the missing "get_xstats_size" callback for the netlink interface, which is required if "fill_xstats" is used, as pointed out by Patrick McHardy. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13can: Fix driver Kconfig structureOliver Hartkopp
In 2.6.32-rc the new EMS USB CAN driver was contributed and added the Kconfig entry right behind an entry of the same *vendor*. This teared the SJA1000 based driver selection into pieces. This fix cleans up the 2.6.32-rc Kconfig files for the CAN drivers and moves the SJA1000 and USB Kconfig portions into the belonging directories. As there are many new CAN drivers in the queue getting this cleanup into 2.6.32-rc would massively reduce the problems for the upcoming drivers. Thanks, Oliver Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13ipmr: missing dev_put() on error path in vif_add()Dan Carpenter
The other error paths in front of this one have a dev_put() but this one got missed. Found by smatch static checker. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Wang Chen <ellre923@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13s2io: fixing a ethtool test that is brokenBreno Leitao
Due commit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff, it is not more possible to pci_restore_state() more than once without calling pci_save_state() in the middle. Actually running a ethtool test on s2io makes the card inactive, and it needs to unload/reload the module to fix. This patch just save the state just after it restore in order to keep the old behaviour Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13sctp: Set socket source address when additing first transportVlad Yasevich
Recent commits sctp: Get rid of an extra routing lookup when adding a transport and sctp: Set source addresses on the association before adding transports changed when routes are added to the sctp transports. As such, we didn't set the socket source address correctly when adding the first transport. The first transport is always the primary/active one, so when adding it, set the socket source address. This was causing regression failures in SCTP tests. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13sctp: Fix regression introduced by new sctp_connectx apiVlad Yasevich
A new (unrealeased to the user) sctp_connectx api c6ba68a26645dbc5029a9faa5687ebe6fcfc53e4 sctp: support non-blocking version of the new sctp_connectx() API introduced a regression cought by the user regression test suite. In particular, the API requires the user library to re-allocate the buffer and could potentially trigger a SIGFAULT. This change corrects that regression by passing the original address buffer to the kernel unmodified, but still allows for a returned association id. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13sctp: Set source addresses on the association before adding transportsVlad Yasevich
Recent commit 8da645e101a8c20c6073efda3c7cc74eec01b87f sctp: Get rid of an extra routing lookup when adding a transport introduced a regression in the connection setup. The behavior was different between IPv4 and IPv6. IPv4 case ended up working because the route lookup routing returned a NULL route, which triggered another route lookup later in the output patch that succeeded. In the IPv6 case, a valid route was returned for first call, but we could not find a valid source address at the time since the source addresses were not set on the association yet. Thus resulted in a hung connection. The solution is to set the source addresses on the association prior to adding peers. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13MAINTAINERS: RFKILL - Fix pattern entry missing colonJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-13p54usb: Remove DMA buffer from stackLarry Finger
On 2.6.32-rc6 from wireless-testing, the following warning is emitted: ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:860 check_for_stack+0xaa/0xe0() Hardware name: HP Pavilion dv2700 Notebook PC ehci_hcd 0000:00:02.1: DMA-API: device driver maps memory fromstack [addr=ffff8800b6e2bca8] Modules linked in: <Removed> Pid: 16378, comm: modprobe Not tainted 2.6.32-rc6-wl #244 Call Trace: [<ffffffff81049698>] warn_slowpath_common+0x78/0xb0 [<ffffffff8104972c>] warn_slowpath_fmt+0x3c/0x40 [<ffffffff811ae52a>] check_for_stack+0xaa/0xe0 [<ffffffff811afc8d>] debug_dma_map_page+0xfd/0x170 [<ffffffffa006297a>] usb_hcd_submit_urb+0x3da/0x9c0 [usbcore] [<ffffffff81076e6f>] ? lockdep_init_map+0x5f/0x5d0 [<ffffffffa0063365>] usb_submit_urb+0xe5/0x260 [usbcore] [<ffffffffa0064b7e>] usb_start_wait_urb+0x5e/0xf0 [usbcore] [<ffffffffa0063943>] ? usb_init_urb+0x23/0x40 [usbcore] [<ffffffffa0064cd4>] usb_bulk_msg+0xc4/0x150 [usbcore] [<ffffffffa0441a91>] T.719+0x31/0x40 [p54usb] [<ffffffffa0441acf>] p54u_upload_firmware_3887+0x2f/0x490 [p54usb] [<ffffffffa049c667>] ? p54_parse_firmware+0x427/0x450 [p54common] <Rest of traceback removed> ---[ end trace f77df0316ddad3de ]--- Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-13rt2x00: Update MAINTAINERSGertjan van Wingerde
Add myself to the list of maintainers for the rt2x00 driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-13Revert "libipw: initiate cfg80211 API conversion"John W. Linville
This reverts commit b8ecd988b1670035a05035c553c08331214d6603. Due to poor API call balancing by me, this commit not only broke ipw2200 if it can't find it's firmware, it broke ipw2100 basically anytime you removed the module. At this point in the cycle, let's just put it back to a sane state and try again next time... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-13tcp: provide more information on the tcp receive_queue bugsIlpo Järvinen
The addition of rcv_nxt allows to discern whether the skb was out of place or tp->copied. Also catch fancy combination of flags if necessary (sadly we might miss the actual causer flags as it might have already returned). Btw, we perhaps would want to forward copied_seq in somewhere or otherwise we might have some nice loop with WARN stuff within but where to do that safely I don't know at this stage until more is known (but it is not made significantly worse by this patch). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-10iwlwifi: Fix issue on file transfer stalled in HT modeWey-Yi Guy
Turn on RTS/CTS for HT to prevent uCode TX fifo underrun This is fix for http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2103 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Tested-by: Jiajia Zheng <jiajia.zheng@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-10iwlwifi: Use RTS/CTS as the preferred protection mechanism for 6000 seriesWey-Yi Guy
When 802.11g was introduced, we had RTS/CTS and CTS-to-Self protection mechanisms. In an HT Beacon, HT stations use the "Operating Mode" field in the HT Information Element to determine whether or not to use protection. The Operating Mode field has 4 possible settings: 0-3: Mode 0: If all stations in the BSS are 20/40 MHz HT capable, or if the BSS is 20/40 MHz capable, or if all stations in the BSS are 20 MHz HT stations in a 20 MHz BSS Mode 1: used if there are non-HT stations or APs using the primary or secondary channels Mode 2: if only HT stations are associated in the BSS and at least one 20 MHz HT station is associated. Mode 3: used if one or more non-HT stations are associated in the BSS. When in operating modes 1 or 3, and the Use_Protection field is 1 in the Beacon's ERP IE, all HT transmissions must be protected using RTS/CTS or CTS-to-Self. By default, CTS-to-self is the preferred protection mechanism for less overhead and higher throughput; but using the full RTS/CTS will better protect the inner exchange from interference, especially in highly-congested environment. For 6000 series WIFI NIC, RTS/CTS protection mechanism is the recommended choice for HT traffic based on the HW design. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-10Libertas: fix issues while configuring host sleep using ethtool wolBing Zhao
Configuration of wake-on-lan for unicast, multicast, broadcast, physical activity was not working. Kernel panic issue was there when user tries to disable WOL. Fixed them. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-10Libertas: coding style cleanup in ethtool.cBing Zhao
Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-10rtl8187: Fix sparse warningsLarry Finger
Due to a missing header include, sparse generates the following warnings: CHECK drivers/net/wireless/rtl818x/rtl8187_rfkill.c warning: symbol 'rtl8187_rfkill_init' was not declared. Should it be static? warning: symbol 'rtl8187_rfkill_poll' was not declared. Should it be static? warning: symbol 'rtl8187_rfkill_exit' was not declared. Should it be static? Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-10ath5k: add LED definition for BenQ Joybook R55vBob Copeland
Setup the GPIOs for the BenQ Joybook netbook. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-10ath5k: add LED support for HP Compaq CQ60Bob Copeland
Add GPIO configuration for the Compaq CQ60 laptop Reported-by: David Dreggors <ddreggors@jumptv.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-10ath5k: don't reset mcast filter when configuring the modeBob Copeland
We should not zero out the multicast hash when configuring the operating mode, since a zero value means all multicast frames will get dropped. Also, ath5k_mode_setup() gets called after any reset, so the hash already set up in configure_filter() is lost. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-10rt2x00: update MAINTAINERSIvo van Doorn
Although I have always been the active maintainer of the rt2x00 drivers, I was not mentioned explicitely in the MAINTAINERS file as such. Update the rt2x00 entry in the MAINTAINERS file to add my name and email address. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-10b43: work around a locking issue in ->set_tim()Felix Fietkau
ops->set_tim() must be atomic, so b43 trying to acquire a mutex leads to a kernel crash. This patch trades an easy to trigger crash in AP mode for an unlikely race condition. According to Michael, the real fix would be to allow set_tim() to sleep, since b43 is not the only driver that needs to sleep in all callbacks. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-10ssb-pcmcia: Fix 32bit register access in early bus scanningMartin Fuzzey
The scan function was using 32 bit access which does not work on 16bit CF cards. This patch corrects this by doing two 16 bit reads like ssb_pcmcia_read32 already does. mb -- Removed locking. That early in init there's no need for locking. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-08net/fsl_pq_mdio: add module license GPLSebastian Siewior
or it will taint the kernel and fail to load becuase of_address_to_resource() is GPL only. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-08can: fix WARN_ON dump in net/core/rtnetlink.c:rtmsg_ifinfo()Wolfgang Grandegger
On older kernels, e.g. 2.6.27, a WARN_ON dump in rtmsg_ifinfo() is thrown when the CAN device is registered due to insufficient skb space, as reported by various users. This patch adds the rtnl_link_ops "get_size" to fix the problem. I think this patch is required for more recent kernels as well, even if no WARN_ON dumps are triggered. Maybe we also need "get_xstats_size" for the CAN xstats. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-08can: should not use __dev_get_by_index() without locksEric Dumazet
bcm_proc_getifname() is called with RTNL and dev_base_lock not held. It calls __dev_get_by_index() without locks, and this is illegal (might crash) Close the race by holding dev_base_lock and copying dev->name in the protected section. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06hisax: remove bad udelay call to fix build error on ARMMartin Michlmayr
The hisax ISDN driver fails to build on ARM with CONFIG_HISAX_ELSA: | drivers/built-in.o: In function `modem_set_dial': | drivers/isdn/hisax/elsa_ser.c:535: undefined reference to `__bad_udelay' | drivers/isdn/hisax/elsa_ser.c:544: undefined reference to `__bad_udelay' | drivers/built-in.o: In function `modem_set_init': | drivers/isdn/hisax/elsa_ser.c:486: undefined reference to `__bad_udelay' | [...] According to the comment in arch/arm/include/asm/delay.h, __bad_udelay is specifically designed on ARM to produce a build failure when udelay is called with a value > 2000. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06ipip: Fix handling of DF packets when pmtudisc is OFFHerbert Xu
RFC 2003 requires the outer header to have DF set if DF is set on the inner header, even when PMTU discovery is off for the tunnel. Our implementation does exactly that. For this to work properly the IPIP gateway also needs to engate in PMTU when the inner DF bit is set. As otherwise the original host would not be able to carry out its PMTU successfully since part of the path is only visible to the gateway. Unfortunately when the tunnel PMTU discovery setting is off, we do not collect the necessary soft state, resulting in blackholes when the original host tries to perform PMTU discovery. This problem is not reproducible on the IPIP gateway itself as the inner packet usually has skb->local_df set. This is not correctly cleared (an unrelated bug) when the packet passes through the tunnel, which allows fragmentation to occur. For hosts behind the IPIP gateway it is readily visible with a simple ping. This patch fixes the problem by performing PMTU discovery for all packets with the inner DF bit set, regardless of the PMTU discovery setting on the tunnel itself. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06qlge: Set PCIe reset type for EEH to fundamental.Ron Mercer
This device requires a fundamental reset when recovering from EEH. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06qlge: Fix early exit from mbox cmd complete wait.Ron Mercer
This line was accidentally left out of the previous commit # da03945140a035a2962f7f93e359085596f20499 ("qlge: Fix firmware mailbox command timeout."). Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06ixgbe: fix traffic hangs on Tx with ioatdma loadedDon Skidmore
When ioatdma was loaded we we were unable to transmit traffic. We weren't using the correct registers in ixgbe_update_tx_dca for 82599 systems. Likewise in ixgbe_configure_tx() we weren't disabling the arbiter before modifying MTQC. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06ixgbe: Fix checking TFCS register for TXOFF status when DCB is enabledYi Zou
When DCB is enabled, the ixgbe_check_tx_hang() should check the corresponding TC's TXOFF in TFCS based on the TC that the tx ring belongs to. Adds a function to map from the tx_ring hw reg_idx to the correspodning TC and read TFCS accordingly. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06ixgbe: Fix gso_max_size for 82599 when DCB is enabledYi Zou
The 32k gso_max_size when DCB is enabled is for 82598 only, not for 82599. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06macsonic: fix crash on PowerBook 520Finn Thain
No-one seems to know where the PowerBook 500 series store their ethernet MAC addresses. So, rather than crash, use a MAC address from the SONIC CAM. Failing that, generate a random one. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06NET: cassini, fix lock imbalanceJiri Slaby
Stanse found that one error path in cas_open omits to unlock pm_mutex. Fix that. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 03:27:30 +0000